Influence of marble wastes on soil improvement and concrete production

Waste marble dusts are obtained by different methods of cutting marble in marble manufacturing companies. However, environmental damage can occur from the uncontrolled spill of these waste materials in natural habitats. In this study, we investigated the utilization of waste marble in the soil improvement of clayey soils, and as a fine aggregate in concrete production. Specifically, we determined the physical, mechanical and physicochemical characteristics of clayey soils with marble dust (MD) additive. The test results showed that some improvement occurred in the behavior of clay soil. Also, the cutting waste of marble sludge can be used as a filler material instead of fine aggregate in concrete production. This will reduce the porosity of the concrete due to the filling of the pores by MD.     

Anaerobic digestion potential of urban organic waste: a case study in Malm?.

A study of existing organic waste types in Malm?, Sweden was performed. The purpose was to gather information about organic waste types in the city to be able to estimate the potential for anaerobic treatment in existing digesters at the wastewater treatment plan (WWTP). The urban organic waste types that could have a significant potential for anaerobic digestion amount to about 50 000 tonnes year(-1) (sludge excluded). Some of the waste types were further evaluated by methane potential tests and continuous pilot-scale digestion. Single-substrate digestion and co-digestion of pre-treated, source-sorted organic fraction of municipal solid waste, wastewater sludge, sludge from grease traps and fruit and vegetable waste were carried out. The experiments showed that codigestion of grease sludge and WWTP sludge was a better way of making use of the methane potential in the grease trap sludge than single-substrate digestion. Another way of increasing the methane production in sludge digesters is to add source-sorted organic fraction of municipal solid waste (SSOFMSW). Adding SSOFMSW (20% of the total volatile solids) gave a 10-15% higher yield than could be expected by comparison with separate digestion of sludge respective SSOFMSW. Co-digestion of sludge and organic waste is beneficial not just for increasing gas production but also for stabilizing the digestion process. This was seen when co-digesting fruit and vegetable waste and sludge. When co-digested with sludge, this waste gave a better result than the separate digestion of fruit and vegetable waste. Considering single-substrate digestion, SSOFMSW is the only waste in the study which makes up a sufficient quantity to be suitable as the base substrate in a full-scale digester that is separated from the sludge digestion. The two types of SSOFMSW tested in the pilot-scale digestion were operated successfully at mesophilic temperature. By adding SSOFMSW, grease trap sludge and fruit and vegetables waste to sludge digesters at the wastewater treatment plant, the yearly energy production from methane could be expected to increase from 24 to 43 GWh.     

Performance characteristics of a low sludge bioreactor for wastewater treatment

An immobilized microbial cell system was developed and tested for the treatment of industrial wastewater. A consortium of selected aerobic microorganisms was immobilized onto several different support matrices in a packed bed reactor configuration and operated in a continuous process mode. Comparison of the support matrices showed only small differences in treatment efficiency, but significant differences in sludge production and process stability. Porous polymer supports were highly resistant to feedstream upsets and produced 80% lower sludge solids as compared with non-porous supports. These results were seen at both the benchtop and pilot plant scale for treatment of complex industrial waste streams. This technology was applied, in preliminary experiments, to the treatment of a model waste stream simulating wastewater from a Controlled Ecological Life-Support System (CELSS).     

分步沉淀法处理酸性矿山废水

采用分步沉淀工艺处理酸性矿山废水,考察了工艺条件对废水中有价金属元素回收效果的影响。实验结果表明:Ca(OH)_2为适宜的废水pH调节剂;调节废水pH至4.00左右并投加0.05 mL/L的H_2O_2,可首先去除Fe~(2+)及Fe~(3+),得到富Fe渣(w(Fe)=51.00%);调节废水pH至6.00~6.50,先投加50 mg/L的Na_2S,去除废水中的Cu~(2+),获得富Cu渣(w(Cu)=10.89%),再将Na_2S的投加量增至100 mg/L,去除废水中的Zn与Mn,获得富Zn-Mn渣(w(Cu)=2.37%,w(Mn)=6.79%,w(Pb)=1.61%);进一步调节废水pH至8.40,可去除剩余的Zn、Mn及其他重金属。分步沉淀工艺处理后的废水可达标排放,产生的富Fe渣、富Cu渣及富Zn-Mn渣可直接出售或具有利用价值。分步沉淀工艺可实现有价金属元素的高效回收,大幅度降低废水处理的实际成本,值得工程应用与推广。     

Recovery of coagulant from water supply plant sludge and its effect on clarification

Spent coagulant in water supply plant sludge was extracted with H₂SO₄ and the efficiency of the reused coagulant was studied. The optimum pH values for coagulant extraction and clarification with the reused coagulant were 3.0–4.0 and about 6, respectively. In treating raw influent obtained from a sewage treatment plant and wastewater from a coastal landfill site, the removal of chemical oxygen demand (COD), total nitrogen, and total phosphorous with the recovered coagulant was higher than that with commercial aluminum sulfate or polyaluminum chloride. In addition, the sludge settling properties, the extra sludge mass formation, the supernatant quality, and the cost of reagents were also studied. The coagulant recovered from water supply plant sludge by H₂SO₄ extraction could be successfully reused for the clarification of domestic and food industry wastewaters.     

无机陶瓷膜MBR处理己内酰胺生产废水

采用无机陶瓷膜分离装置对己内酰胺生产废水处理工艺中的初沉池出水进行泥水分离.实验结果表明:无机陶瓷膜分离装置能有效去除废水中的悬浮物和COD,悬浮物去除率达90％以上,出水悬浮物质量浓度在1 mg/L以下;COD去除率为70％以上,出水COD在100 mg/L以下;采用质量分数为5％的NaOH溶液能对无机陶瓷膜分离装置...     

Assessment and analysis of industrial liquid waste and sludge disposal at unlined landfill sites in arid climate

Municipal solid waste disposal sites in arid countries such as Kuwait receive various types of waste materials like sewage sludge, chemical waste and other debris. Large amounts of leachate are expected to be generated due to the improper disposal of industrial wastewater, sewage sludge and chemical wastes with municipal solid waste at landfill sites even though the rainwater is scarce. Almost 95% of all solid waste generated in Kuwait during the last 10 years was dumped in five unlined landfills. The sites accepting liquid waste consist of old sand quarries that do not follow any specific engineering guidelines. With the current practice, contamination of the ground water table is possible due to the close location of the water table beneath the bottom of the waste disposal sites. This study determined the percentage of industrial liquid waste and sludge of the total waste dumped at the landfill sites, analyzed the chemical characteristics of liquid waste stream and contaminated water at disposal sites, and finally evaluated the possible risk posed by the continuous dumping of such wastes at the unlined landfills. Statistical analysis has been performed on the disposal and characterization of industrial wastewater and sludge at five active landfill sites. The chemical analysis shows that all the industrial wastes and sludge have high concentrations of COD, suspended solids, and heavy metals. Results show that from 1993 to 2000, 5.14+/-1.13 million t of total wastes were disposed per year in all active landfill sites in Kuwait. The share of industrial liquid and sludge waste was 1.85+/-0.19 million t representing 37.22+/-6.85% of total waste disposed in all landfill sites. Such wastes contribute to landfill leachate which pollutes groundwater and may enter the food chain causing adverse health effects. Lined evaporation ponds are suggested as an economical and safe solution for industrial wastewater and sludge disposal in the arid climate of Kuwait.     

Recovery of biomass cellulose from waste sewage sludge

In our previous work, the primary sludge from wastewater treatment plants was shown to contain a considerable amount of cellulose (about 20%, based on suspended solids) owing to the discharge of toilet paper. For the purpose of using the cellulose as a biomass resource, this study examined a simple method for its recovery. When fibrous cellulose was suspended in 0.3% sulfuric acid and autoclaved at 130°C for 60 min, 85%–88% of the initial solids remained without dissolving. Under these conditions, an activated sludge sample not containing cellulose was strongly hydrolyzed and only 7% of the initial solids remained. The prescribed amounts of cellulose added to the activated sludge sample were quantitatively recovered by the autoclaving treatment. In the treatment of primary sludge containing >20% cellulose, residual solids with relatively high levels of cellulose (>69%) could be obtained. The results indicate that the method proposed here could recover cellulose practically from waste sewage sludge for biomass utilization. Received: July 17, 2000 / Accepted: July 4, 2001     

分子筛生产废水中悬浮物的絮凝与回用

对分子筛生产废水进行了絮凝沉降分离试验，确定了絮凝剂、助凝剂及絮凝敢分离条件。试验结果表明，絮凝沉降所得到的絮凝物料的化学组成、结构、性能与絮凝前原废水中的悬浮物基本一致，可返回原生产工序中使用。     

Towards a cleaner production in developing countries: a case study in a Chilean tannery.

A Chilean leather tanning industry (tannery) was studied in terms of input/output (I/O) analysis of beamhouse, tanyard and retanning processes. The physical-chemical characterization of 19 streams were investigated. Streams from the beamhouse process and some streams from the retanning process were found to have high organic contents ranging from 2.5 to 18.1 g COD L(-1). The pH ranged between 3.45 and 12.28. Sulphur was found in most of the streams whereas chromium was detected in two wastewaters from the tanyard and in seven streams from the retanning process. Pollution prevention opportunities were evaluated and an appropriate treatment strategy was proposed. The main emphasis was on determining waste reduction measures that can be easily implemented and are not particularly expensive. Measures for reduction at source were proposed to reduce water and chemicals consumption and wastewater pollution. A so-called S(index) strategy was used to evaluate proposals on segregation and specific treatment of the main chromium- and sulphur-containing wastewaters. It was suggested that some streams may be re-used, but it is necessary to apply anaerobic or aerobic treatment first, depending on their organic load. Solid wastes were also evaluated and a proposal for their reduction and disposal was made.     

Foamed lightweight materials made from mixed scrap metal waste powder and sewage sludge ash.

The porous properties and pozzolanic effects of sewage sludge ash (SSA) make it possible to produce lightweight materials. This study explored the effects of different metallic foaming agents, made from waste aluminium products, on the foaming behaviours and engineering characteristics, as well as the microstructure of sewage sludge ash foamed lightweight materials. The results indicated that aluminium powder and mixed scrap metal waste powder possessed similar chemical compositions. After proper pre-treatment, waste aluminium products proved to be ideal substitutes for metallic foaming agents. Increasing the amount of mixed scrap metal waste by 10-15% compared with aluminium powder would produce a similar foaming ratio and compressive strength. The reaction of the metallic foaming agents mainly produced pores larger than 10 microm, different from the hydration reaction of cement that produced pores smaller than 1 microm mostly. To meet the requirements of the lightweight materials characteristics and the compressive strength, the amount of SSA could be up to 60-80% of the total solids. An adequate amount of aluminium powder is 0.5-0.9% of the total solids. Increasing the fineness of the mixed scrap metal waste powder could effectively reduce the amount required and improve the foaming ratio.     

大型磷铵工程磷石膏制硫酸联产水泥装置的三废治理及利用

介绍了大型磷铵工程磷石膏制硫酸联产水泥装置排出的废水，废气和废渣的利用及治理情况，并对生产过程的磷、硫和氟的转化及损失量进行了衡算。     

Sequential (anaerobic/aerobic) biological treatment of Dalaman SEKA Pulp and Paper Industry effluent

In the pulp and paper industry, lignin and other color compounds are removed by chemical agents in bleaching process. Use of chlorine-based agents results in production of degradation products which include various chloro-organic derivatives. Since these new compounds are highly chlorinated, they cause a problem in the treatment of pulp and paper industry wastewaters. Chemical precipitation, lagooning, activated sludge, and anaerobic treatment are the processes used for treating pulp and paper effluents. Furthermore, a combination of these processes is also applicable. In this study, the effluent of Dalaman SEKA Pulp and Paper Industry was examined for its toxic effects on anaerobic microorganisms by anaerobic toxicity assay. Additionally, this wastewater was applied to a sequential biotreatment process consisting of an upflow anaerobic sludge blanket as the anaerobic stage and a once-through completely mixed stirred tank as the aerobic stage. Results indicated that: (1) Dalaman SEKA Pulp and Paper Industry wastewater exerted no inhibitory effects on the anaerobic cultures under the studied conditions, and (2) application of a sequential biological (anaerobic/aerobic) system to treat the Dalaman SEKA Pulp and Paper Industry wastewater resulted in approximately 91% COD and 58% AOX removals at a HRT of 5 and 6.54 h for anaerobic and aerobic, respectively.     

纯碱生产废水的综合治理

介绍了纯碱生产过程中产生的蒸氨废清液和生产下水的综合治理情况。将废清液晒盐回收ＮａＣｌ,然后从母液中回收ＣａＣｌ２。在雨季等情况下对废清液的治理措施是,将其两次兑海水,使其各项指标达到国家排放标准。     

电石渣－铁屑法去除硫酸废水中的氟和砷

对各种处理含氟、砷废水的方法进行了探讨，选择了以电石渣和废铁屑为药剂去除硫酸废水中氟和砷的方法，取得了较好的效果。该法以废治废、工艺简便、运行费用低，处理后的废水可达排放标准。     

Solid recovery rate of food waste recycling in South Korea

Source-separated collection system of household food waste has been implemented national wide in South Korea. Food waste recycling rate that means conversion rate to recycle is over 90 % in present. However, over the value of 90 %, we need to enhance the efficiency of food waste recycling process. We analyzed material flow of 24 food waste recycling facilities and calculated solid recovery rate to key-process. We found that 3–13 % of the solids from food waste outflows with foreign materials and 27–33 % of the solids outflow with wastewater. As a result, solid recovery rates are 65.3, 60.9, and 56.3 % in wet feed facility, dry feed facility, and composting facility, respectively. Alternative ways to recovery solid from wastewater or collection tools to exclude plastic bags, salt, and moisture content are required to make food waste recycling more efficient.     

Influence of combustion temperature on the performance of sewage sludge ash as a supplementary cementitious material

The potential for using sewage sludge ash (SSA) as a supplementary cementitious material (SCM) has been investigated. Controlled combustion of sewage sludge collected in Croatia from two wastewater treatment plants produced SSA with different characteristics. These were used to substitute for cement in mortar samples. The chemical composition and physical properties of SSA depend on wastewater composition, the sludge treatment process and the combustion temperature. These factors influence the suitability of SSA to be used as a SCM. For three different combustion temperatures (800, 900 and 1000 °C), it was concluded that properties of fresh mortar were not affected while in the hardened state, the most favorable combustion temperature is 900 °C regarding mechanical properties. Regardless of combustion temperature, for all types of SSA used in mortars as cement replacement (up to 30%), the average decrease in both compressive and flexural strength values was less than 8% for every 10% of added SSA. The results presented indicate that using up to 20% replacement of cement by SSA produces mortars that meet the specific technical requirements analyzed in this work.     

Mercury flows in a zinc smelting facility in South Korea

To prepare for the international mercury convention, the characteristics of mercury emissions from a zinc smelting facility in South Korea have been reviewed and a material flow analysis (MFA) has been conducted in this research. As inputs into the mercury MFA study, zinc ores and sulfuric acid were examined, whereas wastewater sludge, effluence water, spent catalyst, and emissions from the casting and roasting processes were examined as outputs. Mercury concentrations extracted from end products like zinc ingots, cadmium ingots, and sulfuric acid were then analyzed. Our results showed that the wastewater sludge discharged from the zinc smelting process had a relatively higher concentration of mercury, indicating that the concentration of mercury was further enriched in the wastewater sludge. The wastes discharged through the zinc smelting process should be thoroughly controlled, as results of the MFA showed that approximately 89 % of the mercury contained in the original input was later found in the waste. According to this study, the higher the concentration of mercury within zinc ores at the input stage, the higher is the mercury concentration found in the wastewater sludge at the output stage.     

Case study: Using soil washing/leaching for the removal of heavy metal at the twin cities army ammunition plant

COGNIS TERRAMET® soil leaching and Bescorp soil washing systems have been successfully combined to remediate an ammunition test burn area at the Twin Cities Army Ammunition Plant (TCAAP), New Brighton, Minnesota. This cleanup is the first in the country to successfully combine these two technologies, and it offers a permanent solution to heavy metal remediation. Over 20,000 tons of soil were treated in the project. The cleaned soil remained on-site, and the heavy metal contaminants were removed, recovered, and recycled. Eight heavy metals were removed from the contaminated soil achieving the very stringent cleanup criteria of <175 ppm for residual lead and achieving background concentrations for seven other project metals (antimony, cadmium, chromium, copper, mercury, nickel, and silver). Initial contaminant levels were measured as high as 86,000 ppm lead and 100,000 ppm copper, with average concentrations over 1,600 ppm each. In addition, both live and spent ordnance were removed in the soil treatment plant to meet the cleanup criteria. By combining soil washing and leaching, COGNIS and Bescorp were able to assemble a process which effectively treats all the soil fractions so that all soil material can be returned on-site, no wastewater is generated, and the heavy metals are recovered and recycled. No hazardous waste requiring landfill disposal was generated during the entire remedial operation.     

氟化工“三废”的资源化利用

结合我国氟化工行业发展现状,分析了含氟"三废"产生情况及处置方法的最新研究进展,并通过实际工程案例进行论述。氟化工生产过程污染物主要有含氟废气及副产氯化氢、含氟高沸物及含氟污泥等。通过将氯化氢用于工业清洗及制备氯化钙、氯化铝等化学品能够合理消耗副产盐酸。焚烧处理含氟有机废气产生的氟化氢气体经水洗后副产氢氟酸。含氟高沸物通过精馏分离出高沸物组分生产高附加值产品。含氟污泥可制成建筑材料,最优工业化利用途径仍在积极研究中。