Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.     

Preconcentration of some trace metal ions on coated alumina modified by 1-((6-(-(2-hydroxynaphthalen-1-yl)methyleneamino) hexylimino) methyl) naphthalen-2-ol

A sensitive and efficient method for preconcentration of trace amounts of some metal ions such as Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Cr³⁺, and Fe³⁺ ions based on modification of sodium-dodecyl-sulphate (SDS) coated alumina with 1-(6-(-(2-hydroxynaphthalen-1-yl) methyleneamino) hexylimino) methyl) naphthalen-2-ol (HNMAHN) is reported. The method is based on the uptake of these ions following their chelation with HNMAHN and their recovery using a suitable eluent. The influence of parameters such as pH, concentration of ligand and amount of coated alumina, SDS concentration, eluent (type and concentrations), and elution volume on metal ion recoveries are investigated. The preconcentration factor is 150 (10?mL elution volume) for a 1500?mL sample volume. The method has been successfully applied for extraction and determination of these ions content in some real samples. Extraction efficiency is generally >95% with low relative standard deviations between 1.8% and 2.4 %.     

Biosorbents for solid-phase extraction of toxic elements in waters

Some trace metals are highly toxic for the environment. There is therefore a need for reliable methods for the determination of metals at trace levels. To this end, new sample pretreatment methods such as separation, preconcentration and speciation prior to the determination of metal ions have developed rapidly. Biosorption has become a major tool for solid-phase extraction methods. This review covers selected biosorbents such as algae, bacteria, filamentous fungi and yeasts, as new sorbents used in the solid-phase extraction of metal ions from various water sample matrices. A survey of the literature over 2004-2014 shows possible applications of selected new sorbents available for use in trace metal analysis in waters using solidphase extraction. We highlight the preconcentration of the toxic elements prior to their determination by atomic spectrometry.     

Amberlite XAD-7 impregnated with morpholine dithiocarbamate as trace metal extractant

Application of Amberlite XAD-7 impregnated with morpholine dithiocarbamate (MDTC) for separation and preconcentration of trace amounts of lead, copper, cobalt, iron, nickel, cadmium and zinc and determination by ICP-AES has been described. The optimum experimental parameters, such as pH, sample flow rate, eluent and effect of matrix ions on the preconcentration were investigated. Simultaneous enrichment of the seven metals was accomplished. The t _1/2 values for sorption are 2.9, 3.3, 3.7, 3.6, 2.8, 4.1 and 2.8 respectively for Pb(II), Cu(II), Co(II), Fe(III), Ni(II), Cd(II) and Zn(II). The method was applied for the determination of trace metal ions in seawater and natural water samples. The results have been compared with extraction GFAAS method.     

Dispersive liquid–liquid microextraction of cadmium(II) for preconcentration prior to flame atomic absorption spectrometric detection in water

A dispersive liquid–liquid microextraction procedure for cadmium(II) as its 2-(5-bromo-2-pyridylazo)-5-diethylamino-phenol chelate is presented. Carbon tetrachloride and methanol were used as extraction and dispersive solvents, respectively. After phase separation, the preconcentrated-separated cadmium(II) is determined by flame atomic absorption spectrometry with a microinjection technique. The factors which affected the extraction efficiency, i.e. the pH of the sample solution and the volumes of reagent and sample were investigated. The effects of some alkali, alkali earth, and transition metal ions, and of some anions on the recovery of cadmium were also studied. A preconcentration factor of 250 was obtained for a sample volume of 50?mL under optimum conditions. The method was validated by analysis of certified reference materials and applied to some water samples from Turkey.     

Biosorption of chromium(VI), nickel(II) and copper(II) ions from aqueous solutions using Pithophora algae

The biosorption of heavy metals is considered to be one of the best alternatives for the treatment of wastewater. The metal binding capacity of algae and acid-treated algae is investigated to find out the removal characteristics of Cr(VI), Ni(II) and Cu(II) ions from single metal solutions. Batch experiments are conducted and the study is extended to investigate the effect of pH, amount of adsorbent and adsorbate concentration on the extent of biosorption. The results indicate that the adsorption capacity of algae depends strongly on pH. The maximum adsorption of Cr(VI), Ni(II) and Cu(II) occurs at pH values of 2, 7 and 4.3, respectively. The adsorption process follows first-order kinetic equation. The data obtained are correlated with Freundlich and Langmuir adsorption isotherms.     

Synthesis of 2,3-dihydroxynaphthalene-functionalized Amberlite XAD-4 resin: Applications for the separation and preconcentration of trace metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry

A simple, sensitive column solid-phase extraction procedure for separation and preconcentration of Cu(II), Ni(II), Co(II), and Cd(II) in spiked and natural water samples using 2,3-dihydroxynaphthalene-functionalized Amberlite XAD-4 (XAD-4-DHN) chelating resin prior to their determination by inductively coupled plasma atomic emission spectrometry was discussed. The optimum experimental parameters such as pH, volume of sample and eluent, flow-rates of uptake and stripping, and sorption capacity of the chelating resin, were evaluated. The effect of the electrolytes and the cations on the preconcentration of metal ions was also investigated. The chelating resin could be reused for more than 20 cycles of sorption–desorption without any significant change (<1.0%). Recoveries obtained from this method range from 96 to 102% with R.S.D of 2.50 (n = 4). The detection limits for Cu(II), Ni(II), Co(II), and Cd(II) were found to be 1.9, 0.9, 1.2 µg, and 1.4 µg L^?1, respectively. The proposed method was applied for the determination of Cu(II), Ni(II), Co(II), and Cd(II) in spiked, tap water, and river water samples.     

Determination trace amounts of copper, nickel, cobalt and manganese ions in water samples after simultaneous separation and preconcentration

In the present article, a simple, rapid, sensitive and economical method has been developed for the simultaneous separation and preconcentration of the trace amounts of copper, nickel, cobalt and manganese in water samples by using modified XAD-4 resins. The sorption was quantitative in the pH range 6.0–9.0, whereas quantitative desorption occurred instantaneously with 5.0 mL of 2 M HNO₃, and selected elements have been determined by using flame atomic absorption spectrometry. Dynamic ranges were 0.04–3.5, 0.1–6.0, 0.04–4.5 and 0.04–4.0 μg/mL for copper, nickel, cobalt and manganese, respectively. The detection limits were 9.2, 28.6, 12.3 and 5.7 ng/mL for Cu(II), Ni(II), Co(II) and Mn(II), respectively. The effects of the experimental parameters, including the sample pH, eluent type, interference ions and breakthrough volume, were studied for separation and preconcentration of Cu(II), Ni(II), Co(II) and Mn(II) ions. Determination of these ions in standard samples confirmed that the proposed method has good accuracy. The proposed method was used for the determination of these ions in water samples.     

Online solid phase preconcentration using EGDMA–MAA copolymer for lead determination by FAAS

A Ethylene glycol dimethacrylate (EGDMA) methacrylic acid (MAA) resin was used for preconcentration of lead at trace levels in water samples. For this purpose, a flow-injection, solid phase extraction method was developed for the determination of lead by flame atomic absorption spectrometry. Lead ions were sorbed on a EGDMA–MAA column at pH 4, followed by an elution step using 288 µL of 4.0 M nitric acid solution and determination by flame atomic absorption spectrometry. Optimum conditions for quantitative sorption involving the pH, sample volume, loading and elution flow rates, eluent type, and volume were investigated. A 868-fold enrichment factor could be reached. The detection limit for the water samples, estimated from the noise on the signal obtained for 250 mL of 10 µg L^?1 loaded at 4.9 mL min^?1 was 1.04 µg L^?1. The method was applied for lead determination in river water samples collected in Edirne, Turkey. Recoveries of spiked solutions (10 µg L^?1) to river water samples were quantitative. Finally, the method was validated by the analysis of certified reference material SRM 2704 (Buffalo River Sediment).     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

发光菌的流动注射分析体系及其应用

本文以明亮发光杆菌作为污染物质毒性检测的指示生物，探讨了有机磷农药、酸、碱、分配等污染物对发光细菌的毒性作用；研究了ｐＨ值、温度对有机磷农药降解的影响；测定了该本系对水体中的部分重金属离子，无机离子、阴离子洗涤剂ＳＤＳ和大肠杆菌的检测灵敏度；并对采自于厦门市区的若干水样进行监测分析。     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Dissolved Ions of Trace and Major Elements and in Suspended Sediments in the Nile, Egypt

Dissolved ions and suspended participates from twelve water samples from Sohag (different localities) and Aswan (behind and below the High Dam) areas were collected along the River Nile, upper Egypt, which is at present affected seriously by pressure of population, intense industrial and agricultural activities, and atmospheric fallout. Eighteen trace and nine major ions in solution and fourteen metals in suspension were analyzed to establish whether elements are of anthropogenic or natural origin. Results of this study show that the Nile water was contaminated with high concentrations of dissolved lead, and with copper, nickel and mercury to a lesser extent, suggesting that these contaminants are generated from anthropogenic activities. the other dissolved ions in the Nile are of natural origin because their metal concentrations fall within the range of the normal background and average world dissolved values for inland waters. Results show that the usual constituents of suspended particulates in the Nile seem to be some metals (Cu and Zn) adsorbed on iron and manganese oxide/hydroxide. the results also reveal that most trace and major metal particulates increase from south to north due to activities associated with the dense population living along the Nile banks. No significant differences were observed between the chemical composition of trace and major elements taken on the east and west river Nile banks.     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.     

Biosorption of Cu (II) ions by indigenous copper-resistant bacteria isolated from polluted coastal environment

The concentrations of copper in water and sediment samples of Cuddalore coastal area, Tamil Nadu, India were examined. The isolation, characterization, screening, and metal sorption capabilities of copper-resistant bacteria (CURB) also were investigated. Biosorption capabilities and growth time varied among the resistant isolates. All isolates reduced more than 80% of copper from copper-treated broth. However, Bacillus cereus CURB-4 strain absorbed more copper ions (99.9%) than other resistant isolates. Changes in structural group position and synthesis of extracellular polysaccharides (EPS) of CURB-4 strain under copper stress and controlled conditions also were examined. Under copper stress condition, CURB-4 produced more EPS (71 ± 0.6%) compared to control conditions (66 ± 0.4%). Fourier transform infrared spectroscopy revealed that the changes in functional group position of EPS were observed in stressed condition. Overall, synthesis of EPS in bacteria is a protective barrier against environmental stress.     

卡尔曼滤波-分光光度法同时测定长江、嘉陵江地表水中微量铜、镉、锌和铅

以2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚为螯合剂,三氯甲烷为萃取剂,采用卡尔曼滤波和分光光度法同时分析长江和嘉陵江现场采集的地表水样中Cu~(2 ),Cd~(2 ),Zn~(2 )和Pb~(2 )的浓度.4种金属离子的实验室回收率在91.0%-113.1%之间;比较长江、嘉陵江国控点例行监测数据,本方法具有较好的可比性和可靠性,能直接应用于江河水样多种金属污染物的同时定量分析.     

Physicochemical properties of non-living water hyacinth (Eichhornia crassipes) and lesser duckweed (Lemna minor) and their influence on the As(V) adsorption processes

Eichhornia crassipes (Ec) and Lemna minor (Lm) are aquatic plants. They are considered as weeds of the water and approach being a scourge in many parts of the world, choking waterways and hindering transport upon them. At the same time they are known to readily remove heavy metal ions from water. This paper considers the use of non-living plants as novel and inexpensive biosorbent for the removal of As(V) from watersheds. In the first place they were conditioned and characterised to determine their physicochemical and surface properties and in the second place their adsorption properties for As(V) from aqueous solution were evaluated considering the toxicity of this metalloid in the environment. It describes the methodology to prepare the non-living biomasses; the physicochemical characterisation by SEM, XRD, FTIR, TGA analyses and surface characterisation of Ec and Lm by specific surface, hydration kinetic, point of zero charge determination by mass titration, active site density and XPS analysis are described. Both studied biomasses were found to be potential bio-sorbents for arsenic ions from aqueous solution. According to their efficiency to remove arsenic, they can be used in a very low cost metalloid ions removal system.     

TAR柱前络合、毛细管电泳分析痕量金属离子

1　IntroductionTransitionmetalswereamongthemostconcernelementsinenvironmentalanalysisduetotheirpotentialrolestoplantandanimals[1 ].Theserolesoftransitionmetalsinenvironmentdependedontheirconcentrationinthesoil,waterandlivingthings.Currently ,themostutiliz…     

Electrochemical hydride generation of tin(II) and its determination by electrothermal atomic absorption spectrometry with in situ trapping in the graphite tube atomizer

An electrolytic hydride generation system for the determination of tin(II) by means of batch electrochemical hydride generation-electrothermal atomic absorption spectrometry (EcHG-ETAAS) with in situ trapping in a graphite tube atomizer is described. The effects of four permanent chemical modifiers – palladium, tungsten, iridium, and platinum – for graphite tube treatment on analyte absorbance and the effects of four cathode materials, i.e., Pb, Sn, Pb–Sn alloy, and glassy carbon, are checked. Three electrolytes, i.e., nitric acid, sulfuric acid, and hydrochloric acid, are examined as catholyte solutions. The influence of several parameters on EcHG is investigated using multivariate and univariate methods. Interferences of some concomitant ions are evaluated. The calibration curve is linear from 1 to 200?µg?L^?1, with a detection limit of 0.8?µg?L^?1 and a relative standard deviation of 6.2% (n?=?3) for 100?µg?L^?1 Sn(II). The proposed method was successfully applied in the analysis of real environmental water samples and reference materials, and good spiked recoveries over the range of 93.1–115% were obtained. The proposed technique provides a means for developing hydride generation of other elements.     

Voltammetric analysis of metallothioneins and copper (II) in fish for water biomonitoring studies

An major research area in environmental chemistry is the development of methods for the analysis of biomarkers. Metallothioneins are used as biomarkers in studies of heavy metals exposure in water, because metallothioneins are synthesized and accumulated when organisms are exposed to toxic concentrations of pollutants. In this work, simple and sensitive voltammetric methods were developed for metallothionein and copper (II) determinations in fish liver Lepomis gibbosus. Both analytical methodologies were optimized and applied to samples extracted from individuals previously submitted to sub-lethal toxicological trials with copper sulphate (CuSO₄) and cadmium chloride (CdCl₂). The obtained results showed that both methods are very precise, sensitive, and involve simple sample preparation processes. Moreover, metallothioneins showed better correlation with the toxic exposure than Cu²⁺. To the best of our knowledge, this is the first time that hepatic metallothioneins and Cu²⁺ contents are voltammetrically determined in order to be compared in their function as heavy metal biological indicators.