Energy consumption in the Norwegian fisheries

Energy use is of great concern within fisheries, due to both associated environmental effects and the cost of fuel to fishermen. This article explores the scale of energy consumed by most segments of the Norwegian fishing fleet for gadoid fish and for parts of the pelagic fleet for the period 1980–2005. Fuel use is assigned to the different species caught and different fishing gears using economic and mass-based allocation, where data permit. Correlations between variations in energy use and changing catch rates, quotas and oil prices are found. Inverse correlations are found between fuel consumption per kilogram of fish and catch rates on a yearly basis and between fuel consumption and oil prices on a longer term basis. A long term trend towards increased fuel consumption and reduced real prices is observed from the mid 1980s until 2000. This may indicate that low fuel prices do not motivate the development of energy efficient technology in the long run. Increased fuel use may further be used as an indication of over fishing as the correlation between low catch rates and increased fuel consumption is rather strong. Possible means of reducing energy use and emissions are discussed including changing operational strategies, hull forms and the use of alternative energy carriers. A comparison with measures taken in connection with the previous oil crisis around 1980 is done.     

Evaluating national hydrogen refueling infrastructure requirement and economic competitiveness of fuel cell electric long-haul trucks

This study explored the national hydrogen refueling infrastructure requirement along major United States (US) interstate highway corridors to support the deployment of fuel cell electric trucks (FCETs) for the national long-haul trucking fleet. Given the long-haul trucking shipment demand in 2025 projected by the Freight Analysis Framework, locations and capacities of hydrogen stations were identified for inter-zone freight flows, and the total daily refueling demand was estimated for intra-zone flows for each FAF zone. Based on the infrastructure deployment results, we conducted an economic feasibility analysis of FCETs by evaluating the total ownership cost. We found that when the FCET penetration is relatively high (e.g., 10% penetration), FCETs become more competitive in terms of fuel cost and idling cost and could be economic viable if the incremental vehicle cost is reduced to meet the near-term FCET technology cost targets and the liquefaction cost is reduced to an optimal case. We also observed that the station cost depends on regional factors, particularly regional demand, which is used to determine station capacity. Thus, one possible strategy for station roll-out is to have early investment in target regions where station costs are expected to be relatively low such as the Pacific and West South Central regions.

     

Energy and land use impacts of sustainable transportation scenarios

This study compares the land use impacts of sustainable transportation scenarios. Energy efficiency is calculated for four hypothetical, renewable fuel cycles possible for light vehicles: (1) renewable electricity to electrolytic hydrogen to fuel cell vehicles, (2) renewable electricity to battery electric vehicles, (3) biomass gasified to hydrogen to fuel cell vehicles and (4) biomass liquefied to biofuel to fuel cell vehicles. A presumption of 200 W/m² nominal average insolation allows comparison of the fuel cycle efficiencies on a land use basis. The two electricity-based fuel cycles show much higher calculated efficiencies (and lower land uses) than the biomass-based fuel cycles. The use of hydrogen as an energy carrier improves the performance of the biomass resource, but does not show a distinct advantage in performance of the electricity resource. Finally, gross land use is calculated for the particular instance of the U.S. light vehicle fleet, for each of the four fuel cycles.     

Hydrogen and transportation: alternative scenarios

If hydrogen (H₂) is to significantly reduce greenhouse gas emissions and oil use, it needs to displace conventional transport fuels and be produced in ways that do not generate significant greenhouse gas emissions. This paper analyses alternative ways H₂ can be produced, transported and used to achieve these goals. Several H₂ scenarios are developed and compared to each other. In addition, other technology options to achieve these goals are analyzed. A full fuel cycle analysis is used to compare the energy use and carbon (C) emissions of different fuel and vehicle strategies. Fuel and vehicle costs are presented as well as cost-effectiveness estimates. Lowest hydrogen fuel costs are achieved using fossil fuels with carbon capture and storage. The fuel supply cost for a H₂ fuel cell car would be close to those for an advanced gasoline car, once a large-scale supply system has been established. Biomass, wind, nuclear and solar sources are estimated to be considerably more expensive. However fuel cells cost much more than combustion engines. When vehicle costs are considered, climate policy incentives are probably insufficient to achieve a switch to H₂. The carbon dioxide (CO₂) mitigation cost would amount to several hundred US$ per ton of CO₂. Energy security goals and the eventual need to stabilize greenhouse gas concentrations could be sufficient. Nonetheless, substantial development of related technologies, such as C capture and storage will be needed. Significant H₂ use will also require substantial market intervention during a transition period when there are too few vehicles to motivate widely available H₂ refueling.

Development and demonstration of fuel cell vehicles and supporting infrastructure in China

The demand for urban transportation in China, including cars, motorbikes, buses, and trains, is growing substantially. China’s transportation fleet is projected to expand from 16 to 94 million vehicles between 2000 and 2020, with liquid and electricity transport fuel demand growing from about 5 Quadrillion British Thermal Units (Quads) to over 20 Quads in 2035. In response to energy security, economic growth and environmental protection needs, Chinese government agencies, academia and the private sector have organized their programs and investments to advance development and demonstration of sustainable alternative transportation systems. This analysis surveys historic development of fuel cell vehicle (FCV) including fuel cell buses (FCB) technology in China, summarizes recent efforts to scale-up FCV development and associated infrastructure in major Chinese cities, and briefly addresses future directions in Chinese fuel cell and hydrogen energy technology development. Since the late 1990’s, Chinese universities, government institutions and the private sector have implemented research, development, demonstration and deployment programs for electric (EV), fuel cell (FCV), and hybrid electric vehicles (HEV). These efforts have advanced the feasibility of FCVs to be a part of sustainable urban transportation system, including technical performance, infrastructure, and customer acceptance. Three generations of FCVs, START I, START II and START III have been developed, demonstrated and deployed. Similarly, several generations of FCBs have been developed and demonstrated. Collectively, these efforts have demonstrated and deployed over 1,000 FCBs and FCVs in several Chinese cities. Large-scale, intensive-use FCV and FCB demonstration trials, including those during the 2008 Beijing Olympics and the 2010 Shanghai World Exposition (EXPO), have been successfully built and operated. Infrastructure, such as hydrogen production facilities, fuelling stations, and maintenance stations have been constructed and operated to support the fleets of FCBs and FCVs. Experiences learned from these FCV research, development, and demonstration activities are the foundation for scaling up infrastructure and fleet trials in a growing number of cities in eastern and western China. An aggressive research and development vision and 2020 technology performance targets provide a foundation for the next generation of EVs, FCVs and HEVs, and, options for China’s efforts to develop a portfolio of sustainable transportation systems.     

郑州市公交车队电动化减污降碳环境效益

公交车队电动化是道路交通部门实现减污降碳的重要手段,评估当前公交车队电动化减排成效,对推进大中型城市公交全面电动化具有重要参考意义.基于燃料生命周期法分析了郑州市公交车队电动化前后CO₂和污染物排放特征,并评估了不同电动化情景下的车队排放.结果表明,本轮电动化使公交车队燃料生命周期内CO₂和PM_2.5排放量分别增长32.6%和42.6%,CO、NO_x和VOC排放量下降了28%,34%和25%.优化发电结构对于电动化过程中的CO₂及PM_2.5减排尤为重要,在全面电动化和发电结构优化的最佳情景下,CO₂、CO、NO_x、VOC和PM_2.5减排可达38.7%、80.1%、84.4%、92.2%、30.2%.在全面电动化进程中,应优先对中长里程线路车辆进行电动化替换,此外,插电混动天然气车型的纯电动化替换对减排利弊兼有,同步推进车队替换和电力结构调整进程才能实现减污降碳协同增效.     

氢燃料电池汽车动力系统生命周期评价及关键参数对比

发展氢燃料电池汽车被认为是解决能源安全和环境污染问题的理想解决方案之一,为量化探究氢燃料电池汽车动力系统的化石能源消耗和排放情况,运用GaBi软件建模,以新能源汽车相关技术路线为参考,构建我国氢燃料电池汽车动力系统的数据清单并对其全生命周期化石能源消耗和全球变暖潜值情况进行定量评价计算和预测分析,对不同类型的双极板、不同能量控制策略和不同制氢方式对环境的影响分别进行了对比研究,并对关键数据进行了不确定分析.结果表明,预计到2030年我国每台氢燃料电池汽车动力系统生命周期的化石能源消耗量（ADP_f）、全球变暖潜值（GWP,以CO₂ eq计）和酸化潜值（AP,以SO₂ eq计）分别为1.35×10⁵ MJ、9108 kg和15.79 kg.动力系统生产制造阶段的化石能源消耗和全球变暖潜值均高于使用阶段,主要原因是燃料电池堆栈和储氢罐的制造过程.金属双极板、石墨复合双极板和石墨双极板的制造工艺中石墨复合双极板的综合环境效益最好.能量控制策略的优化会使得氢能消耗降低,当氢能消耗降低22.8%时,动力系统的生命周期化石能源消耗和全球变暖潜值分别降低10.4%和8.3%.相比于甲烷蒸气重整制氢,基于混合电网电解水制氢的动力系统生命周期全球变暖潜值高出53.7%[KG-*6],而基于水电电解水制氢降低39.6%.降低动力系统生命周期化石能源消耗和全球变暖潜值的措施包括优化能量控制策略降低氢能消耗、规模化发展可再生能源发电电解水制氢产业和聚焦突破燃料电池堆栈关键技术实现性能提升.     

The Energy and Environmental Benefits of Superconducting Power Products

Superconductivity has the potential to bring a more fundamental change to electric power technologies than has occurred since electricity use became widespread nearly a century ago. The potential is for an energy revolution as profound as the impact fiber optics has had on communications. The fiber optic ‘information superhighway’ was constructed by replacing copper wires with a higher capacity alternative. Superconductivity provides an ‘energy superhighway’ that greatly improves efficiency and capacity. The economic and energy impacts of superconductors are predicted to be huge. Many challenges are being addressed in order for superconductivity to play this important role in the electric power system. The difficult challenge is underway in many countries to manufacture electrical wire from the ceramic high-temperature superconducting (HTS) materials, while in parallel, super-efficient power devices that use these wires are being designed and demonstrated in field trials. The benefits can be substantial: HTS wires that are a resistance-free alternative to conventional wires while carrying 100 times the amount of electricity; oil-free electrical equipment that is environmentally benign, with half the energy losses and half the size of conventional alternatives; and addressable markets estimated to exceed US$10 billion per annum within the next two decades. The savings due to increased efficiency of HTS electric power products may exceed 36 million metric tons of CO₂ in Japan, and much higher numbers in the U.S. and Europe, if generation continues to rely upon fossil fuels.     

燃料电池汽车燃料储运方案经济性分析

综合案例研究结果，结合氢气、甲醇在不同储运方式时的成本，从固定设计成本、尾气排放、燃料价格、汽车造价4个方面比较了氢气、甲醇、汽油3种燃料电池汽车的经济性。结果表明：（1）直接氢燃料电池是燃料电池汽车的首选动力；（2）天然气重整制氢是目前氢燃料电池汽车获得燃料优先考虑的方式；（3）高压氢气、液氢是当前燃料电池汽车的首选燃料。     

京津冀地区机动车细颗粒物污染的健康影响分析

机动车尾气排放对城市空气污染的影响日益严峻，而对特定污染源大气污染排放特征及健康影响进行评估可以为环境空气质量管理提供科学依据.以PM_2.5为研究对象，分析京津冀地区2010～2020年机动车污染排放特征、导致的健康效应与经济损失.结果表明，2010～2020年间京津冀地区机动车PM_2.5排放量呈现先逐年递增后缓慢下降的趋势；不同车型污染物排放贡献率显示，重型货车和重型客车为PM_2.5主要贡献车型；不同城市机动车污染物排放特征存在差异，北京市污染物贡献率下降幅度明显，其余城市污染减排也不容忽视.机动车PM_2.5污染对人群健康影响的评估结果表明，京津冀地区各健康终端发生人数总体呈上升趋势，其中，2020年PM_2.5污染造成约34 337人(95%CI:9 025～57 209人)早逝、4.55万人(95%CI:1.08～8.02万人)住院、 28.23万人(95%CI:14.05～41.63万人)门诊及43.90万人(95%CI:16.03～67.92万人)患病；研究期间(201...     

CO<Subscript>2</Subscript> Mitigation and Renewable Oil from Photosynthetic Microbes: A New Appraisal

The only major strategy now being seriously considered for biological mitigation of atmospheric CO₂ relies entirely on terrestrial plants. Photosynthetic microbes were the focus of similar consideration in the 1990s. However, two major government-sponsored research programs in Japan and the USA concluded that the requisite technology was not feasible, and those programs were terminated after investing US$117 million and US$25 million, respectively. We report here on the results of a privately funded US$20 million program that has engineered, built, and successfully operated a commercial-scale (2 ha), modular, production system for photosynthetic microbes. The production system couples photobioreactors with open ponds in a two-stage process – a combination that was suggested, but never attempted – and has operated continuously for several years to produce Haematococcus pluvialis. The annually averaged rate of achieved microbial oil production from H. pluvialis is equivalent to <420 GJ ha ^-1 yr^-1, which exceeds the most optimistic estimates of biofuel production from plantations of terrestrial ``energy crops.' The maximum production rate achieved to date is equivalent to 1014 GJ ha^-1 yr^-1. We present evidence to demonstrate that a rate of 3200 GJ ha^-1 yr^-1 is feasible using species with known performance characteristics under conditions that prevail in the existing production system. At this rate, it is possible to replace reliance on current fossil fuel usage equivalent to ∼300 EJ yr^-1 – and eliminate fossil fuel emissions of CO₂ of ∼6.5 GtC yr^-1 – using only 7.3% of the surplus arable land projected to be available by 2050. By comparison, most projections of biofuels production from terrestrial energy crops would require in excess of 80% of surplus arable land. Oil production cost is estimated at $84/bbl, assuming no improvements in current technology. We suggest enhancements that could reduce cost to $50/bbl or less.     

珠江口湾区靠港船舶转用低硫油的成本与环境效益

船舶对区域大气污染的贡献备受关注.为控制船舶大气污染物排放,推进我国靠港船舶转用低硫油,以珠江口湾区为案例区,在利用统计分析法确定船舶辅机功率、靠港时间等关键参数的基础上,采用燃料动力法估算靠港船舶转用低硫油的经济成本与环境效益.结果表明:①珠江口湾区靠港船舶燃油消耗量大,2015年珠江口湾区船舶在靠港期间的总耗油量达31.35×104 t.②珠江口湾区靠港船舶转用低硫油的环境效益显著.2015年珠江口湾区大于3 000 DWT（载重吨）的靠港船舶转用w（S）（硫含量）为0.5%的燃油时,PM₁₀、PM_2.5、NO_x、SO_x排放量分别减少792.8、729.1、566.3、6 979.9 t;转用w（S）为0.1%的燃油时,PM₁₀、PM_2.5、NO_x、SO_x排放量分别减少835.3、792.8、1769.7、8 155.0 t.③靠港船舶转用低硫油会增加船东的成本.2015年珠江口湾区大于3 000 DWT靠港船舶都转用w（S）为0.1%的燃料油,因燃油价格差导致的额外成本为2.29×108元.在目前航运经济不景气的背景下,可通过财政补贴方式鼓励船东转用低硫油.参照深圳对靠港船舶转用低硫油的补贴政策,2015年大于3 000 DWT靠港船舶转用w（S）为0.5%的燃油时需补贴资金1.71×108元,转用w（S）为0.1%的燃油时需补贴资金2.29×108元.研究显示,靠港船舶转用低硫油能显著降低大气污染物排放,但转用低硫油需要船东承担一定的经济成本,政府应通过补贴等激励方式,逐步推进靠港船舶转用低硫油.      

SO2 and NOx emissions due to fossil ruel combustion in Saudi Arabia: A preliminary inventory

Phenomenal economic growth during the last two decades, as a result of oil wealth, has led to a dramatic increase in the demand for fossil fuel in the Kingdom of Saudi Arabia (KSA). In this paper a preliminary inventory for sulfur dioxide (SO₂) and nitrogen oxides (NO_x) emitted into the atmosphere as a result of fossil fuel combustion by various economic sectors in KSA in the year 1986 is presented. Emissions are discussed in relation to major source categories (major fuel consuming economic sectors) and on the basis of type of fuel combusted. The data are also geographically disaggregated according to major economic and population centers in KSA in order to show the spatial distribution of emissions. Also, SO₂ and NO_x emission trends (1971–1990) were estimated from 1986 data and historical and projected fuel consumption figures.     

Reduction in ecological cost through biofuel production from cooking oils: An ecological solution for the city of Campinas, Brazil

The aim of the present study was to produce biodiesel from mixtures of cooking oil and provide a possible environmental solution for the region of Campinas (state of São Paulo, Brazil) based on the theory of environmental cost accounting (ECA). Cooking oil collected from homes in Campinas was mixed with ethanol at a ratio of 7:1 and transesterified at 60 °C for one hour for the obtainment of biodiesel using NaOH as a catalyst. The results of the physicochemical analyses demonstrated that the biodiesel possessed characteristics close to those required by Brazilian standards. A recent survey carried out in the city of Campinas revealed that residents are not concerned with the increased of environmental impact and ecological costs in the region caused by the disposal of used cooking oil, which is discarded in sewers and soil. Urgent action is recommended, beginning with raising awareness among the population and the implementation of a policy to determine the storage, periodic collection and use of cooking oil for the production of biodiesel. This fuel could be used for buses, trucks and machines or sold to fuel distributors, offering a savings of US$ 0.8 to 4.5 millions. Campinas could then gain environmental credits and become a sustainable city. Moreover, used cooking oil constitutes low-cost biodiesel with no consumption of raw materials and will reduce worldwide criticism directed at Brazil regarding the use of oleaginous plants for biodiesel production.     

The effect of aircraft emissions on tropospheric ozone in the northern hemisphere

The effect of aircraft emissions on tropospheric ozone was studied using a two-dimensional zonal model, of longitude vs altitude, extending between 30°–60°N. An emission inventory for the 1987 civil aircraft fleet was constructed based on fuel usage and civil aviation statistics. The addition of the 1987 civil emissions to a modelled standard atmosphere caused increases in concentrations of O₃ (12%; 10 ppbv), NO_x (40%; 20 pptv) and OH (10%) between 8 and 12 km altitude. A doubling and tripling of the emissions corresponding to a present day inclusion of military aircraft and a future scenario, respectively, caused the increase in O₃ to double (19%) and almost triple (25%). The lightning source of NO_x was found to be an important parameter. When this source was ommitted the change in O₃ at the cruise flight altitude increased to 16%, with respect to a standard atmosphere not containing a lightning source of NO_x.     

不同品质燃油对公交车道路颗粒排放特征的影响

以国Ⅳ排放柴油公交车为样车,研究了3种燃油公交车的颗粒数量排放特性. 3种燃油分别为纯柴油、B20燃油〔V(生物柴油)∶V(纯柴油)=2∶8〕和G20燃油〔V(天然气制油)∶V(纯柴油)=2∶8〕. 结果表明:公交车燃用3种燃油的排气颗粒数量随粒径变化均呈双峰对数分布,其中核态颗粒数量峰值粒径均为10.8 nm;聚集态颗粒数量峰值粒径则因燃料差异而不同,其中纯柴油、B20燃油和G20燃油分别为80.6、69.8和60.4 nm. 对于不同类型道路,在公交车燃用纯柴油时,其快速路下的排气颗粒数量(7.35×1015 km-1)最低,分别比主干道和次干道低47.7%和55.1%. 对于不同品质燃油而言,在全程测试线路内,燃用G20燃油的公交车排气颗粒总数量(6.92×1015 km-1)最低,较纯柴油和B20燃油分别降低了42.5%和32.4%. 其中,G20燃油排气中核态颗粒数量为1.81×1015 km-1,较纯柴油和B20燃油分别降低了3.1%和15.4%,而聚集态颗粒数量则分别降低了49.7%和37.0%. 表明公交车燃用天然气制油可有效降低颗粒排放.      

中国水泥工业CO2排放现状及减排对策

水泥工业是中国制造业中温室气体CO2的主要排放源,因此,根据水泥生产的基本原理和工艺特点,建立了CO2排放的数学模型并确定排放强度,计算了2001—2010年中国水泥工业CO2的排放量,分析了影响CO2排放量的主要因素及其发展趋势,并提出水泥工业CO2减排对策.结果表明,中国水泥工业CO2排放总量逐年增长,与水泥产量和单位产品原料、燃料消耗定额呈线性关系;在CO2排放总量中,原料煅烧和燃料燃烧阶段的排放量分别占49%和51%;"十一五"期间单位水泥产品CO2排放强度由0.69t.t-1下降到0.65t.t-1.万元GDPCO2排放量呈下降趋势,2008年达到最低值为0.3054t,平均每年万元GDPCO2排放量下降10.69%,说明水泥工业10年间实施节能降耗、资源循环利用、提高经济效益等措施对于减少CO2排放具有明显效果.     

State-By-State Carbon Dioxide Emissions from Fossil Fuel Use in the United States 1960–2000

Time series of fossil fuel carbon emissions from 1960–2000 for each of the U.S. states and the District of Columbia are presented and discussed. Comparison of the nationally summarized results with other national datasets shows generally good agreement, usually within 2%, and gives insight into the quality of all the data series. Our extension of the state-by-state emissions estimates back to 1960 reveals patterns of change that are coherent across states and can be related to historic events such as energy crises and federal legislation. Most notable is the changing pattern of coal usage, as coal-producing states produce increasingly more energy (mostly for electricity) for other states so that per capita CO₂ emissions diverge for states that import as opposed to those that export electricity. The decline in carbon emissions from petroleum products following the 1970s is also evident. Per capita emissions range over an order of magnitude for the different states. The data suggest that differences in per capita emissions arise from differences in many technological, physical, resource, social, and economic factors. The data presented here and the few correlations briefly noted pose a challenge for trying to use per capita emissions as a measure of equity or to provide mitigation targets.     

Predicting vehicle fuel consumption patterns using floating vehicle data

The status of energy consumption and air pollution in China is serious. It is important to analyze and predict the different fuel consumption of various types of vehicles under different influence factors. In order to fully describe the relationship between fuel consumption and the impact factors, massive amounts of floating vehicle data were used. The fuel consumption pattern and congestion pattern based on large samples of historical floating vehicle data were explored, drivers'' information and vehicles'' parameters from different group classification were probed, and the average velocity and average fuel consumption in the temporal dimension and spatial dimension were analyzed respectively. The fuel consumption forecasting model was established by using a Back Propagation Neural Network. Part of the sample set was used to train the forecasting model and the remaining part of the sample set was used as input to the forecasting model.