Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Study on the Physico-mechanical Properties of Photo-cured Chitosan Films with Oligomer and Acrylate Monomer

Chitosan films were prepared from dried prawn shell via chitin and then tensile properties like tensile strength (TS) and elongation at break (Eb) of the films were evaluated. Six formulations were developed using methyl methacylate (MMA) monomer and aliphatic urethane diacrylate oligomer (M-1200) in methanol along with photoinitator (Darocur-1664). Then the films were soaked in the formulations and irradiated under UV radiation at different doses for the improvement of physico-mechanical properties of chitosan films. The cured films were characterized by measuring TS, Eb, polymer loading (PL), water absorption and gel content properties. The formulation containing 43% MMA and 15% oligomer in methanol solution showed the best performance at 20th UV pass for 4 min soaking time.     

Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1,6-Hexanediol Diacrylate (HDDA)

Jute yarns were grafted with a single impregnating monomer 1,6-hexanediol diacrylate (HDDA) in order to improve the physicomechanical properties. Jute yarns soaked for different soaking times (3, 5, 10, and 30 minutes) in HDDA+MeOH solutions at different proportions (1–10% HDDA in MeOH [v/v] along with photoinitiator Darocur-1664 [3%]) were cured under UV lamp at different UV radiation intensities (two, four, six, and eight passes). Concentration of monomer, soaking time, and intensity of UV radiation were optimized with extent of mechanical properties such as tensile strength, elongation at break, and modulus. Enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) were achieved with 5% HDDA concentration, 5-minute soaking time, fourth pass of UV radiation. To further improve the mechanical properties, the jute yarns were pretreated with UV radiation (5, 10, 15, 30, and 50 passes) and treated with optimized monomer concentration (5%). UV-pretreated samples showed the enhanced properties. The tensile strength and modulus increase up to 84% and 132%, respectively, than that of virgin jute yarn. An experiment involving water absorption capacity shows that water uptake by treated samples was much lower than that of the untreated samples. During the weathering test, treated yarns exhibited less loss of mechanical properties than untreated yarns.     

Improvement of Physico-mechanical Properties of Chitosan Films by Photocuring with Acrylic Monomers

Natural polymer, chitosan was obtained from dried prawn shell waste through the preparation of chitin and was characterized. Thin film of chitosan was prepared by casting method from its 2% chitosan solution. Mechanical properties like tensile strength (TS), elongation at break (Eb) of chitosan film were studied. Five formulations were developed with 2-ethyl-2-hydroxy methyl-1,3-propandiol trimethacrylate (EHMPTMA), a trifunctional monomer and 2-ethylhexyl acrylate (EHA), a monofunctional monomer in the presence of photoinitiator Darocur-1664 (2%). The film was soaked in those monomer formulations in dissimilar soaking times and irradiated under UV-radiation at different radiation intensities for the improvement of the properties of chitosan film. The cured films were then subjected to various characterization tests like TS, Eb, polymer loading (PL), water absorbency, gel content etc. The formulation, containing 25% EHMPTMA and 73% EHA showed the best performance at 10th UV passes of UV radiation for 4 min soaking time.     

Effect of Urea on the Mechanical Properties of Gelatin Films Photocured with 2-Ethylhexyl Acrylate

Thin films of gelatin were prepared by casting. Then the films were photocured and the mechanical properties were studied. The tensile strength of UV cured gelatin films showed about 10% enhancement than that of raw gelatin films. Minor amount of urea (1–5%) was used as additive in aqueous gelatin solution and films were prepared using same technique. Four formulations were prepared in methanol with 2-ethylhexyl acrylate in the presence of photoinitiator (darocur-1664). The films were soaked in the prepared formulations and then cured under UV radiation at different intensities (5–25 passes). Percentage of urea, monomer concentration, soaking time and radiation intensities were optimized with the extent of polymer loading, TS and elongation at break of the photocured film. The films containing 2% urea, cured with 3% EHA for 3 min at 15th UV pass showed the highest mechanical properties. A significant improvement of TS (31%) occurred when EHA (3%) was incorporated.     

Study on the Thermo-Mechanical and Biodegradable Properties of Shellac Films Grafted with Acrylic Monomers by Gamma Radiation

Shellac (SL) films were prepared by casting and were grafted with various acrylic monomers of different functionalities using gamma radiation. Different formulations of shellac with varying concentrations (3, 5 and 7%) of these acrylic monomers such as 2-hydroxyethyl methacrylate (HEMA), 2-ethylhexyl acrylate (EHA) and 1,4-butanediol diacrylate (BDDA) in methanol were prepared. The pure shellac and other treated films were then irradiated under gamma radiation (Co-60) at different doses (0.5–5 kGy) at a dose rate of 3.5 kGy/h where 1 Gy = 1 J/kg = 100 rads. The mechanical properties like tensile strength (TS) and elongation at break (Eb) of the prepared films were studied. The mechanical properties of the irradiated shellac films demonstrated superior values. Among the formulations, shellac grafted with BDDA (SL-g-BDDA) showed the highest TS and Eb values which were 543 and 168% higher than those of raw shellac films, respectively. The water uptake behavior of raw and treated films was also studied. The raw film showed 11% water uptake but HEMA containing film showed 67%. In the soil burial test, HEMA containing shellac film was rapidly degraded than other raw, EHA and BDDA grafted films. Thermal properties indicated that grafting of acrylic monomers decreased the melting temperature of the pure shellac films.     

Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method

This paper mainly focuses on the fabrication process of long fibre reinforced unidirectional thermoplastic composites made using both natural (untreated) treated jute yarns. Jute yarns were wound in layers onto a metallic frame. Polypropylene films were inserted between these layers and compression moulded to fabricate unidirectional jute/PP composite specimens. Static mechanical properties were evaluated from tensile three point bending tests. Pre- post-failure examination were carried out on the test specimens using optical scanning electron microscopy to analyse the test results and investigate the correlations between their impregnation state, processing conditions, mechanical performances and fracture morphologies. For the unidirectional jute/PP film-stacked composites, the results indicated that the processing condition at the moulding temperature of 160°C and moulding pressure of 2.0 MPa for 15 min was ideally suited to obtain optimized properties. Improved wettability of resin melts due to complete matrix fusion at this processing condition facilitated thorough impregnation with minimum microstructural imperfections (microvoids) being generated. Jute/PP composites that contained treated jute yarns have shown superiority in tensile bending properties. Jute yarns polished or coated with PVA/PP (polyvinyl alcohol/polypropylene) must have contributed positively to fibre/matrix interfacial interactions leading to matrix to fibre effective stress transfer, thereby improving their reinforcing effects. Tensile strength and modulus of PP resin increased by approximately 285% and 388%, respectively, due to 50 wt% reinforcement by natural jute yarns. Further improvements in strength and modulus were achieved by approximately 14% and 10%, respectively, when treated yarns were used . The maximum bending stress modulus of jute/PP composites containing untreated yarns were approximately 190% and 460% higher than those of the virgin PP materials, and bending properties were improved by further 11% and 23%, respectively, due to coating treatments on the yarn surface.     

Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation

Vinyl acetate (VAc) monomer of different percentage was grafted onto the recycled polyethylene terephthalate (r-PET) films using gamma irradiation. The properties of these modified films were characterized by Fourier transform infrared spectroscopy (FTIR), mechanical properties testing (Tensile strength, Elongation at break), dynamic mechanical analysis (DMA) and thermo-gravimetric analysis (TGA). The Tensile Strength (TS) of the modified PET film increased by 132.25?% to the highest value of 50.12 MPa at 15% VAc monomer concentration at 3 kGy gamma dose, while the elongation at break (EB) decreased by 31.83?%. FTIR was used to investigate the molecular interaction of the modified films. TGA revealed that curve of the modified PET film shifted toward higher temperature region by 95?°C, which is very close to that of PET film made from virgin flakes. The results indicate that modified PET films of better mechanical and thermal properties were successfully prepared using VAc monomer grafting by gamma irradiation technique.     

Fabrication and Characterization of Biodegradable Composite Films Made of Using Poly(caprolactone) Reinforced with Chitosan

Chitosan was dissolved in 2?% aqueous acetic acid solution and the films were prepared by solution casting. Values of tensile strength (TS), tensile modulus (TM), elongation at break (Eb?%) and water vapor permeability (WVP) of the chitosan films were found to be 30?MPa, 450?MPa, 8?% and 4.7?g?mm/m²?day?kPa, respectively. Poly(caprolactone) (PCL) films were prepared from its granules by compression molding and the values of TS, TM, Eb and WVP were 14?MPa, 220?MPa, 70?% and 1.54?g?mm/m²?day?kPa, respectively. PCL was reinforced with chitosan films, and composite films were prepared by compression molding. Amount of chitosan in the composite films varied from 10 to 50?% (w/w). It was found that with the incorporation of chitosan films in PCL, both the values of TS and TM of composite films increased significantly. The highest mechanical properties were found at 50?% (w/w) of chitosan content. The Oxygen transmission rate (OTR) of composite film was found to decrease significantly than PCL films. Thermal properties of the composite were also improved as compared to PCL. The water uptake test of the composite also showed promising results with a good stability of composite films. The interface of the composite was investigated by scanning electron microscopy and showed good interfacial adhesion between PCL and chitosan films.     

Effect of the Pretreatment with UV and Gamma Radiations on the Modification of Plywood Surface by Photocuring with Epoxy Acrylate

In order to further improve the physical properties of plywood surface that was pretreated with UV and Gamma radiation at different radiation intensities before photocuring. After pretreatment with radiation the plywood surface was coated with different prepared formulations containing epoxyacrylate (EA-1020) as an oligomer, difunctional monomers such as tripropylene glycol diacrylate (TPGDA), 2-hexadioldiacrylate (HDDA), Ethylene Glycol dimethacrylate (EGDMA) and trifunctional monomer trimethyl propen triacrylate (TMPTA) with photoinitiator Darocur 1664. Thin polymer films were prepared on glass plate with these formulated solutions and cured under UV radiation. Pendulum hardness (PH) and gel content of the film were studied for selecting the formulations as top coat and as base coat. The polished plywood surface was coated with selected formulation and cured under UV radiation. Various rheological properties of UV cured plywood surface such as pendulum hardness, scratch hardness, microgloss, adhesion strength, percentage chipped off area and abrasion resistance were studied.     

Natural Weathering Studies of Polypropylene

Polypropylene (PP) has achieved a dominating position and hence, their consumption increases thereby littering, which lead to environmental pollution. Photodegradation seems to be a better choice because of naturally available sunlight as energy source for degradation. The present work involves the study of the variation of degradation behavior of PP film during tropical summer and winter seasons. The photodegradation is followed by Fourier transform infrared (FTIR) spectroscopic technique. Various indices like hydroxyl, carbonyl, vinylidene, lactones, ester, carboxylic acid and crystallinity are calculated and these values increased after a brief induction period. The variation in the mechanical properties like tensile strength and elongation at break percentages are determined. The scanning electron microscopic (SEM) images of weathered PP showed surface cracks when carbonyl index value increases sharply and the mechanical properties show a sudden decrease. Attempted life time prediction using mathematical models showed that the carbonyl growth is more affected by ultraviolet (UV) and cumulative total solar radiation for PP weathered during summer. The loss in tensile strength of PP weathered during summer is more dependent on the average temperature and the UV portion of the total solar radiation whereas, intensity of UV radiation has profound effect on the tensile strength of PP weathered during winter.     

Properties of Starch/PVA Blend Films Containing Citric Acid as Additive

Starch/polyvinyl alcohol (PVA) blend films were prepared successfully by using starch, polyvinyl alcohol (PVA), glycerol (GL) sorbitol (SO) and citric acid (CA) for the mixing process. The influence of mixing time, additional materials and drying temperature of films on the properties of the films was investigated. With increase in mixing time, the tensile strength (TS), elongation (%E), degree of swelling (DS) and solubility (S) of the film were equilibrated. The equilibrium for TS, %E, DS and S value was 20.12 MPa, 36.98%, 2.4 and 0.19, respectively. The mixing time of equilibrium was 50 min. TS, %E, DS and S of starch/PVA blend film were examined adding glycerol (GL), sorbitol (SO) and citric acid (CA) as additives. At all measurement results, except for DS, the film adding CA was better than GL or SO because hydrogen bonding at the presence of CA with hydroxyl group and carboxyl group increased the inter/intramolecular interaction between starch, PVA and additives. Citric acid improves the properties of starch/PVA blend film compared to glycerol and sobitol. When the film was dried at low temperature, the properties of the films were clearly improved because the hydrogen bonding was activated at low temperature.     

Biodegradability of Chemically Modified Starch (RS4)/PVA Blend Films: Part 2

Biodegradable films were successfully prepared by using cornstarch (CS), chemically modified starch (RS4), polyvinyl alcohol (PVA), glycerol (GL), and citric acid (CA). The physical properties and biodegradability of the films using CS, RS4, and additives were investigated. The results of the investigation revealed that the RS4-added film was better than the CS-added film in tensile strength (TS), elongation at break (%E), swelling behavior (SB) and solubility (S). Especially, the RS4/PVA blend film with CA as an additive showed physical properties superior to other films. Furthermore, when the film was dried at low temperature, the properties of the films clearly improved because the hydrogen bonding was activated at low temperature. The biodegradation of films was carried out using the enzymatic, microbiological and soil burial test. The enzyme used in this study was amyloglucosidase (AMG), α-amylase (α-AM) and β-amylase (β-AM). At the enzymatic degradation test, the GL-added films had an approximately 60% degradation, while the CA-added films were degraded about 25%. The low degradation value on CA-added film is attributed to low pH of film added CA that deactivated the enzymatic reaction. The microbiological degradation teat was performed by using Bacillus subtilis and Aspergillus niger.     

Synthesis and Properties of <Emphasis Type="Italic">N</Emphasis>-Maleyl Chitosan-Cross-Linked Poly(Acrylic Acid-co-Acrylamide) Superabsorbents

A high-swelling superabsorbent was synthesized with biodegradable N-maleyl chitosan as cross-linker, acrylic acid (AA) and acrylamide (AM) as the monomers, ammonium peroxodisulfate–sodium bisulfite (NaHSO₃) as redox initiation system, by means of aqueous solution polymerization. The best reaction condition was based on the orthogonal experiment design. The optimal conditions on distilled water absorbency and on 0.9 wt% NaCl solution absorbency were monomer concentration 20 wt%, mole ratio of AA to (AA + AM) 60%, the neutralization degree of AA 40%, cross-linker concentration 2% and monomer concentration 25 wt%, mole ratio of AA to (AA + AM) 60%, neutralization degree of AA 50% and cross-linker concentration 1%, respectively. Factors influencing the water absorbency of superabsorbent also were investigated, by single factor experiment method. The absorbency of superabsorbents in distilled water and 0.9 wt% NaCl solution increased and then decreased with the increasing of monomer concentration, mole ratio of AA to (AA + AM) and degree of neutralization of AA. With the increasing of cross-linker concentration, the absorbency in distilled water increased and then decreased, but it decreased all the time in 0.9 wt% NaCl solution. In enzymatic degradation tests, the weight loss of superabsorbent was related to the content of cross-linker.     

Preparation and Characterization of Gamma Irradiated Sugar Containing Starch/Poly (Vinyl Alcohol)-Based Blend Films

Blends based on different ratios of starch (35–20%) and plasticizer (sugar; 0–15%) keeping the amount of poly(vinyl alcohol) (PVA) constant, were prepared in the form of thin films by casting solutions. The effects of gamma-irradiation on thermal, mechanical, and morphological properties were investigated. The studies of mechanical properties showed improved tensile strength (TS) (9.61 MPa) and elongation at break (EB) (409%) of the starch-PVA-sugar blend film containing 10% sugar. The mechanical testing of the irradiated film (irradiated at 200 Krad radiation dose) showed higher TS but lower EB than that of the non-radiated film. FTIR spectroscopy studies supported the molecular interactions among starch, PVA, and sugar in the blend films, that was improved by irradiation. Thermal properties of the film were also improved due to irradiation and confirmed by thermo-mechanical analysis (TMA), differential thermo-gravimetric analysis (DTG), differential thermal analysis (DTA), and thermo-gravimetric analysis (TGA). Surface of the films were examined by scanning electron microscope (SEM) image that supported the evidence of crosslinking obtained after gamma irradiation on the film. The water up-take and degradation test in soil of the film were also evaluated. In this study, sugar acted as a good plasticizing agent in starch/PVA blend films, which was significantly improved by gamma radiation and the prepared starch-PVA-sugar blend film could be used as biodegradable packaging materials.     

Characterization of EVA/PLA Blends When Exposed to Different Environments

EVA/PLA blends compatibilized with EVA-g-PLA grafted copolymers synthesized by reactive extrusion, through transesterification reaction between ethylene-vinyl-acetate (EVA) and polylactide (PLA) using titanium propoxide (Ti(OPr)₄) as catalyst, were characterized when exposed to different environments. Stability to UV radiation was assessed exposing the samples to a Xenon lamp, which simulates the sun UV spectrum and the biodegradability was evaluated by biochemical oxygen demand (BOD) in a closed respirometer. Exposed samples were removed periodically and analyzed by several analytical techniques, such as, FTIR, DSC, rheology and tensile tests. The results obtained evidenced that UV radiation induces structural modifications, which affect substantially rheological and mechanical properties. Moreover, the blend with higher amount of copolymer exhibits lower photo durability and greater biodegradability. From the environmental point of view, these new materials are very promising for application with short lifetime, like packaging.     

Effect of Hydrothermal Aging on Injection Molded Short Jute Fiber Reinforced Poly(Lactic Acid) (PLA) Composites

This work focused on the durability of short jute fiber reinforced poly(lactic acid) (PLA) composites in distilled water at different temperatures (23, 37.8 and 60 °C). Morphological, thermal and mechanical properties (tensile, flexural, and impact) of jute/PLA composites were investigated before and after aging. Different from traditional synthetic fiber reinforced polymer composites, the stability of jute/PLA composites in water was significantly influenced by hydrothermal temperature. The mechanical properties of the composites and molecular weight of PLA matrix declined quickly at 60 °C, however, this process was quite slower at temperatures of 23 and 37.8 °C. Impact properties of the composites were hardly decreased, but the tensile and flexural properties suffered a drop though to various degrees with three degradation stages at 23 and 37.8 °C. The poor interface of composites and the degradation of PLA matrix were the main damage mechanism induced by hydrothermal aging. Furthermore, considering the hydrolysis of PLA matrix, the cleavage of PLA molecular chain in different aging time was quantitatively investigated for the first time to illustrate hydrolysis degree of PLA matrix at different aging time.     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

Photochemical oxidation of p-chlorophenol by UV/H2O2 and photo-Fenton process. A comparative study

In this study, photochemical advanced oxidation processes (AOPs) utilizing the combinations of UV/H2O2 and the photo-Fenton reaction (UV + classical Fenton reaction) were investigated in lab-scale experiments for the degradation of p-chlorophenol. The study showed that the photo-Fenton process, (a mixture of hydrogen peroxide and ferrous or ferric ion), was the most effective treatment process under acidic conditions and produced a higher rate of degradation of p-chlorophenol at a very short radiation time. It accelerated the oxidation rate by 5-9 times the rate for the UV/H2O2 process. The reaction was found to follow the first order, the reaction was influenced by the pH, the input concentration of H2O2 and the amount of the iron catalyst and the type of iron salt. The experimental results showed that the optimum conditions were obtained at a pH value of 3, with 0.03 mol/l H2O2, and 1 mmol/l Fe(II) for the UV/H2O2/Fe(II) system and 0.01 mol/l H2O2 and, 0.4 mmol/l Fe(III) for the UV/H2O2/Fe(III) system. The reactions were accompanied by the generation of Cl- which reached its maximum value at a short reaction time when using the photo-Fenton process. Finally a rough comparison of the specific energy consumption shows that photo-Fenton process reduced the energy consumption by at least 73 to 83% compared with the UV/H2O2 process.     

Laccase-Assisted Grafting of Acrylic Acid onto Lignin for its Recovery from Wastewater

The acrylic acid (AA) in the wastewater from paint manufacturing could be recovered by grafting to lignosulfonate in the presence of laccase and tert-butyl hydroperoxide (t-BHP). The low concentration of t-BHP did not inhibit the laccase activity, but improved the radical formation on lignin by laccase reaction, then initiated AA polymerization on lignin. The results showed laccase took a significant role for AA grafting to lignin. 94 % of AA could be polymerized on lignin by laccase/t-BHP, while only 32 % of AA was grafted on lignin with the same condition without laccase. The ratio of lignin to acrylic acid also affected AA recovery, and higher concentration of acrylic acid led to high recovery rate of AA. In this reaction system, the suitable range of temperature was 30–40 °C for the chemo-enzymatic reaction. The AA grafted on lignin could be precipitated by calcium ion and recovered.