Techno-economic assessment of waste sorting scenarios regional case study: Madaba sorting plant,Jordan

Journal of Material Cycles and Waste Management - Material Recovery Facilities (MRF) shall play a strategic role in developing countries to satisfy the sustainable development. The aim of this...     

Environmental impact assessment on the construction and operation of municipal solid waste sanitary landfills in developing countries: China case study

An inventory of material and energy consumption during the construction and operation (C&O) of a typical sanitary landfill site in China was calculated based on Chinese industrial standards for landfill management and design reports. The environmental impacts of landfill C&O were evaluated through life cycle assessment (LCA). The amounts of materials and energy used during this type of undertaking in China are comparable to those in developed countries, except that the consumption of concrete and asphalt is significantly higher in China. A comparison of the normalized impact potential between landfill C&O and the total landfilling technology implies that the contribution of C&O to overall landfill emissions is not negligible. The non-toxic impacts induced by C&O can be attributed mainly to the consumption of diesel used for daily operation, while the toxic impacts are primarily due to the use of mineral materials. To test the influences of different landfill C&O approaches on environmental impacts, six baseline alternatives were assessed through sensitivity analysis. If geomembranes and geonets were utilized to replace daily and intermediate soil covers and gravel drainage systems, respectively, the environmental burdens of C&O could be mitigated by between 2% and 27%. During the LCA of landfill C&O, the research scope or system boundary has to be declared when referring to material consumption values taken from the literature; for example, the misapplication of data could lead to an underestimation of diesel consumption by 60–80%.     

Healthcare waste management: a case study from the National Health Service in Cornwall, United Kingdom

This paper looks at steps taken towards the development of a 10-year strategy for the management of healthcare waste from the National Health Service (NHS) in Cornwall, United Kingdom. The major issues and challenges that affect the management of waste by the NHS, including its organisational structure and collection infrastructure, are outlined. The waste flows of the main acute medical site are detailed, using waste audits of domestic and clinical bags, redundant equipment, bulky waste, and special waste. Some of the common barriers to change, such as staff habits and public perceptions, are also identified. Recommendations are made with respect to improvements in the overall organisational infrastructure and increased localised control. The recommendations also centre around the formation of strategic partnerships, within the site, between sites and at the broader level between the NHS and its surrounding community. An important challenge to be overcome is the need to progress from the concept of "waste management", to one of sustainable decision making regarding resource use, including methods of waste minimisation at the source and recycling. Staff training and awareness underpin several of the short and medium/long term solutions suggested to reduce the waste at the source and recover value from that produced. These measures could potentially reduce disposal quantities by as much as 20-30% (wt.) and costs by around 25-35%.     

Environmental management of construction and demolition waste in Kuwait

There is an increasing pressure on the construction industry to reduce costs and improve the quality of our environment. The fact is that both of these goals can be achieved at the same time. Although construction and demolition (C&D) constitutes a major source of waste in terms of volume and weight, its management and recycling efforts have not yet seen the light in Kuwait. This study focuses on recycling efforts leading to the minimization of the total C&D waste that is currently landfilled in Kuwait. This paper presents the current status of C&D waste disposal system in Kuwait and identifies the potential problems to the environment, people and economy. Then, it investigates alternative solutions to manage and control this major type of waste in an economically efficient and environmentally safe manner. Next, the paper describes the feasibility of establishing a C&D waste recycling facility in Kuwait. It concludes by highlighting the major benefits and bottleneck problems with such a recycling facility.     

Energy recovery from municipal waste: a case study for a middle-sized Italian district

This paper reports the main outcome of research to compare and assess the merits of alternative strategies for energy recovery from municipal solid waste downstream of material recovery for an Italian province. Strategies analysed are based on well-established combustion technologies available at the commercial scale in the Italian market in comparison with an innovative but not yet proven option of refuse derived fuel gasification and subsequent co-combustion of syngas in a combined cycle power plant. The comparison is made using mass and energy balances, environmental assessment and economic analysis. From an energetic point of view, the best strategy is the one based on the refuse derived fuel gasification, which, on the contrary, does not show interesting environmental results. In this perspective, the best results are from strategies based on a dedicated plant, particularly when unsorted residual waste collected downstream of material recovery is used. Finally, from an economic point of view, the strategy with gasification allows the highest revenues from the sale of energy.     

Source separation of household waste: a case study in China

A pilot program concerning source separation of household waste was launched in Hangzhou, capital city of Zhejiang province, China. Detailed investigations on the composition and properties of household waste in the experimental communities revealed that high water content and high percentage of food waste are the main limiting factors in the recovery of recyclables, especially paper from household waste, and the main contributors to the high cost and low efficiency of waste disposal. On the basis of the investigation, a novel source separation method, according to which household waste was classified as food waste, dry waste and harmful waste, was proposed and performed in four selected communities. In addition, a corresponding household waste management system that involves all stakeholders, a recovery system and a mechanical dehydration system for food waste were constituted to promote source separation activity. Performances and the questionnaire survey results showed that the active support and investment of a real estate company and a community residential committee play important roles in enhancing public participation and awareness of the importance of waste source separation. In comparison with the conventional mixed collection and transportation system of household waste, the established source separation and management system is cost-effective. It could be extended to the entire city and used by other cities in China as a source of reference.     

Characterization of food waste generators: a Hawaii case study

Information on food waste disposal and on recycling methods and recycled amounts is reported. Data were obtained from a mail and phone survey of all licensed food establishments in Hawaii conducted in 2004 and 2005. Of 8253 licensed food establishments, 5033 completed surveys. It was found that relationships exist between food establishment size (measured by the number of meals served per day or the number of employees) and the amount of food an establishment recycled; establishment type and recycling behavior; and establishment type and amount recycled. The amount of food waste recycled in the state of Hawaii was estimated to be 264,000 L/day and annual food waste generation was estimated to be 336,000 tonnes.     

Health-care waste management in Lao PDR: a case study.

This study investigated the health-care waste (HCW) management at each health-care facility level at two selected sites in the Lao People's Democratic Republic (Lao PDR): Vientiane Municipality; and Bolikhamxay province. It focused on the amount of HCW, its segregation and the factors influencing HCW management, particularly segregation procedures. A high proportion of incorrectly segregated medical waste was found at each level of health-care facility. Re-segregation revealed 39, 62, 57 and 37% at national hospital, provincial hospital, district hospital and health centre level, respectively, was poorly segregated. The mean of generated HCW was 0.62 kg/bed per day (Vientiane Municipality) and 0.38 kg/bed per day (Bolikhamxay) at two study sites. A higher proportion of medical waste (MW) from the inpatient department at the primary health-care level was found. Thus, HCW management at primary health-care facilities needs more attention and should be better understood.     

Regional medical waste management in China: a case study of Shenyang

Medical waste management is of great importance due to its potential environmental and public health risks, especially in developing countries where both financial and technological resources on medical waste management are still lacking. Although many studies have focused on country-scaled medical waste management, few have paid close attention to regional (city-scale) management, particularly in China. This paper fills such a gap by employing a case study approach. Due to its representative nature, Shenyang was selected as the case study. After a review of China’s medical waste management, an empirical study in Shenyang was conducted in order to analyze the current state as well as identify key challenges on regional medical waste management. Based upon the local realities and aiming to better manage medical wastes, an integrated medical waste management framework is developed. Such a platform encourages the establishment of a specific medical waste management authority, a city scaled capacity building program on improving the general public’s awareness, an information platform, application of state-of-the-art technologies, as well as creation of an effective financial system. The combination of such initiatives can significantly improve the overall eco-efficiency of medical waste management at the regional level and should be promoted to other developing cities.     

Hospital waste management and toxicity evaluation: a case study

Hospital waste management is an imperative environmental and public safety issue, due to the waste's infectious and hazardous character. This paper examines the existing waste strategy of a typical hospital in Greece with a bed capacity of 400-600. The segregation, collection, packaging, storage, transportation and disposal of waste were monitored and the observed problematic areas documented. The concentrations of BOD, COD and heavy metals were measured in the wastewater the hospital generated. The wastewater's toxicity was also investigated. During the study, omissions and negligence were observed at every stage of the waste management system, particularly with regard to the treatment of infectious waste. Inappropriate collection and transportation procedures for infectious waste, which jeopardized the safety of staff and patients, were recorded. However, inappropriate segregation practices were the dominant problem, which led to increased quantities of generated infectious waste and hence higher costs for their disposal. Infectious waste production was estimated using two different methods: one by weighing the incinerated waste (880 kg day(-1)) and the other by estimating the number of waste bags produced each day (650 kg day(-1)). Furthermore, measurements of the EC(50) parameter in wastewater samples revealed an increased toxicity in all samples. In addition, hazardous organic compounds were detected in wastewater samples using a gas chromatograph/mass spectrograph. Proposals recommending the application of a comprehensive hospital waste management system are presented that will ensure that any potential risks hospital wastes pose to public health and to the environment are minimized.     

Formulating a VET roadmap for the waste and recycling sector: A case study from Queensland, Australia

Vocational Education and Training (VET) is an essential tool for providing waste management and recycling workers with the necessary skills and knowledge needed to beneficially influence their own employment and career development; and to also ensure productivity and safe working conditions within the organisations in which they are employed. Current training opportunities within Queensland for the sector are limited and not widely communicated or marketed; with other States, particularly Victoria and New South Wales, realising higher numbers of VET enrollments for waste management courses. This paper presents current VET opportunities and trends for the Queensland waste management sector. Results from a facilitated workshop to identify workforce requirements and future training needs organised by the Waste Contractors and Recyclers Association of Queensland (WCRAQ) are also presented and discussion follows on the future training needs of the industry within Queensland.     

Solid waste collection and recycling in Nibong Tebal, Penang, Malaysia: a case study.

The implementation of a suitable solid waste management programme with appropriate methods of recycling as an inherent element is vital to the alleviation of the problems associated with solid waste generation, handling and disposal, environmental conservation, public hygiene, etc. The present work is a case study on solid waste collection and recycling practices in Nibong Tebal town, Penang, Malaysia. The amount and types of domestic waste generated, household participation in recycling, identification of existing problems related to the implementation of the recycling programme, etc. formed the basis of this study. Surveys (interviews/questionnaires) and on-site observations were conducted to gather information on the solid waste collection and recycling practice of the residents. A focus group of 60 individuals was selected and their response to a questionnaire, prepared according to a Likert scale, was obtained and analysed. The majority of the respondents expressed concerns about recycling and wanted more to be done in this regard. Illegal collection, aesthetically displeasing sites and a lack of public awareness were problems of major concern. Issues related to inadequate funding and manpower as well as end market are also addressed and suggestions made.     

Characterization of a thermal power plant air heater washing waste: a case study from Iran.

In Iran most of the electricity is generated by thermal power plants. As a result of fuel oil burning in winter time, the air heaters of the boilers have to be washed and cleaned frequently. The wastewater originating from air heater washing is then treated in an effluent treatment plant by chemical precipitation followed by dewatering of the sludge produced. The resulting waste is classified as specific industrial waste that should be characterized in detail under the Waste Management Act of Iran. The quantity of this waste produced in the studied power plant is about 20 tonnes year(-1). In the present investigation, the first to be carried out in Iran, seven composite samples of dewatered sludge from air heater washing wastewater treatment were subjected to investigation of the physical properties, chemical composition and leaching properties. The most likely pollutants that were of concern in this study were heavy and other hazardous metals (Cd, Co, Cr, Mn, Ni, Pb, Zn and V). The results revealed that mean pH, wet and dry density and moisture content of the waste were 6.31, 1532 kg m(-30, 1879 kg m(-3) and 15.35%, respectively. Magnetite, SiO2, P2O5, CaO, Al2O3 and MgO were the main constituents of the waste with a weight percentage order of 68.88, 5.91, 3.39, 2.64, 2.59 and 1.76%, respectively. The toxicity characteristic leaching procedure test results for some heavy and other hazardous metals showed that mean elemental concentrations of Cd, Co, Cr, Mn, Ni, Pb, V and Zn in leachate were 0.06, 1.55, 5.49, 36.32, 209.10, 0.58, 314.06 and 24.84 mg L(-1), respectively. According to the Waste Management Act of Iran this waste should be classified as hazardous and should be disposed of in accordance with hazardous waste disposal regulations.     

Biomedical solid waste management in an Indian hospital: a case study

The objectives of this study were: (i) to assess the waste handling and treatment system of hospital bio-medical solid waste and its mandatory compliance with Regulatory Notifications for Bio-medical Waste (Management and Handling) Rules, 1998, under the Environment (Protection Act 1986), Ministry of Environment and Forestry, Govt. of India, at the chosen KLE Society's J. N. Hospital and Medical Research Center, Belgaum, India and (ii) to quantitatively estimate the amount of non-infectious and infectious waste generated in different wards/sections. During the study, it was observed that: (i) the personnel working under the occupier (who has control over the institution to take all steps to ensure biomedical waste is handled without any adverse effects to human health and the environment) were trained to take adequate precautionary measures in handling these bio-hazardous waste materials, (ii) the process of segregation, collection, transport, storage and final disposal of infectious waste was done in compliance with the Standard Procedures, (iii) the final disposal was by incineration in accordance to EPA Rules 1998, (iv) the non-infectious waste was collected separately in different containers and treated as general waste, and (v) on an average about 520 kg of non-infectious and 101 kg of infectious waste is generated per day (about 2.31 kg per day per bed, gross weight comprising both infectious and non-infectious waste). This hospital also extends its facility to the neighboring clinics and hospitals by treating their produced waste for incineration.     

Report: The assessment of hospital waste management:a case study in Tehran

Hospital waste management is an important process that must be dealt with diligently. The management of hazardous waste material requires specific knowledge and regulations and it must be carried out by specialists in the field. In this cross-sectional study, we assessed the main stages of hospital waste management including separation, containment, removal and disposal of waste materials in public hospitals affiliated with Tehran University of Medical Sciences (TUMS). We selected 108 units of six hospitals (three general hospitals and three subspecialty hospitals) from those hospitals supervised by TUMS using the cluster sampling method. The measurement was conducted through a questionnaire and direct observation by researchers. Association analysis was done by statistical tests; Fisher exact test and chi-squared using SPSS software. According to the results obtained by the questionnaire, most of the studied wards scored moderately in terms of quality of their performance in all stages of waste management. About one-fifth of the wards were suffering from poor management of their medical waste and only a minority of wards obtained good scores for managing their waste materials. The findings also revealed significant associations between temporary waste storage and collection and the level of education of the managers (P = 0.040, P = 0.050, respectively). In summary, the study indicated a moderate management in all processes of separation, collection, containment, removal and disposal of waste materials in hospitals with several observed problems in the process.     

Evaluating the effect of vehicle impoundment policy on illegal construction and demolition waste dumping: Israel as a case study

Construction and demolition (C&D) waste dumped alongside roads and in open areas is a major source of soil and underground water pollution. Since 2006, Israeli ministry for environmental protection enacted a policy of vehicle impoundment (VI) according to which track drivers caught while dumping C&D waste illegally have their vehicles impounded. The present study attempted to determine whether the VI policy was effective in increasing the waste hauling to authorized landfill sites, thus limiting the number of illegal unloads of C&D waste at unauthorized landfill sites and in open areas. During the study, changes in the ratio between the monthly amount of C&D waste brought to authorized landfills sites and the estimated total amount of C&D waste generated in different administrative districts of Israel were examined, before and after the enactment of the 2006 VI policy. Short questionnaires were also distributed among local track drivers in order to determine the degree of awareness about the policy in question and estimate its deterrence effects. According to the study’s results, in the district of Haifa, in which the VI policy was stringently enacted, the ratio between C&D waste, dumped in authorized landfill sites, and the total amount of generated C&D waste, increased, on the average, from 20% in January 2004 to 35% in October 2009, with the effect attributed to the number of vehicle impoundments being highly statistically significant (t = 2.324; p < 0.05). By contrast, in the Jerusalem and Southern districts, in which the VI policy was less stringently enforced, the effect of VI on the above ratio was found to be insignificant (p > 0.1). The analysis of the questionnaires, distributed among the local truck drivers further indicated that the changes observed in the district of Haifa are not coincident and appeared to be linked to the VI policy’s enactment. In particular, 62% of the truck drivers, participated in the survey, were aware of the policy and 47% of them personally knew a driver whose vehicle was impounded. Furthermore, the drivers estimated the relative risk of being caught for unloading C&D waste in unauthorized sites, on the average, as high as 67%, which is likely to become a deterrent on its own. Our conclusion is that the VI policy appears to have a deterring effect on truck drivers, by encouraging them to haul C&D waste to authorized landfill sites. As we suggest, the research methodology implemented in the study and its results may help policy makers in other regions and countries, which experience similar environment enforcement problem, to analyze policy responses.     

Evaluation of the waste heat discharged from the Di-ammonium Phosphate production plant: a case study

Journal of Material Cycles and Waste Management - This work presents an energy analysis of an industrial plant of production of Di-ammonium Phosphate (DAP plant). It aims to evaluate the important...     

Environmental assessment of alternative municipal solid waste management strategies. A Spanish case study

The aim of this study is to compare, from an environmental point of view, different alternatives for the management of municipal solid waste generated in the town of Castellón de la Plana (Spain). This town currently produces 207 ton of waste per day and the waste management system employed today involves the collection of paper/cardboard, glass and light packaging from materials banks and of rest waste at street-side containers.The proposed alternative scenarios were based on a combination of the following elements: selective collection targets to be accomplished by the year 2015 as specified in the Spanish National Waste Plan (assuming they are reached to an extent of 50% and 100%), different collection models implemented nationally, and diverse treatments of both the separated biodegradable fraction and the rest waste to be disposed of on landfills.This resulted in 24 scenarios, whose environmental behaviour was studied by applying the life cycle assessment methodology. In accordance with the ISO 14040-44 (2006) standard, an inventory model was developed for the following stages of the waste management life cycle: pre-collection (bags and containers), collection, transport, pre-treatment (waste separation) and treatment/disposal (recycling, composting, biogasification + composting, landfill with/without energy recovery). Environmental indicators were obtained for different impact categories, which made it possible to identify the key variables in the waste management system and the scenario that offers the best environmental behaviour. Finally, a sensitivity analysis was used to test some of the assumptions made in the initial life cycle inventory model.