A study of background radioactivity level for Canakkale, Turkey

This study assesses the level of background radiation for Canakkale province of northwestern Turkey. Radon concentrations in indoor air were determined using CR-39 nuclear track detectors and ²²²Rn activity was found to be 167 Bq m^???3 (equivalent to an annual effective dose of 4.2 mSv). Measurements of outdoor gamma radiation (of terrestrial and cosmic origin) in air were performed using plastic scintillators, and the average absorbed gamma dose rate was found to be 66.4 nGy h^???1 (corresponding to an annual effective dose of 81.4 μSv). The radionuclide activity concentrations in soil samples collected from the study area were measured through gamma-ray spectrometry, and the average activities were determined as 94.55, 110.4, and 1,273 Bq kg^???1 for the natural radionuclides ²³⁸U, ²³²Th, and ⁴⁰K, respectively, and 19.39 Bq kg^???1 for the fission product ¹³⁷Cs. The natural radioactivity sources resulted in an annual effective dose of 184 μSv. The radioactivity levels of drinking water samples were measured as 0.0599 Bq l^???1 for gross-alpha activity and 0.0841 Bq l^???1 for gross-beta activity using a low-background counting technique (equivalent to an annual effective dose of 12.25 μSv). The results of this study show that the activity levels of radon in air, radionuclides in soil, and alpha activities in drinking water are higher compared to the data available for other Turkish cities and the world averages. On the other hand, the outdoor gamma dose rates in air and beta activities in drinking water are within natural limits.     

贵阳室内氡时空分布特征研究

为了全面分析室内氡的时空分布特征、来源和影响因素,选择了贵阳市不同地理位置的居民住宅、办公场所和公共场所,进行了为期一年的室内氡监测。贵阳市室内氡的平均浓度为(72.7±1.6)Bq/m3,低于室内空气污染国家标准,达标率98.5%。其中居民住宅、办公场所和公共场所的室内氡浓度分别为(93.46±86.93)、(74.68±40.74)、(61±26.93)Bq/m3。研究表明,室内涂料、装修程度和通风效果、小区环境等对室内氡浓度高低有显著影响,室内氡也随季节变化而发生波动。对于居民住宅和公共场所氡的室内外来源相对重要性不同。居民住宅内新楼和旧楼不同楼层室内氡的来源、影响因素和分布特征有显著差异。     

Radon (thoron) daughter measurements with an automated,programmable, radiation monitor

A technical evaluation of an automated, programmable, grab-sampler manufactured by Pylon Electronic Development under the commercial name WL-1000C has been conducted. Six different methods are implemented in the instrument for analyzing radiation data. Any one method can be used on command and easily selected by means of a keyboard. Available radiation data that can be retrieved on command include radon (thoron) daughter concentrations and radon (thoron) Working Levels. Measurements were carried out under laboratory-controlled conditions in a large (26 m³) radon/thoron test facility, designed for calibration purposes, and at an underground uranium mine. Data obtained with the WL-1000C have been compared with conventional grab-sampling (e.g., Kusnetz, Thomas-Tsivoglou and Markov methods) and with other automated radiation instrumentation previously tested at our laboratories. Tests were done under constant radiation conditions and also under rapidly fluctuating conditions in order to determine the response of the instruments and methods in these two cases of practial interest. The Working Level used in these experiments was in the approximate range of 0.01 to 10 WL. Tests were conducted under a variety of environmental conditions. Good agreement with grab-sampling data was found for radon daughters. Some discrepancies with grab-sampling data were found for radon daughter/thoron daughter mixtures. Disagreement in the latter case is to be expected because of -energy overlap between RaA and ThC.     

Assessment of environmental radioactivity for Batman, Turkey

The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) and a fission product (¹³⁷Cs) were 35 ± 8, 25 ± 10, 274 ± 167 and 12 ± 7 Bq kg^???1, respectively, in the soil samples. The concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the selected building materials ranged from 18 to 48 Bq kg^???1, 8 to 49 Bq kg^???1 and 68 to 477 Bq kg^???1, respectively. All the calculated radium equivalent (Ra_eq) activity values of the building material samples are lower than the limit of 370 Bq kg^???1, equivalent to a γ-dose of 1.5 mSv year^???1. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in tap waters collected from the study area were determined with mean specific activity concentrations of 42 ± 15, 35 ± 9 and 524 ± 190 mBq L^???1, respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m^???3. The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m^???3 with a standard deviation value of 23 Bq m^???3. The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.     

Aircraft mass budgeting to measure CO2 emissions of Rome,Italy

Aircraft measurements were used to estimate the CO₂ emission rates of the city of Rome, assessed against high-resolution inventorial data. Three experimental flights were made, composed of vertical soundings to measure Planetary Boundary Layer (PBL) properties, and circular horizontal transects at various altitudes around the city area. City level emissions and associated uncertainties were computed by means of mass budgeting techniques, obtaining a positive net CO₂ flux of 14.7?±?4.5, 2.5?±?1.2, and 10.3?±?1.2 μmol m^?2 s^?1 for the three flights. Inventorial CO₂ fluxes at the time of flights were computed by means of spatial and temporal disaggregation of the gross emission inventory, at 10.9?±?2.5, 9.6?±?1.3, and 17.4?±?9.6 μmol m^?2 s^?1. The largest differences between the two dataset are associated with a greater variability of wind speed and direction in the boundary layer during measurements. Uncertainty partitioned into components related to horizontal boundary flows and top surface flow, revealed that the latter dominates total uncertainty in the presence of a wide variability of CO₂ concentration in the free troposphere (up to 7 ppm), while it is a minor term with uniform tropospheric concentrations in the study area (within 2 ppm). Overall, we demonstrate how small aircraft may provide city level emission measurements that may integrate and validate emission inventories. Optimal atmospheric conditions and measurement strategies for the deployment of aircraft experimental flights are finally discussed.     

Particulate matter levels in a South American megacity: the metropolitan area of Lima-Callao,Peru

The temporal and spatial trends in the variability of PM₁₀ and PM_2.5 from 2010 to 2015 in the metropolitan area of Lima-Callao, Peru, are studied and interpreted in this work. The mean annual concentrations of PM₁₀ and PM_2.5 have ranges (averages) of 133–45 μg m^?3 (84 μg m^?3) and 35–16 μg m^?3 (26 μg m^?3) for the monitoring sites under study. In general, the highest annual concentrations are observed in the eastern part of the city, which is a result of the pattern of persistent local winds entering from the coast in a south-southwest direction. Seasonal fluctuations in the particulate matter (PM) concentrations are observed; these can be explained by subsidence thermal inversion. There is also a daytime pattern that corresponds to the peak traffic of a total of 9 million trips a day. The PM_2.5 value is approximately 40% of the PM₁₀ value. This proportion can be explained by PM₁₀ re-suspension due to weather conditions. The long-term trends based on the Theil-Sen estimator reveal decreasing PM₁₀ concentrations on the order of ?4.3 and ?5.3% year^?1 at two stations. For the other stations, no significant trend is observed. The metropolitan area of Lima-Callao is ranked 12th and 16th in terms of PM₁₀ and PM_2.5, respectively, out of 39 megacities. The annual World Health Organization thresholds and national air quality standards are exceeded. A large fraction of the Lima population is exposed to PM concentrations that exceed protection thresholds. Hence, the development of pollution control and reduction measures is paramount.     

Aerial and terrestrial-based monitoring of channel erosion,headcutting, and sinuosity

Headcuts are points of accelerated channel erosion that frequently have ecological consequences. A particularly large and dynamic headcut in southwest Wyoming has affected natural and anthropogenic resources for decades. To better understand and address this issue, we undertook a review of the headcut’s upstream retreat, followed by photogrammetric monitoring of the present condition for erosion monitoring. Aerial photography shows the Bitter Creek headcut retreated >?200 m upstream in 68 years (1948–2016) at ~?1.4 m year^?1. Following installation of a concrete slab structure in the mid-1970s, headcut retreat slowed to ~?0.5 m year^?1. Channel sinuosity downstream of the headcut is greater than upstream, which we attribute to the presence of the headcut, given that there are no major changes in valley geometry, geology, or soils through this reach. Both aerial and terrestrial-based image platforms were used to collect stereo imagery and create 3D photogrammetric models of the headcut in 2016. From these two models, we measured soil loss downstream of the headcut at ~?126 m³ m^?1 valley length. Since 1954, soil loss within the channel has been ~?98 m³ year^?1 or ~871 t ha^?1 year^?1since then. Models created from aerial- and terrestrial-based images differed in volumetric estimates by 2%, indicating that either method could be used for this type of monitoring. The ground-based imagery model showed more detail, especially on vertical and overhanging surfaces, while the aerial imagery model produced a more realistic orthomosaic and efficiently covered a larger area. Ground-based image acquisition took longer and was more costly per unit area, but is an efficient method for small project areas, or areas where aerial imagery cannot be safely or practically acquired. Historical imagery and photogrammetric modeling proved very useful in elucidating stream dynamics associated with this large, dynamic headcut.     

Monitoring of Aerial Pollutants Emitted from Swine Houses in Korea

This on-site survey study was performed to determine the concentrations and emissions of aerial contaminants in the different types of swine houses in Korea and then to present beneficial information available for Korean pig producers to manage optimal air quality in swine house. The swine houses investigated in this research were selected based on three criteria; manure removal system, ventilation mode and growth stage of swine. Mean concentrations of aerial pollutants in swine houses were 8 ppm for ammonia, 300 ppb for hydrogen sulfide, 2 mg m⁻³ for total dust, 0.6 mg m⁻³ for respirable dust, 4 log(cfu m⁻³) for total airborne bacteria and 3 log(cfu m⁻³) for total airborne fungi, respectively. Mean emissions based on pig (liveweight; 75 kg) and area (m²) were 250 and 340 mg h⁻¹ for ammonia, 40 and 50 mg h⁻¹ for hydrogen sulfide, 40 and 50 mg h⁻¹ for total dust, 10 and 15 mg h⁻¹ for respirable dust, 1.0 and 1.3 log(cfu) h⁻¹ for total airborne bacteria and 0.7 and 1.0 log(cfu) h⁻¹ for total airborne fungi, respectively. In general concentrations and emissions of gases were relatively higher in the swine houses managed with deep-pit manure system with slats and mechanical ventilation mode than the different swine housing types whereas those of particulates and bioaerosol were highest in the naturally ventilated swine houses with deep-litter bed system.     

Assessment of the radiological impacts of utilizing coal combustion fly ash as main constituent in the production of cement

The purpose of this study is to assess potential radiological impacts of utilizing pulverized fly ash (PFA) as a constituent in ordinary Portland cement. For this purpose, the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in samples of PFA and Portland cement containing 15%, 20%, and 25% by mass PFA were measured using gamma-ray spectrometry with HPGe detector. The mean activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were found as 366.6, 113.7, and 460.2 Bq kg^???1, 94.2, 25.9, and 215.3 Bq kg^???1, 113.7, 34.3, and 238.3 Bq kg^???1, and 124.2, 41.8, and 279.3 Bq kg^???1 for the examined samples of PFA, Portland cement with 15%, 20%, and 25% by mass PFA, respectively. Radiological parameters such as radium equivalent activity, external exposure index (activity concentration index), internal dose index (alpha index), indoor absorbed gamma dose rate, and the corresponding the annually effective dose were assessed for Portland cement samples containing three percentages (15%, 20%, and 25%) by mass PFA. The results of assessment show that all Portland cement samples are within the safe limits recommended for building materials for dwellings.     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

PAHs in PM2.5 in Zhengzhou: concentration,carcinogenic risk analysis,and source apportionment

Ambient air samples were collected at two different locations between 2011 and 2012 in Zhengzhou, China in order to assess the concentration level, health risks, as well as the sources of polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM_2.5). The mean annual levels of PM_2.5 observed at industry site and residential site were 172?±?121 and 160?±?72 μg m^?3, respectively, which were about five times the annual value of proposed PM_2.5 standard (35 μg m^?3) in China. The PM_2.5 in all daily samples (n?=?47) exceeds the proposed PM_2.5 standard in China (75 μg m^?3) at both industrial and residential sites. Seasonal variations of PM_2.5 showed a clear trend of winter?>?autumn?>?spring?>?summer at both sites. The total concentrations of 16 PM_2.5-associated PAHs ranged from 61?±?51 to 431?±?281 and 38?±?25 to 254?±?189 ng m^?3, with mean value of 176?±?233 and 111?±?146 ng m^?3 at industry and residential sites, respectively. The major species were fluoranthene, pyrene, chrysene, benzo[b]fluoranthene and benzo[k]fluoranthene, and the concentration levels of PAHs in PM_2.5 were higher in winter than those of other seasons at both sites. The annual mean values of toxicity equivalency concentrations of ∑₁₆PAHs in PM_2.5 were 22.8 and 13.5 ng m^?3 in industry and residential area, respectively. In this study, the risk level of adult citizens through inhalation exposure to PAHs was calculated. The average estimates of lifetime inhalation cancer risks were approximately 8.9?×?10^?7 and 6.3?×?10^?7 for industry and residential sites, respectively. The main sources of 16 PAHs from both diagnostic ratios and principle component analysis identified as vehicular emissions and coal combustion.     

Application of zirconium–iridium permanent modifier for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry

A novel and robust method for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry was developed, using zirconium–iridium coating as permanent modifier (140 μg Zr and 4 μg Ir). After 300 atomization cycles, it was necessary to add 2 μg of Ir. Due to the varying concentrations of Pb in atmospheric particulate matter, lead was monitored at two wavelengths, at the less sensitive line of 261.4 nm for high concentration samples (>20 μg?L^?1) or at 283.3 nm for the low concentration samples. Matrix-matched calibration had to be performed for quantitative recoveries (96–102 %). Following this approach, the four elements were determined in atmospheric particulate matter samples from an industrial area near the city of Athens in two different time periods (cold–warm) with limits of detection of 5.5 ng?m^?3 for Pb at 261.4 nm and 0.29 ng?m^?3 at 283.3 nm, 0.019 ng?m^?3 for Cd, 0.14 ng?m^?3 for As, and 0.22 ng?m^?3 for Ni. Lead, Cd, and As levels were very low, whereas Ni content was at comparable levels with other areas worldwide.     

Residues and ecological risks of organochlorine pesticides in Lake Small Baiyangdian, North China

The levels of hexachlorocyclohexane (HCH) and dichloro-diphenyl-trichloroethane (DDT) in the water, suspended particulate matter (SPM), and sediments from Lake Small Baiyangdian were measured by gas chromatograph with a ⁶³Ni microelectron capture detector. The residual levels of the total HCHs in the water, SPM, and sediments were 1.59?±?2.24 ng L^?1, 25.42?±?1.72 ng g^?1 dw (dry weight), and 0.86?±?1.44 ng g^?1 dw, respectively. DDTs were not detected in the water samples. The concentrations of total DDTs were 158.79?±?1.67 ng g^?1 dw in SPM and 0.46?±?1.97 ng g^?1 dw in the sediments. Compared to other areas in China and abroad, the levels of residual HCH and DDT were relatively low in the water and sediments, but they were moderate to high in the SPM. Organic carbon partition coefficient values for HCH in this study were higher than previously published values and may reflect new input in this area. The residual HCHs in this area could be derived from a mixture of technical HCH and lindane because ongoing lindane use may be occurring. DDT in the majority of the study area was primarily attributed to historical discharge, but some regions may be receiving new input. The ecological risks of γ-HCH in the water were very low according to species sensitivity distribution models. The concentrations of HCH and DDT in the sediments from the study area did not exceed the sediment quality guidelines, which indicate little risk for benthic organisms.     

Dielectric properties of MSWI bottom ash for non-invasive monitoring of moisture

The dielectric procperties of MSWI bottom ash as a function of volumetric water content (VWC) are reported in this paper. The objective was to aid the development of microwave based non-invasive emission monitoring and control system for various bottom ash applications. The dielectric measurements were made, on a 1.5-year-old bottom ash, with an electrical network analyzer in microwave range (300 MHz–1.5 GHz). The VWC of the samples ranged between 0.05 and 0.40 m³?m^?3. The relationship between the dielectric permittivity and the VWC was modeled with an empirical model and a physically based Birchak model (BM). The results showed that a linear relationship existed between the permittivity and the VWC at higher water contents (>0.25 m³?m^?3). However, at lower water contents (<0.25 m³?m^?3), the relationship between the permittivity and the WVC was affected by the composition of the bottom ash. The permittivity measurement, with the current method, was not affected by high salt concentrations (10 and 20 dS/m). The empirical model, as compared to BM, provided the best fit between the actual and the predicted water content. The root mean square error (RMSE) values were 0.008–0.010 and 0.06–0.09 m³?m^?3 for the empirical and the Birchak model, respectively.     

Assessment of nitrogen and phosphate balance and the roles of bacteria and viruses at the water-sediment interface in the Allal El Fassi reservoir (Morocco)

Balances of nitrogen and phosphate were studied in the Allal El Fassi reservoir (Morocco); the results showing that nitrogen input (296 mg m^?2 d^?1) was 161 % higher than output (183 mg m^?2 d^?1). Phosphate input (35.65 mg m^?2 d^?1) was 865 % higher than output (4.12 mg m^?2 d^?1), causing a progressive increase in the internal phosphate stock. Sedimentation flux was equally high (53.80 and 18 mg m^?2 d^?1) for both nitrogen and phosphate input, mainly from the Sebou River and in particulate form which immediately settles upon arrival in the reservoir. The release of nitrogen and phosphate from the sediment (5.40 and 1.15 mg m^?2 d^?1, respectively) depended on physicochemical and biological (bacteria and viruses) variability and the calcareous nature of the catchment basin. Calcium-bound phosphate prevailed in the reservoir. Drastic control of phosphate input is suggested to avoid accumulation of calcium-bound phosphate which may dissociate and thereby contribute to eutrophication.     

Exposure assessment in Beijing, China: biological agents, ultrafine particles, and lead

In this study, air samples were taken using a BioSampler and gelatin filters from six sites in Beijing: office, hospital, student dormitory, train station, subway, and a commercial street. Dust samples were also collected using a surface sampler from the same environments. Limulus amoebocyte lysate (LAL) and Glucatell assays were used to quantify sample endotoxin and (1,3)- ${\rm{\beta}} $ -d-glucan concentration levels, respectively. Enzyme-linked immunosorbent assay (ELISA) was used to measure the dust mite allergens (Der p 1 and Der f 1). Ultrafine particle and lead concentrations in these sampling sites were also measured using P-Trak and atomic absorption spectrometer, respectively. Analysis of variance (ANOVA) and linear regression analysis were used to analyze the concentration data. Higher culturable bacteria (12,639 CFU/m³) and fungi (1,806 CFU/m³) concentrations were observed for the train station and the subway system, respectively. For the rest of sampling sites, their concentrations were comparable to those found in western countries, ranging from 990 to 2,276 CFU/m³ for bacteria, and from 119 to 269 CFU/m³ for fungi. ANOVA analysis indicated that there were statistically significant differences between the culturable bacterial and fungal concentration levels obtained for different sites (p value = 0.0001 and 0.0047). As for dust allergens, endotoxin, and (1,3)-β -d-glucan, their concentrations also seemed to be comparable to those found in the developed countries. Airborne allergen concentrations ranged from 16 to 68 ng/m³. The dust-borne allergen concentration was observed to range from 0.063 to 0.327 ng/mg. As for endotoxin, the highest airborne concentration of 25.24 ng/m³ was observed for the commercial street, and others ranged from 0.0427 to 0.1259 ng/m³. And dust-borne endotoxin concentration ranged from 58.83 to 6,427.4 ng/mg. For (1,3)-β -d-glucan, the airborne concentration ranged from 0.02 to 1.2 ng/m³. Linear regression analyses showed that there existed poor correlations between those in airborne and dust-borne states (R²?=?0.002~0.43). In our study, the lowest ultrafine particle concentration about 5,203 pt/cm³ was observed in office and the highest was observed at the train station, up to 32,783 pt/cm³. Lead concentration was shown to range from 80 to 170 ng/mg with the highest also observed at the train station. The information provided in this work can be used to learn the general situation of relevant health risks in Beijing. And the results here suggested that when characterizing exposure both airborne and dust-borne as well as the environments should be considered.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Assessment of natural radiation exposure levels and mass attenuation coefficients of lime and gypsum samples used in Turkey

The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in lime and gypsum samples used as building materials in Turkey were measured using gamma spectrometry. The mean activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were found to be 38 ± 16, 20 ± 9, and 156 ± 54 Bq kg^???1 for lime and found to be 17 ± 6, 13 ± 5, and 429 ± 24 Bq kg^???1 for gypsum, respectively. The radiological hazards due to the natural radioactivity in the samples were inferred from calculations of radium equivalent activities (Ra_eq), indoor absorbed dose rate in the air, the annual effective dose, and gamma and alpha indices. These radiological parameters were evaluated and compared with the internationally recommended limits. The experimental mass attenuation coefficients (μ/ρ) of the samples were determined in the energy range 81–1,332 keV. The experimental mass attenuation coefficients were compared with theoretical values obtained using XCOM. It is found that the calculated values and the experimental results are in good agreement.     

Seasonal evaluation of bioaerosols from indoor air of residential apartments within the metropolitan area in South Korea

The aims of the present study were to determine the levels of bioaerosols including airborne culturable bacteria (total suspended bacteria, Gram-positive bacteria, Staphylococcus, Staphylococcus aureus, methicillin-resistant S. aureus (MRSA), and Gram-negative bacteria), fungi, endotoxin, and viruses (influenza A, influenza B, respiratory syncytial virus types A/B, parainfluenza virus types 1/2/3, metapnemovirus, and adenovirus) and their seasonal variations in indoor air of residential apartments. Of the total suspended bacteria cultured in an indoor environment, Staphylococcus was dominant and occupied 49.0 to 61.3 % of indoor air. Among Staphylococcus, S. aureus were detected in 100 % of households' indoor air ranging from 4 to 140 CFU/m³, and 66 % of households were positive for MRSA ranging from 2 to 80 CFU/m³. Staphylococcus and S. aureus concentrations correlated with indoor temperature (adjusted β: 0.4440 and 0.403, p?<?0.0001). Among respiratory viruses, adenovirus was detected in 14 (14 %) samples and influenza A virus was detected in 3 (3 %) samples regarding the indoor air of apartments. Adenovirus concentrations were generally higher in winter (mean concentration was 2,106 copies/m³) than in spring (mean concentration was 173 copies/m³), with concentrations ranging between 12 and 560 copies/m³. Also, a strong negative correlation between adenovirus concentrations and relative humidity in indoor air was observed (r?=??0.808, p?<?0.01). Furthermore, temperature also negatively correlated with adenovirus concentrations (r?=??0.559, p?<?0.05).