Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

A Global Outlook to the Carbon Dioxide Emissions in the World and Emission Factors of the Thermal Power Plants in Turkey

World primary energy demand increases with increases in population and economic development. Within the last 25 yr, the total energy consumption has almost doubled. For the purpose of meeting this demand, fossil energy sources are used and various pollutants are generated. CO₂ is also one of these gases, which cannot be removed like other pollutants, and it causes greenhouse effect and climate change. Reducing the CO₂ emission is very important because of the environmental concerns and regulations, especially the Kyoto Protocol. This paper reviews the estimated world carbon emissions, Turkey's situation in electrical energy production, emission amounts estimated until the year 2020 and emission factors for dust, SO₂, NO_x and CO₂. The estimated results show that CO₂ emissions from thermal power plants in Turkey will make about 0.66 % of the global CO₂ emissions in 2020.     

The Role of Catalyst Properties on Methanol Oxidation over V2O5–TiO2 Using Ozone

Oxidation of methanol over V₂O₅ catalysts supported on anatase TiO₂ that were prepared using sol-gel formation and impregnation procedures were investigated. The effects of incorporating Mg in sol-gel to influence the properties of the catalyst were also studied. The process provides an alternative low temperature reaction pathway for reducing emissions of hazardous air pollutant (HAPs) such as methanol and total reduced sulfur compounds (TRS) from pulp and paper mills. The bulk and surface composition of the catalysts were determined by XRD and SEM-EDAX, respectively. The X-ray diffraction patterns of the vanadia–titania catalysts showed mainly the anatase phase of TiO₂. Temperature programmed desorption of methanol from the different catalyst showed that the α and β peaks differ significantly with V content and addition of Mg. The combination of gas phase and surface reactions on the V/TiO₂ catalysts reduced the amount of ozone required for high degradation of methanol to mainly CO _x with small quantities of methyl formate. In the absence of ozone the catalysts showed very low activity. It is hypothesized that the ozone is directly influencing the V⁴⁺ and V⁵⁺ redox cycle of the catalyst. Oxidation of methanol is influenced by the operation variables and catalyst properties. The results of this study revealed that the V content has significant influence on the catalyst activity, and the optimum vanadia loading of about 6 wt%. Higher turnover frequencies were observed over sol-gel catalysts than with catalysts prepared by the impregnation method.     

Bioremediation of Chromate by Sulfate-Reducing Bacteria, Cytochromes c3 and hydrogenases

The treatment of soils and ground waters polluted by heavy metals is of economical and environmental interest. Reduction of Cr(VI) to the less toxic Cr(III) associated to its precipitation is a potentially useful process for bioremediation. In order to develop ecological processes using micro-organisms, we have compared various sulfate-reducing bacteria for enzymatic reduction of chromate. The best Cr(VI) reductase activity was obtained with Desulfomicrobium norvegicum. Despite morphological changes induced by the presence of chromate, this strain can grow in the presence of up to 500 M Cr(VI) and can decontaminate waters polluted by Cr(VI) when seeded in bioreactors. We have demonstrated the ability of several metalloenzymes (cytochromes c ₃ and hydrogenases) to reduce chromate. Biophysical investigations of the chromate/protein interaction in order to get further informations on the mechanism of metal reduction by cytochromes c ₃ are under the way.     

Preliminary environmental impact assessment of PFOS waste treatment in a lab-scale batch subcritical water decomposition operation

Life cycle assessment (LCA) was carried out by SimaPro 7.3 to study the environmental impact of a lab-scale batch subcritical water decomposition operation for a kilogram of Perfluorooctane sulfonic acid (PFOS) waste treatment in this study, a proven process for the decomposition of PFOS pollutants with high concentration. This LCA focuses on not only the main environmental factors from emissions of toxic pollutants, but also the influence from technical characteristics of the iron-induced subcritical water technology including energy and substances consumption during the subcritical water decomposition treatment process. The IMPACT 2002+ environmental model was used to evaluate the 15 midpoint and 4 end-point environmental damages. It was found that the energy consumption to sustain the high temperature (350 °C) and high pressure (23 MPa) in the subcritical water process contributes 99.8 % of the damages. The total negative impact of the SCWD process for 1 kg of PFOS waste treatment to human health, ecological quality, climate change and resources amounts to 1.11 × 10^?3, 8.43 × 10^?5, 9.76 × 10^?4, 9.05 × 10^?4 Pt, respectively. And the improvement of energy efficiency and catalytic effectiveness are two important factors to reduce the environmental impact from the SCWD process for the treatment of PFOS waste.     

Identification,Abundance and Origin of Aliphatic Hydrocarbons in the Fine Atmospheric Particulate Matter of Athens,Greece

The organic chemical composition of the fine fraction of atmospheric particulate matter in Athens has been studied, in order to establish emission sources. The results of the analyses of the aliphatic fraction indicate that all samples contain n-alkanes ranging from C₁₄ to C₃₂, with C₂₅, C₂₆, C₂₇ and C₂₉ being the more abundant congeners. Fossil fuels biomarkers such as extended tricyclic terpanes (hopanes, steranes) and isoprenoid hydrocarbons (pristane, phytane) were observed in our samples on a daily basis. Source reconciliation was conducted using molecular diagnostic ratios (such as the carbon preference index – CPI). The mean CPI value (1.84) indicates the mixed origin of the Athenian fine particles. The notable presence of an unresolved complex mixture or “hump” of hydrocarbons in our gas chromatograms is indicative of petrogenic hydrocarbon inputs. An approximate measure of this kind of contamination is the ratio of the concentrations of unresolved components to the resolved n-alkanes and other major compounds (U:R). The high U:R value of 25.25 further confirmed the major contribution of fossil fuels. Yet, the percent contribution of leaf wax n-alkanes (25.15%) indicated the parallel contribution of biogenic sources. This work supports the conclusion that vehicular emissions were the major source of aliphatic organic compounds with a smaller contribution of biogenic n-alkanes during the study period in Athens.     

Comparative goal-oriented assessment of conventional and alternative sewage sludge treatment options

Phosphorous (P) is a limited and non-substitutable resource. Sewage sludge contains significant amounts of P and is therefore a widely applied fertilizer. Due to its organic and inorganic contaminants, sewage sludge is also combusted in industrial facilities as well as in waste incinerators. This study compares five common methods and one novel alternative based on a thermo-chemical process to treat and dispose of sewage sludge with regard to environmental impact, resource recovery, and materials dissipation. The comparison is based on material flow analysis, energy balances, selected LCA impact analysis, and statistical entropy analysis. This work shows that the novel technology combines both advantages of the established practices: organic and inorganic pollutants are either destroyed or removed from the P containing material, and the P returned to the soil exhibits high plant-availability. The novel method also has low emissions. The additional energy requirements should be reduced. However, with regards to sewage sludge P recovery is more important than energy recovery.     

Characteristics of air pollution in Beijing during sand-dust storm periods

In the Beijing area, March and April have the highest frequency of sand-dust weather. Floating dust, blowing sand, and dust storms, primarily from Mongolia, account for 71%, 20%, and 9% of sand-dust weather, respectively. Ambient air monitoring and analysis of recent meteorological data from Beijing sand-dust storm periods revealed that PM₁₀ mass concentrations during dust storm events remained at 1500 μg m⁻³, which is five to ten times higher than during non-dust storm periods, for fourteen hours on both April 6 and 25, 2000. During the same period, the concentrations in urban areas were comparable to those in suburban areas, while the concentrations of gaseous pollutants, such as SO₂, NO _x , NO₂, and O₃, remained at low levels, owing to strong winds. Furthermore, during sand-dust storm periods, aerosols were created that consisted not only of many coarse particles, but also of a large quantity of fine particles. The PM_2.5 concentration was approximately 230 μg m⁻³, accounting for 28% of the total PM₁₀ mass concentration. Crustal elements accounted for 60–70% of the chemical composition of PM_2.5, and sulfate and nitrate for much less, unlike the chemical composition of PM_2.5 on pollution days, which was primarily composed of sulfates, nitrates, and organic material. Although the very large particle specific surface area provided by dust storms would normally be conducive to heterogeneous reactions, the conversion rate from SO₂ to SO₄ ²⁻ was very low, because the relative humidity, less than 30%, was not high enough.     

Energy and Enviromental Issues in Turkey

The current and future projections of energy utilisation and related environmental impact has been given. Due to the heavy dependance on low grade lignites and imported hard coal, Turkey is going to have problems in the control of CO₂ emissions. Turkey was at first included as an Annex I country according to Kyoto Protocol. Later, it has been removed from the list which is justified considering the previous international environmental impact control applications and relatively much lower energy utilisation in Turkey, compared to Annex I countries. Therefore, Turkey has been removed from the Annex I list.Turkish power generation, industrial and transportation sector will be facing a difficult challenge over the coming 20 yr in complying with environmental impact levels. The developments in the liberalisation of Turkish energy sector since the 1980's is a positive step to overcome the problems.     

European Union waste management strategy and the importance of biogenic waste

In the European Union (EU), waste management is almost totally regulated by EU directives, which supply a framework for national regulations. The main target in view of sustainability is the prevention of direct disposal of reactive waste in landfills. The tools to comply with these principles are recycling and material recovery as well as waste incineration with energy recovery for final inertization. The adaptation of the principles laid down in EU directives is an ongoing process. A number of countries have already enacted respective national regulations and their realization shows that recycling and incineration are not in competition but are both essential parts of integrated waste management systems. In the EU, the amount of residual waste available for energy recovery can supply approximately 1% of the primary energy demand. About 50% of the energy inventory of municipal solid waste (MSW) in most EU countries is of biogenic origin, and MSW is to the same extent to be looked upon as regenerative fuel. Hence part of the CO₂ released from waste incineration is climate neutral. In the EU, this share could produce savings of the order of 1% of annual CO₂ emissions if energy from MSW replaced that derived from fossil fuel.     

Processing National CO2 Inventory Emissions Data and their Total Uncertainty Estimates

The uncertainty of reported greenhouse gases emission inventories obtained by the aggregation of partial emissions from all sources and estimated to date for several countries is very high in comparison with the countries’ emissions limitation and reduction commitments under the Kyoto Protocol. Independent calculation of the estimates could confirm or question the undertainty estimates values obtained thus far. One of the aims of this paper is to propose statistical signal processing methods to enable calculation of the inventory variances. The annual reported emissions are used and temporal smoothness of the emissions curve is assumed. The methods considered are: a spline-function-smoothing procedure; a time-varying parameter model; and the geometric Brownian motion model. These are validated on historical observations of the CO₂ emissions from fossil fuel combustion. The estimates of variances obtained are in a similar range to those obtained from national inventories using TIER1 or TIER2. Additionally, some regularities in the observed curves were noticed.     

Tools for evaluation of impact associated with MSW incineration: LCA and integrated environmental monitoring system

The identification of significant pollutants emitted from the contamination source is the first step in evaluating the impact associated with anthropic activity. Municipal solid waste (MSW) incinerators are still generally perceived as great pollutant sources, in particular due to their gaseous emissions from the stack, which constitute the major effluent from the plant. In this work a life cycle assessment and an integrated environmental monitoring system were applied together, in order to obtain complete information about the incineration process and its environmental impact. The former is a proven methodology, but its application to waste management systems constitutes a relatively new field of application with a great developmental potential. The contribution of the incineration process to the different environmental impact categories was investigated, finding many avoided impacts due to energy recovery. The latter is an innovative approach that allows a remarkable understanding of impact due to a contamination source; interesting correlations were found between heavy metals both in gas emissions and in natural matrices in the surroundings.     

PM10, O3, CO Concentrations and Elemental Analysis of Airborne Particles in a School Building

Measurements of indoor and outdoor PM10, as well as indoor O₃ and CO concentrations were conducted and are presented here. These measurements were carried out at an institute building, located in a suburban industrial area in Greece. Both indoor and outdoor PM10 samples were also collected and their elemental composition was identified by ED-XRF analysis. Twenty seven major, minor and trace elements were identified. The measurements took place generally in different periods of institute operation, from June 2004 to February 2005. The indoor PM10 concentrations which were measured during the normal operation period of the institute were found to be many times higher than the respective outdoor PM10 concentrations of the same periods. On the contrary, the indoor PM10 concentrations which were measured during the holiday period were found to be lower than their corresponding outdoor values. Indoor O₃ and CO concentrations were found to be in low level. Indoor PM10 concentrations were found to be in a relative good correlation with O₃ (r = 0.45) and in high correlation (r = 0.98) with CO concentrations. On average, total elements concentrations were much higher indoors relative to outdoors. Based on above findings we attempted to determine the pollution sources of the indoor environment and to investigate some parameters or chemical processes that affect indoor pollutants’ levels.     

Supervisory control of a selective catalytic reactor for NOx removal in incineration plants

The purpose of this work is to present an industrial application of an optimization tool for the supervisory control of the NO_x reduction section. This work does not pretend to address any new technique of NO_x reduction but rather to show the results obtained when a comprehensive on-line optimization tool has been successfully applied. The optimization procedure consists of the search of the best working conditions that satisfy the operating and legal constraints, in terms of emission amounts and combustion quality. This procedure adopts a simulation algorithm and data reconciliation tool to verify and improve the consistency of the calculated values by experimental data. Using such algorithm it is possible to identify all the updated data necessary to optimize the plant's performance. Specifically, the DeNO_x section optimization, both from an economical and environmental point of view, is strongly related to the estimation of the nitrogen waste mass fraction together with the catalytic reactor efficiency. The results obtained in many case studies show that it is possible to achieve the desired performance and to reduce the operating costs by defining the optimal operating temperature and the corresponding amount of ammonia required for the catalytic reduction of NO_x subject to the emission limits. These tools were successfully tested on a municipal waste incineration plant.     

An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland

A process model of municipal solid waste incinerators (MSWIs) and new technologies for metal recovery from combustion residues was developed. The environmental impact is modeled as a function of waste composition as well as waste treatment and material recovery technologies. The model includes combustion with a grate incinerator, several flue gas treatment technologies, electricity and steam production from waste heat recovery, metal recovery from slag and fly ash, and landfilling of residues and can be tailored to specific plants and sites (software tools can be downloaded free of charge). Application of the model to Switzerland shows that the treatment of one tonne of municipal solid waste results on average in 425 kg CO₂-eq. generated in the incineration process, and 54 kg CO₂-eq. accrue in upstream processes such as waste transport and the production of operating materials. Downstream processes, i.e. residue disposal, generates 5 kg CO₂-eq. Savings from energy recovery are in the range of 67 to 752 kg CO₂-eq. depending on the assumptions regarding the substituted energy production, while the recovery of metals from slag and fly ash currently results in a net saving of approximately 35 kg CO₂-eq. A similar impact pattern is observed when assessing the MSWI model for aggregated environmental impacts (ReCiPe) and for non-renewable resource consumption (cumulative exergy demand), except that direct emissions have less and no relevance, respectively, on the total score. The study illustrates that MSWI plants can be an important element of industrial ecology as they provide waste disposal services and can help to close material and energetic cycles.     

Increase of Ozone Concentration in an Inland Basin During the Period of Nocturnal Thermal High

Since ground level ozone concentrations in the basin on one day before the occurrence of unusually high air temperature with nocturnal thermal high showed a typical urban type of a maximum ozone concentration at 1300 LST and a minimum at night. However, a maximum ozone concentration under extremely high air temperature of 39.2 °C was detected at 1700 LST or 1800 LST at two environmental monitoring sites, which was 4 or 5 hr delayed from the typical occurrence time, 1300 LST. Its maximum value showed about 50 or 70% increase of the concentration more than the typical maximum value and its concentration gradually decreased until 2100 LST. After 1200 LST until 1800 LST, air temperature was maintained over 35 °C and the high temperature made a great contribution to the increase of O₃ for several hours. The deviated occurrence time of a maximum ozone concentration is mainly attributed to meteorological and topographic effects – shifted occurrence time of maximum air temperature, shrunken atmospheric boundary layer depth and wind. While daytime O₃ concentration due to photochemical production of O₃ from NO₂ increased, NO₂ concentration decreased, with their reverse respondent patterns each night. A secondary maximum concentration of O₃ at 2300 LST or 2400 LST is due to a much shallower depth of nocturnal surface inversion layer with daytime producing more O₃ than that of the daytime convective boundary layer, resulting in the increase of ozone concentration, though the reduction of ozone occurred under the reversal process of O₃ into NO₂.     

Circulating fluidized bed incineration of industrial solid wastes

A pilot scale test facility of a circulating fluidized bed incinerator was established to generate design and operation data and help assess the technical feasibility for industrial applications. The use of high turbulence in the combustion zone and feeding an acid-capturer directly into the incinerator to absorb acid gases eliminates the costly afterburner and scrubber. This paper presents some systematic incineration tests of uniform industrial wastes such as paper mill sludge cake, rubber waste and petroleum coke. Sludge cakes with high moisture and low heating values can be treated to a low emission level by co-firing with coal. The high superficial gas velocity has improved combustion efficiency but increases NO_x emissions. However, sulphur content has almost no influence on sulphur retention. The problems of CO/NO_x emissions and circulation stability are also discussed.     

Cost-effectiveness Analysis of Reducing the Emission of Nitrogen Oxides in Asia

The purpose of this study is to evaluate cost-effective reduction strategies for nitrogen oxides (NO _x ) in the Asian region. The source-receptor relationships of the Lagrangian “puff” model of long-range transportation, ATMOS-N, were used to calculate the wet/dry deposition of the nitrogen (N) in Asia. Critical loads of N deposition in Asia were calculated from the relationships between the critical load of sulfur (S) and balance of N in and out using the data of S critical load of RAINS-ASIA. The cost functions of N reduction of Asian countries were derived by the regression analysis with the data of cost functions of European countries used in RAINS. In order to assess the environmental impact, the gaps between N deposition and critical load of N were calculated. The emission of NO _x was reduced in some cases of this model, and the changes of gaps between N deposition and critical load were observed as well as the changes of the reduction cost. It is shown that a uniform reduction of NO _x emissions by countries in Asia is not cost-effective strategy.     

Production of natural and recycled aggregates: the environmental impacts of energy consumption and CO<Subscript>2</Subscript> emissions

Natural aggregates (NA) are crushed and processed in crushing plants after the extraction stage in quarries. In the present study, the aggregates are divided into three scenarios, depending on the production methods. The first scenario considers the production of NA, the second scenario deals with the production of recycled aggregates (RA) with respect to construction and demolition waste, and the third scenario, which is a hybrid scenario, handles the combination of NA and RA by assuming a 50% mixing percentage. In this research, we assess the environmental impacts on the production of aggregates via each scenario, using life cycle assessment; in addition, energy consumption and CO₂ emissions are considered as the environmental variables. We conclude that Iran’s current policy with an annual energy consumption of 1.48 million tons of oil equivalent (toe) can have a footprint of 2.88 million tons of CO₂ eq emissions per year (the first scenario). Achieving 30 and 36% reduction in annual energy consumption and CO₂ emissions, respectively, by the third scenario compared to the first scenario indicates the destructive effect of the first scenario from the environmental outlook.     

Characterization, leachability and valorization through combustion of residual chars from gasification of coals with pine

This paper presents the study of the combustion of char residues produced during co-gasification of coal with pine with the aim of characterizing them for their potential use for energy. These residues are generally rich in carbon with the presence of other elements, with particular concern for heavy metals and pollutant precursors, depending on the original fuel used.The evaluation of environmental toxicity of the char residues was performed through application of different leaching tests (EN12457-2, US EPA-1311 TCLP and EA NEN 7371:2004). The results showed that the residues present quite low toxicity for some of pollutants. However, depending on the fuel used, possible presence of other pollutants may bring environmental risks.The utilization of these char residues for energy was in this study evaluated, by burning them as a first step pre-treatment prior to landfilling. The thermo-gravimetric analysis and ash fusibility studies revealed an adequate thermochemical behavior, without presenting any major operational risks.Fluidized bed combustion was applied to char residues. Above 700 °C, very high carbon conversion ratios were obtained and it seemed that the thermal oxidation of char residues was easier than that of the coals. It was found that the char tendency for releasing SO₂ during its oxidation was lower than for the parent coal, while for NO_X emissions, the trend was observed to increase NO_X formation. However, for both pollutants the same control techniques might be applied during char combustion, as for coal. Furthermore, the leachability of ashes resulting from the combustion of char residues appeared to be lower than those produced from direct coal combustion.