Photocatalytic reduction of organic pollutant under visible light by green route synthesized gold nanoparticles

We report a rapid method of green chemistry approach for synthesis of gold nanoparticles(AuNPs)using Lagerstroemia speciosa leaf extract(LSE). L. speciosa plant extract is known for its effective treatment of diabetes and kidney related problems. The green synthesis of Au NPs was complete within 30 min at 25°C. The same could also be achieved within 2 min at a higher reaction temperature(80°C). Both UV–visible spectroscopy and transmission electron microscopy results suggest that the morphology and size distribution of Au NPs are dependent on the pH of gold solution,gold concentration,volume of LSE,and reaction time and temperature. Comparison between Fourier transform infrared spectroscopy(FT-IR)spectra of LSE and the synthesized Au NPs indicate an active role of polyphenolic functional groups(from gallotannins,lagerstroemin,and corosolic acid)in the green synthesis and capping of Au NPs. The green route synthesized Au NPs show strong photocatalytic activity in the reduction of dyes viz.,methylene blue,methyl orange,bromophenol blue and bromocresol green,and 4-nitrophenol under visible light in the presence of Na BH_4. The non-toxic and cost effective LSE mediated Au NPs synthesis proposed in this study is extremely rapid compared to the other reported methods that require hours to days for complete synthesis of Au NPs using various plant extracts. Strong and stable photocatalytic behavior makes Au NPs attractive in environmental applications,particularly in the reduction of organic pollutants in wastewater.     

Intracellular biosynthesis of Au and Ag nanoparticles using ethanolic extract of Brassica oleracea L. and studies on their physicochemical and biological properties

In this present study, we reported broccoli (Brassica oleracea L.) as a potential candidate for the synthesis of gold and silver nanoparticles (NPs) in green chemistry method. The synthesized metal nanoparticles are evaluated their antimicrobial efficacy against different human pathogenic organisms. The physico-chemical properties of gold nanoparticles were analyzed using different analytical techniques such as a UV–Vis spectrophotometer, Field Emission Scanning Electron Microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and a Fourier Transform Infrared spectrophotometer. In addition, gold and silver NP antimicrobial efficacy was checked by disc diffusion assay. UV–Vis color intensity of the nanoparticles was shown at 540 and 450 nm for gold and silver nanoparticles respectively. Higher magnification of the Field Emission Scanning Electron Microscopy image shows the variable morphology of the gold nanoparticles such as spherical, rod and triangular shapes and silver nanoparticles were seen in spherical shapes. The average spherical size of the particles was observed in 24–38 nm for gold and 30–45 nm for silver NPs. X-ray diffraction pattern confirmed the presence of gold nanoparticles and silver nanoparticles which were crystalline in nature. Additionally, the functional metabolites were identified by the Fourier Transform Infrared spectroscopy. IR spectra revealed phenols, alcohols, aldehydes (sugar moieties), vitamins and proteins are present in the broccoli extract which are accountable to synthesize the nanoparticles. The synthesized gold and silver NPs inhibited the growth of the tested bacterial and fungal pathogens at the concentration of 50 μg/mL respectively. In addition, broccoli mediated gold and silver nanoparticles have shown potent antimicrobial activity against human pathogens.     

Biodegradation of indole by a newly isolated Cupriavidus sp. SHE

Indole, a typical nitrogen heterocyclic aromatic pollutant, is extensively spread in industrial wastewater. Microbial degradation has been proven to be a feasible approach to remove indole, whereas the microbial resources are fairly limited. A bacterial strain designated as SHE was isolated and found to be an efficient indole degrader. It was identified as Cupriavidus sp. according to 16S rRNA gene analysis. Strain SHE could utilize indole as the sole carbon source and almost completely degrade 100 mg/L of indole within 24 hr. It still harbored relatively high indole degradation capacity within pH 4–9 and temperature 25°C–35°C. Experiments also showed that some heavy metals such as Mn^2 +, Pb^2 + and Co^2 + did not pose severe inhibition on indole degradation. Based on high performance liquid chromatography–mass spectrum analysis, isatin was identified as a minor intermediate during the process of indole biodegradation. A major yellow product with m/z 265.0605 (C₁₅H₈N₂O₃) was generated and accumulated, suggesting a novel indole conversion pathway existed. Genome analysis of strain SHE indicated that there existed a rich set of oxidoreductases, which might be the key reason for the efficient degradation of indole. The robust degradation ability of strain SHE makes it a promising candidate for the treatment of indole containing wastewater.     

Differences in nitrite-oxidizing communities and kinetics in a brackish environment after enrichment at low and high nitrite concentrations

Nitrite accumulation in shrimp ponds can pose serious adverse effects to shrimp production and the environment.This study aims to develop an effective process for the enrichment of ready-to-use nitrite-oxidizing bacteria(NOB)inocula that would be appropriate for nitrite removal in brackish shrimp ponds.To achieve this objective,the effects of nitrite concentrations on NOB communities and nitrite oxidation kinetics in a brackish environment were investigated.Moving-bed biofilm sequencing batch reactors and continuous moving-bed biofilm reactors were used for the enrichment of NOB at various nitrite concentrations,using sediment from brackish shrimp ponds as seed inoculum.The results from NOB population analysis with quantitative polymerase chain reaction(q PCR)show that only Nitrospira were detected in the sediment from the shrimp ponds.After the enrichment,both Nitrospira and Nitrobacter coexisted in the reactors controlling effluent nitrite at 0.1 and 0.5 mg-NO_2~--N/L.On the other hand,in the reactors controlling effluent nitrite at 3,20,and 100 mg-NO_2~--N/L,Nitrobacter outcompeted Nitrospira in many orders of magnitude.The half saturation coefficients(Ks)for nitrite oxidation of the enrichments at low nitrite concentrations(0.1 and 0.5 mg-NO_2~--N/L)were in the range of 0.71–0.98 mg-NO_2~--N/L.In contrast,the Ksvalues of NOB enriched at high nitrite concentrations(3,20,and 100 mg-NO_2~--N/L)were much higher(8.36–12.20 mg-NO_2~--N/L).The results suggest that the selection of nitrite concentrations for the enrichment of NOB inocula can significantly influence NOB populations and kinetics,which could affect the effectiveness of their applications in brackish shrimp ponds.     

Uptake of radioiodide by Paenibacillus sp., Pseudomonas sp., Burkholderia sp. and Rhodococcus sp. isolated from a boreal nutrient-poor bog

Radionuclides, like radioiodine(~(129)I), may escape deep geological nuclear waste repositories and migrate to the surface ecosystems. In surface ecosystems, microorganisms can affect their movement. Iodide uptake of six bacterial strains belonging to the genera Paenibacillus,Pseudomonas, Burkholderia and Rhodococcus isolated from an acidic boreal nutrient-poor bog was tested. The tests were run in four different growth media at three temperatures. All bacterial strains removed iodide from the solution with the highest efficiency shown by one of the Paenibacillus strains with 99% of iodide removed from the solution in one of the used growth media. Pseudomonas, Rhodococcus and one of the two Paenibacillus strains showed highest iodide uptake in 1% yeast extract with maximum values for the distribution coefficient(K_d) ranging from 90 to 270 L/kg DW. The Burkholderia strain showed highest uptake in 1% Tryptone(maximum K_d170 L/kg DW). The Paenibacillus strain V0-1-LW showed exceptionally high uptake in 0.5% peptone + 0.25% yeast extract broth(maximum K_d 1,000,000 L/kg DW). Addition of 0.1% glucose to the 0.5% peptone + 0.25% yeast extract broth reduced iodide uptake at 4℃ and 20℃ and enhanced iodide uptake at 37℃ compared to the uptake without glucose. This indicates that the uptake of glucose and iodide may be competing processes in these bacteria. We estimated that in in situ conditions of the bog,the bacterial uptake of iodide accounts for approximately 0.1%–0.3% of the total sorption of iodide in the surface, subsurface peat, gyttja and clay layers.     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

Comparative cytotoxicity of nanoparticles and ions to Escherichia coli in binary mixtures

The objective of this study was to understand toxicity of mixture of nanoparticles (NPs) (ZnO and TiO₂) and their ions to Escherichia coli. Results indicated the decrease in percentage growth of E. coli with the increase in concentration of NPs both in single and mixture setups. Even a small concentration of 1 mg/L was observed to be significantly toxic to E. coli in binary mixture setup (exposure concentration: 1 mg/L ZnO and 1 mg/L TiO₂; 21.15% decrease in plate count concentration with respect to control). Exposure of E. coli to mixture of NPs at 1000 mg/L (i.e., 1000 mg/L ZnO and 1000 mg/L TiO₂) resulted in 99.63% decrease in plate count concentration with respect to control. Toxic effects of ions to E. coli were found to be lesser than their corresponding NPs. The percentage growth reduction was found to be 36% for binary mixture of zinc and titanium ions at the highest concentration (i.e., 803.0 mg/L Zn and 593.3 mg/L Ti where ion concentrations are equal to the Zn ions present in 1000 mg/L ZnO NP solution and Ti^+ 4 ions present in 1000 mg/L TiO₂ NP solution). Nature of mixture toxicity of the two NPs to E. coli was found to be antagonistic. The alkaline phosphatase (Alp) assay indicated that the maximum damage was observed when E. coli was exposed to 1000 mg/L of mixture of NPs. This study tries to fill the knowledge gap on information of toxicity of mixture of NPs to bacteria which has not been reported earlier.     

Synthesis, characterization and application of ZnO-Ag as a nanophotocatalyst for organic compounds degradation, mechanism and economic study

The current work deals with ZnO-Ag nanocomposites (in the wide range of x in the Zn_1 − xO-Ag_x chemical composition) synthesized using microwave assisted solution combustion method. The structural, morphological and optical properties of the samples were characterized by XRD (X-ray diffraction), FTIR (Fourier transform infrared spectrometry), SEM (scanning electron microscopy technique), EDX (energy dispersive X-ray spectrum), ICP (inductively coupled plasma technique), TEM (transmission electron microscopy), BET (Brunauer–Emmett–Teller method), UV–Vis (ultraviolet–visible spectrophotometer) and photoluminescence spectrophotometer. The photocatalytic activity of the ZnO-Ag was investigated by photo-degradation of Acid Blue 113 (AB 113) under UV illumination in a semi-batch reactor. This experiment showed that ZnO-Ag has much more excellent photocatalytic properties than ZnO synthesized by the same method. The enhanced photocatalytic activity was due to the decrease in recombination of photogenerated electron-holes. The results showed the improvement of ZnO photocatalytic activity and there is an optimum amount of Ag (3.5 mol%) that needs to be doped with ZnO. The effect of operating parameters such as pH, catalyst dose and dye concentration were investigated. The reaction byproducts were identified by LC/MS (liquid chromatography/mass spectrometry) analysis and a pathway was proposed as well. Kinetic studies indicated that the decolorization process follows the first order kinetics. Also, the degradation percentage of AB 113 was determined using a total organic carbon (TOC) analyzer. Additionally, cost analysis of the process, the mechanism and the role of Ag were discussed.     

零价铁对脱色希瓦氏菌S12偶氮还原的促进作用

以脱色希瓦氏菌(Shewanella decolorationis)S12为实验菌株,研究了零价铁(ZVI)存在条件下微生物的厌氧偶氮还原特性及其最佳反应条件.结果表明,ZVI可显著促进菌株S12的厌氧偶氮还原速率.培养30 h后含有20 mmol.L-1微米级ZVI和S12菌的培养体系中,菌株S12对1 mmol.L-1苋菜红的脱色率达100%,比不含ZVI的S12菌培养体系和只含ZVI的体系的偶氮还原率分别提高了23.16%和94.66%;在额外含20 mmol.L-1甲酸钠的培养体系中,ZVI的存在也使S12菌对苋菜红的脱色率提高了20.54%.此外,ZVI的存在可显著提高培养体系对偶氮染料的耐受能力.在投加ZVI和菌株S12培养体系中,连续批量投加浓度为1 mmol.L-1的苋菜红可在276 h内实现11次有效脱色,而不含ZVI的S12菌培养体系中只能实现3次有效脱色.进一步的研究发现,ZVI与菌株S12协同培养体系的最适反应pH为9.0,最适ZVI投加量为60 mmol.L-1.与毫米级和纳米级ZVI颗粒相比,微米级ZVI颗粒具有更强的促进作用.本研究结果将为利用ZVI协同促进偶氮染料的生物治理效果提供科学参数.     

Hydrothermal fabrication of selectively doped organic assisted advanced ZnO nanomaterial for solar driven photocatalysis

Hydrothermal fabrication of selectively doped (Ag⁺ + Pd^3 +) advanced ZnO nanomaterial has been carried out under mild pressure temperature conditions (autogeneous; 150°C). Gluconic acid has been used as a surface modifier to effectively control the particle size and morphology of these ZnO nanoparticles. The experimental parameters were tuned to achieve optimum conditions for the synthesis of selectively doped ZnO nanomaterials with an experimental duration of 4 hr. These selectively doped ZnO nanoparticles were characterized using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV–Vis spectroscopy and scanning electron microscopy (SEM). The solar driven photocatalytic studies have been carried out for organic dyes, i.e., Procion MX-5B dye, Cibacron Brilliant Yellow dye, Indigo Carmine dye, separately and all three mixed, by using gluconic acid modified selectively doped advanced ZnO nanomaterial. The influence of catalyst, its concentration and initial dye concentration resulted in the photocatalytic efficiency of 89% under daylight.     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag (BOF-slag) was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial pH, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant (k_obs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial pH, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage. A linear dependence of k_obs on total removed phosphorus (TRP) was established with k_obs = (3.51 ± 0.11) × 10^− 4 × TRP. Finally, it was suggested that the Langmuir–Rideal (L–R) or Langmuir–Hinshelwood (L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag(BOF-slag)was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial p H, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant(kobs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial p H, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage.A linear dependence of kobson total removed phosphorus(TRP) was established with kobs=(3.51 ± 0.11) × 10- 4× TRP. Finally, it was suggested that the Langmuir–Rideal(L–R)or Langmuir–Hinshelwood(L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

Carbonyl compounds in dining areas, kitchens and exhaust streams in restaurants with varying cooking methods in Kaohsiung, Taiwan

Eighteen carbonyl species in C₁–C₁₀ were measured in the dining areas, kitchens and exhaust streams of six different restaurant types in Kaohsiung, southern Taiwan. Measured results in the dining areas show that Japanese barbecue (45.06 ppb) had the highest total carbonyl concentrations (sum of 18 compounds), followed by Chinese hotpot (38.21 ppb), Chinese stir-frying (8.99 ppb), Western fast-food (8.22 ppb), Chinese–Western mixed style (7.38 ppb), and Chinese buffet (3.08 ppb), due to their different arrangements for dining and cooking spaces and different cooking methods. On average, low carbon-containing species (C₁–C₄), e.g., formaldehyde, acetaldehyde, acetone and butyraldehyde were dominant and contributed 55.01%–94.52% of total carbonyls in the dining areas of all restaurants. Meanwhile, Chinese–Western mixed restaurants (45.48 ppb) had high total carbonyl concentrations in kitchens mainly because of its small kitchen and poor ventilation. However, high carbon-containing species (C₅–C₁₀) such as hexaldehyde, heptaldehyde and nonanaldehyde (16.62%–77.00% of total carbonyls) contributed comparatively with low carbon-containing compounds (23.01%–83.39% of total carbonyls) in kitchens. Furthermore, Chinese stir-frying (132.10 ppb), Japanese barbecue (125.62 ppb), Western fast-food (122.67 ppb), and Chinese buffet (119.96 ppb) were the four restaurant types with the highest total carbonyl concentrations in exhaust streams, indicating that stir-frying and grilling are inclined to produce polluted gases. Health risk assessments indicate that Chinese hotpot and Japanese barbecue exceeded the limits of cancer risk (10^− 6) and hazard index (= 1), mainly due to high concentrations of formaldehyde. The other four restaurants were below both limits.     

Integrating geochemical (surface waters, stream sediments) and biological (diatoms) approaches to assess AMD environmental impact in a pyritic mining area: Aljustrel (Alentejo, Portugal)

Aljustrel mines were classified as having high environmental hazard due to their large tailings volume and high metal concentrations in waters and sediments.To assess acid mine drainage impacted systems whose environmental conditions change quickly,the use of biological indicators with short generation time such as diatoms is advantageous.This study combined geochemical and diatom data,whose results were highlighted in 3 groups:Group 1,with low p H(1.9–5.1)and high metal/metalloid(Al,As,Cd,Co,Cu,Fe,Mn,Ni,Pb,Zn;0.65–1032 mg/L)and SO_4(405–39124 mg/L)concentrations.An acidophilic species,Pinnularia aljustrelica,was perfectly adapted to the adverse conditions;in contrast,teratological forms of Eunotia exigua were found,showing that metal toxicity affected this species.The low availability of metals/metalloids in sediments of this group indicates that metals/metalloids of the exchangeable fractions had been solubilized,which in fact enables metal/metalloid diatom uptake and consequently the occurrence of teratologies;Group 2,with sites of near neutral p H(5.0–6.8)and intermediate metal/metalloid(0.002–6 mg/L)and SO_4(302–2179 mg/L)concentrations;this enabled the existence of typical species of uncontaminated streams(Brachysira neglectissima,Achnanthidium minutissimum);Group 3,with samples from unimpacted sites,showing low metal/metalloid(0–0.8 mg/L)and SO_4(10–315 mg/L)concentrations,high pH(7.0–8.4)and Cl contents(10–2119 mg/L)and the presence of brackish to marine species(Entomoneis paludosa).For similar conditions of acidity,differences in diversity,abundance and teratologies of diatoms can be explained by the levels of metals/metalloids.     

Bio-remediation of acephate–Pb(II) compound contaminants by Bacillus subtilis FZUL-33

Removal of Pb~(2+)and biodegradation of organophosphorus have been both widely investigated respectively. However, bio-remediation of both Pb~(2+)and organophosphorus still remains largely unexplored. Bacillus subtilis FZUL-33, which was isolated from the sediment of a lake, possesses the capability for both biomineralization of Pb~(2+)and biodegradation of acephate. In the present study, both Pb~(2+)and acephate were simultaneously removed via biodegradation and biomineralization in aqueous solutions.Batch experiments were conducted to study the influence of p H, interaction time and Pb~(2+)concentration on the process of removal of Pb2+. At the temperature of 25°C, the maximum removal of Pb~(2+)by B. subtilis FZUL-33 was 381.31 ± 11.46 mg/g under the conditions of p H 5.5, initial Pb~(2+)concentration of 1300 mg/L, and contact time of 10 min. Batch experiments were conducted to study the influence of acephate on removal of Pb~(2+)and the influence of Pb2+on biodegradation of acephate by B. subtilis FZUL-33. In the mixed system of acephate–Pb2+, the results show that biodegradation of acephate by B. subtilis FZUL-33 released PO43+, which promotes mineralization of Pb2+. The process of biodegradation of acephate was affected slightly when the concentration of Pb2+was below 100 mg/L. Based on the results, it can be inferred that the B. subtilis FZUL-33 plays a significant role in bio-remediation of organophosphorus-heavy metal compound contamination.     

Optimization of CO2 adsorption capacity and cyclical adsorption/desorption on tetraethylenepentamine-supported surface-modified hydrotalcite

The objective of this research was to investigate CO_2adsorption capacity of tetraethylenepentamine-functionalized basic-modified calcined hydrotalcite(TEPA/b-c HT)sorbents at atmospheric pressure formed under varying TEPA loading levels,temperatures,sorbent weight to total gaseous flow rate(W/F)ratios and CO_2concentrations in the influent gas.The TEPA/b-c HT sorbents were characterized by means of X-ray diffraction(XRD),Fourier transform infrared spectrometry(FT–IR),thermal gravimetric analysis(TGA),Brunauer–Emmet–Teller(BET)analysis of nitrogen(N_2)adsorption/desorption and carbon–hydrogen–nitrogen(CHN)elemental analysis.Moreover,a full 2~4factorial design with three central points at a 95%confidence interval was used to screen important factor(s)on the CO_2adsorption capacity.It revealed that85.0%variation in the capacity came from the influence of four main factors and the15.0%one was from their interactions.A face-centered central composite design response surface method(FCCCD–RSM)was then employed to optimize the condition,the maximal capacity of 5.5–6.1 mmol/g was achieved when operating with a TEPA loading level of 39%–49%(W/W),temperature of 76–90°C,W/F ratio of 1.7–2.60(g·sec)/cm~3and CO_2concentration of 27%–41%(V/V).The model fitted sufficiently the experimental data with an error range of±1.5%.From cyclical adsorption/desorption and selectivity at the optimal condition,the 40%TEPA/b-c HT still expressed its effective performance after eight cycles.     

Performance of low temperature Microbial Fuel Cells (MFCs) catalyzed by mixed bacterial consortia

Microbial Fuel Cells(MFCs) are a promising technology for treating wastewater in a sustainable manner. In potential applications, low temperatures substantially reduce MFC performance. To better understand the effect of temperature and particularly how bioanodes respond to changes in temperature, we investigated the current generation of mixed-culture and pure-culture MFCs at two low temperatures, 10°C and 5°C. The results implied that the mixed-culture MFC sustainably performed better than the pure-culture(Shewanella) MFC at 10°C, but the electrogenic activity of anodic bacteria was substantially reduced at the lower temperature of 5°C. At 10°C, the maximum output voltage generated with the mixed-culture was 540–560 m V, which was 10%–15% higher than that of Shewanella MFCs. The maximum power density reached 465.3 ± 5.8 m W/m~2 for the mixed-culture at10°C, while only 68.7 ± 3.7 m W/m~2 was achieved with the pure-culture. It was shown that the anodic biofilm of the mixed-culture MFC had a lower overpotential and resistance than the pure-culture MFC. Phylogenetic analysis disclosed the prevalence of Geobacter and Pseudomonas rather than Shewanella in the mixed-culture anodic biofilm, which mitigated the increase of resistance or overpotential at low temperatures.     

Decolorization of Methyl Orange by a new clay-supported nanoscale zero-valent iron: Synergetic effect, efficiency optimization and mechanism

In this study, a novel nanoscale zero-valent iron (nZVI) composite material was successfully synthesized using a low-cost natural clay, “Hangjin 2^# clay” (HJ clay) as the support and tested for the decolorization of the azo dye Methyl Orange (MO) in aqueous solution by nZVI particles. According to the characterization and MO decolorization experiments, the sample with 5:1 HJ clay-supported nZVI (HJ/nZVI) mass ratio (HJ-nZVI5) showed the best dispersion and reactivity and the highest MO decolorization efficiency. With the same equivalent Fe⁰ dosage, the HJ-nZVI1 and HJ-nZVI5 samples demonstrated a synergetic effect for the decolorization of MO: their decolorization efficiencies were much higher than that achieved by physical mixing of HJ clay and nZVIs, or the sum of HJ clay and nZVIs alone. The synergetic effect was primarily due to the improved dispersion and more effective utilization of the nZVI particles on/in the composite materials. Higher decolorization efficiency of MO was obtained at larger HJ-nZVI dosage, higher temperature and under N₂ atmosphere, while the MO initial concentration and pH were negatively correlated to the efficiency. HJ clay not only works as a carrier for nZVI nanoparticles, but also contributes to the decolorization through an “adsorption-enhanced reduction” mechanism. The high efficiency of HJ-nZVI for decontamination gives it great potential for use in a variety of remediation applications.     

Elevated atmospheric CO2 and drought effects on leaf gas exchange properties of barley

Atmospheric CO₂ concentration (C_a) is rising, predicted to cause global warming, and alter precipitation patterns. During 1994, spring barley (Hordeum vulgare L. cv. Alexis) was grown in a strip-split-plot experimental design to determine the effects that the main plot C_a treatments [A: Ambient at 370 μmol (CO₂) mol⁻¹; E: Enriched with free-air CO₂ enrichment (FACE) at ∼550 μmol (CO₂) mol⁻¹] had on several gas exchange properties of fully expanded sunlit primary leaves. The interacting strip-split-plot irrigation treatments were Dry or Wet [50% (D) or 100% (W) replacement of potential evapotranspiration] at ample nitrogen (261 kg N ha⁻¹) and phosphorous (29 kg P ha⁻¹) fertility. Elevated C_a facilitated drought avoidance by reducing stomatal conductance (g_s) by 34% that conserved water and enabled stomata to remain open for a longer period into a drought. This resulted in a 28% reduction in drought-induced midafternoon depression in net assimilation rate (A). Elevated C_a increased A by 37% under Dry and 23% under Wet. Any reduction in A under Wet conditions occurred because of nonstomatal limitations, whereas under Dry it occurred because of stomatal limitations. Elevated C_a increased the diurnal integral of A (A′) that resulted in an increase in the seasonal-long integral of A′ (A″) for barley leaves by 12% (P = 0.14) under both Dry and Wet - 650, 730, 905 and 1020 ± 65 g (C) m⁻² y⁻¹ for AD, ED, AW and EW treatments, respectively. Elevated C_a increased season-long average dry weight (DW_S; crown, shoots) by 14% (P = 0.02), whereas deficit irrigation reduced DW_S by 7% (P = 0.06), although these values may have been affected by a short but severe pea aphid [Acyrthosiphon pisum (Harris)] infestation. Hence, an elevated-C_a-based improvement in gas exchange properties enhanced growth of a barley crop.     

Synthesis,crystal structure,photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV–Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c = 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^− 1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2 − and NO₃⁻, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography–mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.