Feasibility of husk-fuelled steam engines as prime mover of grid-connected generators under the Thai very small renewable energy power producer (VSPP) program

Rice husk generated as a by-product of rice mill processes can be utilized as an energy source for husk-fuelled rice mills. The economic evaluation of the investment of husk-fuelled steam engine rice mills, which generate mechanical energy for the direct driving of milling equipments, has previously been presented in literature. It was reported that for some particular conditions of rice mill, the investment of husk-fuelled steam engine as energy-saving technology is financially feasible. Since May 2002, electricity distributors in Thailand have allowed renewable energy producers up to 1 MW to connect their generators to the grid in order to sell surplus electricity to the grid. This arrangement creates more income opportunities for husk-fuelled steam engine owners to generate not only mechanical power for rice milling processes, but also surplus electricity for feeding onto the grid. The objective of this study is to investigate the financial feasibility of the investment in a husk-fuelled steam engine system which drives grid-connected electrical generators, reduces rice mill demand and electricity and sells surplus electricity to the grid. The technical and economic data for rice mill sizes 35, 45, 60, 95 and 120 t/d presented in this study show that the husk-fuelled steam engine system with grid-connected generators improves the economic performance of applying the system solely for the largest 120 t/d rice mills. However, the conventional husk-fuelled steam engine without electric generator gives a better economic performance of the rice mills sizes from 45 to 95 t/d.     

Minimizing greenhouse gas emissions through the application of solar thermal energy in industrial processes

The analysis of industrial energy usage indicates that low temperature processes (20 ≈ 200 °C) are used in nearly all industrial sectors. In principle there is the potential to use solar thermal energy in these lower temperature processes thus, reducing the environmental impact of burning fossil fuels. Using the model of an Austrian dairy plant, this research investigated the potential for, and the economic viability of, using solar energy heat processes in industry.Some industrial sectors such as food, chemistry, plastic processing, textile industry, building materials industry and business establishments can be identified as potential sectors for the application of solar energy heat processes. When assessing the (economic) feasibility of solar thermal energy, the investigation of these industries’ energy systems has to focus on an integrated analysis of cooling and heating demands and to take into account competing technologies. Amongst these are heat integration, cogeneration, new technologies and heat pumps. Pinch analysis was used to investigate industrial energy systems and heat integration possibilities and proved to be a viable tool. Working from the basis of energy balances, Sankey diagrams, pinch analysis and environmental cost accounting, a newly developed investigation tool was applied in the case study of an Austrian dairy plant. This enabled a fast optimization of the system. Two different options for the integration of solar thermal energy into the production line were calculated, option 1 with a solar field of 1000 m² and option 2 with a solar field of 1500 m². Natural gas savings of 85,000 for option 1 and 109,000 m³/a for option 2 can be achieved, resulting in a reduction of 170 tons of CO₂ per year, or 218 tons for options 1 and 2 respectively. Based upon option 1, return on investment is realised after less than three years of implementation. This research thus, indicates promising technical and economical feasibility of using solar thermal energy for industrial processes and provides an important step towards sustainable zero emission production in industry.     

Carbon footprint of sugar produced from sugarcane in eastern Thailand

Carbon footprint (CFP) of sugar produced from sugarcane in eastern Thailand was estimated from greenhouse gas emissions (CO₂, CH₄, and N₂O) during the sugarcane cultivation and milling process. The use of fossil fuels, chemical and organic fertilizer and sugarcane biomass data during cultivation were collected from field surveys, questionnaires and interviews. Sugar mill emissions, fossil fuel utilization and greenhouse gas emission from wastewater treatments were included. The results show that sugar production has a carbon footprint of 0.55 kg CO₂e kg^?1 sugar. This carbon footprint was a sum of 0.49 kg CO₂e kg^?1 sugar from sugarcane cultivation and 0.06 kg CO₂e kg^?1 sugar from the milling process. For the cultivation part, most of the GHGs emissions were from fertilizer, fossil fuel use and biomass burning. The CFP in eastern Thailand is sensitive to the type of data selected for calculation and of variations of farm inputs during sugarcane cultivation. There was no significant difference of CFP among farm sizes, although small farms tended to give a relatively higher CFP than that of medium and large farms.     

Assessing the likelihood of catchments across England and Wales meeting ‘good ecological status’ due to sediment contributions from agricultural sources

This paper is concerned with estimating the gap between current and compliant losses of suspended sediment from the agricultural sector in England and Wales in relation to achieving ‘good ecological status’ (GES) in freshwaters by 2015. Given the emphasis on strategic information for policy support, the assessment necessitated a novel modelling methodology for predicting mean annual total suspended sediment loads (SSL) and time-weighted suspended sediment concentrations (SSC). GES was defined as the guideline annual average SSC of 25 mg l⁻¹ cited by the EC Freshwater Fish Directive. Total suspended sediment inputs to all rivers across England and Wales were estimated using a national sediment source apportionment exercise detailing the contributions from diffuse agricultural and urban sources, eroding channel banks and point sources. The total SSL estimated for each Water Framework Directive (WFD) sub-catchment (n = 7816) across England and Wales was used in conjunction with predicted flow exceedance to derive corresponding SSC time-exceedance plots. Spatial variations in modelled time-averaged SSC compared well with available monitoring data. Given the focus upon national scale, the predictive power of the SSC model (r² = 33%) was considered realistic. The modelling approach provided a means of mapping the probability of annual average SSC being less than the 25 mg l⁻¹ standard for GES due to sediment losses from all potential, as well as from agricultural sources only. In order to meet GES in non-compliant catchments, suspended sediment losses from diffuse agricultural sources will typically need to be reduced by up to 20%, but by as much as 80% in isolated cases.     

Metal-cored arc welding process for joining of modified 9Cr-1Mo (P91) steel

In the present work, metal-cored arc welding process was used for joining of modified 9Cr-1Mo (P91) steel. Metal-cored arc welding process is characterized by high productivity, slag-free process, defect-free weldments that can be produced with ease, and good weldability. Toughness is essential in welds of P91 steel during hydro-testing of vessels. There is a minimum required toughness of 47 J for welds that has to be met as per the EN1557:1997 specification. In the present study, welds were completed using two kinds of shielding gases, each composition being 80% Argon + 20% CO₂, and pure argon respectively. Microstructural characterization and toughness evaluation of welds were done in the as – weld, PWHT at 760 °C – 2 h and PWHT at 760 °C – 5 h conditions. The pure argon shielded welds (‘A2’ and ‘B2’) have higher toughness than 80% argon + 20% CO₂ shielded welds (‘A1’ and ‘B1’). Pure argon shielded welds show less microinclusion content with low volume fraction of δ-ferrite (<2%) phase. Themo-calc windows (TCW) was used for the prediction of equilibrium critical transformation points for the composition of the welds studied. With increase in post-weld heat treatment (PWHT) duration from 2 h to 5 h, there was increase in toughness of welds above 47 J. Using metal-cored arc welding process, it was possible to achieve the required toughness of more than 47 J after PWHT at 760 °C – 2 h in P91 steel welds.     

Life-cycle environmental and economic impacts of energy-crop fuel-chains: an integrated assessment of potential GHG avoidance in Ireland

This paper combines life-cycle analyses and economic analyses for Miscanthus and willow heat and electricity fuel-chains in Ireland. Displaced agricultural land-uses and conventional fuels were considered in fuel-chain permutations. Avoided greenhouse gas (GHG) emissions ranged from 7.7 to 35.2 t CO₂ eq. ha⁻¹ a⁻¹. Most fuel-chain permutations exhibited positive discounted financial returns, despite losses for particular entities at a farm-gate processed-biomass price of €100 t⁻¹ dry-matter. Attributing a value of €10 t⁻¹ CO₂ eq. to avoided GHG emissions, but subtracting financial returns associated with displaced fuel supplies, resulted in discounted annual national economic benefits (DANEBs) ranging from −457 to 1887€ ha⁻¹ a⁻¹. Extrapolating a plausible combination of fuel-chains up to a national indicative scenario resulted in GHG emission avoidance of 3.56 Mt CO₂ eq. a⁻¹ (5.2% of national emissions), a DANEB of 167 M€, and required 4.6% of national agricultural land area. As cost-effective national GHG avoidance options, Miscanthus and willow fuel-chains are robust to variation in yields and CO₂ price, and appear to represent an efficient land-use option (e.g. compared with liquid biofuel production). Policies promoting utilisation of these energy-crops could avoid unnecessary, and environmentally questionable, future purchase of carbon credits, as currently required for national Kyoto compliance.     

Integrated environmental assessment of biodiesel production from soybean in Brazil

This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8 kg of topsoil are lost in erosion, besides the cost of 0.2 kg of fertilizers, about 5.2 m² of crop area, 7.33 kg of abiotic materials, 9.0 tons of water and 0.66 kg of air and about 0.86 kg of CO₂ were released. About 0.27 kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48 J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E + 05 seJ J^?1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%).     

Bioconversion of industrial wastewater from palm oil processing to butanol by Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564)

The feasibility of utilizing enzymatic hydrolysates of separator sludge, a palm oil mill effluent, and sago starch in the acetone–butanol–ethanol fermentation by Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564) was investigated. The sludge hydrolysate was used as a growth medium substitute, a fermentation substrate, and as a source of nitrogen and micronutrients. Butanol produced, 3.50 g l⁻¹, was the same when the sludge hydrolysate was used as a second (refreshing) growth medium. As a substrate, initial nitrogen gas sparging shortened the lag phase which then enhanced butanol production. Fermentation without pH control enhanced butanol productivity whereas controlled fermentation at pH 5.5 and 5.8 progressively favored acid production while redox dyes, methyl and benzyl viologen, neutral red and methylene blue, had no effect on solvent production. As a source of nitrogen and micronutrients in sago starch hydrolysate, the final butanol concentration, 10.4 g l⁻¹, was comparable to that in glucose and sago starch hydrolysate media supplemented with tryptone–yeast–acetate (TYA) medium components medium, although productivity was low. Cell growth, butanol and total solvent productivity in TYA-supplemented sago starch hydrolysate and glucose media were the same.     

A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints

Modified 9Cr-1Mo (P91) steel is widely used in the construction of power plant components. In the present study, a comparative study on influence of activated flux tungsten inert gas (A-TIG), and gas tungsten arc (GTA) welding processes on the microstructure and the impact toughness of P91 steel welds was carried out. P91 steel welds require a minimum of 47 J during the hydrotesting of vessels as per the EN1557: 1997 specification. Toughness of P91 steel welds was found to be low in the as-weld condition. Hence post-weld heat treatment (PWHT) was carried out on weld with the objective of improving the toughness of weldments. Initially as per industrial practice, PWHT at 760 °C – 2 h was carried out in order to improve the toughness of welds. It has been found that after PWHT at 760 °C – 2 h, GTA weld (132 J) has higher toughness than the required toughness (47 J) as compared with A-TIG weld (20 J). The GTA weld has higher toughness due to enhanced tempering effects due to multipass welding, few microinclusion content and absence of δ-ferrite. The A-TIG weld requires prolonged PWHT (i.e. more than 2 h at 760 °C) than GTA weld to meet the required toughness of 47 J. This is due to harder martensite, few welding passes that introduces less tempering effects, presence of δ-ferrite (0.5%), and more alloy content. After PWHT at 760 °C – 3 h, the toughness of A-TIG weld was improved and higher than the required toughness of 47 J.     

Comparison of absorption rates and absorption capacity of ammonia solvents with MEA and MDEA aqueous blends for CO2 capture

In this work we present the experimental results of absorption rates and absorption capacity for the CO₂ absorption by ammonia (NH₃) aqueous solutions. Experiments are carried out in a thermoregulated Lewis-type cell reactor and are achieved in temperature and concentration ranges of 278–303 K and 2–5wt.% NH₃ respectively. The obtained values for absorption kinetic rates and absorption capacity are compared with those available for alkanolamine solvents, commonly used to absorb CO₂. In order to achieve this comparison, data available in studies about alkanolamine solvents at 303–333 K and 5–50wt.% for alkanolamines solutions were considered. Results show that CO₂ absorption by NH₃ is faster than the one carried out by MDEA, except for 2wt.% NH₃ at 288 K. At 278 K and using aqueous solutions of 3wt.% NH₃, the absorption rate is almost identical to the one reached with MDEA solvent. The highest absorption capacity, also compared with alkanolamine solution, is reached with aqueous solutions of 5wt.% NH₃ at 278 K and 303 K.     

Copper and zinc recycling in Australia: potential quantities and policy options

This paper presents relevant data for industry and governmental policy makers with the aim of increasing the recycling rate of end-of-life copper and zinc in Australia in a technically and economically feasible way. The methodology used to quantify and spatially distribute end-of-life flows of copper and zinc is based on existing and anticipated in-use stocks, their residence times, and their historical and anticipated future evolution. Australia currently (ca. 2000) generates about 72 Gg/year and 57 Gg/year of end-of-life copper and zinc, respectively. Some 70% of all discarded copper and 40% of all discarded zinc generated in Australia are currently being recycled. A detailed assessment shows that about 75% of all end-of-life material in Australia comes from the three states New South Wales, Victoria, and Queensland. In Australia, about 70–75% of waste copper and waste zinc is generated in urban areas. Residential applications account for about 40% (copper) and 60% (zinc) of the generated discards; commercial and industrial applications account for the remainder. By 2030, the discard flows are predicted to increase by about 105% and 155%, to 150 Gg Cu/year and 145 Gg Zn/year, providing substantially increased opportunities for recovery and re-use. Priority targets for the improvement of copper and zinc recycling in Australia are buildings under renovation, urban infrastructure, the transportation sector, and also consumer and business durables. Urban centres are particularly attractive locations for recycling facilities, especially in Perth and Adelaide.     

Disaggregated greenhouse gas emission inventories from agriculture via a coupled economic-ecosystem model

Estimates of regional greenhouse gas emissions from agricultural systems are needed to evaluate possible mitigation strategies with respect to environmental effectiveness and economic feasibility. Therefore, in this study, we used the GIS-coupled economic-ecosystem model EFEM–DNDC to assess disaggregated regional greenhouse gas (GHG) emissions from typical livestock and crop production systems in the federal state of Baden-Württemberg, Southwest Germany. EFEM is an economic farm production model based on linear programming of typical agricultural production systems and simulates all relevant farm management processes and GHG emissions. DNDC is a process-oriented ecosystem model that describes the complete biogeochemical C and N cycle of agricultural soils, including all trace gases.Direct soil emissions were mainly related to N₂O, whereas CH₄ uptake had marginal influence (net soil C uptake or release was not considered). The simulated N₂O emissions appeared to be highly correlated to N fertilizer application (R² = 0.79). The emission factor for Baden-Württemberg was 0.97% of the applied N after excluding background emissions.Analysis of the production systems showed that total GHG emissions from crop based production systems were considerably lower (2.6–3.4 Mg CO₂ eq ha⁻¹) than from livestock based systems (5.2–5.3 Mg CO₂ eq ha⁻¹). Average production system GHG emissions for Baden-Württemberg were 4.5 Mg CO₂ eq ha⁻¹. Of the total 38% were derived from N₂O (direct and indirect soil emissions, and manure storage), 40% were from CH₄ (enteric fermentation and manure storage), and 22% were from CO₂ (mainly fertilizer production, gasoline, heating, and additional feed). The stocking rate was highly correlated (R² = 0.85) to the total production system GHG emissions and appears to be a useful indicator of regional emission levels.     

Biodiversity,carbon stocks and sequestration potential in aboveground biomass in smallholder farming systems of western Kenya

While Carbon (C) sequestration on farmlands may contribute to mitigate CO₂ concentrations in the atmosphere, greater agro-biodiversity may ensure longer term stability of C storage in fluctuating environments. This study was conducted in the highlands of western Kenya, a region with high potential for agroforestry, with the objectives of assessing current biodiversity and aboveground C stocks in perennial vegetation growing on farmland, and estimating C sequestration potential in aboveground C pools. Allometric models were developed to estimate aboveground biomass of trees and hedgerows, and an inventory of perennial vegetation was conducted in 35 farms in Vihiga and Siaya districts. Values of the Shannon index (H), used to evaluate biodiversity, ranged from 0.01 in woodlots through 0.4–0.6 in food crop plots, to 1.3–1.6 in homegardens. Eucalyptus saligna was the most frequent tree species found as individual trees (20%), in windrows (47%), and in woodlots (99%) in Vihiga and the most frequent in woodlots (96%) in Siaya. Trees represented the most important C pool in aboveground biomass of perennial plants growing on-farm, contributing to 81 and 55% of total aboveground farm C in Vihiga and Siaya, respectively, followed by hedgerows (13 and 39%, respectively) and permanent crop stands (5 and 6%, respectively). Most of the tree C was located in woodlots in Vihiga (61%) and in individual trees growing in or around food crop plots in Siaya (57%). The homegardens represented the second C pool in importance, with 25 and 33% of C stocks in Vihiga and Siaya, respectively. Considering the mean total aboveground C stocks observed, and taking the average farm sizes of Vihiga (0.6 ha) and Siaya (1.4 ha), an average farm would store 6.5 ± 0.1 Mg C farm^?1 in Vihiga and 12.4 ± 0.1 Mg C farm^?1 in Siaya. At both sites, the C sequestration potential in perennial aboveground biomass was estimated at ca. 16 Mg C ha^?1. With the current market price for carbon, the implementation of Clean Development Mechanism Afforestation/Reforestation (CDM A/R) projects seems unfeasible, due to the large number of small farms (between 140 and 300) necessary to achieve a critical land area able to compensate the concomitant minimum transaction costs. Higher financial compensation for C sequestration projects that encourage biodiversity would allow clearer win–win scenarios for smallholder farmers. Thus, a better valuation of ecosystem services should encourage C sequestration together with on-farm biodiversity when promoting CDM A/R projects.     

Reducing phosphorus in dairy diets improves farm nutrient balances and decreases the risk of nonpoint pollution of surface and ground waters

Reducing phosphorus (P) in dairy diets may result in different types of manure with different chemical composition. Application of these manures to soils may affect the soil P solubility and lead to different environmental consequences. A laboratory incubation study determined the impact of 40 dairy manures on P dynamics in two soil types, Mattapex silt loam (Aquic Hapludult) and Kalmia sandy loam (Typic Hapludult). The manures were fecal samples of lactating cows, collected from commercial dairy farms located in Northeastern and Mid-Atlantic United States, with a wide range of dietary P concentrations (from 2.9 to 5.8 g P kg⁻¹ feed dry matter, DM). Dried and ground fecal samples were mixed with surface horizon (0–15 cm) of soils at 150 kg P ha⁻¹ and the mixtures were incubated at 25 °C for 21 days. At the end of incubation, water soluble P (WS-P) and Mehlich-3 P (M3-P) in the soil–manure mixtures were substantially higher than the control (soil alone) but were lower than the soils receiving fertilizer KH₂PO₄ at 150 kg P ha⁻¹. Similarly, the relative extractability of P in soils amended with low- and high-P manures was always lower (<93%) than KH₂PO₄ suggesting that fertilizer P is more effective at increasing soil solution P in the short-term. Concentrations of WS-P or M3-P in soil–manure mixtures did not differ regardless of the source of manure (i.e. different farms and different diets). This suggests that when the same amount of P is added to soils through manure applications, the solubility or bioavailability of P in soils will be the same. However, P concentrations in feces correlate significantly with that in diets (r = 0.82^**); and when the manures were grouped into high-P diets (averaging 5.1 g P kg⁻¹) versus low-P diets (3.6 g P kg⁻¹), manure P was 40% greater in the high-P group (10.6 g kg⁻¹ DM) than the low-P group (7.6 g kg⁻¹ DM). Thus, lowering excess P in diets would reduce P excretion in manures, P accumulation in soils, improve P balance on farms, require less area for land disposal, and decrease potential for P loss to waters.     

Fostering pollution prevention in small businesses: the Enviroclub initiative

The Enviroclub initiative was developed by three federal government agencies (Canada Economic Development for Quebec Regions, Environment Canada and the National Research Council Canada) to assist small and medium sized enterprises (SMEs) in improving their profitability and competitiveness through enhanced environmental performance. An Enviroclub consists of a group of 10–15 SMEs, each of which carries out one profitable pollution prevention project. To support this practical experience, business participants attend 4 days of workshops on various themes related to environmental performance, spread out over a period of about 6 months. Enviroclubs have been undertaken in several regions of Quebec, and are delivered by not-for-profit organisations, mainly Enviro-Access and the Centre québécois de développement durable. Projects implemented in seven Enviroclubs brought annual savings of CAD$5.1 million and multiple environmental benefits including annual reductions in resource use, such as water (536,000 m³), petroleum products (225,000 litres), wood (11,300 m³) and emissions, such as greenhouse gases (17,100 tonnes equivalent CO₂), hazardous wastes (708 tonnes) and toxic substances (53 tonnes).     

High speed ball nose end milling of hardened AISI A2 tool steel with PCBN and coated carbide tools

High speed machining (HSM) of tool steels in their hardened state is emerging as an attractive approach for the mold and die industry due to its potential for significant cost savings and productivity improvement. An experimental study was conducted to investigate the tool wear mechanism and surface integrity in high speed ball nose end milling of hardened AISI A2 tool steel using coated tungsten carbide and polycrystalline cubic boron nitride (PCBN) tools. It is found that coated carbide tools can only be used at low speed (120 m/min) while high content PCBN tools are suitable for HSM range (470 m/min). PCBN tools produce a damage free workpiece with better surface finish and less work hardening. Despite the higher tool cost, HSM with PCBN tools lead to reduction in both total cost and production time per part.     

Market-based approaches and tools for improving water and air quality

Nitrogen (N) losses from agriculture are negatively impacting groundwater, air, and surface water quality. National, state, and local policies and procedures that can mitigate these problems are needed. Market-based approaches where waste treatment plants (point sources) can purchase nutrient credits from upstream agricultural operations (non-point sources) to meet their National Pollutant Discharge Elimination System permit requirements within the Clean Water Act are being explored. This paper reviews these market-based approaches for enhancing air and water quality at a lower cost than simple command-and-control regulation, and describes new tools that are being developed, such as Nitrogen Trading Tool (NTT), that can be used to assess nitrogen losses to the environment under different management scenarios. The USDA-NRCS, EPA and several other state and local agencies are interested in these new tools. The NTT, though primarily designed for water quality markets, also estimates savings in nitrous oxide (N₂O) emissions that can be traded in carbon markets. For example, an analysis using NTT shows that for 100 ha of crop land, a C sequestration equivalent of approximately 25–38 Mg C y^?1 for a farm in Ohio, and 13–21 Mg C y^?1 for a farm in Virginia could be achieved with better nitrogen management practices. These numbers across a watershed could be much larger with improved N and conservation management practices that contribute to better water quality and lower global warming potential. There is a need to further develop, calibrate, and validate these tools to facilitate nitrogen and carbon trading future markets around the globe to increase environmental conservation across agro-ecosystems worldwide.     

The role of indicator choice in quantifying the threat of atmospheric ammonia to the ‘Natura 2000’ network

New ‘critical levels’ (CLE) for assessing the effects of atmospheric ammonia on sensitive ecosystems have recently been adopted by the United Nations Economic Commission for Europe (UNECE) of 1 and 3 [2–4] μg NH₃ m^?3 of ambient air (including water vapour), for different species sensitivities and their associated habitats. Based on these values, we examined how indicator choice affects estimates of stock-at-risk in the European ‘Natura 2000’ network.We applied an atmospheric model, FRAME, to estimate surface air concentrations of ammonia at 5 km and 1 km resolution for the UK network of Natura sites, optionally including calibration with the National Ammonia Monitoring Network. As a base indicator, we estimated the overall percentage area of the UK Natura network that exceeded critical level thresholds (‘Area Weighted Indicator’, AWI). We compared this with an alternative approach, estimating the percentage number of Natura sites where the critical level was exceeded (‘Designation Weighted Indicator’, DWI), which we consider more relevant under the terms of the Habitats Directive.Using the AWI (with 1 km calibrated ammonia), we estimate that 11.2%, 1.3% and 0.2% area of the UK Natura network exceeds the critical level values of 1, 2 and 3 μg NH₃ m^?3, respectively. By contrast, using the DWI, the equivalent exceedances are 59.1%, 23.6% and 9.8%. The highest regional exceedance (DWI, critical level 1 μg NH₃ m^?3) was calculated for England (91.9% exceeded), and the lowest for Scotland (24.0% exceeded). High resolution maps show that the larger threat estimated by the DWI approach is explained by (i) an anti-correlation between NH₃ concentration and Natura site area and (ii) the fact that exceedance over part of a Natura site is considered to represent a threat to the integrity of the whole site.     

The social and spatial distribution of temperature-related health impacts from urban heat island reduction policies

Cities are developing innovative strategies to combat climate change but there remains little knowledge of the winners and losers from climate-adaptive land use planning and design. We examine the distribution of health benefits associated with land use policies designed to increase vegetation and surface reflectivity in three US metropolitan areas: Atlanta, GA, Philadelphia, PA, and Phoenix, AZ. Projections of population and land cover at the census tract scale were combined with climate models for the year 2050 at 4 km × 4 km resolution to produce future summer temperatures which were input into a comparative risk assessment framework for the temperature-mortality relationship. The findings suggest disparities in the effectiveness of urban heat management strategies by age, income, and race. We conclude that, to be most protective of human health, urban heat management must prioritize areas of greatest population vulnerability.     

Soil-profile organic carbon and total nitrogen during 12 years of pasture management in the Southern Piedmont USA

Soil organic C (SOC) and total soil N (TSN) sequestration estimates are needed to improve our understanding of management influences on soil fertility and terrestrial C cycling related to greenhouse gas emission. We evaluated the factorial combination of nutrient source (inorganic, mixed inorganic and organic, and organic as broiler litter) and forage utilization (unharvested, low and high cattle grazing pressure, and hayed monthly) on soil-profile distribution (0–150 cm) of SOC and TSN during 12 years of pasture management on a Typic Kanhapludult (Acrisol) in Georgia, USA. Nutrient source rarely affected SOC and TSN in the soil profile, despite addition of 73.6 Mg ha^?1 (dry weight) of broiler litter during 12 years of treatment. At the end of 12 years, contents of SOC and TSN at a depth of 0–90 cm under haying were only 82 ± 5% (mean ± S.D. among treatments) of those under grazed management. Within grazed pastures, contents of SOC and TSN at a depth of 0–90 cm were greatest within 5 m of shade and water sources and only 83 ± 7% of maximum at a distance of 30 m and 92 ± 14% of maximum at a distance of 80 m, suggesting a zone of enrichment within pastures due to animal behavior. During 12 years, the annual rate of change in SOC (0–90 cm) followed the order: low grazing pressure (1.17 Mg C ha^?1 year^?1) > unharvested (0.64 Mg C ha^?1 year^?1) = high grazing pressure (0.51 Mg C ha^?1 year^?1) > hayed (?0.22 Mg C ha^?1 year^?1). This study demonstrated that surface accumulation of SOC and TSN occurred, but that increased variability and loss of SOC with depth reduced the significance of surface effects.