The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the United States part of the international study.

The United States MEPS (musculoskeletal--eyestrain--psychosocial--stress) study consisted of 1 group of 28 female data entry operators. The intervention was in 3 parts: workstation redesign (including advanced ergonomic chairs, motorized adjustable workstations, advanced adjustable keyboards, adjustable copyholders, adjustable footrests, monitor support surfaces) and ergonomic training/coaching and corrective lenses. After the intervention, statistically significant reductions in physical signs (trigger points, neck and shoulder mobility), subjective reports of intensity and frequency of musculoskeletal pain, and subjective reports of visual problems were observed. Static load during the work sample, as assessed by experts, improved after the intervention as did measured postural angles of head and trunk and subjective assessment of users of ergonomic characteristics of the workplaces. For all of these measures, improvements observed 1 month after intervention were also observed in the 1-year follow-up. Trapezius load, as assessed by electromyography (EMG), decreased after intervention, but then increased in the follow-up. The increase was interpreted as a calibration problem.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial and visual strain of VDT entry work: organization and methodology of the international study.

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal--eyestrain--psychosocial--stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

The Effect of an Ergonomic Intervention on Musculoskeletal,Psychosocial and Visual Strain of VDT Entry Work: Organization and Methodology of the International Study

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal—eyestrain—psychosocial—stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

The effect of an ergonomic intervention on musculoskeletal, psychosocial and visual strain of VDT data entry work: the Norwegian part of the international study.

The Norwegian MEPS (musculoskeletal--visual--psychosocial--stress) study included 3 groups: data entry, data dialogue (female) and data dialogue (male). Before intervention, the data entry group reported significantly more symptoms and signs of musculoskeletal illness and had longer periods in front of the video display terminal (VDT) without a break. The ergonomic intervention consisted mainly of ergonomic information and training. After intervention, the data dialogue female group reported a significant reduction in shoulder pain in parallel with a reduction in trapezius load. Increasing the understanding in how to adjust the work stand and chair may have been contributing factors to reducing the pain level. There was a significant reduction in eye problems in all groups; the greatest reduction in eye symptoms was seen in the groups who had new optometric corrections.     

An Ergonomics Study of a Semiconductors Factory in an IDC for Improvement in Occupational Health and Safety

The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers’ occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers’ OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.     

Sitting Comfort of Ergonomic Office Chairs—Developed Versus Intuitive Evaluation

The sitting comfort of office chairs with different ergonomic layouts (inferior, superior) was examined. Fifty participants were randomly assigned to a 2 × 5 factorial experimental design with 2 different conditions of ergonomic chair layout (inferior or superior) and 5 different conditions of instruction to explore the chair. Four conditions were created to differentiate between various levels of perceptual awareness and processing of chair-related information (guided exploration and developed evaluation). In a 5th condition, participants remained uninstructed (free exploration and intuitive exploration). Under guided exploration, the participants’ perception of sitting comfort was in line with objective differences in the chair layout. Different conditions of guided exploration, however, did not influence the evaluations. Under free exploration, the participants’ perceptions did not match the ergonomic chair layout. In contrast to participants under guided exploration, they even rated the ergonomically inferior office chair more favourably than the ergonomically superior chair.     

Visual Strain and Lighting Preferences of VDT Users Under Different Lighting Systems

Lighting influences users’ visual strain and well-being. Therefore creating lighting that ensures visual work conditions do not result in visual fatigue is a preventive activity. The aim of the study was to model different lighting systems for visual display terminal (VDT) work and to determine their influence on users’ visual strain and preferences. The results of the study showed that visual fatigue was lowest for indirect and compound lighting systems. On the other hand, in general, direct lighting realized by “dark-light” luminaires was the most preferred lighting system. Some interesting differences related to age, gender, and VDT work experience were found. On the basis of the obtained results lighting designers can be provided with some guidance.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Office Ergonomics: Deficiencies in Computer Workstation Design

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.     

Office ergonomics: deficiencies in computer workstation design.

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.     

Luminance of the Surround and Visual Fatigue of VDT Operators

Luminance distribution in the visual field is considered as one of causal factors with a significant influence on visual fatigue, especially for intensive and extended Video Display Terminal (VDT) work. The aim of the study was to define visual fatigue of VDT operators for different values of surrounding luminance. Experiments were carried out in laboratory conditions under 3 lighting conditions. Only 1 lighting parameter—the luminance of the wall behind the display (surrounding luminance)—changed. Visual fatigue was measured both by a subjective evaluation of different visual complaints (asthenopic symptoms) and by objective measurements of changes in the following visual functions: accommodation, convergence, habitual horizontal phoria, critical fusional frequency (CFF), and visual acuity. The same experiments were done for CRT (Cathode Ray Tube) and LCD TFT (Liquid Crystal Display with Thin Film Transistor) screens. The results of the study have shown that there was no significant influence of the value of surrounding luminance on the asthenopic symptoms for either type of screen. A general tendency towards bigger visual complaints for LCD TFT than for CRT participants was found. An objective evaluation of visual fatigue demonstrated a tendency towards bigger changes in visual functions with an increase of surrounding luminance for both screens. Statistical analysis of the results has shown that surrounding luminance influences significantly the reduction of the accommodation amplitude (significance level < .05).     

机械行业工效学调查研究

对机械行业工人的慢性肌肉骨骼损伤进行了工效学分析。结果表明，目前我国机械行业工人主要存在的工效学问题是：坐椅高度和坐位工作台高度较高，正常作业范围过大，同一动作持续工作时间过长、劳动时间率偏高、工中休息时间偏少。建议根据有关法规和标准，采取工效学改进措施     

Effects of Neutral Posture on Muscle Tension During Computer Use

This study focused on developing a new approach to seated work positions as conducted on 67 office workers who use a Visual Display Terminal (VDT) as a major function of their working day. Muscle tension was measured by surface electromyography (sEMG) while participants were asked to adopt 4 selected working postures. Pain was measured before and after ergonomic intervention on the Nordic scale, which was modified for this study. Adjustable workstations were used to place participants in desired positions during the clinical testing sessions and the extended intervention period. Results indicate the effects of this ergonomic intervention may have positive effects on muscle tension and pain, significant enough to encourage employers to implement training and workstation modifications following these guidelines.     

Ergonomic Program Effectiveness: Ergonomic and Medical Intervention

The implementation of a successful ergonomic and medical intervention program designed to reduce the number and severity of injuries and illnesses and the associated levels of discomfort in the workplace is presented. Because of the recent activity concerning the on-again-off-again Occupational Safety and Health Administration (OSHA) Ergonomic Program Standard questions have been raised as to the value and effectiveness of an organization’s ergonomics program. In light of these concerns, the immense cost associated with work-related injury and illness, and the related pain and suffering associated with such injuries and illnesses, it is important to present a workable and effective ergonomic and medical intervention program. The results of this applied study demonstrate that through the application of an ergonomic and medical intervention program, workplace-related injuries and illnesses can be reduced or eliminated.     

Comparisons of ergonomic evaluation tools (ALLA,RULA, REBA and OWAS) for farm work

Introduction. The purpose of this study was to validate the agricultural lower limb assessment (ALLA) ergonomic checklist, which was developed for various agricultural tasks in Korea. Methods. One hundred and ninety-six working postures were selected from the real agricultural tasks to verify ALLA, a lower limb body posture assessment tool, and then evaluated by 16 ergonomic experts. Hit rate, quadratic weighted κ, one-way analysis of variance and t-test analyses were applied to compare ALLA with other assessment tools. Results. ALLA analysis had a superior hit rate with ergonomic expert assessment compared with other assessment tools. Quadratic weighted κ analysis also showed that ALLA provided superior estimates of risk levels for farm working postures. Discussion. ALLA would be an appropriate assessment tool to estimate risk factors for various lower limb body postures which frequently occur in agricultural tasks in Korea. ALLA is a simple and accurate risk assessment tool that could be usefully applied to identify and mitigate risk factors and work-related musculoskeletal disorders in agricultural tasks, and also to evaluate the effects of control and intervention for working conditions.     

塔机起重作业夜间照明工效的BIM辅助优化研究

为提升塔式起重机施工作业的夜间照明工效水平,采用数学模型和BIM技术相结合的方法,以灯源的光通量及入射角为光学驱动参数,模拟眩光值、照度及其均匀度等光学变量,建立照明工效的光度学BIM辅助优化模型,优化起重作业照明灯源光学参数。研究结果表明：对塔式起重机施工作业区照明灯源光学参数进行组合优化后,夜间起重作业面照度及其均匀度显著提升,眩光值满足起重作业视觉环境条件。研究结果可为塔式起重机夜间起重作业照明方案设计提供科学依据。     

人机显示/控制界面适配性综合评价指标和评价方法

通过对驾驶舱人机显示 /控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究 ,建立了一套视觉信息流工效综合评估系统研究体系 ;研究的初步结果主要有 ,飞机驾驶员视域中存在最佳、较好、极限工效区 ,并且振动、反射眩光、噪声、显示字符的形状 /颜色特征 /对比度 /显示方式等是影响信息获取工效的主要因素 ;飞机驾驶舱显示布局及显示方式应符合视觉工效学设计原则。     

Working conditions,psychological/physical symptoms and occupational accidents. Bayesian network models

Each day thousands of workers suffer occupational accidents of varying degrees of severity. Accidents at work render workers incapable of carrying out their day to day activities, either temporarily or permanently, and they also have detrimental effects on family life, the company, and the general public. In order to reduce the occupational accident rate, it is necessary to determine the causes of those accidents. Although there are many different types of accidents, they generally stem from poor working conditions. The purpose of this study was to analyze the influence of working conditions on occupational accidents from data gathered in the VI National Survey of Working Conditions (VI NSWCs) in 2007. This survey utilized a random sample of the active population of Spain. The sample comprised 11,054 people (5917 males and 5137 females). In order to carry out the study, a probabilistic model was built using Bayesian networks. The model included the following variables: hygiene conditions, ergonomic conditions, job demands, physical symptoms, psychological symptoms, and occupational accidents. The study demonstrated that there were strong relationships between hygiene conditions and occupational accidents; it has been shown that poor hygienic conditions duplicate the probability of accident. Physical symptoms increased almost 50% due to poor ergonomic conditions. And finally, high job demands almost duplicated the psychological symptoms. The investigation also showed a high degree of interdependence between physical and psychological symptomatologies and the relationship between these and occupational accidents.     

Major Health Risk Factors in Iranian Hand-Woven Carpet Industry

This paper reviews the role and importance of small-scale industries together with the issue of occupational health problems and their causes in Iranian hand-woven carpet industry as a typical informal small-scale industry in an industrially developing country. The objective ofthis paper is to review health risk factors and related occupational health and ergonomic problems in the carpet industry. Since the overwhelming majority of weavers’ health problems originate from ergonomic risk factors, it is concluded that any improvement program in this industry should focus on ergonomic aspects. To assess ergonomic conditions in weaving workshops, a checklist has been developed and an ergonomics index indicating the ergonomic conditions of the workshop has been proposed. To test and verify the checklist, 50 weaving workshops were visited and their ergonomic conditions were assessed. Based on the results some modifications were made and the checklist was shown to be an effective tool.     

Visual Costs of the Inhomogeneity of Luminance and Contrast by Viewing LCD-TFT Screens Off-Axis

In this study the anisotropic characteristics of TFT-LCD (Thin-Film-Transistor- Liquid Crystal Display) screens were examined. Anisotropy occurs as the distribution of luminance and contrast changes over the screen surface due to different viewing angles. On the basis of detailed photometric measurements the detection performance in a visual reaction task was measured in different viewing conditions. Viewing angle (0°, frontal view; 30°, off-axis; 50°, off-axis) as well as ambient lighting (a dark or illuminated room) were varied. Reaction times and accuracy of detection performance were recorded. Results showed TFT’s anisotropy to be a crucial factor deteriorating performance. With an increasing viewing angle performance decreased. It is concluded that TFT’s anisotropy is a limiting factor for overall suitability and usefulness of this new display technology.