NONPOINT SOURCE POLLUTION POTENTIAL IN AN AGRICULTURAL WATERSHED IN NORTHWESTERN PENNSYLVANIA1

ABSTRACT: A 155,947 ha portion of the Shenango River watershed in western Pennsylvania was evaluated as to the potential impact of agriculture drainage on water quality. Approximately a third of the area is being used as either cropland or pasture with approximately an equal percentage in forest lands. Eleven subwatersheds were evaluated as to their potential for nonpoint source pollution according to the criteria established by the Pennsylvania Department of Environmental Resources for the Chesapeake Bay Pollution Abatement Program. The individual components and overall rating for each subwatershed were then evaluated as to their correlation with four water quality variables based on 104 samples collected at 26 sampling stations throughout the watershed. There was a significant correlation between the overall rating factor for each subwatershed and each of the four water quality variables. In general, the watershed delivery factor, animal nutrient factor, and management factors were correlated with fecal coliform and phosphorus in the receiving streams, whereas the ground water delivery factor appeared to be more important in determining nitrate concentrations in these streams. These results indicate that manure and nutrient management, along with the exclusion of livestock from streams and the enhancement and/or replacement of riparian wetlands, are important approaches in reducing agricultural impacts in fresh water ecosystems.     

A MODEL TO ENHANCE WETLAND DESIGN AND OPTIMIZE NONPOINT SOURCE POLLUTION CONTROL1

ABSTRACT: A dynamic, compartmental, simulation model (WETLAND) was developed for the design and evaluation of constructed wetlands to optimize nonpoint source (NPS) pollution control. The model simulates the hydrologic, nitrogen, carbon, dissolved oxygen (DO), bacteria, vegetative, phosphorous, and sediment cycles of a wetland system. Written in Fortran 77, the WETLAND models both free‐water surface (FWS) and subsurface flow (SSF) wetlands, and is designed in a modular manner that gives the user the flexibility to decide which cycles and processes to model. WETLAND differs from many existing wetland models in that the interactions between the different nutrient cycles are modeled, minimizing the number of assumptions concerning wetland processes. It also directly links microbial growth and death to the consumption and transformations of nutrients in the wetland system. The WETLAND model is intended to be utilized with an existing NPS hydro‐logic simulation model, such as ANSWERS or BASINS, but also may be used in situations where measured input data to the wetland are available. The model was calibrated and validated using limited data from a FWS wetland located at Benton, Kentucky. The WETLAND predictions were not statistically different from measured values for of five‐day biochemical oxygen demand (BOD₅), suspended sediment, nitrogen, and phosphorous. Effluent DO predictions were not always consistent with measured concentrations. A sensitivity analysis indicated the most significant input parameters to the model were those that directly affected bacterial growth and DO uptake and movement. The model was used to design a hypothetical constructed wetland in a subwatershed of the Nomini Creek watershed, located in Virginia. Two‐year simulations were completed for five separate wetland designs. Predicted percent reductions in BOD₅ (4 to 45 percent), total suspended solids (85 to 100 percent), total nitrogen (42 to 56 percent), and total phosphorous (38 to 57 percent) were similar to levels reported by previous research.     

RURAL NONPOINT SOURCE POLLUTION CONTROL IN WISCONSIN: THE LIMITS OF A VOLUNTARY PROGRAM?1

ABSTRACT: This paper examines the relationship between best-management practices, institutional needs, and improved water quality within the watersheds of Wisconsin's program for controlling rural nonpoint source pollution. The first section describes the federal requirements for state nonpoint source programs and the legislative and management methods the state of Wisconsin uses to put those requirements into practice. The emphasis of the paper, described in the second section, is the institutional difficulty in evaluating the success of a large, integrated water quality program. Measurements which are investigated include (1) watershed water quality before and after implementation of BMPs; (2) program participation as measured by eligible vs. participating landowners, BMPs considered necessary vs. BMPs implemented, or dollars allocated to the NPS program vs. dollars expended; and (3) institutional goal coordination and management effectiveness. It is found that, despite the size and sophistication of Wisconsin's NPS program, there is little if any improvement in ambient water quality in these watersheds, probably because of a general lack of adequate participation in this voluntary program.     

A SPATIAL DECISION SUPPORT SYSTEM FOR ASSESSING AGRICULTURAL NONPOINT SOURCE POLLUTION1

ABSTRACT: A spatial decision support system (SDSS) was developed to assess agricultural nonpoint source (NPS) pollution using an NPS pollution model and geographic information systems (GIS). With minimal user interaction, the SDSS assists with extracting the input parameters for a distributed parameter NPS pollution model from user-supplied GIS base layers. Thus, significant amounts of time, labor, and expertise can be saved. Further, the SDSS assists with visualizing and analyzing the output of the NPS pollution simulations. Capabilities of the visualization component include displays of sediment, nutrient, and runoff movement from a watershed. The input and output interface techniques/algorithms used to develop the SDSS, along with an example application of the SDSS, are described.     

MODELING URBAN NONPOINT SOURCE POLLUTION WITH A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: A geographic information system (GIS) was a useful aid in the assessment of urban nonpoint source pollution and the development of a pollution control strategy. The GIS was used for data integration and display, and to provide data for a nonpoint source model. An empirical nonpoint source loading model driven by land use was used to estimate pollutant loadings of priority pollutants. Pollutant loadings were estimated at fine spatial resolution and aggregated to storm sewer drainage basins (sewersheds). Eleven sewersheds were generated from digital versions of sewer maps. The pollutant loadings of individual land use polygons, derived as the units of analysis from street blocks, were aggregated to get total pollutant loadings within each sewershed. Based on the model output, a critical sewershed was located. Pollutant loadings at major sewer junctions within the critical sewershed were estimated to develop a mitigation strategy. Two approaches based on the installation of wet ponds were investigated - a regional approach using one large wet pond at the major sewer outfall and a multisite approach using a number of smaller sites for each major sewer junction. Cost analyses showed that the regional approach would be more cost effective, though it would provide less pollution control.     

IDENTIFICATION OF CRITICAL NONPOINT POLLUTION SOURCE AREAS USING GEOGRAPHIC INFORMATION SYSTEMS AND WATER QUALITY MODELING1

n integrated approach coupling water quality computer simulation modeling with a geographic information system (GIS) was used to delineate critical areas of nonpoint source (NPS) pollution at the watershed level. Two simplified pollutant export models were integrated with the Virginia Geographic Information System (VirGIS) to estimate soil erosion, sediment yield, and phosphorus (P) loading from the Nomini Creek watershed located in Westmoreland County, Virginia. On the basis of selected criteria for soil erosion rate, sediment yield, and P loading, model outputs were used to identily watershed areas which exhibit three categories (low, medium, high) of non-point source pollution potentials. The percentage of the watershed area in each category, and the land area with critical pollution problems were also identified. For the 1505-ha Nomini Creek watershed, about 15, 16, and 21 percent of the watershed area were delineated as sources of critical soil erosion, sediment, and phosphorus pollution problems, respectively. In general, the study demonstrated the usefulness of integrating GIS with simulation modeling for nonpoint source pollution control and planning. Such techniques can facilitate making priorities and targeting nonpoint source pollution control programs.     

MODELING PREVENTION ALTERNATWES FOR NONPOINT SOURCE POLLUTION AT A WELLFIELD IN FLORIDA1

ABSTRACT: Agricultural and urban activities in the West Wellfield Interim Protection Area (WWIPA), located in West Dade County in South Florida, have the potential to impact both the environmentally sensitive Everglades and the Biscayne Aquifer. The Hydrological Simulation Program-FORTRAN (HSPF) is used to simulate surface runoff, ground water recharge, and transport of sediments, nutrients, and pesticides in the WWIPA, as a basis to quantify impacts and evaluate alternatives. Presented are four model test runs that consider current conditions, the effect of future urbanization of the agricultural land, as well as two preventive actions to minimize pollution levels. Preventive actions include application of minimum required rates of fertilizers and replacement of fertilizers by sewage sludge. Model results show that under current practices, sediments, nutrients, and pesticides are present in surface runoff and nutrients enter the ground water, and that both urbanization and preventive actions result in pollutant reductions.     

REGULATING NONPOINT SOURCE POLLUTION IN SURFACE WATERS: A PROPOSAL1

ABSTRACT: Nonpoint sources (NPS) are an important and continuing source of toxic and conventional pollutants to surface waters. The Clean Water Act amendments of 1987 call for the regulation of these sources through the use of Best Management Practices (BMP). However, BMP implementation has generally occurred on a voluntary basis. This paper proposes a regulatory mechanism to control nonpoint source pollution. The regulatory mechanism involves the development of consortia, made up of all parties potentially responsible for NPS pollution, the development of wasteload allocations that coordinate the pollutant contributions from both point and nonpoint sources in a stream segment, and the issuance of permits to consortia to regulate the impacts of NPS pollution and ensure achievement of state or federal Water Quality Criteria and Standards.     

PRIORITIZING NONPOINT SOURCE PHOSPHORUS LOADING USING A GRASS-MODELING SYSTEM1

ABSTRACT: A UNIX-based windows application was developed to integrate a phosphorus transport model with the Geographic Resources Analysis Support System (GRASS). The system prioritizes potential phosphorus loading from fields or cells in a watershed and can evaluate the effects of alternate management practices on phosphorus yield. The model simulates phosphorus loading by using a daily mass balance on a unit-area basis and incorporates the effects from rainfall, topography, soil properties, fertilizer and animal waste application, and management. Model predictions include dissolved and sediment-bound phosphorus yield, runoff volume, and sediment yield. Within the integrated GRASS-modeling system, the user can obtain model input data, execute the model using various options, rank model input and out. put data, and display them as GRASS-based maps or data tables. All functions are menu driven, developed using C language and X-window tools to run on a SUN workstation platform. The system provides a powerful and efficient tool for prioritizing phosphorus loading from nonpoint sources.     

INCENTIVE-BASED NONPOINT SOURCE POLLUTION ABATEMENT IN A REAUTHORIZED CLEAN WATER ACT1

ABSTRACT: This paper summarizes key provisions of the Clinton Administration's proposals for change in the Clean Water Act. Two of the important themes for change are tougher controls for non-point source pollution and the use of market-based instruments. A detailed analysis of market-based abatement suggests limited potential for reducing costs. The keys to nonpoint source pollution control are clearer definition of property rights combined with changes in government programs that encourage polluting activities.     

ESTIMATING MARYLAND CRITICAL AREA ACVS IMPACT ON FUTURE NONPOINT POLLUTION ALONG THE RHODE RWER ESTUARY1

ABSTRACT: This paper presents the results of an investigation of the effects of the Maryland Critical Area Act on generation of non-point source loads of phosphorus, nitrogen, and sediment to the Rhode River estuary. The Simple Method model, the Marcus and Kearney regression model, and the CREAMS model were used to estimate annual loads under: (1) present conditions, (2) maximum land use development allowable under the Act, and (3) two sets of future land use conditions that might occur if the Act were not in place. Results indicate that the Critical Area Act can reduce the present generation of nonpoint nutrient and sediment loadings 20–30 percent from the regulated area. These reductions can occur while preserving agricultural lands and allowing limited residential and urban development. The decrease in nutrient loadings is primarily dependent upon implementation and enforcement of agricultural best management practices (BMPs). The BMPs could reduce present agricultural nutrient loadings by 90 percent to a level comparable to loadings from residential areas. The estimated effectiveness of the Critical Area Act is even greater when compared to potential future nutrient loadings if development in the area remains unregulated. Unrestricted residential and urban development could increase nutrient loadings by 200 percent to 1000 percent as compared to controlled development under Critical Area Act guidelines. The Critical Area Act primarily prevents these future increases by severely limiting woodland cutting, with lesser results obtained by requiring urban BMPs.     

USING A GIS FOR ESTIMATING INPUT PARAMETERS IN URBAN STORMWATER QUALITY MODELING1

ABSTRACT: Geographic Information Systems (GIS) are being used increasingly as a method of preparing, analyzing, and displaying data for watershed analysis and modeling. Although GIS technology is a powerful tool for integrating and analyzing watershed characteristics, the initial preparation of the necessary database is often a time consuming and costly endeavor. This demonstration project assesses the viability of creating a cost-effective spatial database for urban stormwater modeling from existing digital and hard-copy data sources. The GIS was used to provide input parameters to the Source Loading and Management Model (SLANM), an empirical urban stormwater quality model. Land use characteristics, drainage boundaries, and soils information were geocoded and referenced to a base data layer consisting of transportation features. GIS overlay and data manipulation capabilities were utilized to preprocess the input data for the model. Model output was analyzed through postprocessing by GIS, and results were compared to a similar recent modeling study of the same watershed. The project, undertaken for a small urban watershed located in Plymouth, Minnesota, successfully demonstrates that the use of GIS in stormwater management can allow even small communities to reap the benefits of stormwater quality modeling.     

MODELING OF NONPOINT SOURCE POLLUTION OF NITROGEN AT THE WATERSHED SCALE1

ABSTRACT: The Watershed Nutrient Transport and Transformation (NTT-Watershed) model is a physically based, energy-driven, multiple land use, distributed model that is capable of simulating water and nutrient transport in a watershed. The topographic features and subsurface properties of the watershed are refined into uniform, homogeneous square grids. The vertical discretization includes vegetation, overland flow, soil water redistribution and groundwater zones. The chemical submodel simulates the nitrogen dynamics in terrestrial and aquatic systems. Three chemical state variables are considered (NO₃^-_-, NH₄⁺, and Org-N). The NTT-Watershed model was used to simulate the fate and transport of nitrogen in the Muddy Brook watershed in Connecticut. The model was shown to be capable of capturing the hydrologic and portions of the nitrogen dynamics in the watershed. Watershed planners could use this model in developing strategies of best management practices that could result in maximizing the reductions of nitrogen export from a watershed.     

NUTRIENT CONTRIBUTION OF NONPOINT SOURCE RUNOFF IN THE LAS VEGAS VALLEY1

ABSTRACT: A Geographic Information System (GIS) based non‐point source runoff model is developed for the Las Vegas Valley, Nevada, to estimate the nutrient loads during the years 2000 and 2001. The estimated nonpoint source loads are compared with current wastewater treatment facilities loads to determine the non‐point source contribution of total phosphorus (TP), total nitrogen (TN), and total suspended solids (TSS) on a monthly and annual time scale. An innovative calibration procedure is used to estimate the pollutant concentrations for different land uses based on available water quality data at the outlet. Results indicate that the pollutant concentrations are higher for the Las Vegas Valley than previous published values for semi‐arid and arid regions. The total TP and TN loads from nonpoint sources are approximately 15 percent and 4 percent, respectively, of the total load to the receiving water body, Lake Mead. The TP loads during wet periods approach the permitted loads from the wastewater treatment plants that discharge into Las Vegas Wash. In addition, the GIS model is used to track pollutant loads in the stream channels for one of the subwatersheds. This is useful for planning the location of Best Management Practices to control nonpoint pollutant loads.     

MODELING DEVELOPED COASTAL WATERSHEDS WITH THE AGRICULTURAL NON-POINT SOURCE MODEL1

ABSTRACT: Many coastal states are facing increasing urban growth along their coast lines. The growth has caused urban non-point source nitrogen runoff to be a major contributor to coastal and estuarine enrichment. Water resource managers are responsible for evaluating the impacts from point and non-point sources in developed watersheds and developing strategies to manage future growth. Non-point source models provide an effective approach to these management challenges. The Agricultural Non-Point Source Model (AGNPS) permits the incorporation of important spatial information (soils, landuse, topography, hydrology) in simulating surface hydrology and nitrogen non-point source runoff. The AGNPS model was adapted for developed coastal watersheds by deriving urban coefficients that reflect urban landuse classes and the amount of impervious surface area. Popperdam Creek watershed was used for model parameter development and model calibration. Four additional watersheds were simulated to validate the model. The model predictions of the peak flow and total nitrogen concentrations were close to the field measurements for the five sub-basins simulated. Measured peak flow varied by 30 fold among the sub-basins. The average simulated peak flow was within 14 percent of the average measured peak flow. Measured total nitrogen loads varied over an order of magnitude among the sub-basins yet error between the measured and simulated loads for a given sub-basin averaged 5 percent. The AGNPS model provided better estimates of nitrogen loads than widely used regression methods. The spatial distribution of important watershed characteristics influenced the impacts of urban landuse and projecting future residential expansion on runoff, sediment and nitrogen yields. The AGNPS model provides a useful tool to incorporate these characteristics, evaluate their importance, and evaluate fieldscale to watershed-scale urban impacts.     

AN INTERACTWE MODELING ENVIRONMENT FOR NON-POINT SOURCE POLLUTION CONTROL1

ABSTRACT: Non-point source pollution cuntinues to be an important environmental and water quality management problem. For the moat part, analysis of non-point source pollution in watersheds has depended on the use of distributed models to identify potential problem areas and to assess the effectiveness of alternative management practices. To effectively use these models for watershed water quality management, users depend on integrated geographic information systems (GIS)-based interfaces for input/output data management. However, existing interfaces are ad-hoc and the utility of GIS is limited to organization of input data and display of output data. A highly interactive water quality modeling interface that utilizes the functional components and analytical capability of GIS is highly desirable. This paper describes the tight coupling of the Agricultural Non-point Source (AGNPS) water quality model and ARC/INFO GIS software to provide an interactive hybrid modeling environment for evaluation of non-point source pollution in a watershed. The modeling environment is designed to generate AGNPS input parameters from user-specified GIS coverages, create AGNPS input data files, control AGNPS model simulations, and extract and organize AGNPS model output data for display. An example application involving the estimation of pesticide loading in a southern Iowa agricultural watershed demonstrates the capability of the modeling environment. Compared with traditional methods of watershed water quality modeling using the AGNPS model or other ad-hoc interfaces between a distributed model and GIS, the interactive modeling environment system is efficient and significantly reduces the task of watershed analysis using tightly coupled GIS databases and distributed models.     

LARGE AREA HYDROLOGIC MODELING AND ASSESSMENT PART II: MODEL APPLICATION1

ABSTRACT: This paper describes the application of a river basin scale hydrologic model (described in Part I) to Richland and Chambers Creeks watershed (RC watershed) in upper Trinity River basin in Texas. The inputs to the model were accumulated from hydro-graphic and geographic databases and maps using a raster-based GIS. Available weather data from 12 weather stations in and around the watershed and stream flow data from two USGS stream gauge station for the period 1965 to 1984 were used in the flow calibration and validation. Sediment calibration was carried out for the period 1988 through 1994 using the 1994 sediment survey data from the Richland-Chambers lake. Sediment validation was conducted on a subwatershed (Mill Creek watershed) situated on Chambers Creek of the RC watershed. The model was evaluated by well established statistical and visual methods and was found to explain at least 84 percent and 65 percent of the variability in the observed stream flow data for the calibration and validation periods, respectively. In addition, the model predicted the accumulated sediment load within 2 percent and 9 percent from the observed data for the RC watershed and Mill Creek watershed, respectively.     

FECAL COLIFORM SOURCE ASSESSMENT IN A SMALL,MIXED LAND USE WATERSHED1

ABSTRACT: This study presents the results of fecal coliform (FC) sampling in the Rawls Creek, South Carolina, watershed during 1999 and 2000. The work was undertaken because the watershed is listed on the 303(d) list for South Carolina due to FC excursions. The watershed is 43.8 percent residential, 35 percent forest, 5.7 percent mixed urban, 4.9 percent commercial, and 4.8 percent agriculture. Samples were taken at 15 stations during eight field trips divided into two phases to characterize FC inputs from subbasins and to integrate results from upstream sampling. FC concentrations ranged from 135 to 730 colonies/100 ml. Results suggest that retention ponds in the area are a significant factor in attenuation of FC concentrations. Catchments with the largest contiguous impervious areas are the greatest source of FC. The highest concentrations of FC were observed at stations just downstream from a large detention basin that intercepts storm runoff from a large commercial area. Further analysis of the design and performance of that structure is suggested. The Koon Branch tributary is less than 20 percent of the land area in the watershed but may contribute 40 percent of the fecal loading. The results of this study confirm the importance of site assessments to aid understanding of nonpoint source pollution in complex watersheds.     

A CRITIQUE OF WATERSHED MANAGEMENT EFFORTS IN THE LOWER MISSISSIPPI ALLUVIAL PLAIN1

ABSTRACT: Integrated watershed management in the Lower Mississippi Alluvial Plain (Delta) requires blending federal, state, and local authority. The federal government has preeminent authority over interstate navigable waters. Conversely, state and local governments have authority vital for comprehensive watershed management. In the Delta, integrating three broad legal and administrative regimes: (1) flood control, (2) agricultural watershed management, and (3) natural resources and environmental management, is vital for comprehensive intrastate watershed, and interstate river basin management. Federal Mississippi River flood control projects incorporated previous state and local efforts. Similarly, federal agricultural programs in the River's tributary headwaters adopted watershed management and were integrated into flood control efforts. These legal and administrative regimes implement national policy largely in cooperation with and through technical and financial assistance to local agencies such as levee commissions and soil and water conservation districts. This administrative infrastructure could address new national concerns such as nonpoint source pollution which require a watershed scale management approach. However, the natural resources and environmental management regime lacks a local administrative infrastructure. Many governmental and non governmental coordinating organizations have recently formed to address this shortcoming in the Delta. With federal and state leadership and support, these organizations could provide mechanisms to better integrate natural resources and environmental issues into the Delta's existing local administrative infrastructure.     

DRY AND WET WEATHER FLOW NUTRIENT LOADS FROM A LOS ANGELES WATERSHED1

Effective watershed management requires an accurate assessment of the pollutant loads from the associated point and nonpoint sources. The importance of wet weather flow (WWF) pollutant loads is well known, but in semi‐arid regions where urbanization is significant the pollutant load in dry weather flow (DWF) may also be important. This research compares the relative contributions of potential contaminants discharged in DWF and WWF from the Ballona Creek Watershed in Los Angeles, California. Models to predict DWF and WWF loads of total suspended solids, biochemical oxygen demand, nitrate‐nitrogen, nitrite‐nitrogen, ammonia‐nitrogen, total Kjeldahl nitrogen, and total phosphorus from the Ballona Creek Watershed for six water years dating from 1991 to 1996 were developed. The contaminants studied were selected based on data availability and their potential importance in the degradation of Ballona Creek and Santa Monica Bay beneficial uses. Wet weather flow was found to contribute approximately 75 percent to 90 percent of the total annual flow volume discharged by the Ballona Creek Watershed. Pollutant loads are also predominantly due to WWF, but during the dry season, DWF is a more significant contributor. Wet weather flow accounts for 67 to 98 percent of the annual load of the constituents studied. During the dry season, however, the portion attributable to DWF increases to greater than 40 percent for all constituents except biochemical oxygen demand and total suspended solids. When individual catchments within the watershed are considered, the DWF pollutant load from the largest catchment is similar to the WWF pollutant load in two other major catchments. This research indicates WWF is the most significant source of nonpoint source pollution load on an annual basis, but management of the effects of the nonpoint source pollutant load should consider the seasonal importance of DWF.