天津市臭氧污染现状与污染特征分析

通过臭氧监测实验,系统研究了天津市城区的臭氧污染现状、污染特征和时空分布规律,并从空间上确定了城市城区易发生光化学污染的敏感区域、高发区域.     

作者投稿须知

为提高工作效率,《中国环境监测》编辑部网上采编系统现已使用,形成了籍于稿件处理过程中录用信息、版面费、发票等情况查询一体的业务流程。投稿时,请作者登录《中国环境监测》编辑部网站     

投稿须知

正投稿请登录本刊网站:http://hiicgl.cnjournals.net,在"作者登录"区注册投稿。稿件中请注明联系电话、通信地址。3个月未见本刊修改意见或录用通知,作者可自行另投他刊。来稿若属基金项目、国家攻关项目     

徐州城市主要环境功能区空气微生物污染状况评价

通过对徐州城市主要环境功能区空气微生物(细菌总数和霉菌总数)进行监测,对照有关评价指标,作出空气微生物污染状况评价,对不同时间、不同区域的差异成因进行了初步分析.     

日本城市环境监测技术系统运营管理研究与借鉴

日本城市环境监测技术系统管理经历多年探索和总结,形成了成熟的运营模式,对我国现行技术系统的管理实践极有借鉴价值.目前环保部门在相应的管理、技术和人才等方面准备不足,面对社会专业化公司的参与,在管理和运营中暴露出一些问题,比较和借鉴国外市场化运营理念,将促进我们管理思路的创新.     

作者投稿须知

为提高工作效率,《中国环境监测》编辑部网上采编系统现已使用,形成了籍于稿件处理过程中录用信息、版面费、发票等情况查询一体的业务流程。投稿时,请作者登录《中国环境监测》编辑部网站(http://www.cnemce.cn),注册后按     

中国环境规划的探析

阐明了环境规划与国民经济和气候变化的关系。通过中美环境规划差异的比较和分析,指出健全和完善环境规划制度的重要性。对旧的环境规划体系进行改革,建立新的科学的环境规划体系是中国环境规划发展的必然趋势。     

创建国家环境保护模范城市软件资料体系的建立

软件资料的收集、整理与归档是创建国家环境保护模范城市(以下简称创模)的重点工作之一,贯穿创模的全过程.通过查看资料,可以了解该地区的环境状况是否达到模范城市的要求,同时参照创模考核指标,及时发现存在的重点、难点问题[1],以此推动城市基础设施建设.完整齐全的软件资料,可以使考核专家组在短暂的创模技术评估考核期间了解该地区的基本信息、社会经济发展程度、环境质量与管理情况、基础设施建设进展、污染源布局及治理达标等环境状况,便于专家组全面检查.因此,建立完备的软件资料体系是创模成功的重要保障.     

公众意见调查在建设项目竣工环保验收监测中的作用

阐述了建设项目竣工验收监测中公众意见调查的意义、特点、方法,以及公众意见调查在验收监测中的作用,指出公众意见调查在建设项目竣工环保验收监测中存在的问题是调查方法选择、公众环境意识局限性、公众代表性、公众意见调查内容设计、公众意见解决和落实,为此提出了改进建议.     

2012年全国环境空气质量新标准监测现场会在南京召开

2012年10月11日,由环保部组织的"空气质量新标准监测现场会暨启动大培训仪式"在南京顺利召开。环保部吴晓青副部长、万本太总工、监测司罗毅司长以及全国各省、自治区、直辖市环保局(厅)、监测站的负责同志参加了启动仪式。江苏省政府许津荣副省长到会致辞。     

城市空气质量周报效用分析

介绍了世界上一些发达国家的空气污染预报的做法和采取的措施,阐述了我国开展空气质量预报的方针和方法,指出了周报是预报的基础工作。叙述了我国空气质量周报的污染参数的选取、污染指数的分级及其浓度限值和污染指数计算及确定,分析并总结了开展城市空气质量周报所发挥的效用是提高公众的环保意识,加大了治理污染的力度,转变了环境监测的职能,促进了环境监测事业的发展     

锅炉烟尘测试中锅炉负荷率的计算方法探讨

GB5468 -91规定 ,锅炉烟尘测试时 ,必须对锅炉的运行负荷进行测试 ,而实际监测过程中 ,许多锅炉房不具备测试的计量条件 ,为了解决这一问题 ,文章提出利用烟气量和空气过剩系数计算锅炉负荷率。在实际监测工作中 ,该方法方便、易于操作 ,所得结果和标准规定方法所得结果有很好的一致性     

水中总硬度测量不确定度的评定

采用EDTA滴定法测定水质总硬度的测量不确定度评定。充分考虑测量重复性、标准溶液的配制、滴定等过程对测量的影响,计算水中总硬度的测量相对合成标准不确定度为1·81×10-3。     

“湖泛”恶臭物质分析及来源浅析

介绍了中国南方"湖泛"中的恶臭物质及检测情况,采用常规分析和气相色谱-质谱(GC-MS)对"湖泛"水样进行检测,认为"湖泛"恶臭物主要是氨和硫醚类物质。根据"湖泛"发生的时间及频次,结合南方地区农业水稻秧田的农药使用情况,推断氨基甲酸酯类农药的使用可能是"湖泛"发生的诱因。     

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8–156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.     

贵州黔东南州三板溪水库春季拟多甲藻水华特征

2011年3月13日对贵州省黔东南州三板溪水库进行春季浮游植物调查的结果表明,三板溪水库Ⅱ号采样点(下革东)发生以佩纳形拟多甲藻为优势种的拟多甲藻水华,细胞密度高达1.15×10⁷cell/L;板溪水库总氮的最低值为2.09 mg/L,总磷的最低值为0.95 mg/L,三板溪水库的总氮、总磷含量较丰富,不存在总氮或总磷是限制性因子;通过SPSS16.0统计软件分别进行Pearson 积距相关系数分析表明,氮磷比是三板溪水库发生拟多甲藻水华的主要影响原因。     

Evaluation of method of preparation of passive diffusion tubes for measurement of ambient nitrogen dioxide

This study was carried out in response to suggestions that the measurement of NO(2) by Palmes-type passive diffusion tubes (PDT) is affected by the method of preparation of the triethanolamine (TEA) absorbent coating on the grids. The following combinations of factors were investigated: TEA solvent (acetone or water), volume composition of TEA in solvent (50% or 20%), and grid coating method (dipping in solution prior to assembly or pipetting solution on after assembly). Duplicate PDTs prepared by each of the 8 methods were exposed in parallel, in urban air, for a total of 80 separate 1 week exposures. NO(2) concentrations derived from PDTs prepared by pipetting methods were significantly less precise than concentrations from dipping methods, with mean RSDs for duplicate measurements of 13.8% and 8.5%, respectively (n= 316 each category). Pipetting methods using solutions of 50% TEA composition were particularly imprecise (mean RSD 17.2%). Data from PDTs prepared by pipetting methods were systematically more poorly correlated with each other and with data from co-located chemiluminescence analysers, than corresponding data from PDTs prepared by dipping methods, indicating that more consistent accuracy was also obtained by the latter PDTs. The statistical evidence suggested that PDTs prepared by pipetting 50% TEA in water generally gave lower NO(2) concentrations. Although this is in agreement with a previous study, it is also possible that such an observation here may be a statistical artefact given the demonstrably poorer precision of this method. The general tendency of PDTs to show positive bias in NO(2) measurement in urban air in 1 week exposures was again evident in this study (mean biases at roadside and urban centre locations of +35% (n= 475) and +18% (n= 112), respectively) consistent with augmentation of within-tube NO(2) flux by chemical reaction between co-diffusing NO and O(3). Overall, it is recommended that the pipetting method of PDT grid preparation is avoided, or at least investigated further, because of the apparent degradation in precision and accuracy of NO(2) measurement. Potential reasons for the effect are discussed.     

实验室质量管理体系内部审核的实施

在实施GB/T15481-2000 idt ISO/IEC17025:1999标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核实施阶段的关键环节,提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法,对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

Environmental Assessment of the Impact of Ozone to the Neuston of the Sea-Surface Microlayer of the Gulf of Mexico

Substantial amounts of NOx (146 000 t/y) and total hydrocarbons (294 000 t/y) are released to the marine atmosphere by the large number of oil and gas operations over Federal waters of the Gulf of Mexico (GOM). Under appropriate meteorological conditions these emissions react to form ozone (0–54 g/m3 over-water) which can affect the marine environment. Using a dry deposition model, this work examines the amount of ozone derived from oil and gas offshore operations and deposited in the sea surface of the Gulf of Mexico, and assesses its impact on the neuston of the sea-surface microlayer. Surface integrated estimates of ozone deposited from oil and gas operations over the sea surface ranges from 400 kg to 1800 kg which results in sea surface concentrations of 15 g/m3. This estimate and the actual toxic ozone levels suggest no acute, toxic impacts to the neuston. However, indirect effects may occur through changes to the pelagic foodwebs and organic carbon pathways. Another potential pathway for ozone impacting the environment is through the production of bromate. Based on the concentrations and time scales (11–139 days) only sublethal effects appear to occur, but uncertainties associated with this assessment need to be further studied. From an ecological perspective, the environmental impacts and risks of NOx and VOC discharges from offshore platforms need to be assessed for neuston and other components of the marine ecosystem.     

实验室质量管理体系内部审核的策划

在实施GBT15481-2000(idtISOIEC17025:1999)标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核策划阶段的关键环节,提出审核范围确定、审核计划和抽样方案制订的技术方法,为有序高效地实施内部审核提供了行动指南。