Potential of surplus biomass gasifier based power generation: A case study of an Indian state Rajasthan

Facing the finiteness of fossil fuels and its associated environmental problems, new prospects to cover energy demand are urgently required. Energy from surplus biomass can support an essential contribution to a sustainable energy generation. This paper deals with a case study of surplus biomass available in the Indian state Rajasthan. About 1275 MW electrical power is possible to generate through biomass gasifier based power generation plant through surplus biomass available in Rajasthan. About 1656 tonnes of CO₂ can be saved annually by installation of 1 MW biomass gasifier based power plant. The techno economic parameter like net present worth, cost benefit ratio and pay back period are also carried out for this route of power generation and these are about 1.18 million US$, 1.42 and 8 years and 2 months respectively.     

A process integration approach to industrial water conservation: a case study for an Indian starch industry

A case study for water using network of a Starch industry in the state of Gujarat, India, is undertaken with an aim to reduce demineralised water and freshwater flow rates and consequently the wastewater flow rate. The problem was identified as a multi contaminant, reuse and recycle problem. The freshwater consumption and demineralised water consumption were 100 t/h and 51 t/h respectively before modification and the network was dealing with three major contaminants such as total organic content, total dissolved solids and total suspended solids. A program was developed in MATLAB for analysis using Water Pinch. The improved water using network designed for the present work consumed less demineralised and freshwater. The reductions are of the tune of 28% and 64.38% for demineralised and fresh water respectively. Due to alteration in piping, there will be a saving of 406 026 INR per year, which will be utilized for development of efficient environment policy for the company. The entire concept had been implemented on plant level on 1st February-2009 and the reductions are of the tune of 25% and 60% for demineralised and fresh water respectively.     

A methodology for the life cycle and sustainability analysis of manufacturing processes

Life cycle assessment is emerging as a powerful tool in the evaluation of the environmental impact of manufacturing processes. This paper describes a general methodology for the life cycle analysis of manufacturing processes taking into account the flexibility and decision-making potential of knowledge base systems. Emphasis is placed on on-site waste minimisation and associated sustainability characteristics in relation to environmental impact assessment and process improvement. The ensuing software model is applied with some success to an initial study of pulp and paper manufacture.     

Cluster analysis for studying industrial sustainability: an empirical study in Shanghai

Compared with the extensive research on industrial sustainability in cities of the developed world, similar empirical work in developing countries is rare. This article examines industrial sustainability of the manufacturing sector in one of the central districts in Shanghai, PR China, using hierarchy cluster analysis, based on selected variables that reflect the industrial advantages, social contributions, environmental management and economic performance of the manufacturing sector. The variables represent the competition capability, proportion of employees in the relevant sector to the total number of employees in the manufacturing industry, the coefficient of environmental protection and market shares. Twenty-five manufacturing sectors are grouped into four clusters in the district. According to the characteristics of the various clusters, suggestions are proposed for improving their industrial sustainability.     

Challenges and opportunities for sustainability in regional universities: a case study in Mytilene,Greece

Regional Higher Education Institutions (HEIs) may contribute significantly to the promotion of sustainability through several means connected with their functioning. Nevertheless, several challenges can present themselves during the planning and implementation of such initiatives. The aim of this paper is to underline these limitations through the relevant literature and highlight their main consequences on the achievement of sustainability. An empirical study, investigating the perception of students regarding the constraints to achieving sustainability in a regional university of Greece, was conducted and is discussed in relation to the university's specific characteristics – its fragmented nature with campuses situated on five Aegean islands, its public status as well as its role in creating and dispersing knowledge in less developed areas of the country.     

Quantifying potential profit from material recycling: a case study in brick manufacturing

Efforts to increase the use of waste materials as substitutes for virgin primary materials in industry are considered an important step toward sustainable industrial development. Some industries, however, have struggled to increase the recycling of materials for a variety of reasons. This study proposes a new approach to searching for recycling across industry boundaries. By focusing on an entire industry, the locations where economic and environmental benefit exists can be identified. This research identifies brick manufacturing facilities in the United States that are most likely to gain substantial economic benefit from the recycling of waste products. The results of this case study indicate that an industry-based approach can provide economically feasible pathways towards sustainable industrial development, especially for data rich manufacturing nations like the United States.     

Improving agricultural sustainability: the case of Swedish greenhouse tomatoes

Of major concern to agriculturists and society are issues of sustainability and land and resource requirements for food and fiber. Sustainability of Swedish domestic agriculture is explored using the production of tomatoes in greenhouses as a case study. Issues of sustainability are related to net yields, environmental loading, greenhouse gases, employment and land use. A model for evaluation of sustainability is developed and illustrated using the concepts and theories of analysis. The intensive tomato production system investigated was shown to be highly dependent on non-renewable resources and human service fed back from society. Substituting wood powder from logging residues for the oil used for heating reduced the environmental load and improved the sustainability of the system significantly.     

Design and manufacturing of femoral stems for the Indian population

Several researchers have stressed the need for a proper implant-patient match in hip joint replacements, in particular, for cementless femoral stems. Some of the complications of mismatch are aseptic loosening, improper load distribution, and discomfort. In this study, the differences in dimensions between femurs of elderly Indians and those of populations from other regions are compared in order to solve the problem of a possible geometric mismatch between a selected implant and the femurs of an Indian patients are concerned. This paper also describes a methodology for implant designing from measured anthropometric data, fit evaluation, finite element (FE) stress analysis and subsequently implant manufacturing using the CAM (Computer Aided Manufacturing) technique. The machining of the Titanium alloy femoral stem is usually performed on a 5 Axis CNC (Computer Numerical Control) machining center. However, in this study the machining of the femoral stem was effectively performed on a 3 Axis CNC machining center to emphasize on economical benefits for low cost manufacturing strategy.     

Leveraging assets: a case study of the sustainability initiative at the University of Minnesota,Morris

This article presents an overview of the sustainability initiative at the University of Minnesota, Morris, key components of which include a realistic goal of energy self-sufficiency by 2010, a new environmental studies curriculum, and various research and outreach projects. Many non-obvious institutional assets – such as lobbying networks in the state legislature, and geographic/demographic features that are more commonly thought of as liabilities – turned out to play critical roles in setting the initiative in motion. The initial physical assets have been leveraged into complementary opportunities for research, teaching, and institutional development in this direction.     

Institutionalizing sustainability: an empirical study of corporate registration and commitment to the United Nations global compact guidelines

Drawing upon institutional and stakeholder theories, we explore the ‘causal’ mechanisms of institutionalization and their influence on Sustainable Development initiatives. To test our arguments, we study the registration patterns of 394 large corporations from 12 Western European and Latin American countries into the United Nations Global Compact. Results indicate that the normative and mimetic mechanisms of institutionalization (i.e., academe and peer influence) are better indicators of Sustainable Development initiatives than the coercive one (i.e., government regulation). The implications of these findings are consequential if SD practices continue as an ethical choice, and not a mandated obligation, for corporate decision makers.     

Evaluation of the sustainability of swine manure fertilization in orchard through Ecological Footprint Analysis: results from a case study in Italy

Ecological Footprint Analysis (EFA) is an environmental accounting system, in physical unit, able to quantify the total amount of ecosystem resources required by a region or by a production process. This methodology is both scientifically robust and widely diffused for territorial and productive analysis. The application of EFA to agricultural systems are still uncommon and examples in the fruit sector rare.In this work a detailed application of EFA to an experimental trial in a commercial nectarine orchard in Piedmont (Italy) is presented. The field trial is focused on the evaluation of agronomical benefit of various kinds of swine manure for fertilizing orchards. Four productive systems were established from 2008: liquid slurry (LS), covered slurry (CS), solid fraction (SF), mineral nutrition (MN). All the environmental impacts of the four systems were quantified both directly on field and with extrapolations from farmer knowledge. As previous studies suggested, we considered not only the one-year field operations, but also the whole lifetime of the orchard. The environmental costs of each system are presented and related to each other on the basis of their relative footprint value.Results highlight almost the same ecological footprint for the three manure fertilized systems (LS, CS and SF) with average of 0.96 gha t⁻¹) and the highest ecological footprint can be found in the MN system (1.14 gha t⁻¹). Interesting remarks can be done comparing the contributions to the ecological footprint of the field operations related to fertilization in the four systems. In the manure fertilized systems the fertilizer contribution goes from 0.9% to 1.2% of the total ecological footprint; but in the MN system the fertilizer contribution is 6.6% of the total ecological footprint. Results support the hypothesis that internal recycle and connections among different systems increasingly resulted in high system benefit and sustainability.     

Wood waste management practices and strategies to increase sustainability standards in the Australian wooden furniture manufacturing sector

This study assesses the wood waste generation and its associated true cost which Australian wooden furniture manufacturing companies encounter and are exposed to. The assessment aims to create awareness and facilitate understanding within the wooden furniture manufacturing industry about how much wood is wasted into the production process and how this is translated in financial terms, how wood waste can be reduced, what can and can't be recycled and what services are available to assist businesses with recycling. The results indicate that during processing, 7% up to 40–50% of the annual supply of wooden raw material become residues. The costs connected directly to these wastes represent 2–8% of the turnover.     

Assessing the quality of sustainability reporting: an alternative methodological approach

Against the background of the growing importance in corporate sustainability reporting, the Institute for Sustainable Management at the University of OAS in Aargau, North-Western Switzerland, instigated a research project in 2003. This represents one of the first attempts to perform a quantitative and qualitative analysis of corporate sustainability reporting in one country (Switzerland) and is the second and, at the time, most comprehensive national study worldwide on reporting practices. The object of this paper is to reflect the methodology of the Swiss study independent of other procedures used to-date. The extent to which the new methodological approach overcomes the weaknesses of other approaches will primarily be demonstrated. Secondly, the research team's findings from the results of the study and interviews with managers from 25 Swiss companies in connection with the study will be presented.     

Selection of product categories for a national eco-labelling scheme in developing countries: a case study of Vietnamese manufacturing sub-sectors

Although the selection of product categories is a deciding factor for the success of eco-labelling schemes, there are no consistent methods for determining selection factors and how to prioritise product categories for developing countries (DgCs). This paper attempts to identify appropriate factors for product category selection and formulate a prioritisation method applicable to DgCs. We first examined the selection factors currently utilised in schemes worldwide by conducting a questionnaire survey of representatives of foreign schemes. Selection factors were illustrated on a plot graph, which indicated the percentage of factors implemented in the schemes of DgCs and developed countries (DGs), and their plausibility assessed when utilised in the schemes of DgCs. In this way, we proposed three groups of factors: an exclusion factor, five core factors and seven operational factors. Then, under the conditions of DgCs, such as socioeconomic issues and availability of data, we used and modified some judging guidelines of the European Ecolabel (the EU Flower), e.g. determining the environmental impacts and potential of environmental improvements, in the scoring method to prioritise product categories by weighting factors. In light of our findings, we utilised the proposed factors and modified the scoring method to prioritise the screened primary list of product categories of Vietnamese manufacturing sub-sectors. By scoring factor-based questions and prioritising in three ways, i.e. following the scoring method of the EU Flower programme, totalling all values with equal weighting, and totalling all values but by doubling the weighting of core factors compared with operational factors, we observed that the weighted prioritisation differentiates priority product categories more clearly than the other methods. We propose the two highest potential candidates for eco-labelling in Vietnam, namely textile/garment and fishery products.     

An abbreviated alternatives assessment process for product designers: a children’s furniture manufacturing case study

Alternatives assessment is becoming increasingly popular to evaluate the potential environmental and human health hazards of materials. A three step process was used to identify and evaluate alternative products for a children's furniture manufacturer. An alternatives assessment framework was developed to analyze alternative mattresses. The framework specifically addresses those environmental and safety attributes applicable to the product and the product components in accordance with the product’s intended use. The result of the assessment allowed the manufacturer to select the most environmentally friendly alternative and eliminate polyvinyl chloride from their product.     

Implementing stricter environmental regulation to enhance eco-efficiency and sustainability: a case study of Shandong Province’s pulp and paper industry, China

There has been much debate on the topic of whether stricter environmental regulations can promote environmental performance and economic performance at the same time. Different researchers have used different indicators to measure environmental performance and economic performance in their empirical studies. However, it is a surprise that few studies have checked the relationship between environmental regulation and eco-efficiency, as the latter is widely regarded as a quite powerful tool of considering ecology and economy together.In this study the background is the implementation in 2003 of the Stricter Discharge Standard (SDS) in Shandong Province’s Pulp and Paper Industry (SPPI), compared to the national standards of China. The stricter regulations were intended to promote corporate change from passive management to active control and from end-of-pipe treatment to cleaner production. This study investigated the eco-efficiency trends of SPPI from 2001 to 2008 in three fields: water efficiency, energy efficiency and environment efficiency. A “de-linking” and “re-linking” tool was used to attain a further evaluation. The study showed that with the implementation of stricter regulation most of the efficiency indicators (except CO₂ emission and energy consumption) had achieved significant improvements, and the overall environmental performance trends of SPPI showed it to be more sustainable. However, the study also found that it was not enough to address a single indicator in the environmental regulation of the pulp and paper industry. More holistic eco-efficiency indicators need to be further considered and introduced to the industry as the next step to create true sustainable development.     

Agriculture sustainability in a sensitive environment--a case analysis of Loess Plateau in China

Loess Plateau, an arid and semi-arid region in Northwest China, is well-known for its most serious soil erosion in terms of sediment yield each year. Soil erosion, which is intensified by agricultural activities, is the major factor influencing sustainable agriculture development in this region. It reduces productivity by removing nutrients and especially reducing water availability that is essential for crop production in the area. It also brings about off-site costs by demanding more efforts for maintenance of banks and dams along Yellow River through raising the riverbed with sediment. Climate is capricious and extreme weather conditions occur frequently, which impairs normal agricultural production with erosion and also decrease of water availability. Extensive way of farming still dominates on the Loess Plateau, which cannot produce satisfying economic results and needs to be improved or altered. Conventional agricultural production pattern needs to be reconsidered for husbandry has not been granted its due position. Agriculture is the backbone of economy. Poor agricultural production impedes economic development and vice versa, backward economy also influences the advancement of agriculture. Besides a large population, education status of farmers is another threshold that requires being resolved for a sustainable agriculture.Although conventional agriculture has been practiced there for more than 5000 years, now it cannot meet the demand for food and fiber by the increasing population and some of its farming practices are contributing to environmental degradation directly or indirectly and can sustain no longer. Agriculture on Loess Plateau needs to find its own way of sustainability. To work toward a sustainable agriculture, chances and challenges both indwell on Loess Plateau.     

Simplified life cycle sustainability assessment of mangrove management: a case of plantation on wastelands in Thailand

Sustainable mangrove management needs to consider trade-offs between multiple benefits provided by mangrove ecosystems and to balance the conflicting objectives of various stakeholders. The aim of the present study is to assess the sustainability of mangrove management based on the life cycle approach. We examine two mangrove management systems in Thailand, namely, the strict preservation and charcoal production systems. The results show that the strict preservation system has an advantage over the charcoal production system from the environmental perspective (the net amount of CO₂ absorbed by mangroves) while the charcoal production is a more favorable system than strict preservation from the social perspective (the amount of employment created in local communities). On the other hand, it is difficult to say that both systems are sustainable from an economic aspect. The charcoal production system needs to develop improved management regimes for commercial charcoal production and requires financial assistance in the period when its net cash flows are negative. As solutions for these problems, the introduction of community forest management and the utilization of a fund for REDD (Reducing Emissions from Deforestation and Degradation in Developing Countries) can be proposed.     

A conceptual framework for analyzing sustainability strategies in industrial supply networks from an innovation perspective

This article proposes a new conceptual framework concerning the implementation of sustainability in supply networks from an innovation perspective. Based upon a recent qualitative literature review in environmental, social/ethical and logistics/operations management journals, this article summarizes and analyses the approaches found. Concluded is that even though innovation, socialization, experimental learning and cultural perspectives have been acknowledged as being relevant to explaining supply network dynamics in general, they are rarely included in the current frameworks concerning sustainability. The question still remains why companies influenced by the same external factors and similar in size and power develop a different strategy towards sustainability aspects in their supply network. The article demonstrates with the first results of a survey held in the fashion/clothing sector the relevance of this question.The proposed conceptual framework states that the capability to develop a strategy is influenced by the innovation power of the “focal” company and its supply network. The three implementation strategies presented in the framework are: resign, offensive and defensive. Two propositions are defined to be tested. These propositions focus on the relation between the level of innovation power and the implementation strategy concerning sustainability. Factors used to characterize the innovation power of the “focal” company are: external orientation and transparency, cooperation between departments, learning and adapting, leadership, autonomy and possibility for experimenting, and result driven. Cooperation in the supply networks is characterized by factors like trust, reputation, joint programmes, and cooperative information systems throughout the supply network.In empirical research, strategies found will be related with the level of innovation power. This level will be measured using the factors mentioned. The results might add a new innovation dimension to an improved conceptual framework within the interdisciplinary field of sustainability and supply network research.     

Bioenergy recovery from landfill gas: A case study in China

Landfill gas (LFG) utilization which means a synergy between environmental protection and bioenergy recovery was investigated in this study. Pressure swing adsorption technology was used in LFG purification, and laboratory experiment, pilot-scale test, and on-site demonstration were carried out in Shenzhen, China. In the laboratory experiment, A-type carbon molecular sieve was selected as the adsorbent by comparison of several other adsorbents. The optimal adsorption pressure and adsorption time were 0.25 MPa and 2 min, respectively, under which the product generation rate was 4.5 m³/h and the methane concentration was above 90%. The process and optimization of the pilot-scale test were also reported in the paper. The product gas was of high quality compared with the National Standard of Compressed Natural Gas as Vehicle Fuel (GB18047-2000), when the air concentration in feed gas was under 10.96%. The demonstration project was composed of a collection system, production system, and utilization system. The drive performance, environmental protection performance, and economic feasibility of the product gas — as alternative fuel in passenger car, truck, and bulldozer—were tested, showing the feasibility technology for LFG utilization.