凝聚器在提高电除尘效率上的试验研究

细微颗粒物的污染日益受到广泛关注,而常规静电除尘器对微细颗粒物的去除并不是很显著。采用双极荷电凝聚技术对静电除尘器加装凝聚器,并进行中试试验。结果表明,凝聚器凝聚效果明显,不仅有利于除尘效率的提高,更有利于减少细微颗粒物的排放,具有非常重要的工业应用价值。     

电除尘器及其电离荷电机制的研究新进展

详细介绍了电除尘技术研究现状、现存问题及其研究趋势.目前电除尘技术的理论尚不完备,属于经验工程的学科,电除尘器的技术性能优劣取决于设计命中率.为此,论述烟尘荷电凝聚机制并研究电离放电通道中的带电粒子复合问题及其输运特性等,以便解决除尘电场中的电离占空比、输运项甚低等问题;研究了烟尘荷电、凝聚的物理过程,以便进一步提高电除尘器的性能.     

用微孔填充理论研究活性炭对有机气体的吸附性能

用微孔填充理论研究了活性炭C40／4对丙酮、甲苯、二氯甲烷有机气体的吸附性能,测试了该活性炭对3种有机气体在不同温度下（288．15,293．15,298．15K）的吸附结果。用D—R方程处理了实验数据,建立了3种有机气体在活性炭C40／4上的等温吸附模型,并将实验测试值与理论预测值进行了比较。实验结果表明：微孔填充理论及D—R方程可很好地描述活性炭C40／4对有机气体的吸附性能,理论预测值与实验测试值的平均相对误差小于3％;有机气体分压较高时,由于发生毛细凝聚,理论预测值较实验测试值偏低。     

锅炉空预器堵灰的原因分析及处理措施

介绍了某电厂空预器的设计特点,该空预器运行过程中出现了一、二次风压与炉膛压力周期性波动、进出口差压偏大的问题.对该空预器实际运行情况的分析研究表明：燃用煤种含硫量超标、吹灰蒸汽带水、冬天暖风器投用不及时以及蓄热元件布置紧密是造成空预器堵灰的关键问题.通过控制入炉煤含硫量、加强吹灰、提高综合冷端温度和蓄热元件改造等措施,保证了空预器安全经济运行.     

电除尘器前端预荷电技术研究

电除尘器前端主要是指进口喇叭及进气烟道,在进口喇叭内设置预荷电电场,可以保证气流均匀进入电场的同时,对粉尘进行荷电、凝并,起到一级预收尘的作用,以增加收尘面积,提高除尘器的除尘效率。通过分析Indigo烟道凝聚器、进口喇叭内置电场技术、电除尘器中粉尘预荷电试验研究及国内专利技术成果基础上,提出电除尘器进口喇叭内预置电场技术,并取得比较好的应用效果。     

电除尘顶部振打控制系统表格图形化输入模式研究

研究了一种用于电除尘清灰控制系统的新型输入技术,即表格图形化输入技术,通过该方法可以简单、清晰地实现顶郝振打器的多模式、多参敷设置.在该模式下可以实现任意分组和分组查询.     

饮用水除氟技术及其机理

综述了近年来国内外饮用水除氟技术,如沉淀法、吸附法、离子交换法、电凝聚法、电渗析法、反渗透法等,同时讨论了各种除氟方法的机理及研究进展.     

BE型电收尘器的技术特点及其在永安电厂的应用

永安电厂3号收尘器（BE型）“比收尘面积”比4号收尘器小得多，但收尘效率更高，安全可靠性更好。以实况对照及理论分析证明了BE型电收尘器的独特优点。     

超细颗粒物凝聚中试试验均匀给料方案研究

给料的均匀性对PM2.5团聚试验至关重要,运用数值方法,采用LES模型计算湍流流场,采用DPM模型计算颗粒运动轨迹,分析PM2.5团聚中试试验台烟道内加设钝体后颗粒的均匀分布,得到了水平烟道各截面处颗粒浓度分布及数值的均方差曲线,发现在试验台圆方管处加设钝体,能有效改善烟道内煤灰颗粒的均匀分布。     

红霉素发酵液新型凝聚剂的研究

在红霉素发酵液的凝聚分离过程中,以亚铁盐代替锌盐作凝聚剂,在小试成果的基础上,完成了生产放大实验。通过两种凝聚剂对比的方式,进行了平均滤速、滤布着锈阻力、发酵液凝聚过程中 pH 和粘度变化等条件实验,同时考察了两种凝聚剂生产的红霉素质量和收率。试验结果表明,利用亚铁盐作凝聚剂,可以满足生产工艺要求,产品红霉素效价和收率达到指标,实现了消除污染和治理环境的目的。     

Floatability of polymer materials modulated by frothers

Flotation tests of 35 polymer materials were carried out to investigate their floatability modulated by frothers. Results of flotation tests demonstrated that polymer resins and soft PVC showed high floatability, floatability of hard PVC plastics was relatively low and was related to the frothers, and there exists significant difference in the floatability of different post-consumer plastics. Flotation rate of post-consumer plastics varies from 0% to 100%. Furthermore, three-category low-energy surface (LES) was defined based on the hydrophile index of the materials involved in this paper, and an adsorption model was proposed to explain the results of flotation and to discuss the floatability of polymer materials modulated by frothers. Frother molecules are prone to adsorb on the surface of bubble rather than LES at relatively low concentration, bubble adsorbed by frother molecules is prone to approach first-category LES rather than third-category LES, and the structure of liquid film is formed on the first-category LES at large concentration. Floatability of polymer materials modulated by frothers is further discussed: frothers increase the floatability of the first-category LES but decrease the floatability of the third-category LES, while the floatability of the second-category LES is related to the type of frothers.     

Vertical Mixing by Langmuir Circulations

Wind and surface wave frequently induce Langmuir circulations (LC) in the upper ocean, and the LC contribute to mixing materials down from the surface. In this paper we analyze large-eddy simulation (LES) cases based on surface-wave-averaged, dynamical equations and show that the effect of the LC is a great increase in the vertical mixing efficiency for both material properties and momentum. We provide new confirmation that the previously proposed K-profile parameterization (KPP) model accurately characterizes the turbulent transport in a weakly convective, wind-driven boundary layer with stable interior stratification. We also propose a modest generalization of KPP for the regime of weakly convective Langmuir turbulence. This makes the KPP turbulent flux profiles match those in the LES case with LC present fairly well, especially so for material properties being transported downwards from the ocean surface. However, some open issues remain about how well the present LES and KPP formulations represent Langmuir turbulence, in part because wave-breaking effects are not yet included.     

MEEP清灰钢刷失效分析与试验装置设计

移动电极电除尘器（MEEP）具有出口粉尘排放浓度低、可有效收集PM2.5等优点,其运动部件的可靠性越发受到国内外制造厂家的重视,清灰钢刷作为其关键部件之一,其国产化后的寿命和失效形式的研究越来越重要。分析了钢刷结构失效形式,并在综述了国外移动电极电除尘器钢碡4的研究经验的基础上,设计了钢刷失效形式和寿命测试试验装置。为提高钢刷寿命和降低移动电极电除尘器出口粉尘排放浓度提供了试验数据,推动了移动电极电除尘器关键的运动部件的研究进程,为移动电极电除尘器钢刷的改进和现有设备间距时间调整提供参考。     

Composting in small laboratory pilots: performance and reproducibility

Small-scale reactors (<10 l) have been employed in composting research, but few attempts have assessed the performance of composting considering the transformations of organic matter. Moreover, composting at small scales is often performed by imposing a fixed temperature, thus creating artificial conditions, and the reproducibility of composting has rarely been reported. The objectives of this study are to design an innovative small-scale composting device safeguarding self-heating to drive the composting process and to assess the performance and reproducibility of composting in small-scale pilots. The experimental setup included six 4-l reactors used for composting a mixture of sewage sludge and green wastes. The performance of the process was assessed by monitoring the temperature, O₂ consumption and CO₂ emissions, and characterising the biochemical evolution of organic matter. A good reproducibility was found for the six replicates with coefficients of variation for all parameters generally lower than 19%. An intense self-heating ensured the existence of a spontaneous thermophilic phase in all reactors. The average loss of total organic matter (TOM) was 46% of the initial content. Compared to the initial mixture, the hot water soluble fraction decreased by 62%, the hemicellulose-like fraction by 68%, the cellulose-like fraction by 50% and the lignin-like fractions by 12% in the final compost. The TOM losses, compost stabilisation and evolution of the biochemical fractions were similar to observed in large reactors or on-site experiments, excluding the lignin degradation, which was less important than in full-scale systems. The reproducibility of the process and the quality of the final compost make it possible to propose the use of this experimental device for research requiring a mass reduction of the initial composted waste mixtures.     

An evaluation of the performance of multiple passive diffusion devices for indoor air sampling of VOCs

The United States Environmental Protection Agency is considering recommending longer‐term sampling to achieve more accurate time‐weighted‐average detections for indoor air monitoring of volatile organic chemicals. The purpose of the research presented herein was to compare longer sampling times using passive diffusion samplers to the results from shorter‐term testing periods using sorbent tubes and low‐flow pumps (US EPA Method TO‐17) at great frequency for trichloroethene (TCE) in indoor air. A controlled release of TCE in a large room allowed for over two‐orders‐of‐magnitude daily concentration variability over the course of the two‐week monitoring event. The daily concentration measurements by US EPA Method TO‐17 and the passive diffusion samplers were performed in triplicate and had excellent reproducibility. The results of daily tests were averaged and compared with four passive diffusion devices exposed to indoor air for three, seven, ten, and fourteen days in accordance with ASTM D6196‐02. A specific uptake rate for each of the passive devices at the four different time intervals and the statistical significance of the time‐varying uptake rates were evaluated. The performance of each passive diffusion device was determined using a statistical performance criterion. The average concentration for all of the exposure periods could be reliably predicted using the established uptake rates for two of the four passive devices. © 2009 Wiley Periodicals, Inc.     

A new approach to estimation of methane emission rates from landfills

Methane emission monitoring has become increasingly essential for diffusive area sources, especially for landfills, which contribute to a significant fraction of the total anthropogenic methane emission globally. Statutorily, methane emission rate from landfills in Germany shall be examined on a semiannual basis; however, an appropriate approach has yet to be developed and adopted for general use. In this study, a new method is proposed based on experimental results, which utilizes a TDLAS (Tunable Diode Laser Absorption Spectroscopy) instrument – GasFinder2.0® system and a dispersion model LASAT (Lagrangian Simulation of Aerosol Transport) as the measurement device and calculation model, respectively. Between April 2010 and December 2011, a research project was conducted at a pilot scale landfill in the south of Germany. Drawing on the extensive research into this pilot project, an effective strategy of measurement setup was determined. Methane concentration was measured with GasFinder2.0® system in the upstream and downstream sections of the project site, while wind and turbulence data were measured simultaneously by an ultrasonic anemometer. The average methane emission rate from the source can be calculated by using the results as input data in the dispersion model. With this method, site-specific measurement approaches can be designed for not only landfills, but also different diffusive area sources with less workload and lower cost compared to conventional FID (Flame Ionization Detector) method.     

New technology and application of brick making with coal fly ash

China has ranked first in the coal fly ash emission in the world. The multipurpose use of the fly ash from power plant waste is always an important topic for the Chinese environmental protection, which has drawn the concern of the government, scientific research departments, manufacturing enterprises and industry experts. This paper introduces an experimental research on how to recycle fly ash effectively, a kind of new technology of making bricks by which fly ash content could be amounted to 50–80 %. The article introduces raw materials of fly ash brick, production process and key control points. It introduces how to change the technical parameters of the existing brick-making mechanical device, optimize the parameters combination and improve the device performance. High-content fly ash bricks are manufactured, which selects wet fly ash from power plants, adding aggregate with reasonable ratio and additives with reasonable dosage, and do the experimental research on manufactured products for properties, production technology and selection about technology parameters of production equipment. All indexes of strength grade, freezing-thawing resisting, and other standards of the studied bricks reached the national standards for building materials industry.     

EDI装置工业应用问题及应对措施

根据河南某电厂电去离子（EDI）装置在调试、运行中发生了断水烧坏模块、树脂包被有机物污染和余氯氧化导致树脂破碎等诸多问题,通过对EDI模块的抽检和整套工艺的系统性分析,找出了产生问题的原因,采取了增加多重流量保护、清洗系统隔离及余氯检测等措施,对EDI树脂包进行了更换和修复,恢复了EDI装置的离子交换性能。通过一年多的运行观察,该套装置运行稳定,产水水质优良。     

多炉一塔湿法脱硫系统石膏脱水环节探讨

通过对脱硫吸收塔内五个区浆液的综合分析,讨论了石膏脱水系统环节的设计,结合天津第一热电厂脱硫工程,分析了各脱水设备在不同工艺流程中的选择条件,提出了一种湿法脱硫过程中浆液分配器的改进设计。