Photochemical Behavior of Parathion in the Presence of Humic Acids from Different Origins

This paper reports the effect of ultraviolet radiation on the degradation of pesticide ethyl parathion in the presence of humic acids. Ethyl parathion was completely degraded in 300 min using an artificial lamp of 7.41 × 10^{? 10} einstein/s. Humic acid from peat did not influence the photochemical rate (k = 8.92 × 10^?3 min). However, in the presence of aquatic humic acid, the photochemical rate was higher (11.5 × 10^?3 min). The analytical determinations show the presence of p-nitrophenol and aminophenol in the reaction medium during the photochemical experiments. The kinetic of degradation in all experiments obeyed a first-order reaction pattern.     

Photochemical degradation of methylparathion in the presence of humic acid

Photochemical degradation of methylparathion (O,O,-dimethyl O-4 nitrophenylphosphorothioate) in the presence of humic acid between pH 2 and 7 was monitored by differential pulse polarography. Humic acid was not electro-active under the experimental conditions used in this study. Only the pesticide and its main degradation product at pH 2 exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by humic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation in the presence of humic acid was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 2 x 10(-3) to 6.3 x 10(-3) min(-1).     

Removal of methyl parathion from water by electrochemically generated Fenton's reagent

The electro-Fenton process was used to assess the degradation of methyl parathion (MP) in aqueous solutions. This oxidation process allows the production of hydroxyls radicals which react on the organic compounds, leading to their mineralization. Degradation experiments were performed either in perchloric, sulphuric, hydrochloric and nitric acid media under current controlled electrolysis conditions at different pH. The pH effect as well as the nature of the medium (i.e., the nature of the ions present in medium) on the degradation and mineralization efficiency were studied. The mineralization of the initial pollutant was investigated by total organic carbon measurements which show a complete mineralization at pH 3 in perchloric medium. The absolute rate constant of MP hydroxylation reaction was determined as (4.20+/-0.11)x10(9)M(-1)s(-1). Complete degradation of MP and its metabolites occur in less than 45min. Degradation reaction intermediates such as aromatic compounds, carboxylic acids and inorganic ions were identified and a mineralization pathway is proposed.     

Photodegradation of bisphenol A in simulated lake water containing algae, humic acid and ferric ions

The photodegradation of bisphenol A (BPA), a suspected endocrine disruptor (ED), in simulated lake water containing algae, humic acid and Fe3+ ions was investigated. Algae, humic acid and Fe3+ ions enhanced the photodegradation of BPA. Photodegradation efficiency of BPA was 36% after 4h irradiation in the presence of 6.5 x 10(9) cells L(-1) raw Chlorella vulgaris, 4 mg L(-1) humic acid and 20 micromol L(-1) Fe3+. The photodegradation efficiency of BPA was higher in the presence of algae treated with ultrasonic than that without ultrasonic. The photodegradation efficiency of BPA in the water only containing algae treated with ultrasonic was 37% after 4h irradiation. The algae treated with heating can also enhance the photodegradation of BPA. This work helps environmental scientists to understand the photochemical behavior of BPA in lake water.     

Parathion degradation and its intermediate formation by Fenton process in neutral environment

The purpose of this study is to investigate parathion degradation by Fenton process in neutral environment. The initial parathion concentration for all the degradation experiments was 20 ppm. For hydrogen ion effect on Fenton degradation, the pH varied from 2 to 8 at the [H₂O₂] to [Fe²⁺] ratio of 2-2 mM, and the result showed pH 3 as the most effective environment for parathion degradation by Fenton process. Apparent degradation was also observed at pH 7. The subsequent analysis for parathion degradation was conducted at pH 7 because most environmental parathion exists in the neutral environment. Comparing the parathion degradation results at various Fenton dosages revealed that at Fe²⁺ concentrations of 0.5, 1.0 and 1.5 mM, the Fenton reagent ratio ([H₂O₂]/[Fe²⁺]) for best-removing performance were found as 4, 3, and 2, resulting in the removal efficiencies of 19%, 48% and 36%, respectively. Further increase in Fe²⁺ concentration did not cause any increase of the optimum Fenton reagent ratio for the best parathion removal. The result from LC-MS also indicated that hydroxyl radicals might attack the PS double bond, the single bonds connecting nitro-group, nitrophenol, or the single bond within ethyl groups of parathion molecules forming paraoxons, nitrophenols, nitrate/nitrite, thiophosphates, and other smaller molecules. Lastly, the parathion degradation by Fenton process at the presence of humic acids was investigated, and the results showed that the presence of 10 mg L⁻¹ of humic acids in the aqueous solution enhanced the parathion removal by Fenton process twice as much as that without the presence of humic acids.     

Effect of metal ions and humic acid on the dechlorination of tetrachloroethylene by zerovalent iron

The dechlorination of tetrachloroethylene (PCE) by zerovalent iron (Fe(0)) in the presence of metal ions and humic acid was investigated. In the absence of metal ion and humic acid, 64% of the initial PCE was dechlorinated after 125 h with the production of ethane and ethene as the major end products. The dechlorination followed pseudo-first-order kinetics and the normalized surface rate constant (k(SA)) for PCE dechlorination was (3.43+/-0.61)x10(-3)lm(-2)h(-1). Addition of metal ions enhanced the dechlorination efficiency and rate of PCE, and the enhancement effect followed the order Ni(II)>Cu(II)>Co(II). The k(SA) for PCE dechlorination in the presence of metal ions were 2-84 times higher than that in the absence of metal ions. X-ray photoelectron spectroscopy (XPS) showed that Cu(II) and Ni(II) were reduced by Fe(0) to zerovalent metals, and resulted in the formation of bimetallic system to accelerate the dechlorination reaction. On the contrary, humic acid out-competed the reactive sites on iron surface with PCE, and subsequently decreased the dechlorination efficiency and rate of PCE by Fe(0). However, the reactivity of Fe(0) for PCE dechlorination in the presence of metal ions and humic acid increased by a factor of 3-161 when compared to the iron system containing humic acid alone. Since humic acid and metal ions are the most often found co-existing compounds in the contaminated aquifers with chlorinated hydrocarbons, results obtained in this study is useful to better understand the feasibility of using Fe(0) for long-term application to the remediation of contaminated sites.     

Photochemical degradation of methylparathion in the presence of humic acid

Photochemical degradation of methylparathion (O,O,-dimethyl O-4 nitrophenylphosphorothioate) in the presence of humic acid between pH 2 and 7 was monitored by differential pulse polarography. Humic acid was not electro-active under the experimental conditions used in this study. Only the pesticide and its main degradation product at pH 2 exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by humic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation in the presence of humic acid was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 2 × 10^?3 to 6.3 × 10^?3 min^?1.     

Photochemical nitro-nitrite rearrangement in methyl parathion decay under tropical conditions

This work presents a study of the abiotic degradation of commercially available methyl parathion in aqueous solution at two different concentrations (88 mg/L and 200 μg/L). The effects of solar irradiation and the presence of humic acids were evaluated and revealed a synergistic response between them. The half-life of methyl parathion ranged from 4.9 to 37 days, and the experimental data also show that photochemical processes were the most relevant in this case. The only byproduct found in samples submitted to shadowed conditions was 4-nitrophenol. On the other hand, 4-nitrophenol, methyl paraoxon and a new degradation product (O,O-dimethyl O-p-hydroxyphenyl phosphorothioate) were detected when the samples were exposed directly to sunlight. This newly identified compound was prepared in the laboratory by thiophosphorylation of hydroquinone, and coelution experiments with authentic samples provided unambiguous confirmation of the presence of O,O-dimethyl O-p-hydroxy phenylphosphorothioate in samples.     

Catalytic properties of cyclodextrins on the hydrolysis of parathion and paraoxon in aquatic medium containing humic acids

The inclusion catalysis effects of -,β- and γ-cyclodextrins(CyDs) on the hydrolysis rate of parathion, methyl parathion and paraoxon were investigated at 25°C in alkaline buffer solution(pH=8.5) containing humic acids. The hydrolysis rate of these pesticides was increased by the presence of humic acids. The inclusion catalysis of β-CyD inhibited parathion hydrolysis but promoted paraoxon hydrolysis. The CyD inclusion catalysis showed characteristic correlation with relative magnitudes of the inclusion-depth parameters of the pesticides which could be determined by the rotational-strength analysis of the induced circular dichroism. The essential properties of the CyD inclusion catalysis were explained in terms of the geometries of the CyD-pesticide inclusion complexes which determine degree of the proximity between the pesticide reaction site and the CyD catalytic site.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 x 10(- 3) h(- 1) to 7.0 x 10(- 3) h(- 1). The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Observations of 2,4,6-trichlorophenol degradation by ozone

The aqueous reactivity of 2,4,6-trichlorophenol (TCP) with ozone has been studied at laboratory-scale using a simple gas bubble/liquid contacting system. Degradation rate constants were measured directly and found to be 7.6 and 77.2 M(-1)s(-1) at pH 2 and 7.5, respectively. At pH 7.5, 10 min of ozonation ( identical with 15 mM ozone consumption) achieved a 90% degradation of TCP, which corresponded to the release of approximately 2 mol Cl(-) per mol TCP. The presence of hydrogen peroxide in solution did not significantly increase the TCP degradation but increased the overall dechlorination to 2.7 mol Cl(-) per mol TCP. The presence of humic acid (HA) in solution was found to enhance the degradation rate of TCP at low relative HA concentrations (<0.6 g/g HA:TCP), but to reduce the rate at higher HA concentrations.     

Hydrogen peroxide-assisted UV photodegradation of Lindane

Aqueous solutions of gamma-hexachlorocyclohexane (Lindane) were photolyzed (lambda=254 nm) under a variety of solution conditions. The initial concentrations of hydrogen peroxide (H(2)O(2)) and Lindane varied from 0 to 20 mM and 0.21 to 0.22 microM, respectively, the pH ranged from 3 to 11, and several concentration ratios of Suwannee River humic acid and fulvic acid were dissolved in the irradiated solutions. Lindane rapidly reacted, and the maximum reaction rate constant (9.7 x 10(-3) s(-1)) was observed at pH 7 and initial [H(2)O(2)]=1 mM. Thus, 90% of the Lindane is destroyed in approximately 4 min under these conditions. In addition, within 15 min, all chlorine atoms were converted to chloride ion, indicating that chlorinated organic by-products do not accumulate. The reactor was characterized by measuring the photon flux (7.04 x 10(-6) E s(-1)) and the cumulative production of *OH during irradiation. The cumulative *OH production during irradiation was fastest at an initial [H(2)O(2)]=5 mM (k=0.77 micro M s(-1)).     

Influence of sorption to dissolved humic substances on transformation reactions of hydrophobic organic compounds in water. Part II: hydrolysis reactions

The effect of dissolved humic acid (HA) on two types of hydrolysis reactions was investigated: (I) dehydrochlorination of gamma-hexachlorocyclohexane (HCH) and 1,1,2,2-tetrachloroethane (TeCA) as a reaction involving hydroxide ions (OH(-)) and (II) hydrolysis of 1-octyl acetate (OA) which is catalyzed by H(+) at the applied pH value (pH 4.5). The rate of TeCA hydrolysis was not affected by addition of 2 g l(-1) of HA at pH 10 (k' = 0.33 h(-1)) but HCH hydrolysis was significantly inhibited (k' = 4.6 x 10(-3) h(-1) without HA and 2.8 x 10(-3)h(-1) at 2 g l(-1) HA). HCH is sorbed by 51% whereas TeCA sorption is insignificant at this HA concentration. Sorbed HCH molecules are effectively protected due to electrostatic repulsion of OH(-) by the net negative charge of the HA molecules. In contrast, OA hydrolysis at pH 4.5 (k' = 1.6 x 10(-5) h(-1)) was drastically accelerated after addition of 2 g l(-1) HA (k' = 1.1 x 10(-3) h(-1)). The ratio of the pseudo-first-order rate constants of the sorbed and the freely dissolved ester fraction is about 70. H(+) accumulation in the microenvironment of the negatively charged HA molecules was suggested to contribute to the higher reaction rate for the sorbed fraction in case of this H(+)-catalyzed reaction. Analogous effects from anionic surfactants are known as micellar catalysis.     

Selenite reduction in Boom clay: Effect of FeS(2), clay minerals and dissolved organic matter

Several experiments were set up to study Se speciation and solubility in the reducing Boom clay environment, starting from oxidized Se species which were added in oversaturation with respect to the thermodynamic solubility of reduced Se solid phases. Upon introduction of SeO3(2-) to FeS(2)-containing samples, adsorption of SeO3(2-) occurred at the FeS2 surface, and led to a reduction and precipitation of a Se0 solid phase with a solubility of 3x10(-9) M (after 60 days). In the presence of humic substances, an association of Se with these humic substances was observed and the 3x10(-9) M solubility limit was not reached in the same time delay. Upon introduction of SeO3(2-) to Boom clay suspensions (equilibration up to 9 months), the initial adsorption of SeO3(2-) on the solid phase was increased with respect to systems containing only FeS2, due to the presence of (illite) clay minerals. This competing adsorption process, and the presence of humic substances, again decreased the kinetics of reduction with respect to FeS2 samples. Also, an association of Se with Boom clay humic substances was observed, and amounted up to approximately 10(-7) M in some samples after 9 months equilibration.     

Effects of humic substances on the decomposition of 2,4-dichlorophenol by ozone after extraction from water into acetic acid through activated carbon

The objectives of this study are to clarify the behavior of humic substances throughout the processes of 2,4-dichlorophenol (2,4-DCP) adsorption on granular activated carbon (GAC) from water and extraction into acetic acid, and the influence of the extracted humic substances on the decomposition of 2,4-DCP by ozone in the acetic acid. The adsorption capacity of GAC for 2,4-DCP was not influenced by the humic substances preloaded to have equilibrium concentration of 24.9mg Cl(-1) (14.5mg Cg(-1)). The adsorption capacity of GAC for 2,4-DCP decreased to one tenth of new GAC after the first adsorption-extraction step because of only 16% desorption in the first step. However, 2,4-DCP adsorbed on GAC was completely extracted after the second step suggesting that GAC can be used as adsorbent to transfer 2,4-DCP from water to acetic acid. The concentration ratio of 2,4-DCP from water into acetic acid was around 2x10(5), whereas the concentration ratio of humic substances was about 3.5, indicating that 2,4-DCP was selectively adsorbed and extracted by this system. The first order degradation rate constant for 2,4-DCP by ozone in acetic acid increased with the addition of humic substances. The rate constant with 16mg Cl(-1) of humic substances was 2.6 times as high as that without humic substances. Humic substances behaved as a promoter for the degradation of 2,4-DCP by ozone.     

Electrochemical monitoring of methylparathion degradation in an acid aqueous medium in presence of Cu(II)

A study was undertaken to determine the effect of Cu(II) in degradation of methylparathion (o,o-dimethyl o,4-nitrophenyl phosphoriotioate) in acid medium. Initial electrochemical characterization of Cu(II) and methylparathion was done in an aqueous medium at a pH range of 2-7. Cu(II) was studied in the presence of different anions and it was observed that its electroactivity depends on pH and is independent of the anion used. Methylparathion had two reduction signals at pH < or = 6 and only one at pH > 6. The pesticide's transformation kinetic was then studied in the presence of Cu(II) in acid buffered aqueous medium at pH values of 2, 4, and 7. Paranitrophenol appeared as the only electroactive product at all three pH values. The reaction was first order and had k values of 5.2 x 10(-3) s(-1) at pH 2, 5.5 x 10(-3) s(-1) at pH 4 and 9.0 x 10(-3) s(-1) at pH 7. It is concluded that the principal degradation pathway of methylparathion in acid medium is a Cu(II) catalyzed hydrolysis reaction.     

Rapid reductive dechlorination of atrazine by zero-valent iron under acidic conditions

The dechlorination of atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) via reaction with metallic iron under low-oxygen conditions was studied using reaction mixture pH values of 2.0, 3.0, and 3.8. The pH control was achieved through addition of sulfuric acid throughout the duration of the reaction. The lower the pH of the reaction mixture, the faster the degradation of atrazine. The surface area of the sulfuric acid-treated iron particles was 0.31 (+/- 0.01) m2 g-1 and the surface area normalized initial pseudo-first order rate constants (kSA, where rate = kSA x (surface area/l) x [Atrazine]) at pH values of 2.0, 3.0, and 3.8 were equal to, respectively, 3.0 (+/- 0.4) x 10(-3) min-1 m-2 l, 5 (+/- 3) x 10(-4) min-1 m-2 l, and 1 (+/- 1) x 10(-4) min-1 m-2 l. The observed products of the degradation reaction were dechlorinated atrazine (2-ethylamino-4-isopropylamino-1,3,5-triazine) and possibly hydroxyatrazine (2-ethylamino-4-isopropylamino-6-hydroxy-s-triazine). Triazine ring protonation may account, at least in part, for the observed effect of pH on atrazine dechlorination via metallic iron.     

Enhanced chemical oxidation of aromatic hydrocarbons in soil systems

Fenton's destruction of benzene, toluene, ethylbenzene, and xylene (BTEX) was investigated in soil slurry batch reactors. The purpose of the investigation was to quantify the enhancement of oxidation rates and efficiency by varying process conditions such as iron catalyst (Fe(II) or Fe(III); 2, 5, and 10mM), hydrogen peroxide (H2O2; 30, 150, 300 mM), and metal chelating agents (l-ascorbic acid, gallic acid, or N-(2-hydroxyethyl)iminodiacetic acid). Rapid contaminant mass destruction (97% after 3h) occurred in the presence of 300 mM H2O2 and 10 mM Fe(III). An enhanced removal rate (>90% removal after 15 min and 95% removal after 3h) was also observed by combining Fe(III), N-(2-hydroxyethyl)iminodiacetic acid and 300 mM H2O2. The observed BTEX mass removal rate constants (3.6-7.8 x 10(-4)s(-1)) were compared to the estimated rate constants (4.1-10.1 x 10(-3)s(-1)). The influence of non-specific oxidants loss (by reaction with iron hydroxides and soil organic matter) was also explored.     

Mineralization of C.I. Reactive Yellow 84 in aqueous solution by sonolytic ozonation

The operational parameters and mechanism of mineralization of C.I. Reactive Yellow 84 (RY84), one of the azo dyes, in aqueous solution were investigated using sonolytic ozonation (US/O(3) oxidation). Of the pseudo-first-order degradation rate constants of TOC reduction, 9.0 x 10(-4), 7.3 x 10(-3) and 1.8 x 10(-2)min(-1) were observed with US, O3, and a combination of US and O3, respectively. These results illustrate that ozonation combined with sonolysis for removal of TOC is more efficient than ozonation alone or ultrasonic irradiation alone without considering the operating costs. With the initial pH value at 10.0, the ozone dose at 4.5 g h(-1), the energy density of ultrasound at 176 W l(-1), and the initial concentration of RY84 at 100 mg l(-1), the extent of mineralization measured as TOC loss was maximized. The variation of the concentrations of related ions (oxalate, formate, acetate, NO3(-), NO2(-), NH4(+), Cl(-), and SO4(2-)) during the reaction process was monitored. Other organic intermediates detected by GC/MS were N-methyleneaniline, phthalic acid, 4-hydroxyphthalic acid, isocyanatobenzene, aniline, 4-iminocyclohexa-2,5-dien-1-one, butene diacid and urea. Based on these findings, a tentative degradation pathway was proposed.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.