Identification of best available techniques in the seafood industry: a case study

A Best Available Techniques (BAT) analysis of a mussel canning processing facility in northwest Spain was undertaken to investigate potential cleaner production and efficiency improvements. Potential techniques were identified from the literature and from our experience in the seafood sector. BATs were then assessed for possible implementation in a mussel canning facility. This work describes, in considerable detail, the advantages and disadvantages of the techniques discussed.     

抑食金球藻对翡翠贻贝生长及摄食的影响研究

在室内以翡翠贻贝（Perna viridis）为对象,研究单种抑食金球藻（Aureocuccos anophagefferens）及其与亚心形四爿藻（Tetraselmis subcordiformis）混合藻液条件下抑食金球藻对贻贝的生长和摄食的影响。结果表明,抑食金球藻对翡翠贻贝的生长和摄食均有显著的负面影响。单种高、中浓度抑食金球藻组贻贝的鲜重、干重及无灰分干重均显著低于混合藻组,贻贝的个体生长条件指数（CI）下降明显,其下降率甚至高于饥饿组。混合藻组中贻贝的CI、软组织的鲜重、干重、无灰分干重等均显著低于对照组,其抑制程度与混合藻组中抑食金球藻浓度有关,当混合藻组中抑食金球藻浓度较大时（≥ 4×105 cells/mL）,贻贝的上述指标更低。四组混合藻中贻贝的摄食率也均显著低于对照组,抑食金球藻对贻贝的抑食作用也与其藻细胞密度有关,混有较高密度抑食金球藻组中贻贝的摄食率更低,说明抑食金球藻并非因其个体太小而不能被贝类正常摄食,可能产生了某种生物活性物质抑制了贻贝的摄食和生长,亚心形四爿藻能在一定程度上可以缓解抑食金球藻对贝类摄食和生长的抑制作用。     

重污染天气下电力行业排放对京津冀地区PM2.5的贡献

利用CAMx(区域空气质量模型)中的PSAT(颗粒物源示踪技术),分析了重污染天气下分区域、分行业的污染物排放对京津冀地区PM_2.5的贡献,设计了分行业排放的环境影响效率系数(EESCR)计算方法,并对“电能替代”(以电力行业产能替代民用能源消耗)情景方案下的排放进行模拟分析. 结果表明:在重污染天气背景下,电力行业排放对京津冀地区ρ(PM_2.5)的贡献率较低,各地均低于10%,并且区域排放的贡献次序为京津冀以外地区>京津冀其他城市>当地,这与电力行业高架源排放的特征有关,而工业和民用行业对区域排放的贡献次序相反. PM_2.5主要组分和前体物的分行业EESCR计算结果表明,电力行业ESSCR值均在y=1/2x趋势线之下,远低于其他行业,因此优先控制其他行业排放才是改善京津冀地区空气质量的关键.电能替代的情景模拟结果表明,电能替代是有效降低京津冀地区ρ(PM_2.5)的可行方式. 研究显示,充分利用电力行业高架源排放的特点和便于集中处理的行业优势,尽力降低因产能增长带来的排放增量,实施电能替代可成为改善区域空气质量的有效途径之一.      

Life cycle assessment of coated white board: a case study in China

Life cycle assessment was carried out using IMPACT2002+ to estimate the environmental impact of coated white board production, which is common in China. Normalized results showed that the potential impacts of respiratory inorganics, terrestrial ecotoxicity, global warming, and non-renewable energy had a dominant contributions to overall environmental impact. Specifically, emissions from chemical and energy production processes exhibited higher potential impact (more than 80% of the total contribution) on the environment than that of emissions generated from transport, landfill, wastewater treatment, and paper plants infrastructure. Energy recovery from black liquor and energy generation based on natural gas are key factors in reducing overall environmental potential impact. The current paper presents improvements on the environmental performance of a coated white board production site in China.     

Using corporate social responsibility benchmarking framework to identify and assess corporate social responsibility trends of real estate companies owning and developing shopping centres

Shopping centres that include retail activities have come in for criticism as to their environmental, architectural and social impacts. However, the sector has been applying corporate social responsibility (CSR) practices. In an attempt to identify the best practices regarding CSR and trends therein we developed a CSR benchmarking of companies from the real estate sector owning and developing shopping centres. Based on information from websites, annual, environmental and sustainability reports, and customer services department’s information, in 2004 and 2010, a comparative CSR benchmarking was performed on 23 real estate companies with shopping centres based in Europe, China, Australia and the USA. The CRS benchmarking framework focused on reported CSR practices and included categories and sub-categories of evaluation in four domains: (1) external results, (2) internal results, (3) management processes and (4) learning and innovation. The framework was inspired by the sustainability balanced scorecard structure. The United Kingdom real estate sector’s companies studied did relatively well when evaluated by the framework used in this study. The highest ranked real estate companies applied sustainable or environmental buildings standards and did show a commitment to transparency and CSR disclosure. The positive evolution of CSR practices in the 23 companies studied in 2004 and 2010 may reflect efforts to improve competitiveness and the reputation of the companies with shopping centres through CSR initiatives.     

Immunotoxic potential of aeration lagoon effluents for the treatment of domestic and hospital wastewaters in the freshwater mussel Elliptio complanata

Municipal wastewaters are major sources of pollution for the aquatic biota. The purpose of this study was to determine the levels of some pharmaceutical products and the immunotoxic potential of a municipal wastewater aeration lagoon for the treatment of the domestic wastewaters of a small town with wastewater inputs from a 400-bed hospital complex. Endemic mussels were collected, caged and placed in the final aeration lagoon and at sites 1 km upstream and 1 km downstream of the effluent outfall in the receiving river for a period of 14 days. The results showed that the final aeration lagoon contained high levels of total coliforms, conductivity and low dissolved oxygen (2.9 mg/L) as well as detectable amounts of trimethoprim, carbamazepine, gemfibrozil, and norfloxacin at concentrations exceeding 50 ng/L. The lagoon effluent was indeed toxic to the mussel specimens, as evidenced by the appearance of mortality after 14 days (10% mortality), decreased mussel weight-to-shell-length ratio and loss of hemocyte viability. The number of adhering hemocytes, phagocytic activity, total nitrite levels and arachidonic cyclooxygenase activity were significantly higher in mussels placed in the final aeration lagoon. A multivariate analysis also revealed that water pH, conductivity, total coliforms and dissolved oxygen were the endpoints most closely linked with phagocytic activity, the amount of adhering hemocytes and loss of hemocyte viability. In conclusion, exposure of mussels to treated aerated lagoon wastewater is deleterious to freshwater mussels where the immune system is compromised.     

Carbon footprint of canned mussels from a business-to-consumer approach. A starting point for mussel processors and policy makers

The increasing demand for environmental information on the global warming impact of products requires a solid methodological framework which guarantees comparability and communicability. The publicly available specification PAS 2050 combines approaches to a variety of greenhouse gas specific assessment issues to deliver a globally applicable product Carbon Footprinting (CF) method, which is expected to be widely accepted. Specifically, this paper aims to demonstrate the implementation of a CF scheme for a common canned mussel product according to PAS 2050 guidelines. A final value of 4.35 kg CO₂e per triple pack of round cans of mussels was calculated. Furthermore, this CF study led to identify primary packaging (can production) and mussel shell management as the main activities where efforts should focus for climate change mitigation. Throughout this case study, CF opportunities and drawbacks are discussed. The whole text tries to provide a starting point for both mussel processors and policy makers to benefit from the potential advantages of a responsible use of this increasingly popular tool.     

Heat Inactivation of Hepatitis A Virus in Shellfish Using Steam

Shellfish are an important cause of foodborne viral illness. Consumer-friendly cooking recommendations for shellfish could improve food safety and decrease the risk for infection from contaminated products. Thermal inactivation parameters were established for hepatitis A virus (HAV) in mussels and validated with cooking experiments. Steaming for only 2–5 min was not sufficient to inactivate HAV in mussels in all layers of a steamer. Steaming mussels for 6 min was sufficient to inactivate HAV in all layers. These cooking guidelines produce shellfish with a reduced risk for foodborne virus transmission.     

食用油聚酯包装的生命周期评价

采用生命周期评价法研究了食用油聚酯(PET)包装的生命周期环境影响,并对不同处置方式的环境影响进行比较评价. 通过现场和资料调研的方式获得所有生命周期阶段的能量物质的输入、输出和环境外排数据. 结果表明:PET包装原料获取阶段的环境影响潜值在全生命周期环境影响潜值中所占比例极高,占处置前环境影响潜值的81.8%. PET包装的全生命周期环境影响类别主要集中在化石燃料、无机物对人体损害和气候变化3个方面;在致癌、生态毒性和酸化/富营养化等方面的影响较小. 3种主要处置方式的环境影响潜值为焚烧＞填埋＞再生,其中焚烧和填埋分别增加PET包装处置阶段前环境影响潜值的5.1%和3.6%,而再生可降低63.9%.      

Carbon footprint of food - approaches from national input-output statistics and a LCA of a food portion

The aim of the study, on which this paper is based, was to provide guidance to consumers to make environmentally responsible choices in their food consumption, to assist food supply chain stakeholders to identify the key areas for environmental improvements, and to provide policy makers with a tool for monitoring the potential impacts on climate change resulting from developments within the food sector. At the macro level, the EIO-LCA model was developed specifically for the Finnish food chain; at the micro level, LCAs were performed on 30 lunch portions. The contribution of the Finnish food chain to climate change was 14%, which comprised 40% CO₂ emissions, 25% CH₄ emissions, and 34% N₂O emissions. The share of impacts from domestic agricultural processes was the highest, at 69%. The impact of a single lunch portion ranged between 0.65 and 3.80 kg of equivalent CO₂. According to the EIO-LCA model, the average impact was 7.7 kg CO₂ eq/person daily. The consumer phase accounted for between 8 and 47% of the climate change impacts for homemade portions. In ready-to-eat portions industry and retail phases were emphasized, representing 25-38% of climate change impacts. We present an approach to steer the Finnish food sector onto an environmentally sustainable path; practical tools for consumers and farmers will especially need to be developed further.     

水泥窑协同处置工业废弃物的生命周期评价

以废白土、废催化剂和污染土壤等工业废弃物为研究对象,运用生命周期评价(LCA)方法,对水泥窑协同处置废弃物的环境影响进行评价.通过建立生产过程输入、输出清单,从全球变暖潜值、资源消耗潜值、人体毒性潜值等方面,基于Gabi5.0软件进行建模与计算,对水泥窑常规生产工艺与协同处置工业废弃物工艺产生的环境影响进行比较.结果表明:功能单位(1 t)水泥的生产过程中,常规生产工艺和协同处置工艺的环境影响潜值分别为5.78×10~(-11)和5.61×10~(-11),协同处置工艺使得全生命周期环境影响潜值降低了2.94%;水泥生产过程最主要的环境影响是全球变暖和人体毒性,其中,协同处置工艺下这两种环境影响分别降低了0.80%和1.80%,资源消耗相比常规生产降低了11.1%;从全生命周期看,水泥生产中熟料煅烧阶段对环境的影响最大,协同处置工艺下熟料煅烧阶段的环境影响相比常规生产降低了8.0%.协同处置工艺相比常规生产工艺有更好的环境效益.     

A world model of the pulp and paper industry: Demand,energy consumption and emission scenarios to 2030

This article introduces a bottom-up global model of the pulp and paper sector (PULPSIM) with a focus on energy consumption and carbon emissions. It is an annual recursive simulation behavioural model with a 2030 time horizon incorporating several technological details of the industry for 47 world regions. The long time horizon and the modular structure allow the model users to assess the effects of different environmental, energy and climate policies in a scenario comparison setup. In addition to the business as usual developments of the sector, a climate commitment scenario has been analysed, in which the impacts of changing forest management practices are also included. The climate scenario results reveal that there is a significant carbon reduction potential in the pulp and paper making, showing a number of specific features: the central role of the fibrous resource inputs and the potential impact of increased waste wood and black liquor based heat generation.     

Estimated chemical usage by manufacturers in Connecticut

Background

There is little available data on chemical use patterns by companies, with few federal requirements for reporting. This results in difficulties for targeting toxics for possible substitution, assisting employers with complying with newer international regulations, and decreased ability to estimate health and environmental impacts.

Methods

Massachusetts chemical use data for manufacturers required under the Toxics Use Reduction Act (TURA) was acquired, with corresponding information on industrial sector classification and employment levels by sector for both Massachusetts (MA) and Connecticut (CT). The MA chemical data was adjusted based on the ratio of employment levels by sector for CT compared to MA to give estimates of chemical usage by sector in CT.

Results

It was estimated that there was over 660 million pounds of chemicals used in CT, with over 300 million pounds each of carcinogens and reproductive hazards (categories overlap). The most common chemicals estimated to be used were styrene monomer (266 million lbs.), sodium hydroxide (60 million lbs.), and methanol (50 million lbs.). The industrial sub-sectors estimated with the highest chemical usage were chemical manufacturing, plastics and rubber products manufacturing, and fabricated metal product manufacturing.

Conclusion

There is extensive chemical use in CT manufacturing, but little direct information on actual use patterns.     

生命周期视角下2种餐厨垃圾资源化处理方案的对比分析

以唐山和厦门2处餐厨垃圾处理厂为例,利用Simapro软件中IMPACT2002+方法对2种不同餐厨垃圾处理模式作特征化、标准化以及归一化分析。同时,针对不同处理模式的经济效益开展评价。结果表明:案例1（唐山）在水生生态毒性、非可再生资源、陆地生态毒性等13个中点指标环境影响结果占优;案例1（唐山）与案例2（厦门）的总环境影响潜值分别为-26,22.7mpt。因此,案例1的环境效益占优;案例1比案例2的投资回收期更短,经济效益更佳。     

Eco-toxicological impact of “metals” on the aquatic and terrestrial ecosystem: A comparison between eight different methodologies for Life Cycle Impact Assessment (LCIA)

The assessment of eco-toxicological impacts related to the emission of contaminants into the environment has peculiar characteristics in the context of Life Cycle Assessment (LCA), and many different Life Cycle Impact Assessment (LCIA) methodologies can be used. However, previous studies recognized the presence of high uncertainties in the process, in particular when the analysis focuses on metal emissions. Metals are diverse inorganic substances relevant for their characteristic environmental chemistry, their high persistency into the environment and their toxicity at even low environmental concentrations. This study aims at expanding the discussion about how, and how differently, various methods for LCIA are estimating the impacts related to metals emissions, with a focus on eco-toxicological impacts. A comparison between eight different LCIA methods is presented in relative terms, using a contribution analysis at two levels: general and specific. Results show that there is a poor agreement between methods in the determination of the total eco-toxic impact attributable to metals, and in defining which metal provokes the highest eco-toxic impact per unitary emission. Furthermore, the characterization phase is critical in determining the disagreement between methods. However, some similarities were found: there is the tendency in most methods to associate the largest share of the total eco-toxicological impacts to metals. Theoretical and practical differences between methods are discussed and suggestions for the choice of the proper, case-specific, LCIA method are provided.     

多晶硅光伏组件生产可持续性评价

分别采用了全生命周期评价软件、全生命周期成本法、社会性指数评价法,对我国多晶硅光伏组件生产阶段的环境影响、经济性和社会性影响进行了定量评估.结果表明:多晶硅生产、多晶硅电池片生产、电池组装3个阶段的环境影响相对较大,其中多晶硅生产阶段对气候变化的贡献率在50%以上.经济成本分析显示,原料和劳动力的成本占总成本的70%以上.多晶硅电池片生产阶段的成本在光伏组件生产过程的5个阶段中所占的比重最大.社会性影响分析结果显示,在光伏组件生产中,劳动岗位增加的贡献指数值为0.72,劳动力就业贡献较大,而生产能力提高的贡献指数值仅为0.18,显示生产能力提高的贡献较小.研究显示,为提高多晶硅光伏组件的可持续性,在生产过程中需寻找清洁能源、寻找环保替代材料以降低环境影响;积极鼓励支持企业进行技术研发创新,着力提高电池转换效率以降低生产成本;通过市场良性竞争提高多晶硅光伏行业的社会贡献.      

Evaluation of the sustainability of swine manure fertilization in orchard through Ecological Footprint Analysis: results from a case study in Italy

Ecological Footprint Analysis (EFA) is an environmental accounting system, in physical unit, able to quantify the total amount of ecosystem resources required by a region or by a production process. This methodology is both scientifically robust and widely diffused for territorial and productive analysis. The application of EFA to agricultural systems are still uncommon and examples in the fruit sector rare.In this work a detailed application of EFA to an experimental trial in a commercial nectarine orchard in Piedmont (Italy) is presented. The field trial is focused on the evaluation of agronomical benefit of various kinds of swine manure for fertilizing orchards. Four productive systems were established from 2008: liquid slurry (LS), covered slurry (CS), solid fraction (SF), mineral nutrition (MN). All the environmental impacts of the four systems were quantified both directly on field and with extrapolations from farmer knowledge. As previous studies suggested, we considered not only the one-year field operations, but also the whole lifetime of the orchard. The environmental costs of each system are presented and related to each other on the basis of their relative footprint value.Results highlight almost the same ecological footprint for the three manure fertilized systems (LS, CS and SF) with average of 0.96 gha t⁻¹) and the highest ecological footprint can be found in the MN system (1.14 gha t⁻¹). Interesting remarks can be done comparing the contributions to the ecological footprint of the field operations related to fertilization in the four systems. In the manure fertilized systems the fertilizer contribution goes from 0.9% to 1.2% of the total ecological footprint; but in the MN system the fertilizer contribution is 6.6% of the total ecological footprint. Results support the hypothesis that internal recycle and connections among different systems increasingly resulted in high system benefit and sustainability.     

Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors

The industrial sector is the biggest electricity consumer in Malaysia. Electric motors account for more than 45% of the electricity consumption in the industrial sector in the country. Therefore, it is very important to implement energy efficiency standards for electric motors to reduce energy consumption growth in this sector. This paper attempts to calculate the cost efficiency analysis and emission reduction by implementing energy efficiency standards for electric motor in Malaysia. The energy efficiency standards are proposed based on the efficiency of electric motors from survey data. The study examines the potential energy, economical and environmental impacts of the implementation of energy efficiency standards for electric motors in three scenarios i.e. 0.5%, 1.0% and 1.5% of standards efficiency improvement. Standards also enable consumers to reduce their electricity bill and contribute to a positive environmental impact.     

Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications

This study analyzes the options for meeting power demand in the Brazilianpower sector through the year 2015. Three policy cases are constructedto test economic and environmental policy measures against a baseline:advanced technologies scenario, environmental control scenario and carbon(C) elimination scenario. Least-cost modeling simulated these scenarios throughchanges in emissions fees and caps, costs for advanced technologies,demand side efficiency, and clean energy supplies. Results show that, in theabsence of alternative policies, new additions to Brazil's electric powersector will shift rapidly from hydroelectricity to combined-cycle natural gasplants. When the cost of environmental impacts are incorporated in theprice of power, the least-cost mix of electric power generation technologycould change in other ways. In all scenarios, energy efficiency andcogeneration play an important role in the least-cost power solution. Savingelectricity through increased efficiency offsets the needs for new supply andhas enormous potential in Brazil's industrial sector. Efficiency also reducesthe environmental burden associated with electricity production andtransmission, without compromising the quality of the services demandedby end users. Interesting enough, carbon dioxide (CO₂) emissions will remainrelatively low under almost every conceivable scenario.     

Environmental impact assessment of total chlorine free pulp from Eucalyptus globulus in Spain

Pulp industry plays an important role in the structure of European economy and society. Paper pulp manufacture, the industrial utilization of plant biomass, is increasing every year. In Spain, Eucalyptus is the dominant raw material and the Kraft cooking and total chlorine free (TCF) bleaching processes lead the procedures of Eucalyptus paper pulp production. This paper aims to identify and quantify the environmental impacts associated to Eucalyptus TCF pulp manufacture by using Life Cycle Assessment (LCA) as an analytical tool. The system has been defined using a cradle-to-gate perspective, that is to say from forest activities to the exit gate of the pulp mill. The production of chemicals consumed in the cooking and bleaching stages as well as the on-site energy production system is the elements that contribute the most to all impact categories analyzed (more than 50% of total contributions), except for the eutrophication potential where forest activities and waste treatment play an important roles (about 52% of total). Specific actions associated to the recovery boiler, lime kiln and digestion stage could considerably reduce the environmental impact and improve the environmental performance of the Spanish paper pulp industry.