一种新型四齿1,2-HOPO螯合剂的合成、金属配位研究

以6-羟基-2-吡啶羧酸为原料,经5步反应合成得到一种新型四齿β-二酮1,2-羟基吡啶酮衍生物。通过红外、核磁、质谱对其结构进行了表征。采用电位-光谱结合的方法,测定了四齿β-二酮1,2-羟基吡啶酮衍生物与UO2+2、Cu~(2+)、Zn~(2+)和Fe~(3+)的络合能力。结果表明,四齿β-二酮1,2-羟基吡啶酮衍生物对UO2+2和Fe3+有明显的络合能力,有望成为一种新型铀酰离子促排剂(p UO2=15.4)和铁螯合剂(p Fe=21.22)。     

丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯的合成与螯合性能研究

用2,3-二羟基苯甲酸经羟基保护、酰胺化、酯化和去保护4步反应,生成一种新型的四齿丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体.采用傅里叶变换红外光谱(FT-IR)、紫外-可见光谱(UV-Vis)、核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)和质谱(MS)对其结构进行了表征.在中性pH值条件下,研究了这种配体对铀酰离子的络合能力.结果表明,丙二酸二(2-(2,3-二羟基苯甲酰胺)乙基)酯配体与铀酰离子的螯合常数为23.2.     

新型双功能螯合剂研究——富勒烯基邻苯二酚类螯合物的分子设计

近年来核事故的频发引起人们对核辐射与防护的关注,治疗锕系核素中毒的主要方法是使用络合剂将之排除,邻苯二酚由于其特殊的结构特点、高度的选择性络合能力以及显著的生理活性,成为促排领域的一大研究热点.对目前邻苯二酚类锕系核素螯合促排药物的研究进展进行了简述.基于富勒烯及其衍生物表现出的优良抗氧化性和吸收自由基能力以及邻苯二酚特殊的螯合能力,提出富勒烯基邻苯二酚类新型双功能锕系核素螯合药物.根据富勒烯的化学修饰改性原理和邻苯二酚的分子结构特点,初步设计了富勒烯基邻苯二酚新型螯合物的分子结构,并对所设计分子结构的合理性及合成的可行性进行了分析讨论.     

β-环糊精对四氯联苯胺的包合作用

制备以β-环糊精(β- CD)为主体,2,2′,5,5′-四氯联苯胺(TCB)为客体的固态包合物,通过核磁共振氢谱(1H NMR)和红外光谱( FT -IR)分析了包合物的形成.利用紫外吸收光谱研究了β- CD及其衍生物羧甲基-β-环糊精(CMBCD)对TCB的包合行为,并用Job法和Benesi- Hildebrand双倒数法分别获得β- CD及CMBCD与TCB之间的包合比和包合常数.结果表明,β-CD和CMBCD均可与TCB形成包合比为1∶1的包合物,包合常数分别为727.9 L·mol -1和1 647L·mol -1,且经羧甲基修饰之后的β-环糊精对TCB的包合能力明显优于β-环糊精.     

两种双缩氨基硫脲衍生物主体的合成及对F-的选择性识别

用简便方法设计合成了两种双臂的双缩氨基硫脲衍生物(L1和L2)作为阴离子比色法检测用的探针主体,并得到L2的单晶结构.结果发现,阴离子对主体L1的滴定过程中,紫外-可见吸收光谱有明显变化,表明L1可以通过溶液颜色的变化选择性识别F-.L1与F-的作用是形成氢键并伴随一个脱氢过程.     

耐高浓度苯酚菌株的筛选及其降解特性研究

通过液体富集培养,平板培养分离法从焦化废水的污泥中分离出1株可耐受2 000 mg/L苯酚的菌株,经16S rDNA序列分析,鉴定为施氏假单胞菌(Pseudomonas stutzeri).该菌能以苯酚为唯一碳源和能源生长.通过摇瓶试验和高效液相色谱( HPLC)分析法可知,在pH=7.5,温度为30℃的条件下,苯酚质量浓度在50～400 mg/L时,该菌细胞生长和对苯酚的降解转换快速同步进行.当苯酚质量浓度在800～900 mg/L,菌细胞依次出现快速生长、延缓生长、次快速生长3个生长时期,在前两时期内苯酚降解率低于5％,在次快速生长期内苯酚降解率从低于5％快速增加到100％.气相色谱-质谱联用仪(Gc-MS)测定结果表明,该菌可将苯酚转化成4-羟基-2-氧代戊酸、邻苯二酚、对苯二酚、3,4-二羟基苯甲酸和对羟基苯甲酸等中间产物.     

饮用水中微囊藻毒素臭氧降解效能及影响因素研究

对臭氧氧化去除饮用水中微囊藻毒素RR及LR的降解效能、反应动力学进行了试验研究,讨论了藻毒素初始质量浓度、pH值、羟基自由基(·OH)抑制剂(HCO-3)、溶解性有机碳(DOC)质量浓度对降解的影响.结果表明:整个降解过程符合一级动力学反应方程,降解速率常数与藻毒素初始质量浓度无关;pH值的升高、HCO-3和DOC的存在都会降低藻毒素的降解效率.在液相臭氧质量浓度为8.20 mg·L-1,pH=7.0,温度为(25±1) ℃,反应时间30 min的条件下,MC-RR降解速率常数k=7.80×102 min-1,去除率达90.0%;MC-LR降解速率常数k=1.06×101 min-1,去除率达96.3%.     

杯[6]芳烃羟肟衍生物对重金属离子的萃取性能

以对叔丁基苯酚为原料合成杯[6]芳烃,再以杯[6]芳烃为母体,通过化学修饰合成得到杯[6]芳烃羟肟衍生物,采用IR对其结构性能进行了表征,并考察了溶液初始pH值、萃取时间、温度等因素对杯[6]芳烃羟肟衍生物萃取重金属离子(Pb2+、Ni2+、Cu2+、Mn2+)性能的影响.结果表明,在25℃、pH=5.0、萃取时间为20 min的条件下,杯[6]芳烃羟肟衍生物对各重金属离子的萃取率均达到88％以上,最高萃取率达到96.3％.与杯[6]芳烃相比,杯[6]芳烃羟肟衍生物对重金属离子的萃取率提高了50％以上.     

8-羟基喹啉功能化树脂HQDK-110对Hg2+的吸附性能

8-羟基喹啉对金属离子具有良好的络合性能。研究了一种8-羟基喹啉接枝DK-110的螯合型离子交换树脂HQDK-110对Hg~(2+)的吸附性能,并与DK-110树脂进行比较。考察了不同吸附时间、Hg~(2+)浓度、温度和pH值条件下两种树脂对Hg~(2+)的吸附性能和去除性能。结果表明,HQDK-110和DK-110树脂对Hg~(2+)的适宜吸附p H值为4.5左右。25℃时,HQDK-110和DK-110树脂对Hg~(2+)的吸附容量分别为2.496 mmol/g和2.290 mmol/g。HQDK-110和DK-110对Hg~(2+)的吸附过程更接近于一级动力学方程,其一级吸附动力学常数k1分别为0.009 4 min-1和0.011 8 min-1。吸附过程符合Langmuir等温吸附方程。研究表明,HQDK-110对Hg~(2+)的吸附量和去除率优于DK-110,且树脂的稳定性优于DK-110,湿态树脂比干态树脂具有更好的重复使用性能。     

精噁唑禾草灵水解的影响因素及降解途径研究

研究了精噁唑禾草灵(FE)在不同乙腈体积分数的缓冲液中,不同温度和pH值条件下的水解动力学.结果表明,FE在不同条件下的水解均符合一级动力学.随着乙腈体积分数降低和温度升高,FE水解速率加快;FE在pH = 6.0时水解速率最小,pH值增大或减小,水解速率均变大.建立了温度和pH值与速率常数的回归方程式,该方程能够用于预测FE在缓冲溶液中的水解半减期.气相色谱-质谱分析表明,在pH值为3～7的条件下,FE发生了唑基-氧-苯基醚键的断裂,生成了2-(4-羟基苯氧基)丙酸乙酯和6-氯苯并唑酮.     

油浸变压器排油注氮装置在500kV变电站的设计与应用

在分析500kV变电站主变压器消防系统的现状,比较3类消防系统优缺点的基础上,详细论述了主变排油注氮装置的结构组成、工作原理、参数计算、控制系统设计以及需要注意的事项等,为下一步排油注氮装置的推广应用打下基础.     

HAZOP结合What-if方法在某延迟焦化装置除焦中的应用

为克服传统危险与可操作性（HAZOP）定性分析方法在复杂操作、间歇作业等过程中使用的局限性,提出在传统HAZOP定性分析方法的基础上结合What-if（故障假设）方法,对人的不安全行为和操作规程不完备所导致的风险后果分析作出补充。详细说明其技术原理、工作流程等使用细节,系统阐述该方法与传统HAZOP定性分析方法的区别,并在某延迟焦化装置的除焦操作的风险分析中应用。经分析,识别出在“给水-泡焦”节点,有“操作规程错误”场景2项,“操作规程不具体”场景1项,不存在“操作人员未按操作规程执行”场景。研究结果表明:本文方法有效且具有较好效果,可以广泛应用于操作规程/作业指导书审查、作业过程隐患排查等方面,帮助企业开展操作层面的风险识别与管理,提升企业的生产安全水平。     

Nighttime pedestrian fatalities: A comprehensive examination of infrastructure,user, vehicle,and situational factors

Introduction: Pedestrian fatalities in the United States increased 45.5% between 2009 and 2017. More than 85% of those additional pedestrian fatalities occurred at night. Method: We examine Fatality Analysis Reporting System (FARS) data for fatal pedestrian crashes that occurred in the dark between 2002 and 2017. Within-variable and before/after examinations of crashes in terms of infrastructure, user, vehicle, and situational characteristics are performed with one-way analysis of variance (ANOVA) and two-sample t-tests. We model changes in crash characteristic proportions between 2002–2009 and 2010–2017 using linear regressions and test for autocorrelation with Breusch-Godfrey tests. Results: The increase in fatal nighttime pedestrian crashes is most strongly correlated with infrastructure factors: non-intersection unmarked locations (saw 80.8% of additional fatalities); 40–45 mph roads (54.6%); five-lane roads (40.7%); urban (99.7%); and arterials (81.1%). In addition, SUVs were involved in 39.7% of additional fatalities, overrepresenting their share of the fleet. Increased pedestrian alcohol and drug involvement warrant further investigation. The age of pedestrians killed increased more (18.1%) than the national average (3.2%). Conclusions: By identifying factors related to the increase in nighttime pedestrian fatalities, this work constitutes a vital first step in making our streets safer for pedestrians. Practical Applications: More research is needed to understand the efficacy of different solutions, but this paper provides guidance for such future research. Engineering solutions such as road diets or traffic calming may be used to improve identified infrastructure issues by reducing vehicle speeds and road widths. Rethinking vehicle design, especially high front profiles, may improve vehicle issues. However, the problems giving rise to these pedestrian fatalities are likely a result of not only engineering issues but also interrelated social and political factors. Solutions may be correspondingly comprehensive, employing non-linear, systems-based approaches such as Safe Systems.     

森林地表火蔓延模拟方法及其计算机实现

进行了森林火蔓延的研究,对传统的经验公式和模型进行改进,明显发现改进的模型有更好的结果,用计算机巧妙准确地实现了模拟模型,在风力不是特别大,地形变化不是特别剧烈时,该模型有较高精度;并结合火蔓延的主要因素（气象因子、气候、地形等）,进行系统分析,写出算地,编制实现地表火蔓延的预测预报计算机系统软件。这对于有效的组织扑救、减少火灾损失、计算森林火灾的损失评估有重要意义。     

潞安矿区煤层渗透率的各向异性特征实验研究

为了研究原位煤体渗透性的各向异性特征,以山西潞安常村矿3号煤层圆柱试样为对象,利用TCQT-Ⅲ型低渗煤层气相驱替增产试验装置,对煤样进行加载,并以氮气注入压力2.0 MPa的条件下,分析垂直层理和平行层理2个方向的煤体变形和渗透率变化特征。实验结果表明:煤样在加载过程中,平行和垂直层理煤样渗透率均随着有效应力的增大而减小,平行层理方向的渗透率始终大于垂直层理方向,应力加载初期渗透率急剧下降,最后逐渐趋于平缓;径向应变的增加量与渗透率呈正相关性,且平行层理相关性大于垂直层理;沿平行层理方向的裂隙度大于沿垂直层理方向,沿垂直层理方向的应变量大于沿平行层理方向;应变增加量均随有效应力的增加而逐渐减小。研究结果可为煤层井网布置及优化提供参考。     

Footedness and Mounting—Short Review and Two Case Studies

Footedness is a personal quality like handedness. Footedness may be associated with moving ability during mounting, dismounting, and jumping movements. Occupational accidents have occurred during movement at different working levels, during the use of access and exit systems, and during the mounting of vehicles. Aging can also affect accident risk and body laterality. For example, falling accidents on stairs are common among the elderly. One reason for accidents may be that the structure of the access system or stair system is unsuitable for individual moving patterns depending partly on body laterality. Footedness and the way the feet are used may be contradictory to the demands of the moving situation, especially during uncommon or rapid situations. This contradiction may trigger disturbance during moving. The aims of this pilot study were (a) to review the literature briefly and (b) to describe the use of the dominant and nondominant foot by farmers and the elderly when mounting a tractor and stairs, respectively. The study also gives ideas for future studies based on both (a) and (b).     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

一起有机过氧化物爆炸事故的调查和分析

阐述一起重大爆炸伤亡事故的现场调查和原因分析，介绍如何通过人证物证材料，用鱼刺图法找出可能引起事故的诸原因，逐项加以分析，将与人证或物证材料相矛盾的原因子以排除，最后剩下无法排除亦即能与人证物证相符的那个原因，就是事故的真正原因。笔者是这起事故调查专家组组长，取证和数据可靠。     

Debunking the false dichotomy of leadership idealism and pragmatism: Critical evaluation and support of newer genre leadership theories

Leadership theories have shifted over the last few decades from a focus on managerial functions and economic leader–follower exchanges toward greater focus on the interpersonal dynamics occurring within the leadership process. Theories such as transformational, ethical, authentic, and other “newer genre” theories were created to address neglected topics such as leader vision and inspirational messages, transparency, emotional effects, morality, individualized attention, and intellectual stimulation. Critiques of these theories, however, have been raised. In this paper, we address five of those critiques and argue for the validity and practical effectiveness of the new genre theories. Further, we describe how newer genre leadership research should be viewed as a performative epistemology, entailing a process of co‐creation involving scholars and practitioners. Finally, from this view, we provide general ideas for leader development. Copyright © 2014 John Wiley & Sons, Ltd.     

Occupational Safety and Health in Finland

In Finland, occupational safety is the responsibility of the employer, while the occupational safety and health laws are enforced by the Labour Inspection Service, an organization of the state. The Labour Inspection is divided in 11 administrative districts, and it employs 360 professionals. They are mandated to carry out site visits without prearranged appointments to inspect safe work situations, working hours, construction safety, or any aspect of accident risks. The inspectors are also mandated to verify the existence of sufficient occupational health services as prescribed by the Occupational Health Services Act for all employees. The occupational health services are typically provided by enterprise-owned medical departments, by mutually owned health care centers, by private practitioners, or by municipal health care centers. The latter are required by law to provide all services as prescribed by the legislation to anyone who comes to the facility. This situation is prevalent in the countryside, where there are very few private caregiving centers. Declaring occupational accidents and disease cases is mandatory, and the Inspection districts examine all accidents to establish causes and consequences, and to initiate prosecution in case of criminal negligence. Labour Inspection Districts are also notified of the new occupational disease cases as they are declared to insurance companies. Insurance for occupational disease, accidents, and death is an obligation of the employer, although they can choose the insurance company. The medical confidentiality between the workers and their occupational health care providers is very strict. Official statistics are maintained by the state Statistics Finland organization, and they may be used, for example, for research purposes by scientific institutes like the Finnish Institute of Occupational Health. Construction industry accounts for 25% of all fatal accidents (120 cases per 1 million working hours), followed by mechanical, wood, metal, machinery, and pulp and paper industry (10% each of fatal accidents) with rates ranging from 100–160 cases per 1 million working hours. There are some 5,000 occupational disease cases per year (rate 22/10,000 employed). The major disease categories include repetitive strain injuries (1,300 cases), respiratory allergies (600 cases), occupational skin diseases (1,000 cases), and 900 cases of noise-caused hearing loss. In 1998, 589 cases of asbestos-related diseases were reported.