Nitrogen Trioxide: Key Intermediate in the Chemistry of Polluted Air?

It is proposed that peroxyacetyl nitrate and its homologues are formed in polluted air via hydrogen abstraction from the corresponding aldehyde by nitrogen trioxide, followed by (a relatively fast) combination of the resulting acyl radical with oxygen and NO₂. This mechanism provides a simple explanation for the formation of nitric acid, HNO3, as well. Nitrogen trioxide should be able to abstract hydrogen atoms from hydrocarbons, since the H-ONO₂ bond strength is about 100 kcal/mole.     

Fourteenth National Congress of the Environmental and Cultural Heritage Chemistry Division, “Chemistry in a Sustainable Society,” held in Rimini (Italy) in June 2013

This report briefly presents the aims and the fields of interest of the Environmental and Cultural Heritage Division (Italian Chemical Society) and the issues addressed during its national congress, held in Rimini in June 2013. The broad range of topics raised by different speakers, the variety of affiliations and institutions participating at the conference, the scientific organisations and private companies co-sponsoring the different sessions give a clear picture of the interdisciplinarity which is a hallmark of this division.     

Sorption of lead in soil as a function of pH: a study case in México

Reactions of lead sorption onto soil are largely affected by properties and composition of soil and its solution. In this study, the lead sorption onto regosol eutric soil from Francisco I. Madero, Zacatecas, Mexico is evaluated at different pH values. Soil samples were suspended in lead solutions of 10, 25, 50, 100, 150, 200, 300, and 400 mg/l (as Pb(NO3)2). The pH was adjusted at 2, 3, 4, and 5.5 with nitric acid for each of the lead solution concentrations. In all the cases the ionic strength was I=0.09 M with calcium nitrate. The solid-liquid-ratios were fixed in 1:100 and 1:200 g/ml. The results show that lead sorption increases when pH increases. Experimental isotherms were adjusted by both Langmuir and Freundlich models. The Langmuir affinity parameter, K, indicates that the lead sorption capacity of Francisco I. Madero soils is largely perceptible to pH changes.     

Is Green Chemistry a feasible tool for the implementation of a circular economy?

Environmental Science and Pollution Research - The main goal of this research is to evaluate the contributions of Green Chemistry as a potential tool to drive the transition to circularity. For...     

The greenhouse work environment: a modifier of occupational pesticide exposure?

Abstract

Greenhouses are enclosed structures which have various characteristics that enhance crop productivity, but the implications for workers’ pesticide exposure and uptake are not well understood. A narrative literature review was conducted to explore the mechanism/s of interactions between greenhouse characteristics and occupational pesticide exposure. Using a “work”, “worker” and “workplace” conceptual framework, the greenhouse environment (hot and humid microclimate, limited space and dense crop arrangements) combines with work characteristics (high work and pesticide use intensity, multi-tasking, predominantly manual spraying techniques and quick reentry to treated farms) to potentially increase occupational pesticide exposure, compared with open field farming. Greenhouse environments, are variable but have been shown to influence pesticide availability, route, pathways and frequency of exposure, deposition and distribution on a worker’s body as well as use and performance of exposure control methods. Training programs can emphasize the differences in exposure potential between greenhouse and open field farming. Development of tailored guidelines for exposure control strategies to better suit the level of uniqueness of greenhouse agriculture seems warranted.     

Multifaceted Value Profiles of Forest Owner Categories in South Sweden: The River Helge å Catchment as a Case Study

Forest landscapes provide benefits from a wide range of goods, function and intangible values. But what are different forest owner categories’ profiles of economic use and non-use values? This study focuses on the complex forest ownership pattern of the River Helge å catchment including the Kristianstad Vattenrike Biosphere Reserve in southern Sweden. We made 89 telephone interviews with informants representing the four main forest owner categories. Our mapping included consumptive and non-consumptive direct use values, indirect use values, and non-use values such as natural and cultural heritage. While the value profiles of non-industrial forest land owners and municipalities included all value categories, the forest companies focused on wood production, and the Swedish Environmental Protection Agency on nature protection. We discuss the challenges of communicating different forest owners’ economic value profiles among stakeholders, the need for a broader suite of forest management systems, and fora for collaborative planning.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-012-0374-2) contains supplementary material, which is available to authorized users.     

Remembering the Ultimate Goal of Environmental Protection: Including Protection of Impoverished Citizens in China’s Environmental Policy

The life of impoverished people can be damaged by adverse environmental conditions, but these people can also be harmed by environmental conservation programs, particularly when the guiding policy ignores their needs. To improve the social and economic effectiveness of environmental protection, governments must understand that the ultimate goal of environmental protection is to improve human livelihoods, not just restore vegetation. The elimination of poverty by the development of sustainable, long-term enterprises is a precondition for successful ecological restoration.     

Local stakeholders' acceptance of model-generated data used as a communication tool in water management: The Rönneå Study

The objective of this study was to increase the knowledge of local stakeholders' acceptance of model-generated data when used as a communication tool in water quality management. The R?nne? catchment in the southwest of Sweden was chosen as the study area. The results indicate the model-generated data served as a uniting factor. Simultaneously, the stakeholders were concerned with presented data, the main problems being sources of pollution, which were not accounted for, lack of trustworthiness when measuring pollution, and the uncertainty of the impact of natural variation and delayed effects. Four clusters of factors were identified as influencing stakeholders' acceptance of the model-generated data: confidence in its practical applications, confidence in the people involved in or providing material for the dialog (such as experts, decision-makers, and media), the social characteristics of the participants (such as age and profession), and the way of communicating the data (such as tone of communication, group composition, duration, and geographical scope of the dialog). The perception of the fairness of the practical application of given model-generated data was also an important factor for acceptance.     

The interactions of cetyltrimethylammonium with mitochondria: an uncoupler or a detergent?

The interactions of cetyltrimethylammonium (CTA) with mitochondria have been investigated. We confirm, as already observed in a previous paper, that this compound behaves as proton carrier (or uncoupler) of the oxidative phosphorylation, but evidences suggest that this compound enhances the membrane permeability to many other compounds such as sucrose. We conclude therefore that CTA as a detergent enhances membrane permeability to all ions including protons. Some evidences are also given that the inhibitory effect of CTA on the mitochondrial respiratory chain is a consequence of the swelling induced.     

Environmental pollution of China to foreign investors: detrimental or beneficial?

Environmental Science and Pollution Research - This study investigates the dynamic linkage among foreign direct investment, energy consumption, and environmental pollution of China spanning from...     

Cost–benefit analysis of using sewage sludge as alternative fuel in a cement plant: a case study

Background, aim, and scope  To enforce the implementation of the Kyoto Protocol targets, a number of governmental/international institutions have launched emission trade schemes as an approach to specify CO₂ caps and to regulate the emission trade in recent years. These schemes have been basically applied for large industrial sectors, including energy producers and energy-intensive users. Among them, cement plants are included among the big greenhouse gas (GHG) emitters. The use of waste as secondary fuel in clinker kilns is currently an intensive practice worldwide. However, people living in the vicinity of cement plants, where alternative fuels are being used, are frequently concerned about the potential increase in health risks. In the present study, a cost–benefit analysis was applied after substituting classical fuel for sewage sludge as an alternative fuel in a clinker kiln in Catalonia, Spain. Materials and methods  The economical benefits resulting in the reduction of CO₂ emissions were compared with the changes in human health risks due to exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and carcinogenic metals (As, Cd, Co, and Cr) before and after using sewage sludge to generate 20% of the thermal energy needed for pyro-processing. The exposure to PCDD/Fs and metals through air inhalation, soil ingestion and dermal absorption was calculated according to the environmental levels in soil. The carcinogenic risks were assessed, and the associated cost for the population was estimated by considering the DG Environment’s recommended value for preventing a statistical fatality (VPF). In turn, the amount of CO₂ emitted was calculated, and the economical saving, according to the market prices, was evaluated. Results  The use of sewage sludge as a substitute of conventional energy meant a probability cancer decrease of 4.60 for metals and a cancer risk increase of 0.04 for PCDD/Fs. Overall, a net reduction of 4.56 cancers for one million people can be estimated. The associated economical evaluation due to the decreasing cancer for 60,000 people, the current population living near the cement plant, would be of 0.56 million euros (US$ 0.83 million). In turn, a reduction of 144,000 tons of CO₂ emitted between 2003 and 2006 was estimated. Considering a cost of 20 euros per ton of CO₂, the global saving would be 2.88 million euros (US$ 4.26 million). Discussion  After the partial substitution of the fuel, the current environmental exposure to metals and PCDD/Fs would even mean a potential decrease of health risks for the individuals living in the vicinity of the cement plant. The total benefit of using sewage sludge as an alternative fuel was calculated in 3.44 million euros (US$ 5.09 million). Environmental economics is becoming an interesting research field to convert environmental benefits (i.e., reduction of health risks, emission of pollutants, etc.) into economical value. Conclusions  The results show, that while the use of sewage sludge as secondary fuel is beneficial for the reduction in GHG emissions, no additional health risks for the population derived from PCDD/F and metal emissions are estimated. Recommendations and perspectives  Cost–benefit analysis seems to be a suitable tool to estimate the environmental damage and benefit associated to industrial processes. Therefore, this should become a generalized practice, mainly for those more impacting sectors such as power industries. On the other hand, the extension of the study could vastly be enlarged by taking into account other potentially emitted GHGs, such as CH₄ and N₂O, as well as other carcinogenic and non-carcinogenic micropollutants.     

Black Carbon and Polycyclic Aromatic Hydrocarbon Emissions from Vehicles in the United States–Mexico Border Region: Pilot Study

The investigators developed a system to measure black carbon (BC) and particle-bound polycyclic aromatic hydrocarbon (PAH) emission factors during roadside sampling in four cities along the United States–Mexico border, Calexico/Mexicali and El Paso/Juárez. The measurement system included a photoacoustic analyzer for BC, a photoelectric aerosol sensor for particle-bound PAHs, and a carbon dioxide (CO₂) analyzer. When a vehicle with measurable emissions passed the system probe, corresponding BC, PAH, and CO₂ peaks were evident, and a fuel-based emission factor was estimated. A picture of each vehicle was also recorded with a digital camera. The advantage of this system, compared with other roadside methods, is the direct measurement of particulate matter components and limited interference from roadside dust. The study revealed some interesting trends: Mexican buses and all medium-duty trucks were more frequently identified as high emitters of BC and PAH than heavy-duty trucks or passenger vehicles. In addition, because of the high daily mileage of buses, they are good candidates for additional study. Mexican trucks and buses had higher average emission factors compared with U.S. trucks and buses, but the differences were not statistically significant. Few passenger vehicles had measurable BC and PAH emissions, although the highest emission factor came from an older model passenger vehicle licensed in Baja California.     

The temporal variability of the profile of carcinogenic polycyclic aromatic hydrocarbons in urban air: a study in a medium traffic area in Rome, 1993–1998

The constancy, both temporal and spatial, of the profile of polycyclic aromatic hydrocarbons (PAHs) relative to benzo[a]pyrene (BaP) is a prerequisite to using the BaP-indicator approach in the carcinogenic risk assessment for PAHs. The principal aim of this study was to provide a contribution to validate this approach, by studying the variability of the profile at a typical urban site through a multi-year data set and by comparing the profiles available for different cities. Seven carcinogenic PAHs (benz[a]anthracene, benzo[b+j+k]fluoranthenes, BaP, indeno[1,2,3-cd]pyrene, dibenz[a,h]anthracene) were determined in PM₁₀ 24-h samples collected every third day at a road site; moreover, benzo[e]pyrene was determined as a reference PAH due to its stability. The profile was found stable from year to year. Besides, it was similar to those recently found in other European cities (observed differences within a factor of four) and to those elaborated from earlier (1970s–1980s) investigations. The substantial similarity of profiles, both temporal (on an annual basis) and spatial, supports the validity of the BaP-indicator approach. Large PAH-to-PAH differences were, however, found in the seasonal pattern of profile: they were explained by the different atmospheric degradability of PAHs, whose effect is enhanced under the meteoclimatic conditions typical of the European Mediterranean countries. PAH annual means showed a slight declining trend since 1994. In the last sampling year, mean concentration of BaP was 1.2 ng m⁻³. Within-year differences among monthly averaged PAH concentrations were observed, as large as up to 44-fold for BaP, underlining the need for whole-year monitoring.     

Modeling the dynamics of DDT in a remote tropical floodplain: indications of post-ban use?

Significant knowledge gaps exist regarding the fate and transport of persistent organic pollutants like dichlorodiphenyltrichloroethane (DDT) in tropical environments. In Brazil, indoor residual spraying with DDT to combat malaria and leishmaniasis began in the 1950s and was banned in 1998. Nonetheless, high concentrations of DDT and its metabolites were recently detected in human breast milk in the community of Lake Puruzinho in the Brazilian Amazon. In this work, we couple analysis of soils and sediments from 2005 to 2014 at Puruzinho with a novel dynamic floodplain model to investigate the movement and distribution of DDT and its transformation products (dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD)) and implications for human exposure. The model results are in good agreement with the accumulation pattern observed in the measurements, in which DDT, DDE, and DDD (collectively, DDX) accumulate primarily in upland soils and sediments. However, a significant increase was observed in DDX concentrations in soil samples from 2005 to 2014, coupled with a decrease of DDT/DDE ratios, which do not agree with model results assuming a post-ban regime. These observations strongly suggest recent use. We used the model to investigate possible re-emissions after the ban through two scenarios: one assuming DDT use for IRS and the other assuming use against termites and leishmaniasis. Median DDX concentrations and p,p′-DDT/p,p′-DDE ratios from both of these scenarios agreed with measurements in soils, suggesting that the soil parameterization in our model was appropriate. Measured DDX concentrations in sediments were between the two re-emission scenarios. Therefore, both soil and sediment comparisons suggest re-emissions indeed occurred between 2005 and 2014, but additional measurements would be needed to better understand the actual re-emission patterns. Monte Carlo analysis revealed model predictions for sediments were very sensitive to highly uncertain parameters associated with DDT degradation and partitioning. With this model as a tool for understanding inter-media cycling, additional research to refine these parameters would improve our understanding of DDX fate and transport in tropical sediments.     

The state of ambient air quality in Pakistan—a review

Background and purpose  

Pakistan, during the last decade, has seen an extensive escalation in population growth, urbanization, and industrialization, together with a great increase in motorization and energy use. As a result, a substantial rise has taken place in the types and number of emission sources of various air pollutants. However, due to the lack of air quality management capabilities, the country is suffering from deterioration of air quality. Evidence from various governmental organizations and international bodies has indicated that air pollution is a significant risk to the environment, quality of life, and health of the population. The Government has taken positive steps toward air quality management in the form of the Pakistan Clean Air Program and has recently established a small number of continuous monitoring stations. However, ambient air quality standards have not yet been established. This paper reviews the data being available on the criteria air pollutants: particulate matter (PM), sulfur dioxide, ozone, carbon monoxide, nitrogen dioxide, and lead.