Sediment influence on congener-specific PCB bioaccumulation by Mytilus edulis: a case study from an intertidal hot spot, Clyde Estuary, UK

An intertidal site in the Clyde Estuary, UK, was selected to evaluate the role of sediment geochemistry on the bioaccumulation of polychlorinated biphenyls (PCBs) by mussels (Mytilus edulis). The area had previously been identified as showing anomalously high levels of PCB contamination (over 1,500 microg kg(-1) total PCB in sediment, 22 congeners). Samples of surface sediment and M. edulis were collected from two closely located sites, one within the anomalous area and another representing typical PCB contamination in the estuary. Sediment samples were separated into grain size fractions and analysed for a range of biomarker compounds, PCBs and sediment mineralogy. The anomalous site showed an atypical association of PCBs with sediment properties, despite both locations showing influence of both petrogenic and pyrogenic organic contamination. Interrogation of data using correlation and principal component analysis showed that sediment mineralogy as well as organic matter composition influenced PCB congener distribution. One sediment source was found to control the PCB concentration in mussels at both locations and clay mineralogy appears to control PCB uptake by biota with preference for higher molecular weight congeners. Overall bioavailability is determined by sediment TOC.     

Historical data review and source analysis of PCBs/Arochlors in the Lower Leon Creek Watershed

PCBs have been banned since the late 1970s, but concentrations still exist in sediments and riverine fish and continue to exceed regulatory limits which can result in negative health effects. This study looks at historical records of PCB and Arochlor concentrations in surface water, sediments, and fish tissue for the Lower Leon Creek, Bexar County in Texas. Temporal analysis on the concentrations of PCBs and Arochlors was conducted for detection and exceedance of selected screening criteria. In addition, the half-lives of select PCB congeners were calculated for 2007–2012 data to ascertain differences in PCB concentrations with their hydrophobicity. Source analysis was conducted to determine the potential contributing sources of PCB contamination using source data (landfills, outfalls, etc.) and the PCB exceedance data. For sediment and fish tissue sampling results, historic data shows high concentrations of PCB/Arochlors over the course of several decades. The historical data is characterized as being widely variable for detections in Arochlors and concentrations between years, with a dramatic drop in concentrations detected starting in 2009. Overall, the sampling locations adjacent to and downstream from the former Kelly Air Force Base have the highest concentrations of PCB/Arochlors over the longest period of time. The results of this work will aid regulatory agencies in addressing impairment.     

Congener profiles of polychlorinated biphenyls in core sediments of Sunderban mangrove wetland (N.E. India) and their ecotoxicological significance

The paper presents the first comprehensive survey of congener profiles of polychlorinated biphenyls (PCBs) in core sediment samples (<63 microm particle size) covering seven sites in Sunderban mangrove Wetland, north-eastern part of the Bay of Bengal. Results pointed out a non-homogenous contamination of the wetland with Sigma23PCB values ranging from 0.5 to 26.9 ng g(-1) dry weight, reflecting very low to moderate contamination closely in conformity to other Asian coastal environment. The general decreasing order of the dominant congeners to the total load was: CB138 > 153 > 149 > 101, indicating the predominance of hexa-chlorinated congeners. The spatial distribution revealed significant differences in concentration related to local urbanization with industrial and land-based sources. No uniform temporal trend on PCB levels was recorded probably due to particular hydrological characteristics of the wetland and/or non-homogenous inputs from point sources. Strong positive correlations between the seven dominant congeners suggest their common sources and similar environmental behaviors. These results were also used for a risk assessment evaluation in the Sunderban wetland, showing that the present PCB levels were exceeding in few cases the lower limit of sediment quality guidelines of Environmental Protection Agency and Canadian Council of Ministers of the Environment.     

State of the Estuaries in the Mid-Atlantic Region of the United States

The U.S. EPA has prepared a State of the Region Report for Mid-Atlantic Estuaries to increase knowledge of environmental condition for improved environmental management. Sources of information included the National Estuary Programs, the Chesapeake Bay Program, the state monitoring programs in Delaware, Maryland, and Virginia, Federal programs such as National Status & Trends, National Shellfish Register, National Wetlands Inventory, the Environmental Monitoring and Assessment Program, and other primary literature sources. The state of the estuarine environment was summarized using indicators for water and sediment quality, habitat change, condition of living resources, and aesthetic quality. Each indicator was briefly discussed relative to its importance in understanding estuarine condition. Wherever possible, data from multiple programs were used to depict condition. Finally, an overall evaluation of estuarine condition in the region was determined. The usefulness of monitoring programs that collect consistent information with a well-defined sampling design cannot be overemphasized.     

Dissolved insecticides and polychlorinated biphenyls in the Pearl River Estuary and South China Sea

Persistent organic pollutants (POPs) such as organochlorine (OCl) insecticides and polychlorinated biphenyls (PCB), together with the new generation of organophosphorus (OP) insecticides, are of global concern, due to their widespread occurrence, persistence, bioaccumulation and hormone disruption potential. This paper represents an attempt to study the source and transportation of such pollutants in estuarine and coastal environments as an integrated ecosystem, by determining the levels of 18 OCl insecticides, 21 PCB congeners, and 17 OP insecticides in the Pearl River Estuary and South China Sea. The total concentrations varied from 126-1198 ng l(-1) for OCl insecticides, 33.38-1064 ng l(-1) for PCB congeners, and 4.44-6356 ng l(-1) for OP insecticides in the Pearl River Estuary. In comparison, their levels in the South China Sea were significantly lower, varying from 57.09-202 ng l(-1) for OCl insecticides, 21.72-144 ng l(-1) for PCBs, and 1.27-122 ng l(-1) for OP insecticides, respectively. The predominance of beta-HCH in HCHs, and DDE in DDTs in all water samples was clearly observed, suggesting beta-HCH and DDE's resistance to further degradation. The PCBs were dominated by those with 3-6 chlorines. The distribution characteristic of OP insecticides shows that five compounds (methamidophos, dimethoate, malathion, dichlorvos and omethoate) accounted for 56% and 72% of the total OP insecticide concentration. The relationship between pollutant concentrations and salinity in the estuary showed that they were all removed during the mixing process, therefore behaving non-conservatively.     

Quantitative analyses of selected polychlorinated biphenyl (PCB) congeners in water,soil, and sediment during winter and spring seasons from Msunduzi River,South Africa

The lack of information and the need for knowledge on the organic pollutants within the area of KwaZulu-Natal together with the global problem of water supply have prompted our investigation into the analyses of eight polychlorinated biphenyl (PCB) congeners in the Msunduzi River of KwaZulu-Natal, South Africa. Soil, sediment, and water samples were collected at ten different sites along the river during winter and spring seasons. Soil and sediment samples were extracted using ultra sonication with dichloromethane while water samples were liquid-liquid extracted using dichloromethane. All sample extracts were cleaned-up using a multi-layer silica gel column and analyzed with gas chromatography-mass spectrometry. Quality assurance measures were also determined. The percentage recoveries for water were 53–128 for all the PCBs analyzed, while sediment recoveries ranged between 69 and 105%. The highest total concentrations of the PCBs in sediment were 214.21–610.45 ng/g dw at the Du Toit sampling site and 30.86–444.43 ng/g dw basis at the wastewater treatment inlet for winter and spring, respectively. Soil PCB concentrations were 76.53–397.75 ng/g dw at the Msunduzi Town sampling site and 20.84–443.49 ng/g (dry weight) at the Du Toit sampling site for winter and spring, respectively. In addition, high PCB concentrations were found in effluent of the wastewater treatment inlet compared to other sampling sites, which ranged between 0.68–22.37 and 2.53–35.69 ng/mL for winter and spring seasons, respectively. In all the sampling sites selected for this study, Du Toit afforded the highest PCB concentration levels and the lowest was after chlorination at the Darvill wastewater treatment plant. The results presented are new and it is the first study of organic pollutants such as PCBs that has been carried out on this river.     

Occurrence of PAHs and PCBs in the Alna River, Oslo (Norway)

Thirty two polychlorinated biphenyl congeners (PCBs), hexachlorobenzene (HCB) and pentachlorobenzene (PeCB) were analysed in passive sampler extracts from surface water-exposed semipermeable membrane devices (SPMDs) and in bed sediment samples from a small urban watercourse, the River Alna (Oslo, Norway). Performance reference compound-corrected data from the passive samplers deployed at three sites along the river were used to track PCB contamination in the overlying water. SPMDs were able to detect an increase in dissolved PCB concentrations at the site furthest downstream that was corroborated by bed sediment concentrations. In comparison, no major increase in concentration of HCB, PeCB or PAHs could be observed. Comparison of passive sampling-based overlying water concentrations with total concentrations measured in bed sediments supports the possibility of further PCB sources upstream of the study area. Diagnostic PAH ratios (from SPMDs) and PCB congener pattern (from sediments) were used in an attempt to identify possible contaminant sources to the Alna River. Selected PAH diagnostic ratios support a multiple emission source scenario and demonstrate the complexity of identifying specific sources of these compounds to surface waters. PCB congener patterns in sediments from all three sites tend to indicate a source of highly chlorinated PCBs (of the Archlor 1260 type) and either a source of lower chlorinated PCBs or the less-likely occurrence of dechlorination in sediment. Information collected during the present screening study also confirms the Alna River as a continuous source of PCBs to the Oslofjord.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Parameters affecting partitioning of 6 PCB congeners in natural sediments

Polychlorinated biphenyls (PCBs) released by bottom sediments were determined by experiments in which the sediments were artificially resuspended using sediment contaminated with PCBs in a particle entrainment simulator (PES). Sediment cores, spikedwith PCBs, were collected from the Housatonic River in Connecticut and run in the PES at simulated shear stresses from 0 to 0.6 N m^-2. Experimental results from these simulations have shown that mean concentration of PCBs in thesolid phase for sites with high volatile organic carbon (VOC) were significantly greater than samples with low VOC; the reversewas true for the water phase. In addition, on a mass load basis,the amount of PCBs found in sediment increased when shear stresses were increased from 0 to 0.6 N m^-2, beyond which shear stress did not affect mass loads in the watercolumn. Partition coefficients (K _p) were determined from PESsediment and water data for the following congeners: PCB 28, PCB 52, PCB 101, PCB 138, PCB 153, PCB 180. K _p was determined to be inversely proportional to total suspended solids (TSS), butdirectly proportional to chlorine content of the congener. Because of the strong influence of TSS and VOC concentrations onK _p values, agitation of samples using a PES better simulatedreal environmental conditions when compared to jar studies where no agitation was employed. Therefore, a device like the PES is more appropriate in obtaining K _p that would be found underreal stream flow conditions when compared to the traditionalway of measuring K _p using the jar study technique.     

The application of ICP-SMS, GF-AAS and HG-AFS to the analysis of water and sediment samples from a temperate stratified estuary

Three atomic spectrometry techniques, namely sector field inductively coupled plasma mass spectroscopy, graphite furnace atomic absorption spectrometry and hydride generation atomic fluorescence spectroscopy (ICP-SMS, GF-AAS and HG-AFS, respectively), housed at separate independent laboratories, were used to analyse water and sediment samples collected from the Huon River Estuary, SE Tasmania (Australia) in the Austral spring 1998. A dithiocarbamate-chelation/back-extraction technique was used to separate and preconcentrate Co, Ni, Cu, Zn, Cd and Pb from eight collected water samples prior to analysis by ICP-SMS and GF-AAS. A number of other elements in the waters were analysed directly (Mn, Fe and Zn by GF-AAS; As by HG-AFS), or following sample dilution (1 + 19: V, Mn, Fe, As, Mo, Ba and U by ICP-SMS). Where possible, previously corroborated GF-AAS and HG-AFS techniques were used to verify obtained ICP-SMS results. From the analysis of four reference waters (SLEW-1 and -2, SLRS-3 and NASS-5), good agreement, to within +/- 10-20%, was typically found between certified (or information only values) and measured results (irrespective of analytical technique). Exceptions included Zn (and sometimes Fe) that could not be quantified by ICP-SMS due to elevated blank signals, and As which was found to lie below ICP-SMS detection limits. For Huon Estuary water samples, inter-method agreement was within +/- 10-20% (for those elements amenable to analysis by more than one technique). Nitric acid extracts of two certified reference materials (Buffalo River Sediment and BCSS-1) and six Huon Estuary sediments were analysed by ICP-SMS (for Al, Sc, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Cd and Pb) and HG-AFS (for As). Results from the certified reference materials indicated extraction efficiencies of 60 70% (for most elements). A close correlation between ICP-SMS and HG-AFS was obtained for leachable As in the sediments. In terms of potential inorganic contaminants, the Huon Estuary was found to be a relatively 'clean' water system. The elemental concentrations measured in water and sediment samples from this region were found to lie within current Australian guidelines for estuaries. In general, no one analytical technique was able to accurately determine all elements in all samples from this relatively pristine estuarine environment. A combination of all three analytical techniques was necessary for the successful analysis of the elements considered in this study.     

沉积物中多氯联苯分析的纯化条件优化研究

比较了各种填料层析柱和洗脱液的差别,并根据有机溶剂使用量较少的样品纯化方案,建立了适用低有机质含量水体表层沉积物中不同极性多氯联苯(PCBs)的分析方法.结果表明,该方法检测限在0.11 ng/g～0.35 ng/g(干重)之间,对主要多氯联苯同族体的回收率是77.9%～112.1%.用该法分析了长江中下游水体表层沉积物中的PCBs,质控结果表明,该纯化方法的效果理想.     

An assessment of persistent organic pollutants in Scottish coastal and offshore marine environments

Concentrations of persistent organic pollutants (POPs), including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) were determined in sediment and biota (fish liver) from around Scotland. The concentrations were investigated using assessment criteria developed by OSPAR and ICES. Organic contaminant concentrations, PAHs, PCBs and PBDEs in sediment, and PCBs and PBDEs in fish liver, were significantly higher in the Clyde compared to all other sea areas. This is mainly due to historic industrial inputs. Highest PCB and PAH concentrations were found in the strata furthest up the Clyde estuary, with concentrations of POPs in these strata being at levels such that there is an unacceptable risk of chronic effects occurring in marine species. Furthermore, for PAHs in Clyde sediment there was a significant negative gradient going from north to south towards the open sea. PAH and PCB concentrations in sediment and biota in all other Scottish sea areas (except for PCBs in sediment from East Scotland) were unlikely to give rise to pollution effects, being below relevant assessment criteria. Although no assessment criteria are available for PBDEs, the concentrations observed in Scottish sediments were low with all congeners below the limit of detection (LoD; 0.03 μg kg(-1) dry weight) in 140 out of a total of 307 samples analysed. Where PBDEs were detected, the dominant congeners were BDE47 and BDE99. PBDEs were detected in fish livers, although concentrations were less than 150 μg kg(-1) lipid weight in all sea areas except the Clyde where concentrations ranged between 8.9 and 2202 μg kg(-1) lipid weight. Few trends were detected in contaminant concentrations in biota or sediment at any Scottish site with more than five years data. Downward trends were detected in PAHs in sediment from the Clyde, Irish Sea and Minches and Malin Sea and PCBs in fish liver from the Moray Firth. Rules were developed for the aggregation of the contaminant data across a sea area. An overall assessment for each sea area was then assigned, looking at the frequency of sites or strata within each sea area that were above or below the relevant assessment criteria. Overall the status of the various sea areas, with respect to the assessed POPs, can be considered to be acceptable in that they were below concentrations likely to result in chronic effects for all sea areas except the Clyde.     

Levels of some toxic elements and frequency of bacterial heavy metal resistance in sediment and sea water

The Golden Horn Estuary located in the Istanbul region of Turkey has been thought to be a heavily polluted area since the 1950s: the concentration of the elements, which include heavy metals such as Cu2+, Mn2+, Ni2+, Zn2+, Pb2+, Cd2+, and Fe2+, was therefore investigated in sediment and water samples of the area. The resistance of Enterobacteriaceae members to some heavy metal salts was investigated to determine levels of metal-resistant bacteria in the Golden Horn Estuary after the environmental restoration project in 1998. The sediment samples were collected with an Ekman-Grab in the period from November 2002 to February 2004 from depths of 4-15 m and analyzed by means of an atomic absorption spectrophotometer. Analyses of average heavy metals of sediment samples yielded the following results: 131.5 ppm Cu, 405.5 ppm Mn, 46.5 ppm Ni, 191.2 ppm Zn, 81.5 ppm Pb and 27668 ppm Fe. As with water, Ni concentrations in sediment were found lower than that in limit values. Frequency of heavy metals resistance to Cu, Zn, Fe, Ni, Mn, Pb and Cd was detected as an average of 65.0%, 64.4%, 62.5%, 38.4%, 37.3%, 36.2% and 28.4%, respectively in a total of 192 strains isolated from sediment samples. It was observed that there was no statistically significant difference among the results of analyses with respect to sampling dates. Despite the environmental restoration project in 1998, our study results showed that heavy metal levels were still high in the sediment and this situation induced the tolerance of bacteria to some heavy metals.     

Perfluorooctane sulfonate (PFOS) distribution and effect factors in the water and sediment of the Yellow River Estuary, China

The distribution of perfluorooctane sulfonate (PFOS) was investigated in a total of 15 water and sediment samples from the Yellow River Estuary, China in April 2011. The results indicated that the concentrations of PFOS in the water and sediment samples averaged 157.5 ng/L and 198.8 ng/g and ranged from 82.30 to 261.8 ng/L and 75.48 to 457.0 ng/g, respectively. The concentrations of PFOS in the sediment column increased from 45.32 to 379.98 ng/g with the decrease of the sampling depth, which showed that the increased PFOS pollution in the sediment appeared in this region in over recent years. The distribution coefficient (K _d) of PFOS between water and sediment linearly increased from 0.37 to 4.80 L/g as the salinity (S‰) increased from 0.18 to 4.47. Correlation analysis revealed that K _d was significantly and positively correlated to the contents of total organic carbon and clay of the sediment, and salinity. Therefore, salinity was an important parameter in controlling the sediment–water interactions and the fate or transport of PFOS in the aquatic environment. The results of this study showed that the estuary was an important sink for PFOS and suggested that PFOS might be carried with the river water and transported for long distances before it reached to the sea and largely scavenged to the sediment in the estuaries due to the change in salinity.     

A pilot study of pesticides and PCBs in the breast milk of women residing in urban and agricultural communities of California

Currently, there is no nationally representative human milk biomonitoring program in the United States (U.S.) and no studies have reported non-persistent pesticides in the milk of U.S. women. In this pilot study we developed a multiresidue laboratory method to measure non-persistent and persistent pesticides and polychlorinated biphenyl (PCB) congeners in human milk samples from women residing in the agricultural region of Salinas, CA (n = 13) and the urban San Francisco Bay Area, CA (n = 21). Samples were collected from 2002-2007. Median concentrations in pg g(-1) milk among urban and agricultural women, respectively were reported for: chlorpyrifos (24.5 and 28.0), cis-permethrin (81.9 and 103), trans-permethrin (93.1 and 176), hexachlorobenzene (191 and 223), β-hexachlorocyclohexane (220 and 443), o,p'-DDT (36.6 and 62.4), p,p'-DDT,(107 and 102), o,p'-DDE (5.65 and 5.17), p,p'-DDE (3170 and 3490), dacthal (2.79 and 3.43), PCB 118 (92.8 and 17.0), PCB 138 (183 and 38.2), PCB 153 (242 and 43.6) and PCB 180 (239 and 683). Among urban women, median concentrations were 4.02 and 4.32 pg g(-1) milk for chlorpyrifos-methyl and propoxur, respectively. These results suggest that neonates and young children may be exposed to persistent and non-persistent pesticides and PCBs via breast milk.     

Occurrence of PCBs in raw and finished drinking water at seven public water systems along the Hudson River

Polychlorinated biphenyls (PCBs) were measured in raw and finished drinking water at seven Public Water Systems (PWSs) along the Hudson River as part of a baseline monitoring program prior to the extensive sediment dredging of the Upper Hudson River. Water samples were either analyzed using an Aroclor method (based on USEPA Method 508) or a congener method (Modified Green Bay Mass Balance Method). Using the congener-based method, raw water concentrations ranged from <9.3 to 164.3 ng/L and finished water concentrations ranged from <9.3 to 186.6 ng/L. Using the Aroclor method, finished water concentrations ranged from <5.0 to 200.9 ng/L. Most finished water samples above 73.0 ng/L were from a PWS with wells drilled near the river. Excluding the well data, total PCB concentrations in raw water at systems in the Upper River were similar to concentrations at systems in the Lower River, though the congener patterns differed. Paired comparison of total PCB concentrations using the two analytical methods showed good agreement, although raw water showed a different relationship than finished water.     

An Overview of Contaminant-Related Issues Identified by Monitoring in San Francisco Bay

The San Francisco Estuary Regional Monitoring Program for Trace Substances (RMP) began in 1993 and is sponsored by 74 local, state, and federal agencies and companies through their discharge or Bay use permits. The RMP monitors water, sediment, toxicity, and bivalve bioaccumulation at 25 sites in the Bay that are considered to represent "background" conditions. Several major environmental issues have been identified by the RMP. Polychlorinated biphenyls and mercury were often above water quality guidelines, and often occurred in fish tissues above U.S. Environmental Protection Agency (U.S. EPA) screening values. Concentrations do not appear to be decreasing, suggesting continuing inputs. Episodes of aquatic toxicity often occurred following runoff events that transport contaminants into the Bay from urbanized and agricultural portions of the watershed. Sediment toxicity occurred throughout the Bay, and has been correlated with concentrations of specific contaminants (chlordanes, polynuclear aromatic hydrocarbons) at some locations; mixtures of contaminants were probably also important. Since the RMP does not monitor all ecosystem components, assessments of the overall condition of the Bay cannot be made. However, in terms of contamination, the RMP samples suggest that the South Bay, and North Bay sites are moderately contaminated.     

Comparison of Streambed Sediment and Aquatic Biota as Media for Characterizing Trace Elements and Organochlorine Compounds in the Willamette Basin, Oregon

During 1992–93, 27 organochlorine compounds (pesticides plus total PCB) and 17 trace elements were analyzed in bed sediment and aquatic biota from 20 stream sites in the Willamette Basin as part of the U.S. Geological Survey's National Water-Quality Assessment Program. Data from each medium were compared to evaluate their relative effectiveness for assessing occurrence (broadly defined as documentation of important concentrations) of these constituents. Except for Cd, Hg, Se, and Ag, trace element concentrations generally were higher in bed sediment than in biota. Conversely, although frequencies of detection for organochlorine compounds in biota were only slightly greater than in bed sediment, actual concentrations in biota (normalized to lipid) were as much as 19 times those in sediment (normalized to organic carbon). Sculpin (Cottus spp.) and Asiatic clams (Corbicula fluminea), found at 14 and 7 sites, respectively, were the most widespread taxa collected during the study. Concentrations of trace elements, particularly As and Cu, were typically greater in Asiatic clams than in sculpin. In contrast, almost half of the organochlorine compounds analyzed were found in sculpin, but only DDT and its degradation products were detected in Asiatic clams; this may be related to the lipid content of sculpin, which was about three times higher than for clams. Thus, the medium of choice for assessing occurrence depends largely on the constituent(s) of interest.     

Levels, distribution, and risk assessment of organochlorines in surficial sediments of the Red Sea coast, Egypt

The analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in surficial sediment samples collected from 17 locations along with the coast of the Red Sea in Egypt were carried out using gas chromatography–mass spectrometry. Several potential organic contaminants from agricultural (e.g., DDT and its breakdown products, lindane, endrin, dieldrin, and endosulfan) and industrial (PCBs) sources were measured. The levels of 20 organochlorine pesticides (OCPs) and ten PCB congeners in sediment collected from 17 stations along ~1,200 km were investigated. Concentrations of PCBs, HCHs, DDTs, and cyclodienes ranged from 0.40 to 6.17, 0.01 to 0.09, n.d. to 0.46, and 0.08 to 0.90 ppb dry weight. Two statistical programs were applied on the data (principal component analysis, PCA, and cluster analysis, CA), and it was concluded that it is impossible to predict the distribution patterns of the OCPs in a contaminated area. Risk assessment of the organochlorines contaminated in the sediments of the studied area was investigated.     

Concentrations, distributions, and sources of polychlorinated biphenyls and polycyclic aromatic hydrocarbons in bed sediments of the water reservoirs in Slovakia

Dredging water reservoirs is necessary to maintain accumulation capacity and to prevent floodings. As a first step, the quality of the bed sediments in water reservoirs must be determined before dredging operations. In this study, sediment samples from 34 stations of three selected water reservoirs (Zemplinska Sirava, Velke Kozmalovce, and Ruzin) were collected to investigate concentrations, distributions, and hazards of polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) and to predict their possible sources. Total PCB concentrations were in the range of 20.4 to 2,325?ng/g. The maximum concentrations of PCBs were found in sediments from Zemplinska Sirava, which is in the vicinity of a former manufacturer of PCBs. The composition of PCBs was characterized by tri- and hexa-CB congeners, indicating the influence of contamination from the use of specific Delor mixtures, formerly produced and massively used on the territory of Slovakia. The data showed that the highest total PAH concentrations were associated with the sediments from the Velke Kozmalovce, ranging from 7,910 to 29,538?ng/g. On the other hand, the lowest total PAH concentrations (84?C631?ng/g of dry weight) were found in the sediments of Zemplinska Sirava, an important recreational area in eastern Slovakia. The distribution of individual PAHs was similar among the three water reservoirs, and this, together with principal component analysis and diagnostic PAH ratios, suggests mainly pyrolytic contamination of the sediments. However, petrogenic inputs appear to be important in the Zemplinska Sirava sediments.