Investigation of the impacts of tunnel excavation on karst groundwater and dependent geo-environment using hydrological observation and numerical simulation: a case from karst anticline mountains of southeastern Sichuan Basin,China

Environmental Science and Pollution Research - Tunnel excavation has significant disturbance on groundwater system and related geo-environment, especially in karst regions like southwestern China....     

Occurrence, behavior and effects of nanoparticles in the environment

The increasing use of engineered nanoparticles (NP) in industrial and household applications will very likely lead to the release of such materials into the environment. Assessing the risks of these NP in the environment requires an understanding of their mobility, reactivity, ecotoxicity and persistency. This review presents an overview of the classes of NP relevant to the environment and summarizes their formation, emission, occurrence and fate in the environment. The engineered NP are thereby compared to natural products such as soot and organic colloids. To date only few quantitative analytical techniques for measuring NP in natural systems are available, which results in a serious lack of information about their occurrence in the environment. Results from ecotoxicological studies show that certain NP have effects on organisms under environmental conditions, though mostly at elevated concentrations. The next step towards an assessment of the risks of NP in the environment should therefore be to estimate the exposure to the different NP. It is also important to notice that most NP in technical applications are functionalized and therefore studies using pristine NP may not be relevant for assessing the behavior of the NP actually used.     

农业管理实践对除草剂环境行为的影响

除草剂的土壤环境行为与受人为控制的农业管理实践有密切的关系。本文通过文献调研综合分析了农田灌溉、耕作制度、施肥、作物秸秆还田和除草剂施用量等农业管理实践对除草剂土壤环境行为的影响 ,并据此提出了减轻除草剂污染地下水的若干思路。     

Losses to the environment from the multilevel cycle of anthropogenic lead

As a component of a multi-level study of the anthropogenic lead cycle for year 2000 (52 countries, 8 regions, and the planet), we have estimated the lead flows in seven emission streams: tailings, slag, fabrication and manufacturing, dissipation from use, hibernation, landfilling, and dispersion following product discard. For every 1 kg of lead put into end use, 0.5 kg is lost to the environment, largely due to landfilling and dissipation from use. From the standpoint of the receiving media, 1/3 of the losses are to uncontained solids on land and 48% of the losses are to containment facilities on land. On a country basis, the largest losses occur in the United States and China, which between them are responsible for about 32% of total global lead losses. On a per capita basis, the highest lead losses occurred in the United Kingdom, Belgium-Luxembourg, and Ireland.     

Revealing the impact of water conservancy projects and urbanization on hydrological cycle based on the distribution of hydrogen and oxygen isotopes in water

Environmental Science and Pollution Research - In recent years, the development and utilization of water resources have imposed great impacts on hydrological characteristics and ecological...     

Overexploitation of karst spring as a measure against water scarcity

Water scarcity, especially in the hydrologically critical part of the year, is a problem often present in many cities and regions, particularly in arid and sub-arid areas. Climate change and human water demand compound the problem. This paper discusses a climate change adaptation measure—the possibility of karst spring overexploitation, where there is a siphon-shaped cavity inside the mountain. The pilot area is near the city of Ni?, where a decreasing precipitation trend has already been observed and is expected to continue in the future. The paper also presents some basic information related to the pilot area and undertaken investigations. The project, successfully implemented in 2004, has provided the city of Ni? with an additional amount of 200 l/s of spring water during the most critical part of the year.     

Influence of hydrological regime on pore water metal concentrations in a contaminated sediment-derived soil

Options for wetland creation or restoration might be limited because of the presence of contaminants in the soil. The influence of hydrological management on the pore water concentrations of Cd, Cr, Cu, Fe, Mn, Ni and Zn in the upper soil layer of a contaminated overbank sedimentation zone was investigated in a greenhouse experiment. Flooding conditions led to increased Fe, Mn, Ni and Cr concentrations and decreased Cd, Cu and Zn concentrations in the pore water of the upper soil layer. Keeping the soil at field capacity resulted in a low pore water concentration of Fe, Mn and Ni while the Cd, Cu, Cr and Zn concentrations increased. Alternating hydrological conditions caused metal concentrations in the pore water to fluctuate. Formation and re-oxidation of small amounts of sulphides appeared dominant in determining the mobility of Cd, Cu, and to a lesser extent Zn, while Ni behaviour was consistent with Fe/Mn oxidation and reduction. These effects were strongly dependent on the duration of the flooded periods. The shorter the flooded periods, the better the metal concentrations could be linked to the mobility of Ca in the pore water, which is attributed to a fluctuating CO(2) pressure.     

Cadmium in naturally-occurring water hyacinths

Water hyacinth [$\text{Eichhornia}$$\text{crassipes}$ (Mart.) Solms] is an effective fertillizer, mulch, soil amendment and fodder for cattle and sheep. The consequences of the ability of the plant to accumulate heavy metals needs consideration. Small and large water hyacinth ecotypes collected from two “rural” rivers in Florida, the Peace and Withalachoochee respectively, were examined for an accumulation of cadmium from the natural environment. Less than trace amounts (below limits of detection, 2.5ppb) were present. Water hyacinths tested for cadmium accumulation under laboratory conditions exhibited a pronounced ability to absorb and accumulate the metal. The roots contained 0.982 mg of the 2.0 mg cadmium presented to the plant. The distribution of the metal within the plant was 76.7% in the roots, 22.4% in the stems with the remainder in the leaves. Of the total cadmium presented to the plant, 80.8 ± 3.0% was recovered by the plant after 7 days, the mean generation time of the plant. With increasing urbanization, accumulation of cadmium by water hyacinths exists. It is either an asset or a potential hazard and needs to be appreciated.     

Cadmium binding sites on cells of a marine pseudomonad

Enzymatic hydrolysis was used to determine some binding locations of cadmium on the cell wall of a sensitive marine pseudomonad. Metal was mainly bound to ionic material such as polygalacturonic acids, and to a lesser extent, to non ionic polymers such as cellulose and dextrans.     

Redox potential characterization and soil greenhouse gas concentration across a hydrological gradient in a Gulf coast forest

Soil redox potential (Eh), concentrations of oxygen (O2) and three greenhouse gases (CO2, CH4, and N2O) were measured in the soil profile of a coastal forest at ridge, transition, and swamp across a hydrological gradient. The results delineated a distinct boundary in soil Eh and O2 concentration between the ridge and swamp with essentially no overlap between the two locations. Critical soil Eh to initiate significant CH4 production under this field conditions was about +300 mV, much higher than in the homogenous soils (about -150 mV). The strength of CH4 source to the atmosphere was strong for the swamp, minor for the transition, and negligible or even negative (consumption) for the ridge. Maximum N2O concentration in the soils was found at about Eh +250 mV, and the soil N2O emission was estimated to account for less than 4% for the ridge and transition, and almost negligible for the swamp in the cumulative global warming potential (GWP) of these three gases. The dynamic nature of this study site in response to water table fluctuations across a hydrological gradient makes it an ideal model of impact of future sea level rise to coastal ecosystems. Soil carbon (C) sequestration potential due to increasing soil water content upon sea level rise and subsidence in this coastal forest was likely limited and temporal, and at the expense of increasing soil CH4 production and emission.     

Cadmium in soil solutions from a transect of soils away from a fertiliser bin

The effects of high inputs of phosphate fertiliser on Cd concentrations were studied in soil solutions extracted from topsoils. Soils were sampled along a transect at distances of 1-100 m away from a fertiliser bin. The transect was sampled four times during 1 year. Soil solutions were analysed for Cd, pH, major cations and anions, and other heavy metals (As, Cr, Cu, Pb). For one of the transect samplings, soil total Cd, Cr, Cu, Pb and P were also measured. Cd speciation in the soil solutions was calculated by the GEO-CHEM-PC computer program. Chemical composition varied substantially along the transect, and also between samplings, indicative of seasonal effects and the influence of a fresh application of superphosphate fertiliser during the year. Application of fertiliser decreased soil solution pH and increased the levels of heavy metals in soil solution. Generally, soil total Cd, Cr, Cu, Pb, and P decreased with increasing distance from the fertiliser bin. Correlations between P and the four heavy metals were: P and Cd (R2 = 0.978), P and Cr (R2 = 0.712), P and Pb (R2 = 0.538), P and Cu (R2 = 0.267). Less than 1% of the total Cd in the soil samples was found in the soil solution. The free metal ion Cd2+ accounted for 55-90% of solution Cd. Of the complexed species of Cd, the chloride and sulphate complexes were usually the most important, even when nitrate and phosphate concentrations were relatively high. The presence of As, Cr, Cu and Pb had no effect on Cd speciation.     

An exploratory analysis comparing a stochastic driving cycle to California's regulatory cycle

As the fundamental building block of the emissions estimation process, a driving cycle needs to be representative of real-world driving behavior. The driving cycle construction method becomes crucial for generating a representative driving cycle. In this paper, we revisit the Unified Cycle's (i.e., the LA92 driving cycle) construction method. The California Air Resources Board's Unified Cycle used a “microtrips” approach, a speed–acceleration frequency distribution plot, and a quasi-random selection mechanism to build the driving cycle. There is concern that the Unified Cycle does not reflect the true driving patterns due to the identified flaws in the construction methodology. Treating a driving trace as a stochastic process, we construct a new driving cycle (LA01) with the same driving data originally used to build the Unified Cycle. We then compare the two driving cycles with the sample data set with respect to the durations and intensities of the modal events. The new driving cycle is found to better replicate the modal events observed in the sample data. A comparison of average road power values between the sample data, LA01, and the Unified Cycle also confirms the effect of fine-scale driving on emissions. These differences result from the different construction approaches and can be expected to affect emissions inventory estimation.     

Life cycle of PCBs and contamination of the environment and of food products from animal origin

This report gives a summary of the historic use, former management and current release of polychlorinated biphenyls (PCBs) in Germany and assesses the impact of the life cycle of PCBs on the contamination of the environment and of food products of animal origin. In Germany 60,000 t of PCBs were used in transformers, capacitors or as hydraulic oils. The use of PCB oils in these “closed applications”, has been banned in Germany in 2000. Thirty to 50% of these PCBs were not appropriately managed. In West Germany, 24,000 t of PCBs were used in open applications, mainly as additive (plasticiser, flame retardant) in sealants and paints in buildings and other construction. The continued use in open applications has not been banned, and in 2013, an estimated more than 12,000 t of PCBs were still present in buildings and other constructions. These open PCB applications continuously emit PCBs into the environment with an estimated release of 7–12 t per year. This amount is in agreement with deposition measurements (estimated to 18 t) and emission estimates for Switzerland. The atmospheric PCB releases still have an relevant impact on vegetation and livestock feed. In addition, PCBs in open applications on farms are still a sources of contamination for farmed animals. Furthermore, the historic production, use, recycling and disposal of PCBs have contaminated soils along the lifecycle. This legacy of contaminated soils and contaminated feed, individually or collectively, can lead to exceedance of maximum levels in food products from animals. In beef and chicken, soil levels of 5 ng PCB-TEQ/kg and for chicken with high soil exposure even 2 ng PCB-TEQ/kg can lead to exceedance of EU limits in meat and eggs. Areas at and around industries having produced or used or managed PCBs, or facilities and areas where PCBs were disposed need to be assessed in respect to potential contamination of food-producing animals. For a large share of impacted land, management measures applicable on farm level might be sufficient to continue with food production. Open PCB applications need to be inventoried and better managed. Other persistent and toxic chemicals used as alternatives to PCBs, e.g. short chain chlorinated paraffins (SCCPs), should be assessed in the life cycle for exposure of food-producing animals and humans.     

Cadmium exposure from the cement dust emissions: a field study in a rural residence

The cement dust is one of the causes of pollution in the environment. In the present study, the cadmium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions were determined and also the blood concentrations and sensitivity conditions in humans residing in this rural area were investigated. The 108 soil (36 for control) and plant specimens were collected from eight different directions of the cement plant located in Cukurhisar town in Eski?ehir city. Blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The results show that the cadmium concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analysis of venous blood samples showed that cadmium concentrations were found to be within the reference values given for both groups, but higher in the subjects (p<0.001). According to the results of patch tests, sensitivity to cadmium was found to be more frequent for the subject group than the control group (p<0.05). Those results show that, although clinical tools revealed no toxic effects for the subject, except contact dermatitis, the cement plant increases cadmium pollution on the surrounding environment.     

Cadmium tolerance in six poplar species

Selection of poplar species with greater Cd tolerance and exploiting the physiological mechanisms involved in Cd tolerance are crucial for application of these species to phyto-remediation. The aim of this study is to investigate variation in Cd tolerance among the six poplar species and its underlying physiological mechanisms. Cuttings of six Populus species were cultivated for 10 weeks before exposure to either 0 or 200 μM CdSO₄ for 20 days. Gas exchange in mature leaves was determined by a portable photosynthesis system. Cd concentrations in tissues were analyzed by a flame atomic absorbance spectrometry. Subsequently, Cd amount per plant, bio-concentration factor (BCF) and translocation factor (T _f) were calculated. Nonenzymatic compounds and activities of antioxidative enzymes in tissues were analyzed spectrophotometrically. Cd exposure caused decline in photosynthesis in four poplar species including Populus cathayana (zhonghua 1). Among the six species, P. cathayana (zhonghua 1) displayed the highest Cd concentrations in tissues, the largest Cd amount in aerial parts, the highest BCF in aerial parts and T _f under Cd exposure. Under Cd stress, increases in total soluble sugars in roots but decreases in starch in roots, wood, and leaves of P. cathayana (zhonghua 1) were found. Induced O ₂ ^?? and H₂O₂ production in roots and leaves, and increases in free proline, soluble phenolics, and activities of antioxidative enzymes were observed in P. cathayana (zhonghua 1). Based on results of this pot experiment, it is concluded that P. cathayana (zhonghua 1) is superior to other five species for Cd phyto-remediation, and its well-coordinated physiological changes under Cd exposure confer the great Cd tolerance of this species.     

Riboflavin-photosensitized degradation of atrazine in a freshwater environment

The effect of the photosensitizer riboflavin (0, 10, 50, 100 microM) on the fate of atrazine (10 mg/l) in a freshwater environment was studied. It was found that at 100 microM riboflavin significantly enhanced the degradation of atrazine and more than 80% of atrazine in a natural water environment was depleted in 72 h. The relative contribution of microbial assemblages and the freshwater matrix to the degradation of atrazine and the degradation kinetics of atrazine were compared under different experimental conditions. The products and pathways of atrazine transformation were studied with GC-MS and HPLC with a photodiode array detector. The results show that dealkylation and alkyl chain oxidation are involved in the degradation of atrazine.     

Cadmium speciation and accumulation in periphyton in a small stream with dynamic concentration variations

Accumulation of cadmium in periphyton was investigated under field conditions while Cd concentration and speciation were dynamically varying in a small stream during rain events. Speciation in water was determined in situ by diffusion gradient in thin-films (DGT) and by modeling of complexation with fulvic acids. During the rain events, dissolved Cd concentrations increased from 0.17 nM to 0.27-0.36 nM, and 70-97% were DGT-labile. Cd content in periphyton closely followed Cd concentrations in water, despite higher concentrations of Zn and Mn, and may be controlled by either free or DGT-labile Cd concentrations. Decrease of Cd content in periphyton after the rain events was slower than the decrease of Cd concentration in water. Concentrations of Zn, Mn, Cu, Pb and Fe in periphyton also followed the dynamic variations of metal concentrations in water. Repeated exposure of periphyton to elevated dissolved Cd may lead to Cd accumulation.     

Accumulated sediments in a detention basin: chemical and microbial hazard assessment linked to hydrological processes

Accumulated sediments in a 32,000-m³ detention basin linked to a separate stormwater system were characterized in order to infer their health hazards. A sampling scheme of 15 points was defined according to the hydrological behaviour of the basin. Physical parameters (particle size and volatile organic matter content) were in the range of those previously reported for stormwater sediments. Chemical analyses on hydrocarbons, PAHs, PCBs and heavy metals showed high pollutant concentrations. Microbiological analyses of these points highlighted the presence of faecal indicator bacteria (Escherichia coli and intestinal enterococci) and actinomycetes of the genus Nocardia. These are indicative of the presence of human pathogens. E. coli and enterococcal numbers in the sediments were higher at the proximity of the low-flow gutter receiving waters from the catchment. These bacteria appeared to persist over time among urban sediments. Samples highly contaminated by hydrocarbons were also shown to be heavily contaminated by these bacteria. These results demonstrated for the first time the presence of Nocardial actinomycetes in such an urban context with concentrations as high as 11,400 cfu g^?1.