The effect of filter material on bioaerosol collection of Bacillus subtilis spores used as a Bacillus anthracis simulant

The objective of this study was to determine filter materials and extraction methods that are appropriate to use for environmental sampling of B. anthracis. Four types of filters were tested: mixed cellulose ester (MCE) with a pore size of 3 microm, polytetrafluoroethylene (PTFE) with pore sizes of 1 and 3 microm, and gelatin with a pore size of 3 microm. Bacillus subtilis var. niger endospores (also known as Bacillus globigii[BG]) were used as a surrogate for B. anthracis. Endospores were collected into Button Inhalable Aerosol Samplers with sampling times of 15 minutes, 1 hour, and 4 hours. Physical collection efficiency was determined by measuring upstream and downstream B. subtilis concentrations with an optical particle counter. Vortexing with ultrasonic agitation and vortexing with shaker agitation extraction methods were evaluated. The MCE, 1 microm PTFE, and gelatin filters provided physical collection efficiencies of 94% or greater. The 3 microm PTFE filter showed inconsistent physical efficiency characteristics between filters. Epifluorescence microscopic analysis of the gelatin filter extraction fluid revealed the presence of contamination by non-culturable bacteria. Mean differences for microbial culturability were not statistically significant for filter materials and extraction methods. However, the vortexing with shaker agitation extraction method resulted in higher total microbial counts in the extraction fluids for MCE and 1 microm PTFE filters when compared to vortexing with ultrasonic agitation. In summary, the MCE and 1 microm PTFE filters in combination with vortexing and shaker extraction demonstrated the best performance for the filter collection and extraction of BG spores.     

Release studies of benzalkonium chloride from hydrogel in a freshwater environment

The use of underwater optical sensors to monitor pollution and climate change processes has led to the development of robust instruments able to be deployed in lakes and seas for months at a time. However, despite this improvement in their durability they are subject to biofouling on their optical ports resulting in erroneous readings. The use of hydrogel coatings containing the cationic surfactant benzalkonium chloride (BAC) has been shown to prevent the development of biofouling for up to 12 weeks in the marine environment. In this study the use of hydrogel coatings in the freshwater environment was less successful with fouling visible at 2 weeks. In both field and laboratory studies a rapid initial loss of BAC from the hydrogel film was observed. The loss is a combination of diffusive and mass flow but the period from 12 to 50 h appeared to fit to diffusion kinetics and a diffusion coefficient of 7.3 x 10(-8) cm2 s(-1) (13 degrees C) was calculated, an order of 10 times greater than that found in seawater. Subsequently the rate of loss of the residual BAC, for which a diffusion coefficient of 5.7 x 10(-10) cm2 s(-1) (15 degrees C) was measured, was too low to prevent the early stages of biofouling.     

Antifouling strategies for marine and riverine sensors

Traditionally, water quality has been monitored by sampling and lab based analysis. However, there are disadvantages associated with this method, for example, deterioration of samples with time, limited sampling points, limited temporal monitoring. This has provided impetus for the development of sensors which can be deployed from remote locations over extended deployment periods. However, a major limitation of these systems is their vulnerability to biofouling. This review outlines the research that has been carried out on strategies for the protection of marine and riverine sensors against fouling.     

Visualising the equilibrium distribution and mobility of organic contaminants in soil using the chemical partitioning space

Assessing the behaviour of organic chemicals in soil is a complex task as it is governed by the physical chemical properties of the chemicals, the characteristics of the soil as well as the ambient conditions of the environment. The chemical partitioning space, defined by the air-water partition coefficient (K(AW)) and the soil organic carbon-water partition coefficient (K(OC)), was employed to visualize the equilibrium distribution of organic contaminants between the air-filled pores, the pore water and the solid phases of the bulk soil and the relative importance of the three transport processes removing contaminants from soil (evaporation, leaching and particle erosion). The partitioning properties of twenty neutral organic chemicals (i.e. herbicides, pharmaceuticals, polychlorinated biphenyls and volatile chemicals) were estimated using poly-parameter linear free energy relationships and superimposed onto these maps. This allows instantaneous estimation of the equilibrium phase distribution and mobility of neutral organic chemicals in soil. Although there is a link between the major phase and the dominant transport process, such that chemicals found in air-filled pore space are subject to evaporation, those in water-filled pore space undergo leaching and those in the sorbed phase are associated with particle erosion, the partitioning coefficient thresholds for distribution and mobility can often deviate by many orders of magnitude. In particular, even a small fraction of chemical in pore water or pore air allows for evaporation and leaching to dominate over solid phase transport. Multiple maps that represent soils that differ in the amount and type of soil organic matter, water saturation, temperature, depth of surface soil horizon, and mineral matters were evaluated.     

滤膜在颗粒物无机元素监测中的适用性研究

筛选国内外12个制造商的玻璃纤维、石英、特氟龙、聚丙烯、乙酸纤维、硝酸纤维和混合纤维等7类材质34种滤膜,测定滤膜中的铍、铬、锰、钴、镍、铜、锌、砷、钼、镉、锡、锑、铊和铅等14种元素含量,探讨不同材质滤膜中各元素的质量分数分布,采用大气固定源污染物排放标准中项目限值和分析方法标准中质量控制要求,对铜、锌之外的12种元素进行适用性评价。结果表明:玻璃纤维滤膜比其他材质滤膜中无机元素的质量分数高1～5个数量级,进口玻璃纤维滤膜中铬、镍、砷、镉等4种元素质量分数高于多数国产玻璃纤维滤膜,国产A、H玻璃纤维滤膜中14种元素质量分数相对较低;仅混合纤维滤膜中镉、铅的测定值浓度低于最严标准限值的10%,玻璃纤维滤膜之外的其他材质滤膜均能满足监测其余10种元素的本底需求。     

A Mechanical Model for Sieving of Large Deposited Atmospheric Particulates in Surface Soil

A mechanical model for analyzing the sieving of large particulates in soil is proposed and a procedure for assessing soil contamination by airborne hazardous particulates is discussed. The model proposes that deposition of airborne particulates in soil is the results of transport processes of particulates in surface soil. The mechanical sieving of particulates is due to (a) trapping of particulates by the constricted necks of soil pores, (b) adhesion of particulates to pore walls, and (c) suspension in soil water. The probability of particulates being sieved is determined by the cumulative frequency of pore size distribution of the soil. The proposed model indicated that more than 95% of the falling particulates were sieved in the top 5 cm of the surface soil. Furthermore, the model estimated that the unrecorded initial fall of ¹³⁷Cs associated with contaminated particulates was in the range of 2229–2310 kBqm⁻² d⁻¹ and that the unrecorded initial depositions in the 1-cm surface layer were in the range from 129 to 135 kBqkg⁻¹ at a location of about 30 km from the Fukushima nuclear power plant.

     

High frequency monitoring of the coastal marine environment using the MAREL buoy

The MAREL Iroise data buoy provides physico-chemical measurements acquired in surface marine water in continuous and autonomous mode. The water is pumped 1.5 m from below the surface through a sampling pipe and flows through the measuring cell located in the floating structure. Technological innovations implemented inside the measuring cell atop the buoy allow a continuous cleaning of the sensor, while injection of chloride ions into the circuit prevents biological fouling. Specific sensors for temperature, salinity, oxygen and fluorescence investigated in this paper have been evaluated to guarantee measurement precision over a 3 month period. A bi-directional link under Internet TCP-IP protocols is used for data, alarms and remote-control transmissions with the land-based data centre. Herein, we present a 29 month record for 4 parameters measured using a MAREL buoy moored in a coastal environment (Iroise Sea, Brest, France). The accuracy of the data provided by the buoy is assessed by comparison with measurements of sea water weekly sampled at the same site as part of SOMLIT (Service d'Observation du Milieu LIToral), the French network for monitoring of the coastal environment. Some particular events (impact of intensive fresh water discharges, dynamics of a fast phytoplankton bloom) are also presented, demonstrating the worth of monitoring a highly variable environment with a high frequency continuous reliable system.     

Assessment of environmental variations caused by a very large floating structure in a semi-closed bay

To assess the environmental impacts of large floating structures, various physical, chemical, and biological parameters were measured. The current and water quality were monitored around a prototype floating structure called the Phase-II Mega-Float model (MF-II model), which was moored off Yokosuka in Tokyo Bay during the period 1999–2000. The effects of the MF-II model on the condition of the physical environment, e.g., the direction and flow rate of water currents and the stratification structure, were negligible. Analysis of water quality showed that the concentrations of chlorophyll a and nutrients only varied just below the MF-II model. However, such variations were localized to within 5 m below the MF-II model since the waters were exchanged because of the tidal current. The minor changes in water quality are attributable to the impedance of photosynthesis due to the sea-covering effect and the activities of sessile organisms fouling the bottom surface of the MF-II model.     

Media Factors Affecting the Performance of Upflow Anaerobic Packed-Bed Reactors

Numerous studies have demonstrated that anaerobic packed-bed reactors (APBRs) containing media such as clay chip, small stone, and porous plastic modules are effective for treating a variety of organic wastes. Most of these studies focused on the treatment capabilities of the processes, yet little work was done about the factors affecting their designs and performance. This paper presents the results of a study on a laboratory scale APBR system examining the significance of media factors such as media roughness, specific surface area, porosity and pore size on treatment performance. The results showed that media roughness and pore size were more important over surface area on the reactor performance. Within the same media porosity, pore size plays a more significant role than surface area in term of COD removal efficiency. The study indicates that the ability of a support medium to retain biomass either as suspended growth entrapped in the void space, or by attachment to the media surface is a significant consideration in an upflow APBR. A testing protocol for measuring methane gas produced by the suspended biomass using a batch serum bottle technique was developed and presented in this study. The method involved measurements of hourly methane production and instantaneous TOC concentration from the suspended biological solids extracted from various reactor heights. The proportion of methane production associated with the suspended biomass was as high as 58% at organic loading rate of 16 g COD/L.day. The results suggest that media pore size and porosity play a significant role in the performance of upflow APBRs.     

The potential of biomonitoring of air quality using leaf characteristics of white willow (Salix alba L.)

In this study, we assess the potential of white willow (Salix alba L.) as bioindicator for monitoring of air quality. Therefore, shoot biomass, specific leaf area, stomatal density, stomatal pore surface, and stomatal resistance were assessed from leaves of stem cuttings. The stem cuttings were introduced in two regions in Belgium with a relatively high and a relatively low level of air pollution, i.e., Antwerp city and Zoersel, respectively. In each of these regions, nine sampling points were selected. At each sampling point, three stem cuttings of white willow were planted in potting soil. Shoot biomass and specific leaf area were not significantly different between Antwerp city and Zoersel. Microclimatic differences between the sampling points may have been more important to plant growth than differences in air quality. However, stomatal pore surface and stomatal resistance of white willow were significantly different between Zoersel and Antwerp city. Stomatal pore surface was 20% lower in Antwerp city due to a significant reduction in both stomatal length (?11%) and stomatal width (?14%). Stomatal resistance at the adaxial leaf surface was 17% higher in Antwerp city because of the reduction in stomatal pore surface. Based on these results, we conclude that stomatal characteristics of white willow are potentially useful indicators for air quality.     

The devil is in the details (or the surface): impact of surface structure and surface energetics on understanding the behavior of nanomaterials in the environment

Metal and metal oxide nanomaterials are found in many consumer products for use in a wide range of applications including catalysis, sensors and contaminant remediation. Because of the extensive use of metal-based nanomaterials, there are concerns that these materials have the potential to get into the environment sometime during production, distribution, use and/or disposal. In particular, there exists the potential that they will make their way into water systems, e.g. drinking water systems, ground water systems, estuaries and lakes. In this review, some of the uncertainties in understanding nanoparticle behavior, which is often due to a lack of fundamental knowledge of the surface structure and surface energetics for very small particles, are discussed. Although classical models may provide guidance for understanding dissolution and aggregation of nanoparticles in water, it is the detailed surface structure and surface chemistry that are needed to accurately describe the surface free energy, a large component of the total free energy, in order to fully understand these processes. Without this information, it is difficult to develop a conceptual framework for understanding the fate, transport and potential toxicity of nanomaterials. Needed research areas to fill this void are discussed.     

Nonpoint Source Pollution Assessment of Wujiang RiverWatershed in Guizhou Province,SW China

The amount of pollution from nonpoint sources flowing in the streams of the Wujiang River watershed in Guizhou Province, SW China, is estimated by a geographic information system (GIS)-based method using rainfall, surface runoff and land use data. A grid of cells of 100 m in size is laid over the landscape. For each cell, mean annual surface runoff is estimated from rainfall and percent land use, and expected pollutant concentration is estimated from land use. The product of surface runoff and concentration gives expected pollutant loading from that cell. These loadings are accumulated going downstream to give the expected annual pollutant loadings in streams and rivers. By dividing these accumulated loadings by the similarly accumulated mean annual surface runoff, the expected pollutant concentration from nonpoint sources is determined for each location in a stream or river. Observed pollutant concentrations in the watershed are averaged at each sample point and compared to the expected concentrations at the same locations determined from the grid cell model. In general, annual nonpoint source nutrient loadings in the Wujiang River watershed are seen to be predominantly from the agricultural and meadow areas. The total annual loadings through the outlet of the watershed are 40,309 and 2,607 tons for total nitrogen (TN) and total phosphorus (TP), respectively.     

Sampling and analyses of colloids at the Drigg low level radioactive waste disposal site

Water samples have been extracted from inside (from standpipes) and from outside (from boreholes) of the trenches at the low level radioactive waste disposal site at Drigg in Cumbria, UK. The samples were taken anaerobically from between 8.5 and 10.0 m below the surface using a submersible pump at low flow rates to ensure that the waters in the standpipes and boreholes were maintained at constant levels. To ensure representative samples, the Eh, pH. conductivity, temperature, iron and dissolved oxygen concentrations of the waters were taken during initial purging and during sampling. The gross tritium, gross non-tritium beta, gross alpha and gamma activities of each sample were determined using suitable sample preparation and counting techniques. Samples were then anaerobically, sequentially filtered through 12 microm, 1 microm, 30 kDa and 500 Da filter membranes. The filtrates were analysed for gross alpha, gross non-tritium beta and gamma activities. SEM and STEM analyses were used to determine the colloid population. An energy dispersive analyser on the SEM was used to determine the major elements present in the colloids. UV-visible spectrophotometry, fluorescence spectrophotometry and high performance size exclusion liquid chromatography were used to analyse the waters before and after treatment with ion exchange materials to determine whether natural organic matter was present in the waters. Results showed that two major types of colloids (iron containing colloids and silicon containing colloids) were present in the waters. There were also a small number of other colloids that contain, as major elements, aluminium, calcium and chromium. Organic colloids were also present. The majority of the radioactivity in the waters was due to tritium. Waters taken from outside the trenches contained low levels of non-tritium beta activities and alpha activities which were lower than the minimum detectable amount. Waters taken from the trenches contained non-tritium beta activities and low levels of alpha emitters. Filtration of the trench waters showed that some of the alpha activity was retained by the 30 kDa and 500 Da membranes suggesting that this activity was associated with small colloids. Radioactivity was not found to be associated with colloids present in the waters taken from outside the trenches. Possible reasons for this observation could be that radionuclide bearing colloids have not yet reached the far-field or that the radionuclide concentration is diluted to below the minimum detectable amount. After concentrating two of the samples by factors of x20 and x 16 respectively, 2.4+/-0.1 and 0.6+/-0.1 Bq dm(-3) of 137Cs were measured.     

A ten channel fibre-optic device for distributed sensing of underground hydrocarbon leakage

With millions of fuel storage tanks and oil pipelines installed around the world, there is inevitably frequent leakage of potentially hazardous hydrocarbons. As many of these installations are below ground, it can often be many years before the extent of the leak is discovered. We have previously reported the development of a sensor for the detection of such subterranean leaks, using infrared reflectometry to interrogate a hydrocarbon sensitive membrane. However, a single sensor cannot provide any information about the flow rate or direction of the leak. This paper describes the extension of the technology to a multi-channel distributed sensing system, using optical fibres capable of distributing the sensors over large subterranean areas. Results are reported from the evaluation of the device, which consisted of monitoring the movement of different hydrocarbons (gasoline, diesel and insulating oil) through a vertical sand-filled vessel.     

有机物渗透管的研制

介绍了用Wh聚四氟乙烯膜作为渗透材料制作有机物渗透管的方法,并且针对所研制的渗透管的特性、影响渗透率的主要因素及渗透率的稳定性等方面进行了探讨.     

Implementing In-Stream Nutrient Processes in Large-Scale Landscape Modeling for the Impact Assessment on Water Quality

For a long time, watershed models focused on the transport of chemicals from the terrestrial part of the watershed to the surface water bodies by leaching and erosion. After the substances had reached the surface water, they were routed through the channel network often without any further transformation. Today, there is a need to extend watershed models with in-stream processes to bring them closer to natural conditions and to enhance their usability as support tools for water management and water quality policies. This paper presents experience with implementing in-stream processes in a ecohydrological dynamic watershed model and its application on the large scale in the Saale River basin in Germany. Results demonstrate that new implemented water quality parameters like chlorophyll a concentrations or oxygen amount in the reach can be reproduced quite well, although the model results, compared with results achieved without taking into account algal and transformation processes in the river, show obvious improvement only for some of the examined nutrients. Finally, some climate and water management scenarios expected to impact in-stream processes in the Saale basin were run. Their results illustrate the relative importance of physical boundary conditions on the amount and concentration of the phytoplankton, which leads to the conclusion that measures to improve water quality should not only take nutrient inputs into account but also climate influences and river morphology.     

浅析被动采样器监测环境空气质量数据的可比性

对被动采样器与空气自动站监测环境空气质量进行了全年的对比实验,并对大量的监测数据进行了规范的处理分析。结果表明,被动采样器在环境条件持续稳定满足采样条件时,被动采样器与自动站监测结果无显著性差异;在环境条件不能持续稳定满足采样条件时,二者监测结果有显著性差异,但仍有较大的相关性。     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.     

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.