Propagation and extinction of dust flames in narrow channels

This article has investigated the propagation and extinction of aluminum dust cloud flame in a narrow channel. The burned and burning dust particles act as heat sources and the channel walls act as heat sinks. In this method, discrete heat source has been used to analyze dust combustion in a narrow channel. Using the superposition of sources and sinks, the preheat zone temperature is predicted as an indicator of flame propagation or extinction. Dust concentration and channel width are two major parameters which affect the quenching distance and flame propagating speed. Wall temperature affects the heat loss; and by preheating the walls, quenching distance is reduced and flame propagation speed is increased.     

Effects of multiple annular obstacles on flame propagation of local corn starch dust in a vertical pipe

With high-speed camera technology, the propagation behavior of explosion flame for the local dust cloud of corn starch in a semi-open vertical pipe under the action of the annular obstacle was studied experimentally, and the blockage rate and the annular obstacle numbers as well as impact of dust cloud concentration on the flame propagation were investigated. The researches showed that both the blockage rate and the annular obstacle numbers have significant effects on the flame speed and propagation process for the dust cloud explosion of corn starch. The increase of the blockage rate of such annular obstacles will cause that the combustion of dust cloud with high concentration is mainly concentrated in the lower part of the pipe. The increase of the annular obstacle numbers will lead to the acceleration of combustion of the dust cloud. With the increase of the blockage rate and the annular obstacle numbers, the maximum flame speed shows a trend of the first increasing and then decreasing, and the phenomenon of accelerated propagation of the flame becomes more and more obvious, however, the distance of continuous acceleration for the flame is gradually decreased and the maximum flame speed is farther from the outlet of the pipe. Under the action of such annular obstacles, the concentration of dust cloud has a significant effect on the flame speed and shape of the dust cloud of the corn starch. The increase of the concentration of the dust cloud will decrease the acceleration effect of such annular obstacles to result in maximum flame speed showing a trend of the first increasing and then decreasing. However, the acceleration distance of the flame is longer, and the maximum flame speed is closer to the outlet of the pipe. The increasing concentration will make the flame speed develop more slowly, the flame color will be darker, and the flame segmentation phenomenon will be more obvious.     

Flame propagation behaviors of nano- and micro-scale PMMA dust explosions

Flame propagation behaviors of nano- and micro-polymethyl methacrylate (PMMA) dust explosions were experimentally studied in the open-space dust explosion apparatus. High-speed photography with normal and microscopic lenses were used to record the particle combustion behaviors and flame microstructures. Simple physical models were developed to explore the flame propagation mechanisms. High-speed photographs showed two distinct flame propagation behaviors of nano- and micro-PMMA dust explosions. For nano-particles, flame was characterized by a regular spherical shape and spatially continuous combustion structure combined with a number of luminous spot flames. The flame propagation mechanism was similar to that of a premixed gas flame coupled with solid surface combustion of the agglomerates. In comparison, for micro-particles, flame was characterized by clusters of flames and the irregular flame front, which was inferred to be composed of the diffusion flame accompanying the local premixed flame. It was indicated that smaller particles maintained the leading part of the propagating flame and governed the combustion process of PMMA dust clouds. Increasing the mass densities from 105 g/m³ to 217 g/m³ for 100 nm PMMA particles, and from 72 g/m³ to 170 g/m³ for 30 μm PMMA particles, the flame luminous intensity, scale and the average propagation velocity were enhanced. Besides, the flame front became more irregular for 30 μm PMMA dust clouds.     

Effect of flame propagation regime on pressure evolution of nano and micron PMMA dust explosions

Experiments using an open space dust explosion apparatus and a standard 20 L explosion apparatus on nano and micron polymethyl methacrylate dust explosions were conducted to reveal the differences in flame and pressure evolutions. Then the effect of combustion and flame propagation regimes on the explosion overpressure characteristics was discussed. The results showed that the flame propagation behavior, flame temperature distribution and ion current distribution all demonstrated the different flame structures for nano and micron dust explosions. The combustion and flame propagation of 100 nm and 30 μm PMMA dust clouds were mainly controlled by the heat transfer efficiency between the particles and external heat sources. Compared with the cluster diffusion dominant combustion of 30 μm dust flame, the premixed-gas dominant combustion of 100 nm dust flame determined a quicker pyrolysis and combustion reaction rate, a faster flame propagation velocity, a stronger combustion reaction intensity, a quicker heat release rate and a higher amount of released reaction heat, which resulted in an earlier pressure rise, a larger maximum overpressure and a higher explosion hazard class. The complex combustion and propagation regime of agglomerated particles strongly influenced the nano flame propagation and explosion pressure evolution characteristics, and limited the maximum overpressure.     

Experimental investigation on explosion flame propagation of wood dust in a semi-closed tube

In order to explore flame propagation characteristics during wood dust explosions in a semi-closed tube, a high-speed camera, a thermal infrared imaging device and a pressure sensor were used in the study. Poplar dusts with different particle size distributions (0–50, 50–96 and 96–180 μm) were respectively placed in a Hartmann tube to mimic dust cloud explosions, and flame propagation behaviors such as flame propagation velocity, flame temperature and explosion pressure were detected and analyzed. According to the changes of flame shapes, flame propagations in wood dust explosions were divided into three stages including ignition, vertical propagation and free diffusion. Flame propagations for the two smaller particles were dominated by homogeneous combustion, while flame propagation for the largest particles was controlled by heterogeneous combustion, which had been confirmed by individual Damköhler number. All flame propagation velocities for different groups of wood particles in dust explosions were increased at first and then decreased with the augmentation of mass concentration. Flame temperatures and explosion pressures were almost similarly changed. Dust explosions in 50–96 μm wood particles were more intense than in the other two particles, of which the most severe explosion appeared at a mass concentration of 750 g/m³. Meanwhile, flame propagation velocity, flame propagation temperature and explosion pressure reached to the maximum values of 10.45 m/s, 1373 °C and 0.41 MPa. In addition, sensitive concentrations corresponding to the three groups of particles from small to large were 500, 750 and 1000 g/m³, separately, indicating that sensitive concentration in dust explosions of wood particles was elevated with the increase of particle size. Taken together, the finding demonstrated that particle size and mass concentration of wood dusts affected the occurrence and severity of dust explosions, which could provide guidance and reference for the identification, assessment and industrial safety management of wood dust explosions.     

Flame propagation mechanisms in dust explosions

To reveal the effects of particle characteristics, including particle thermal characteristics and size distributions, on flame propagation mechanisms during dust explosions clearly, the flame structures of dust clouds formed by different materials and particle size distributions were recorded using an approach combining high-speed photography and a band-pass filter. Two obviously different flame propagation mechanisms were observed in the experiments: kinetics-controlled regime and devolatilization-controlled regime. Kinetics-controlled regime was characterized by a regular shape and spatially continuous combustion zone structure, which was similar to the premixed gas explosions. On the contrary, devolatilization-controlled regime was characterized by a complicated structure that exhibited heterogeneous combustion characteristics, discrete blue luminous spots appeared surrounding the yellow luminous zone. It was also demonstrated experimentally that the flame propagation mechanisms transited from kinetics-controlled to devolatilization-controlled while decreasing the volatility of the materials or increasing the size of the particles. Damköhler number was defined as the ratio of the heating and devolatilization characteristic time to the combustion reaction characteristic time, to reflect the transition of flame propagation mechanisms in dust explosions. It was found that the kinetics-controlled regime and devolatilization-controlled regime can be categorized by whether Damköhler number was less than 1 or larger than 1.     

Detailed analysis of flame propagation during dust explosions by UV band observations

It is important to sufficiently understand the phenomena during the dust explosions in order to take appropriate measures preventing dust explosion accidents. However, at present basic knowledge on flame propagation mechanisms during dust explosions is not enough. In this study, therefore, the flame propagation mechanisms during dust explosions are examined by detailed analyses using a special observation at UV band. Small scale experiments were performed to analyze flame propagating processes in detail. In the experiments, the stearic acid was used as the combustible particle, suspended particles were ignited by an electric spark, and flame propagation through the combustible dust was observed by using a special observation system at UV band. The leading combustion zone is observed to consist of discrete burning blue spot flames by the observation using ordinary photograph system. It is questionable how the leading flame of such discrete structure propagates. In this study, high-speed video images at UV band through a band-pass filter were taken to detect OH emission from combustion reaction zone. Using this method, the propagating flame could be detected clearly and the flame propagation mechanism could be examined in detail. In the conditions performed in this study, discrete flame propagation was not observed and the leading flame was observed to propagate continuously. This result is of importance for understanding the flame propagation phenomena during dust explosion.     

直线管道煤尘爆炸火焰传播规律的试验研究

为提供煤尘爆炸事故预防和缓解所需的科学依据,对煤尘爆炸火焰传播过程进行试验研究。所用试验装置,其主要部分为直径0.3 m的圆形管道与断面边长为80 mm的方形管道对接形成的一个长2 m的爆炸腔体。在其中共进行9次煤尘爆炸试验。结果表明,煤尘爆炸火焰传播具有速度快,波动大,稳定性较差的特点,火焰区长度远大于扬尘区长度,最大火焰速度和传播距离与煤尘量均不存在正比例关系,但存在一个特定的煤尘质量浓度。在这个特定质量浓度处,最大火焰速度达到最大值。当煤尘质量浓度大于这个特定质量浓度时,火焰传播速度曲线整体下降,暂时缺氧被认为是导致这一情况的重要因素。     

Structure of flames propagating through aluminum particles cloud and combustion process of particles

Structure of flames propagating through aluminum particles clouds and combustion processes of the particles have been examined experimentally to understand the fundamental behavior of a metal dust explosion. The combustion process of individual aluminum particles in a flame propagating through the aluminum particles cloud has been recorded by using a high-speed video camera with a microscopic optical system, and analyzed. The flame is shown to be consisted of a preheat zone of about 3 mm thick, followed by a combustion zone of 5–7 mm thick. In the combustion zone, discrete gas phase flames are observed around each aluminum particle. Also an asymmetric flame around a particle is observed, which might be caused by an ejection of aluminum vapor from a crack of oxide shell surrounding the particle.     

Inerting characteristics of ultrafine Mg(OH)2 on starch dust explosion flame propagation

Experiments on the flame propagation of starch dust explosion with the participation of ultrafine Mg(OH)₂ in a vertical duct were conducted to reveal the inerting evolution of explosion processes. Combining the dynamic behaviors of flame propagation, the formation law of gaseous combustion products, and the heat dissipation features of solid inert particles, the inerting mechanism of explosion flame propagation is discussed. Results indicate that the ultrafine of Mg(OH)₂ powders can cause the agglomeration of suspended dust clouds, which makes the flame combustion reaction zone fragmented and forms multiple small flame regions. The flame reaction zone presents non-homogeneous insufficient combustion, which leads to the obstruction of the explosion flame propagation process and the obvious pulsation propagation phenomenon. As the proportion of ultrafine Mg(OH)₂ increases, flame speed, flame luminescence intensity, flame temperature and deflagration pressure all show different degrees of inerting behavior. The addition of ultrafine Mg(OH)₂ not only causes partial inerting on the explosion flame, but also the heat dissipation of solid inert particles affects the acceleration of its propagation. The explosion flame propagation is inhibited by the synergistic effect of inert gas-solid phase, which attenuates the risk of starch explosion. The gas-solid synergistic inerting mechanism of starch explosion flame propagation by ultrafine Mg(OH)₂ is further revealed.     

预混乙炔-空气爆燃火焰在平板狭缝中传播与熄灭的实验研究

通过对预混乙炔-空气爆燃火焰在平板狭缝中的传播与熄灭过程进行试验研究,分析临界火焰传播速度、狭缝高度和熄灭长度之间的关系。实验结果表明,当狭缝高度一定时,临界火焰传播速度越大,熄灭长度越大,熄灭长度与临界火焰传播速度近似呈正比例关系。在相同的临界火焰传播速度条件下,随着狭缝高度的增加,熄灭长度值迅速增大,说明狭缝高度对预混火焰的传播与熄灭有显著影响。     

Radiation heat transfer in transient dust cloud flame propagation

This study investigates the impact of radiation heat transfer and heat conduction on dust cloud combustion. Radiation plays a very important role in the stability of dust cloud flame, and increasing the amount of radiation drastically raises the possibility of instability and explosion in a dust cloud mixture. Flame speed, which is a function of mixture characteristics, can exhibit a fluctuating behavior. By using the discrete heat source method, it would be possible to study the transient propagation of dust flames. Thus, the propagation speed of flame can be obtained, and as time goes by, the transient speed of dust flame will reach its steady state value. By considering the radiation effect, better agreement is observed between the obtained results and experimental data.     

乙炔-空气预混火焰在狭窄通道中的传播与熄灭

针对预混火焰在狭窄通道中传播过程的研究是进行阻隔防爆技术研发的基础。本文首先通过数值计算模拟了预混乙炔一空气爆燃火焰在狭窄通道中的传播与熄灭过程,然后采用高速数字摄像技术对火焰的传播过程进行捕捉,分析临界火焰传播速度、狭缝高度和熄灭长度之间的关系。研究结果均表明,当狭缝高度一定时,临界火焰传播速度越大,熄灭长度越大,熄灭长度与临界火焰传播速度近似呈正比例关系。在相同的临界火焰传播速度条件下,随着狭缝高度的增加,熄灭长度值迅速增大,说明狭缝高度对预混火焰的传播与熄灭有显著影响。本文研究成果将可为工业阻火防爆装置的设计和实际应用提供参考依据。     

Flame propagation in hybrid mixture of coal dust and methane

To investigate the flame propagation through hybrid mixture of coal dust and methane in a combustion chamber, a high-speed video camera with a microscopic lens and a Schlieren optical system were used to record the flame propagation process and to obtain the direct light emission photographs. Flame temperature was detected by a fine thermocouple. The suspended coal dust in the mixture of methane and air was ignited by an electric spark. The flame propagation speeds and maximum flame temperatures of the mixture were analyzed. The results show that the co-presence of coal dust and methane improves the flame propagation speed and maximum flame temperature notably, which become much higher than that of the single-coal dust flame. The flame front temperature varies with the coal dust concentration.     

Temperature profile across the combustion zone propagating through an iron particle cloud

Knowledge of the mechanism of combustion zone propagation during dust explosion is of great importance to prevent damage caused by accidental dust explosions. In this study, the temperature profile across the combustion zone propagating through an iron particle cloud is measured experimentally by a thermocouple to elucidate the propagation mechanism. The measured temperature starts to increase slowly at a position about 5 mm ahead of the leading edge of the combustion zone, increases quickly at a position about 3 mm ahead of the leading edge, reaches a maximum value near the end of the combustion zone, and then decreases. As the iron particle concentration increases, the maximum temperature increases at lower concentration, takes a maximum value, and then decreases at higher concentration. The relation between the propagation velocity of the combustion zone and the maximum temperature is also examined. It is found that the propagation velocity has a linear relationship with the maximum temperature. This result suggests that the conductive heat transfer is dominant in the propagation process of the combustion zone through an iron particle cloud.     

铝粉尘云燃烧火焰形态分析实验研究

为探索铝粉尘云燃烧火焰形态和灾变演化,基于改造的竖直开口实验管道,借助高速摄像仪和离子探针,研究火焰结构及变化,分析粒径因素对铝粉火焰前锋形态的影响。实验结果表明:铝粉燃烧能量的释放和空间束缚使燃烧转为爆燃,火焰前锋下方存在大片的燃烧反应区;铝粉粒径越小,颗粒氧化层破裂需要的热应力越小,越容易被点燃;随着铝粉粒径减小,热膨胀对火焰传播速度的影响明显增强。     

Quantifying the effect of strong ignition sources on particle preconditioning and distribution in the 20-L chamber

Computational fluid dynamics is used to investigate the preconditioning aspect of overdriving in dust explosion testing. The results show that preconditioning alters both the particle temperature and distribution prior to flame propagation in the 20-L chamber. A parametric study gives the fluid pressure and temperature, and particle temperature and concentration at an assumed flame kernel development time (10 ms) for varying ignitor size and particle diameter. For the 10 kJ ignitor with 50% efficiency, polyethylene particles under 50 μm reach 400 K and may melt prior to flame propagation. Gases from the ignitor detonation displace the dust from the center of the chamber and may increase local particle concentration up to two times the nominal value being tested. These effects have important implications for explosive testing of dusts in the 20-L chamber and comparing to larger 1-m³ testing, where these effects may be negligible.     

Effects of particle characteristics on flame propagation behavior during organic dust explosions in a half-closed chamber

To reveal the effects of particle characteristics on the mechanisms of flame propagation during organic dust explosions clearly, three long chain monobasic alcohols which are solids at room temperature and have similar physical–chemical properties were chosen to carry out experiments in a half-closed small chamber. A high-speed video camera was used to record the flame propagation process and to obtain the direct light emission photographs. Flame temperature was detected by a fine thermocouple. Based on the experimental results above, analysis was conducted on flame propagation characteristics and temperature profiles of organic particle cloud. As a result, it was found that the particle materials, especially volatility, strongly affected the flame propagation behavior. Particle concentration also affects the combustion zone propagation process significantly. With increasing the particle concentration, the maximum temperature of the combustion zone increases at the lower concentration, reaches a maximum value, and then decreases at the higher concentration. The propagation velocity of the combustion zone has a linear relationship with the maximum temperature, which implies conductive heat transfer is dominant in the flame propagation process of the three different volatile dusts.