Perfluorocarboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFASs) in surface and tap water around Lake Taihu in China

Perfluorinated compounds (PFCs) are ubiquitously distributed in the environment mainly as perfluoro-carboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFASs). In this paper, six PFCAs and two PFASs were quantified in surface and tap water samples from 12 sites around Lake Taihu near Shanghai City in East China. Predominant PFCs were perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), of which the concentration ranges were 6.8–206 and 1.2–45 ng·L⁻¹, the geometric means were 35.3 and 9.4 ng·L⁻¹, and the median (quartile range) values were 31.4 (34.4) and 10.4 (10.7) ng·L⁻¹, respectively. Other PFCs were also detected but in much lower concentrations than PFOA. The sources of the PFCs were expected to be direct industrial discharges in the Lake Taihu area, and this area was also a possible source of PFCs contaminations in Shanghai district in the downstream. PFCs distributions were found different in the upstream, downstream and north part of Lake Taihu. Occurrences of PFCs in the tap water in Lake Taihu area indicated their exposure to the local people. A brief estimation of the environmental risks by PFCs implied no acute or immediate risks from PFCs to local human health, but chronic risks from PFOA in the tap water should be considered in the downstream regions.     

Vanadium and molybdenum concentrations in particulate from Palermo (Italy): analytical methods using voltammetry

The main purpose of this work was to develop a reliable method for the determination of vanadium (V) and molybdenum (Mo) in atmosphere particles or aerosols because they can not be readily measured using conventional techniques. For this research, 30 particulate samples were collected from five different stations located at Palermo, Italy. We used the catalytic adsorptive stripping voltammetry and differential pulsed voltammetry to measure V and Mo in atmospheric particulate, respectively. The represented method includes advantages of high sensitivity, high selectivity, simplicity, reproducibility, speed and low costs. The quantification limits for V and Mo are, respectively, 0.57 and 0.80 ng·m⁻³. The precision, expressed as relative standard deviation (RSD %), was about 2% for both metals. The mean recoveries of added V and Mo were about 99.5% and ranged from 97% to 101%. Vanadium concentrations in particulate samples collected in Palermo area ranged from 0.57 to 7.7 ng·m⁻³, while Mo concentrations were in the range 0.8–51 ng·m⁻³. In many cases the concentrations of two elements in the particulate samples fall below the detection limits. The mean concentrations for V and Mo in particulate samples, collected in Palermo area, were respectively 3.1 and 5.9 ng·m⁻³.     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Occurrence of estrogenic endocrine disrupting chemicals concern in sewage plant effluent

The purpose of this study was to give a worldwide overview of the concentrations of typical estrogenic endocrine disrupting chemicals （EDCs） in the effluent of sewage plants and then compare the concentra- tion distribution of the estrogenic EDCs in ten countries based on the survey data of the estrogenic EDCs research. The concentrations of three main categories （totally eight kinds） of estrogenic EDCs including steroidal estrogens （estrone （El）, estradiol （E2）, estriol （E3） and 17a- ethynylestradiol （EE2））, phenolic compounds （nonylphe- nol （NP） and bisphenol A （BPA）） and phthalate esters （dibutyl phthalate （DBP） and dibutyl phthalate （2- ethylhexyl） phthalate （DEHP）） in the effluents of sewage plants reported in major international journals over the past decade were collected. The statistics showed that the concentration distributions of eight kinds of EDCs were in the range of ng·L^-1 to μg·L^-1. The concentrations of steroidal estrogens mainly ranged within 50.00 ng. L-1, and the median concentrations of El, E2, E3 and EE2 were 11.00, 3.68, 4.90 and 1.00 ng·L^-1, respectively. Phenolic compounds and phthalate esters were found at pg. L-1 level （some individual values were at the high level of 40.00 μg·L^-1）. The median concentrations of BPA, NP, DBP and DEHP were 0.06, 0.55, 0.07 and 0.88 μg·L^-1, respectively. The concentrations of phenolic compounds and phthalate esters in the effluents were higher than that of steroids estrogens. The analysis of the concentration in various ten countries showed that steroids estrogens, phenolic compounds and phthalate esters in sewage plant effluents were detected with high concentration in Canada, Spain and China, respectively.     

高效液相色谱-串联质谱法同时检测水体中26种药物及个人护理品

通过优化固相萃取条件和高效液相色谱-串联质谱参数,建立了可以同时检测地表水和地下水中26种典型药物及个人护理品(pharmaceuticals and personal care products,PPCPs),包括磺胺类、大环内酯类、喹诺酮类、酰胺醇类、精神类、消炎止痛类以及个人护理品的检测方法.通过将水样pH值调节...     

Perfluorinated compounds in water and sediment from coastal regions of the northern Bohai Sea,China

Concentrations of perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and other perfluorinated compounds (PFCs) were measured in water and sediment from coastal Bohai Bay and surrounding rivers flowing into the bay. Of the 15 PFCs measured, PFOS and PFOA were detected with the greatest frequency. Concentrations in water ranged from<0.2 to 31 ng·L^?1 and<1.0 to 82 ng·L^?1 for PFOS and PFOA, respectively. Concentrations of PFOS and PFOA in sediments ranged from<0.1 to 2.0 ng·g^?1 dw and<0.1 to 0.5 ng·g^?1 dw, respectively. Concentrations of PFCs in Bohai Bay were less than those observed in other areas in Asia, but greater concentrations of ∑PFCs were observed in the Dalin River with concentrations increasing from upstream to downstream, and the greatest concentrations in sediment were observed in tidal flats. The ratio of ∑PFCs in sediment and water indicated that sediment could serve as a significant sink for PFUnA.     

Electro-conductive crosslinked polyaniline/carbon nanotube nanofiltration membrane for electro-enhanced removal of bisphenol A

● A crosslinked polyaniline/carbon nanotube NF membrane was fabricated. ● Electro-assistance enhanced the removal rate of the NF membrane for bisphenol A. ● Intermittent voltage-assistance can achieve nearly 100% removal of bisphenol A. ● Membrane adsorption–electro-oxidation process is feasible for micropollutant removal. Nanofiltration (NF) has attracted increasing attention for wastewater treatment and potable water purification. However, the high-efficiency removal of micropollutants by NF membranes is a critical challenge. Owing to the adsorption and subsequent diffusion, some weakly charged or uncharged micropollutants, such as bisphenol A (BPA), can pass through NF membranes, resulting in low removal rates. Herein, an effective strategy is proposed to enhance the BPA removal efficiency of a crosslinked polyaniline/carbon nanotube NF membrane by coupling the membrane with electro-assistance. The membrane exhibited a 31.9% removal rate for 5 mg/L BPA with a permeance of 6.8 L/(m²·h·bar), while the removal rate was significantly improved to 98.1% after applying a voltage of 2.0 V to the membrane. Furthermore, when BPA coexisted with humic acid, the membrane maintained 94% removal of total organic carbon and nearly 100% removal of BPA at 2.0 V over the entire filtration period. Compared to continuous voltage applied to the membrane, an intermittent voltage (2.0 V for 0.5 h with an interval of 3.5 h) could achieve comparable BPA removal efficiency, because of the combined effect of membrane adsorption and subsequent electrochemical oxidation. Density functional theory calculations and BPA oxidation process analyses suggested that BPA was adsorbed by two main interactions: π–π and hydrogen-bond interactions. The adsorbed BPA was further electro-degraded into small organic acids or mineralized to CO₂ and H₂O. This work demonstrates that NF membranes coupled with electro-assistance are feasible for improving the removal of weakly charged or uncharged micropollutants.     

Oxidation and biotoxicity assessment of microcystin-LR using different AOPs based on UV,O3 and H2O2

MC-LR removal performances under different AOPs were compared systematically. Higher removal efficiency and synergistic effects were obtained by combined process. The acute biotoxicity raised in different degrees after oxidation. Microcystin-LR attracts attention due to its high toxicity, high concentration and high frequency. The removal characteristics of UV/H₂O₂ and O₃/H₂O₂ advanced oxidation processes and their individual process for MC-LR were investigated and compared in this study. Both the removal efficiencies and rates of MC-LR as well as the biotoxicity of degradation products was analyzed. Results showed that the UV/H₂O₂ process and O₃/H₂O₂ were effective methods to remove MC-LR from water, and they two performed better than UV-, O₃-, H₂O₂-alone processes under the same conditions. The effects of UV intensity, H₂O₂ concentration and O₃ concentration on the removal performance were explored. The synergistic effects between UV and H₂O₂, O₃ and H₂O₂ were observed. UV dosage of 1800 mJ·cm⁻² was required to remove 90% of 100 mg·L⁻¹ MC-LR, which amount significantly decreased to 500 mJ·cm⁻² when 1.7 mg·L⁻¹ H₂O₂ was added. 0.25 mg·L⁻¹ O₃, or 0.125 mg·L⁻¹ O₃ with 1.7 mg·L⁻¹ H₂O₂ was needed to reach 90% removal efficiency. Furthermore, the biotoxicity results about these UV/H₂O₂, O₃/H₂O₂ and O₃-alone processes all present rising trends with oxidation degree of MC-LR. Biotoxicity of solution, equivalent to 0.01 mg·L⁻¹ Zn²⁺, raised to 0.05 mg·L⁻¹ Zn²⁺ after UV/H₂O₂ or O₃/H₂O₂ reaction. This phenomenon may be attributed to the aldehydes and ketones with small molecular weight generated during reaction. Advice about the selection of MC-LR removal methods in real cases was provided.     

The temporal changes of the concentration level of typical toxic organics in the river sediments around Beijing

In this study, the current situation of five types of toxic organics and endocrine disrupters in the sediments of rivers around Beijing, i.e., polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), organic chlorinated pesticides (OCPs), estrogens (Es), and bisphenol A (BPA), which included 56 contaminants, was analyzed and compared with that registered by the historical literatures. The ecological risks were also assessed. The total concentration of PAHs, PAEs, OCPs, Es, and BPA ranged from 232.5 ng·g^–1 to 5429.7 ng·g^–1, 2047.2 ng·g^–1 to 18051.5 ng·g^–1, 4.5 ng·g^–1 to 11.7 ng·g^–1, 18.1 ng·g^–1 to 105.2 ng·g^–1, and 36.3 ng·g^–1 to 69.6 ng·g^–1, respectively. Among these five types of organic compounds, the concentration levels of PAHs and OCPs have decreased significantly in the last ten years, while those of PAEs and Es had an upward trend compared with the previous studies. BPA still remained at a moderately high level, as it was ten years ago. The risks of the PAEs in all of the sample sites, and fluoranthene, benzo[a]anthrene, and benzo[a]pyrene in the Wenyu River sediment, were relatively high. These results supplemented the database of toxic organics’ concentration levels in the sediments of Beijing rivers.

Open image in new window

     

Removal of clofibric acid from aqueous solution by polyethylenimine-modified chitosan beads

Polyethylenimine （PEI）-modified chitosan was prepared and used to remove clofibric acid （CA） from aqueous solution. PEI was chemically grafted on the porous chitosan through a crosslinking reaction, and the effects of PEI concentration and reaction time in the preparation on the adsorption of clofibric acid were optimized. Scanning electron microscopy （SEM） showed that PEI macromolecules were uniformly grafted on the porous chitosan, and the analysis of pore size distribution indicated that more mesopores were formed due to the crosslinking of PEI molecules in the macropores of chitosan. The PEI-modified chitosan had fast adsorption for CA within the initial 5 h, while this adsorbent exhibited an adsorption capacity of 349 mg· g^-1 for CA at pH 5.0 according to the Langmuir fitting, higher than 213 mg· g^-1 on the porous chitosan. The CA adsorption on the PEI- modified chitosan was pH-dependent, and the maximum adsorption was achieved at pH 4.0. Based on the surface charge analysis and comparison of different pharmaceu- ticals adsorption, electrostatic interaction dominated the sorption of CA on the PEI-modified chitosan. The PEI- modified chitosan has a potential application for the removal of some anionic rnicropollutants from water or wastewater.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

Engineering application of membrane bioreactor for wastewater treatment in China: Current state and future prospect

China has been the forerunner of large-scale membrane bioreactor （MBR） application. Since the first large-scale MBR （≥ 10 000 m^3·d^-1） was put into operation in 2006, the engineering implementation of MBR in China has attained tremendous development. This paper outlines the commercial application of MBR since 2006 and provides a variety of engineering statistical data, covering the fields of municipal wastewater, industrial wastewater, and polluted surface water treatment. The total treatment capacity of MBRs reached 1× 10^6 m^3·d^-1 in 2010, and has currently exceeded 4.5 × 10^6 m^3·d^-1 with -75% of which pertaining to municipal wastewater treatment. The anaerobic/anoxic/aerobie-MBR and its derivative processes have been the most popular in the large-scale municipal application, with the process features and typical ranges of parameters also presented in this paper. For the treatment of various types of industrial wastewater, the configurations of the MBR-based processes are delineated with representative engineering cases. In view of the significance of the cost issue, statistics of capital and operating costs are also provided, including cost structure and energy composition. With continuous stimulation from the environmental stress, political propulsion, and market demand in China, the total treatment capacity is expected to reach 7.5 × 10^6 m^3·d^-1 by 2015 and a further expansion of the market is foreseeable in the next five years. However, MBR application is facing several challenges, such as the relatively high energy consumption. Judging MBR features and seeking suitable application areas should be of importance for the long-term development of this technology.     

双酚A对小鼠肝脏和肾脏细胞的氧化损伤

为探究双酚A(BPA)的氧化毒性,分别以剂量为20、40和80mg·kg~(-1)·d~(-1)的BPA对雄性昆明小鼠灌胃处理1周,并测定了小鼠体内活性氧自由基(ROS)水平、还原型谷胱甘肽(GSH)含量、丙二醛(MDA)含量和DNA-蛋白质交联系数(DPC)。与对照组相比,各BPA暴露组小鼠肝脏和肾脏细胞中的ROS生成量、MDA含量和DPC系数均升高,而GSH含量下降(P<0.05或P<0.01)。ROS生成量、GSH含量和DPC系数均显示出剂量-效应关系。研究表明,BPA可扰乱小鼠肝脏和肾脏细胞的氧化应激平衡,诱导细胞氧化损伤。     

药品与个人护理品在鱼体中的累积及代谢研究进展

药品与个人护理品(pharmaceuticals and personal care products,PPCPs)作为一类广泛使用和具有特殊物理化学特性的新型环境污染物,能够在水环境中持续低浓度的存在,对水生生态系统具有潜在风险,已经引起了广泛的关注。鱼体内PPCPs的累积与代谢过程研究在PPCPs的生态风险评价中占据极其重要的地位。概述了PPCPs在鱼体内的分布,分析了影响PPCPs在鱼体内累积的因素如PPCPs的性质、组织差异、鱼的种类、不同的描述方法等,讨论了PPCPs的代谢机制,重点介绍了PPCPs在胆汁内的解毒机制和代谢产物,强调了胆汁应用的重要意义。最后,展望了PPCPs在鱼体内的累积和代谢这一研究领域的发展方向。     

Bisphenol A removal from synthetic municipal wastewater by a bioreactor coupled with either a forward osmotic membrane or a microfiltration membrane unit

Forward osmotic membrane bioreactor is an emerging technology that combines the advantages of forward osmosis and conventional membrane bioreactor. In this paper, bisphenol A removal by using a forward osmotic membrane bioreactor and a conventional membrane bioreactor that shared one biologic reactor was studied. The total removal rate of bisphenol A by the conventional membrane bioreactor and forward osmotic membrane bioreactor was as high as 93.9% and 98%, respectively. Biodegradation plays a dominant role in the total removal of bisphenol A in both processes. In comparison of membrane rejection, the forward osmosis membrane can remove approximately 70% bisphenol A from the feed, much higher than that of the microfiltration membrane (below 10%). Forward osmosis membrane bioreactor should be operated with its BPA loading rate under 0.08 mg·g^-1·d^-1 to guarantee the effluent bisphenol A concentration less than10 μg·L^-1.     

Fe2O3-CeO2-Bi2O3/γ-Al2O3 catalyst in the catalytic wet air oxidation (CWAO) of cationic red GTL under mild reaction conditions

Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃, an environmental friendly material, was investigated. The catalyst exhibited good catalytic performance in the CWAO of cationic red GTL. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. HO₂· and O₂·⁻ appeared as the main reactive species in the reaction. The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst, a novel environmental-friendly material, was used to investigate the catalytic wet air oxidation (CWAO) of cationic red GTL under mild operating conditions in a batch reactor. The catalyst was prepared by wet impregnation, and characterized by special surface area (BET measurement), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst exhibited good catalytic activity and stability in the CWAO under atmosphere pressure. The effect of the reaction conditions (catalyst loading, degradation temperature, solution concentration and initial solution pH value) was studied. The result showed that the decolorization efficiency of cationic red GTL was improved with increasing the initial solution pH value and the degradation temperature. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. Hydroperoxy radicals (HO₂·) and superoxide radicals (O₂⁻·) appeared as the main reactive species upon the CWAO of cationic red GTL.     

Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.     

Degradation of bisphenol A by microorganisms immobilized on polyvinyl alcohol microspheres

In this study, microorganisms （named B111） were immobilized on polyvinyl alcohol microspheres prepared by the inverse suspension crosslinked method. The biodegradation of bisphenol A （BPA） and 4-hydro- xybenzaldehyde, a degradation product of BPA, by free and immobilized B lll was investigated. The BPA degradation studies were carried out at initial BPA concentrations ranging from 25 to 150 mg·L^-1. The affinity constant Ks and maximum degradation rate Rmax were 98.3 mg·L^-1 and 19.7mg·mg^-1VSS·d^-1 for free B111, as well as 87.2mg·L^-1 and 21.1mg·mg^-1VSS·d^-1 for immobilized B 111, respectively. 16S rDNA gene sequence analyses confirmed that the dominant genera were Pseudomonas and Brevundimonas for BPA biodegradation in microorganisms B 111.     

Removal of ammonium and nitrate through Anammox and FeS-driven autotrophic denitrification

● Simultaneous NH₄⁺/NO₃^– removal was achieved in the FeS denitrification system ● Anammox coupled FeS denitrification was responsible for NH₄⁺/NO₃^– removal ● Sulfammox, Feammox and Anammox occurred for NH₄⁺ removal ● Thiobacillus, Nitrospira , and Ca. Kuenenia were key functional microorganisms An autotrophic denitrifying bioreactor with iron sulfide (FeS) as the electron donor was operated to remove ammonium (NH₄⁺) and nitrate (NO₃⁻) synergistically from wastewater for more than 298 d. The concentration of FeS greatly affected the removal of NH₄⁺/NO₃⁻. Additionally, a low hydraulic retention time worsened the removal efficiency of NH₄⁺/NO₃⁻. When the hydraulic retention time was 12 h, the optimal removal was achieved with NH₄⁺ and NO₃⁻ removal percentages both above 88%, and the corresponding nitrogen removal loading rates of NH₄⁺ and NO₃⁻ were 49.1 and 44.0 mg/(L·d), respectively. The removal of NH₄⁺ mainly occurred in the bottom section of the bioreactor through sulfate/ferric reducing anaerobic ammonium oxidation (Sulfammox/Feammox), nitrification, and anaerobic ammonium oxidation (Anammox) by functional microbes such as Nitrospira, Nitrosomonas, and Candidatus Kuenenia. Meanwhile, NO₃⁻ was mainly removed in the middle and upper sections of the bioreactor through autotrophic denitrification by Ferritrophicum, Thiobacillus, Rhodanobacter, and Pseudomonas, which possessed complete denitrification-related genes with high relative abundances.     

Sorption and desorption of pymetrozine on six Chinese soils

Pymetrozine is a selective insecticide with a unique chemical structure and mode to control hemipteran and homopteran. While pymetrozine has brought great benefits to crop production by killing insects, its residues in soil may have a detrimental effect on environment. Therefore, it is of great importance to investigate its behaviors in soil. In this study, the sorption and desorption of pymetrozine on six Chinese soils were investigated using a batch equilibrium approach to understand its mobile behavior in the soils. Both sorption and desorption isotherms of pymetrozine were in good agreement with the Freundlich model. The sorption coefficient K_F varied between 3.37 and 58.32 mL∙g⁻¹ and the sorption isotherms were nonlinear, with 1/n ranging from 0.57 to 0.91. A regression equation was proposed to predict the sorption of pymetrozine on six different soil samples: log K_F = 4.3708 − 4.5709 × log (pH in 0.01mol·L⁻¹ CaCl₂) + 0.4700 × log OC% + 0.0057 × sand (%) + 0.0022 × CEC(clay), with R² = 0.9982. The organic carbon content of soil positively affected the sorption of pymetrozine, but soil pH had a negative effect on the sorption. Additionally, effects of CaCl₂ concentration, soil to solution ratio and pesticide form were investigated. The sorption was promoted with an increase in soil to solution ratio and a decrease in CaCl₂ concentration. The possible variation of the five formulated products of pymetrozine was also investigated.