氨法在燃煤电厂烟气治理中的应用和发展

燃煤排放的CO2、SO2、NOx等气态污染物会造成酸雨、温室效应、臭氧层破坏等一系列的大气环境问题。减少和抑制燃煤电厂燃烧过程中污染气体的排放,是实现清洁生产和能源可持续发展的基本需要。氨法烟气治理技术作为电厂排放烟气处理的新兴技术,以其污染物脱除效率高、耗能小、二次污染低、脱除副产品可资源化等特点,得到了越来越多的关注,并已在部分燃煤电厂得到成功的应用。对氨法脱除烟气中气态污染物技术进行了分析和总结,并对其应用前景进行了分析和预测,指出了氨法烟气治理技术在燃煤电厂烟气处理方面具有良好的经济、社会和环保效益,并具有广阔的发展前景。     

Simulation of the flue gas cleaning system of an RDF incineration power plant

Because of the stringent pollutant emission standards introduced with the European Union guidelines for waste incineration, it is very important to optimize the flue gas cleaning systems which are able to result in a low environmental impact according to the emission limits. In this paper a thermochemical model has been proposed for the simulation of the flue gas cleaning system of an RDF incineration plant. The model simulates the operation of the flue-gas treatment section and the combustion section by using a simplified approach. The combustion includes the grate incinerator and the post-combustion chamber, while the cleaning section includes the NO(x) reduction process (urea injection) and the scrubbing of SO(2) and HCl (Ca(OH)(2) as sorbent). The modelling has been conducted by means of ASPEN PLUS code. The simulation results have been validated with the operating data. The model proposed by the authors can be a useful tool in both evaluating the efficiency of the gas cleaning system by verifying the environmental pollution of an incinerator power plant in nominal operating conditions and in forecasting the efficiency of the cleaning system in off-design operating conditions.     

LCA to choose among alternative design solutions: The case study of a new Italian incineration line

At international level LCA is being increasingly used to objectively evaluate the performances of different Municipal Solid Waste (MSW) management solutions. One of the more important waste management options concerns MSW incineration. LCA is usually applied to existing incineration plants.In this study LCA methodology was applied to a new Italian incineration line, to facilitate the prediction, during the design phase, of its potential environmental impacts in terms of damage to human health, ecosystem quality and consumption of resources. The aim of the study was to analyse three different design alternatives: an incineration system with dry flue gas cleaning (without- and with-energy recovery) and one with wet flue gas cleaning. The last two technological solutions both incorporating facilities for energy recovery were compared. From the results of the study, the system with energy recovery and dry flue gas cleaning revealed lower environmental impacts in relation to the ecosystem quality.As LCA results are greatly affected by uncertainties of different types, the second part of the work provides for an uncertainty analysis aimed at detecting the extent output data from life cycle analysis are influenced by uncertainty of input data, and employs both qualitative (pedigree matrix) and quantitative methods (Monte Carlo analysis).     

Experimental study on flue gas purifying of MSW incineration using in-pipe jet adsorption techniques

This paper presents the experimental research process and results about flue gas purifying of municipal solid wastes (MSW) incineration using in-pipe jet adsorption techniques. MSW incineration was carried out in a fluidized bed test rig, and the flue gas purifying was carried out in an in-pipe jet adsorption test rig. The experimental results are as follows: when the feedstock of activated carbon is 1.6g/Nm(3), the desulfurization efficiency is 83%, the denitrification efficiency is 41%, and the dechlorination efficiency is 27%. The order of purifying effect of the three kinds of adsorbents on acidic gases from MSW incineration is activated carbon>activated bauxite>kaolin. Comparison of adsorption capabilities of the three kinds of adsorbents to heavy metals shows that activated carbon is the best additive to remove Cd, Pb and Cu, kaolin is inferior, and activated bauxite is the worst one. However, activated bauxite is the best additive to remove Hg, and it can remove Cd effectively. PAHs in fly ash are dominated by three-, four-, and five-ringed PAHs, and PAHs in the flue gas mainly include three- and four-ringed PAHs. When the injected quantity of additive is constant, the order of cleaning effect on PAHs is kaolin>activated carbon>activated bauxite. These three kinds of adsorbents have different purifying effects on acidic gases, heavy metals and PAHs in the flue gas from MSW incineration. In general, activated carbon has a better adsorption capability.     

发达国家垃圾焚烧发电经验及借鉴

介绍了发达国家垃圾焚烧发电技术,其具有较好的社会、环境和经济效益,提出我国应借鉴发达国家经验,从技术、管理、政策方面加强垃圾焚烧发电工作。     

流化床富氧焚烧含油污泥技术经济性分析

介绍了流化床富氧焚烧含油污泥技术的流程和优势,计算了富氧焚烧含油污泥系统主要设备的电耗和技术经济指标。流化床富氧焚烧含油污泥技术可实现烟气及其他污染物零排放,产生的蒸汽可直接供应油田生产和生活使用,产生的液态CO2可直接用于油井驱油,烟气中的SO2和NOx可转化为硫酸和硝酸。采用日处理200 t含油污泥的流化床锅炉年处理含油污泥量约73 kt,每年减少排污费7 300万元;锅炉年产蒸汽量约177 kt,每年节约蒸汽费用1 380.6万元,合计每年节约成本8 680.6万元。回收得到质量分数为40%的稀硫酸5.56 t/d,质量分数为37%的硝酸0.708 t/d,年回收CO2约99 kt。     

烟气脱硫脱硝一体化技术的研究进展

煤炭资源作为现阶段我国的主要资源,所造成的环境问题日益严重。随着我国对环境问题的不断重视,烟气脱硫、脱硝催化剂的研究也在不断的发展。总结了目前应用较为广泛的脱硫脱硝一体化技术,并展望活性炭用于烟气脱硫脱硝一体化的发展前景。     

Effects of flue gas composition on the catalytic destruction of chlorinated aromatic compounds with a V-oxide catalyst

When using catalytic flue gas cleaning, several flue gas compounds may influence oxidation reactions of hazardous volatile organic compounds, possibly leading to lower reaction rates and, thus, to an incomplete destruction. Experimental investigations were performed with regard to the influence of selected flue gas compounds, like hydrogen chloride, sulfur dioxide, oxygen, and water vapour, on the catalytic destruction behavior of chlorobenzenes under flue gas cleaning conditions of an incineration plant. For this purpose, a metal oxide catalyst was operated at different temperatures at a space velocity of 3600 h-1 in a laboratory-scale fixed bed reactor with model flue gases, and with real flue gases generated from the TAMARA waste incineration plant. The results obtained from the studies with model flue gas were analyzed with respect to reaction kinetics. These kinetics were applied for comparison with the experimental data gained in the real flue gas.     

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.     

Economic assessment and energy model scenarios of municipal solid waste incineration and gas turbine hybrid dual-fueled cycles in Thailand

Finding environmentally benign methods related to sound municipal solid waste (MSW) management is of highest priority in Southeast Asia. It is very important to study new approaches which can reduce waste generation and simultaneously enhance energy recovery. One concrete example of particular significance is the concept of hybrid dual-fuel power plants featuring MSW and another high-quality fuel like natural gas. The hybrid dual-fuel cycles provide significantly higher electrical efficiencies than a composite of separate single-fuel power plant (standalone gas turbine combined cycle and MSW incineration). Although hybrid versions are of great importance for energy conversion from MSW, an economic assessment of these systems must be addressed for a realistic appraisal of these technologies. This paper aims to further examine an economic assessment and energy model analysis of different conversion technologies. Energy models are developed to further refine the expected potential of MSW incineration with regards to energy recovery and environmental issues. Results show that MSW incineration can play role for greenhouse gas reduction, energy recovery and waste management. In Bangkok, the electric power production via conventional incineration and hybrid power plants can cover 2.5% and 8% of total electricity consumption, respectively. The hybrid power plants have a relative short payback period (5 years) and can further reduce the CO₂ levels by 3% in comparison with current thermal power plants.     

Size distribution and number concentration of particles at the stack of a municipal waste incinerator

A large number of particles and gaseous products are generated by waste combustion processes. Of particular importance are the ultrafine particles (less than 0.1 microm in aerodynamic diameter) that are emitted in large quantities from all the combustion sources. Recent findings of toxicological and epidemiological studies indicate that fine and ultrafine particles could represent health and environmental risks. Quantifying particulate emissions from combustion sources is important: (i) to examine the source status in compliance with regulations; (ii) to create inventories of such emissions at local, regional and national levels, for developing appropriate management and control strategies in relation to air quality; (iii) to predict ambient air quality in the areas involved at the source and (iv) to perform source apportionment and exposure assessment for the human populations and/or ecological systems involved. In order to control and mitigate the particles in the view of health and environmental risk reduction, a good understanding of the relative and absolute contribution from the emission sources to the airborne concentrations is necessary. For these purposes, the concentration and size distribution of particles in terms of mass and number in a waste gas of a municipal waste incineration plant were measured in the stack gas. The mass concentrations obtained are well below the imposed daily threshold value for both incineration lines and the mass size distribution is on average very stable. The total number concentrations are between 1 x 10(5) and 2 x 10(5)particles/cm(3) and are on average relatively stable from one test to another. The measured values and the comparison with other point sources show a very low total number concentration of particles at the stack gas, revealing the importance of the flue gas treatment also for ultrafine particles. Also in respect to linear sources (high and light duty vehicles), the comparison shows a negligible emission in terms of the total number of particles.     

Energy recovery from solid waste fuels using advanced gasification technology

Since the mid-1980s, TPS Termiska Processer AB has been working on the development of an atmospheric-pressure gasification process. A major aim at the start of this work was the generation of fuel gas from indigenous fuels to Sweden (i.e. biomass). As the economic climate changed and awareness of the damage to the environment caused by the use of fossil fuels in power generation equipment increased, the aim of the development work at TPS was changed to applying the process to heat and power generation from feedstocks such as biomass and solid wastes. Compared with modern waste incineration with heat recovery, the gasification process will permit an increase in electricity output of up to 50%. The gasification process being developed is based on an atmospheric-pressure circulating fluidised bed gasifier coupled to a tar-cracking vessel. The gas produced from this process is then cooled and cleaned in conventional equipment. The energy-rich gas produced is clean enough to be fired in a gas boiler (and, in the longer term, in an engine or gas turbine) without requiring extensive flue gas cleaning, as is normally required in conventional waste incineration plants. Producing clean fuel gas in this manner, which facilitates the use of efficient gas-fired boilers, means that overall plant electrical efficiencies of close to 30% can be achieved. TPS has performed a considerable amount of pilot plant testing on waste fuels in their gasification/gas cleaning pilot plant in Sweden. Two gasifiers of TPS design have been in operation in Grève-in-Chianti, Italy since 1992. This plant processes 200 tonnes of RDF (refuse-derived fuel) per day. It is planned that the complete TPS gasification process (including the complete fuel gas cleaning system) be demonstrated in several gas turbine-based biomass-fuelled power generating plants in different parts of the world. It is the aim of TPS to prove, at commercial scale, the technical feasibility and economic advantages of the gasification process when it is applied to solid waste fuels. This aim shall be achieved, in the short-term, by employing the cold clean product gas in a gas boiler and, in the longer-term, by firing the gas in engines and gas turbines. A study for a 90 MWth waste-fuelled co-generation plant in Sweden has shown that, already today, gasification of solid waste can compete economically with conventional incineration technologies.     

烟气脱硝技术的研究

氮氧化物(NOx)的污染危害是一个不容忽视的问题.目前,我国燃煤电厂排放烟气的SO2治理已逐步走向正轨,新建的燃煤电厂基本都安装效率较高的脱硫装置.因此,控制NOx的排放将是下一步的主要任务.对选择性催化还原法(SCR)、非选择性催化还原法(SNCR)、电子束或电晕放电脱硝法、光催化氧化法等烟气中NOx控制技术的机理、现状、发展趋势和主要优缺点进行了详尽的论述.通过对各种工艺技术的脱除效率、应用条件、经济性等方面的分析、比较和总结,提出了未来脱硝技术研究工作的重点.基于我国的实际情况提出了烟气脱硝的可行方案,从而为工业废气脱硝技术的进一步开发和研究提供参考.     

Environmental impact assessment of the incineration of municipal solid waste with auxiliary coal in China

The environmental impacts of waste incineration with auxiliary coal were investigated using the life-cycle-based software, EASEWASTE, based on the municipal solid waste (MSW) management system in Shuozhou City. In the current system, MSW is collected, transported, and incinerated with 250kg of coal per ton of waste. Based on observed environmental impacts of incineration, fossil CO(2) and heavy metals were primary contributors to global warming and ecotoxicity in soil, respectively. Compared with incinerators using excess coal, incineration with adequate coal presents significant benefits in mitigating global warming, whereas incineration with a mass of coal can avoid more impacts to acidification, photochemical ozone and nutrient enrichment because of increased electricity substitution and reduced emission from coal power plants. The "Emission standard of air pollutants for thermal power plants (GB13223-2011)" implemented in 2012 introduced stricter policies on controlling SO(2) and NO(x) emissions from coal power plants. Thus, increased use of auxiliary coal during incineration yields fewer avoided impacts on acidification and nutrient enrichment. When two-thirds of ash is source-separated and landfilled, the incineration of rest-waste presents better results on global warming, acidification, nutrient enrichment, and even ecotoxicity in soil. This process is considered a promising solution for MSW management in Shuozhou City. Weighted normalized environmental impacts were assessed based on Chinese political reduction targets. Results indicate that heavy metal and acidic gas emissions should be given more attention in waste incineration. This study provides scientific support for the management of MSW systems dominated by incineration with auxiliary coal in China.     

“电改袋”技术在130t／h煤粉炉烟气除尘系统改造中的应用

介绍了“电改袋”除尘系统的工艺特征,分析了130t／h煤粉炉烟气除尘器系统改造为长袋低压脉冲袋式除尘器的技术方案。改造后,除尘器已经稳定运行1年多,各项技术指标均达到设计要求,环境效益与经济效益显著。     

垃圾焚烧中抑制二恶英二次生成的方法探讨

根据生活垃圾焚烧技术中二恶英的生成机理,余热锅炉的烟气在低温区急冷可以避免二恶英在低温区的再次合成,但目前在余热锅炉烟气低温区急冷是不可行的。提出一种从垃圾焚烧系统设计上进行烟气的急冷,从而抑制二恶英低温区二次生成的新方法。     

兴建垃圾电厂的基本原则

垃圾电厂是一种新兴的发电形式。根据垃圾电厂的特殊性和公益性原则，结合广东省的实例进行具体分析。兴建垃圾电厂与常规发电厂所遵循原则的区别主要体现在厂址选择、设备选择和工程造价等几方面，同时还应遵循国家环境保护标准，使垃圾电厂保持良性发展，争取达到经济效益与环境效益的统一。     

危险废物焚烧厂烟气净化工艺设计与探讨

参考国内外已有的危险废物焚烧工程相关设计和研究资料,针对国内具有代表性的危险废物成分,采用设计计算得到危险废物焚烧烟气的污染物初始浓度,分析成熟的烟气净化工艺,对适合中国危险废物特点的危险废物焚烧厂烟气净化工艺进行了设计和探讨,为危险废物焚烧厂建设单位及设计单位等提供参考。     

Feasibility of a monitoring system for detecting changes in dioxin concentrations of both in flue gas and fly ash in incineration plants

Surrogate measurements should be low in cost and quick to perform. To examine its feasibility, continuous surrogate monitoring was performed using an organic halogen compound (OHC) analyzer. Surrogates for dioxins (DXNs) from waste incinerators were examined by changing the operating conditions such as the atomized volume of activated carbon added and the temperature at the inlet of the dust collector. OHCs were measured along with DXNs in flue gas at the inlet and the outlet of the dust collector of two waste incinerators over five runs; the fly ash was sampled at the same time. Although the final flue gas concentration of DXNs at the incineration plants was below the regulation criteria, this does not mean complete reduction of DXNs. In addition, the de novo synthesis of DXNs inside the dust collectors was studied by analyzing the mass balance for DXNs concentrations in flue gas and fly ash. Semivolatile chlorinated organic compound concentrations at the outlet of the bag filter were basically well correlated with DXNs levels at the inlet of the bag filter in the test runs. When advanced flue gas treatment is applied by using a bag filter and lime/activated carbon adsorbent, DXNs that may be generated during flue gas cooling processes move to the fly ash, and this amount determines the mass balance of the entire system. It may be useful to monitor surrogate organic halogens for detecting changes in DXN concentrations of both flue gas and fly ash in incineration plants.     

氯磺酸的清洁生产工艺

在对氯磺酸原有工艺——低气浓法、高气浓法进行技术分析的基础上,设计建成了氯磺酸生产产量为150t／d的循环吸收合成法生产装置。该工艺的实施,可使排放尾气中污染物的浓度低于国家排放标准,二氧化硫的转化率达到98％,三氧化硫和氯化氢利用率分别比原来提高6％和1．5％,且经济效益与环境效益显著。