Seasonal variation in microbial communities and organic malodor indicator compound concentrations in various types of swine manure storage systems

Anaerobic manure storage systems are one of the major contributors to the odor and environmental pollution associated with swine (Sus scrofa) production systems. The microbial ecology of manure storage systems and the relationships between microbial communities and odor production are largely unknown. In this study, we used community fatty acid methyl ester (FAME) analysis to generate lipid profiles to assess seasonal differences among microbial communities inhabiting various types of outdoor swine manure storage systems. Concurrently, we measured manure concentrations of several malodor indicator compounds as well as pH, temperature, and solids content. Principal components analysis (PCA) showed that there are differences in FAME profiles among the swine manure storage systems examined and most of the variation was in the relative abundance of 18:0, 18:1omega7t, 18:1omega7c/omega9t/omega12t, and 16:1omega7t/i15:0 2OH FAMEs. The PCA of the FAME profiles revealed that the phototrophic systems were more similar to each other and that the nonphototrophic systems were more similar to each other than they were to phototrophic lagoons. There were seasonal changes in the FAME profiles in the phototrophic systems and the concrete nonphototrophic basin (CNPB), and in one phototrophic system, the FAME profiles more closely resembled a CNPB FAME profile during the winter than the other phototrophic lagoons. In the phototrophic lagoon systems, there was a direct correlation between the abundance of the FAMEs identified in the PCA and manure concentrations of phenol, p-cresol, and 4-ethyl phenol. In the CNPB, there was a negative correlation between the total phenolics concentration and the 18:1omega7t FAME. Our results indicate that community FAME profiles could be used as a diagnostic tool for obtaining preliminary evidence that management practices are altering the system's microbial community to one that favors less air pollution potential.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Are methylmercury concentrations in the wetlands of Kejimkujik National Park, Nova Scotia, Canada, dependent on geology?

In the relatively pristine ecosystem in Kejimkujik Park, Nova Scotia, methylmercury (MeHg) concentrations in loons, Gavia immer, are among the highest recorded anywhere in the world. This study investigated the influence of bedrock lithology on MeHg concentrations in wetlands. Twenty-five different wetland field sites were sampled over four different bedrock lithologies; Kejimkujik monzogranite, black sulfidic slate, gray slate, and greywacke. Soil samples were analyzed for ethylmercury (EtHg), MeHg, total Hg, acid-volatile sulfides (AVS), organic matter, and water content as well as the biological parameters, mercury methyltransferase (HgMT) activity, sulfate reduction rates, fatty acid methyl ester (FAME) composition, and acidity. Methylmercury concentrations in the wetlands were highly dependent (P < 0.08) on lithology with no significant difference between bogs, fens, and swamps. Methylmercury concentrations in wetland soils developed on Kejimkujik monzogranite averaged 900 ng kg(-1) compared with only 300 ng kg(-1) in wetland soils developed on black sulfidic slate. Fatty acid methyl ester composition was also lithologically dependent (P < 0.001) with biomarkers for Desulfobulbus spp. discriminating between sites containing high and low MeHg concentrations. Levels of MeHg in wetlands were predicted mainly (41% of the sum of squares) by HgMT activity that differed (P < 0.009) between wetlands, with activity in bogs almost three times that present in swamps. Wetland MeHg concentrations are highly dependent on the lithology on which they have developed for largely biological reasons.     

Remediation of biodiesel wastewater by chemical- and electro-coagulation: a comparative study

The remediation of biodiesel wastewater was carried out using chemical and electrochemical techniques. Initially the fatty acid methyl esters (FAME or biodiesel) and free fatty acids (FFA) were chemically removed from the wastewater using three types of mineral acids, H(2)SO(4), HNO(3) and HCl, at different pH values within the range of 1.0-8.0. Optimally, approximately 24.3 ml/l of FAME/FFA were removed from the wastewater when using H(2)SO(4) to set a final pH of 2.5 for 7 min. All pollutant levels were markedly reduced during this step. That is, approximately 38.94%, 76.32% and 99.36% of COD, BOD5 and oil & grease were respectively removed. The acidic aqueous phase left after the removal of the FAME/FFA phase was then treated by chemical- and electro-coagulation processes. The results demonstrated that both investigated treatment processes were effective for treating wastewater from a biodiesel production plant. The chemical coagulation provided a lower operating cost (1.11 USD/m(3)) compared with the electro-coagulation process (1.78 USD/m(3)). However, the latter process provided a better quality of wastewater compared with the former process, with the exception of the BOD levels.     

Prospect of castor oil biodiesel in Bangladesh: Process development and optimization study

In this study, castor oil (CO) has been investigated as a potential source for biodiesel production in Bangladesh. Castor oil has been extracted from the seeds by mechanical press and the Soxhlet extraction method. Maximum oil content of 55.7% has been found by the Soxhlet extraction method. The physicochemical properties such as free fatty acid (FFA) content, kinematic viscosity, saponification value, and density of the oil have been measured by different standard methods. The FFA content and viscosity have been found considerably higher such as 33.5% and 253 mm²/s, respectively. Biodiesel has been prepared using a three-step method comprising of saponification of oil followed by acidification of the soap and esterification of FFA. The overall yield of FFA from CO is found to be around 89.2%. The final step is esterification that produces fatty acid methyl ester (FAME) and a maximum 97.4% conversion of FFA to biodiesel has been observed. The effect of the oil to methanol molar ratio, catalyst concentration, reaction temperature, and time has been investigated for esterification reaction and optimized using the response surface methodology. ¹H NMR of crude castor oil and castor oil methyl ester (COME) was studied and analyzed that confirms the complete conversion of castor oil to biodiesel. Finally, the biodiesel, produced under optimum conditions, was characterized using the various standard method and found comparable with petro-diesel and biodiesel standard.     

Assessment of contamination from arsenical pesticide use on orchards in the Great Valley region, Virginia and West Virginia, USA

Lead arsenate pesticides were widely used in apple orchards from 1925 to 1955. Soils from historic orchards in four counties in Virginia and West Virginia contained elevated concentrations of As and Pb, consistent with an arsenical pesticide source. Arsenic concentrations in approximately 50% of the orchard site soils and approximately 1% of reference site soils exceed the USEPA Preliminary Remediation Goal (PRG) screening guideline of 22 mg kg(-1) for As in residential soil, defined on the basis of combined chronic exposure risk. Approximately 5% of orchard site soils exceed the USEPA PRG for Pb of 400 mg kg(-1) in residential soil; no reference site soils sampled exceed this value. A variety of statistical methods were used to characterize the occurrence, distribution, and dispersion of arsenical pesticide residues in soils, stream sediments, and ground waters relative to landscape features and likely background conditions. Concentrations of Zn, Pb, and Cu were most strongly associated with high developed land density and population density, whereas elevated concentrations of As were weakly correlated with high orchard density, consistent with a pesticide residue source. Arsenic concentrations in ground water wells in the region are generally <0.005 mg L(-1). There was no spatial association between As concentrations in ground water and proximity to orchards. Arsenic had limited mobility into ground water from surface soils contaminated with arsenical pesticide residues at concentrations typically found in orchards.     

Phosphorus forms in biosolids-amended soils and losses in runoff: effects of wastewater treatment process

Continuous addition of municipal biosolids to soils based on plant nitrogen (N) requirements can cause buildup of soil phosphorus (P) in excess of crop requirements; runoff from these soils can potentially contribute to nonpoint P pollution of surface waters. However, because biosolids are often produced using lime and/or metal salts, the potential for biosolids P to cause runoff P losses can vary with wastewater treatment plant (WWTP) process. This study was conducted to determine the effect of wastewater treatment process on the forms and amounts of P in biosolids, biosolids-amended soils, and in runoff from biosolids-amended soils. We amended two soil types with eight biosolids and a poultry litter (PL) at equal rates of total P (200 kg ha(-1); unamended soils were used as controls. All biosolids and amended soils were analyzed for various types of extractable P, inorganic P fractions, and the degree of P saturation (acid ammonium oxalate method). Amended soils were placed under a simulated rainfall and all runoff was collected and analyzed for dissolved reactive phosphorus (DRP), iron-oxide-coated filter paper strip-extractable phosphorus (FeO-P), and total phosphorus (EPA3050 P). Results showed that biosolids produced with a biological nutrient removal (BNR) process caused the highest increases in extractable soil P and runoff DRP. Alternatively, biosolids produced with iron only consistently had the lowest extractable P and caused the lowest increases in extractable soil P and runoff DRP when added to soils. Differences in soil and biosolids extractable P levels as well as P runoff losses were related to the inorganic P forms of the biosolids.     

Trihalomethane reactivity of water- and sodium hydroxide-extractable organic carbon fractions from peat soils

Certain organic carbon moieties in drinking source waters of the Sacramento-San Joaquin Delta can react with chlorine during disinfection to form potentially carcinogenic and mutagenic trihalomethanes. The properties of reactive organic carbon in Delta waters, particularly those of soil origin, have been poorly understood. This study attempts to characterize trihalomethane reactivity of soil organic carbon from three representative Delta peat soils. Soil organic carbon was extracted from all three soils with either deionized H2O or 0.1 M NaOH and sequentially separated into humic acids, fulvic acids, and nonhumic substances for quantitation of trihalomethane formation potential. Water-extractable organic carbon represented only 0.4 to 0.7% of total soil organic carbon, whereas NaOH extracted 38 to 51% of total soil organic carbon. The sizes and specific trihalomethane formation potential (STHMFP) of individual organic carbon fractions differed with extractants. Fulvic acids were the largest fraction in H2O-extractable organic carbon, whereas humic acids were the largest fraction in NaOH-extractable organic carbon. Among the fractions derived from H2O-extractable carbon, fulvic acids had the greatest specific ultraviolet absorbance and STHMFP and had the majority of reactive organic carbon. Among the fractions from NaOH-extractable organic carbon, humic acids and fulvic acids had similar STHMFP and, thus, were equally reactive. Humic acids were associated with the majority of trihalomethane reactivity of NaOH-extractable organic carbon. The nonhumic substances were less reactive than either humic acids or fulvic acids regardless of extractants. Specific ultraviolet absorbance was not a good predictor of trihalomethane reactivity of organic carbon fractions separated from the soils.     

Soil microbial communities associated with Bt and non-Bt corn in three soils

The effects of expression of Cry endotoxin by Bt corn (transgenic corn engineered to express Bacillus thuringiensis toxin) on soil microbial community structure were assessed in a growth chamber experiment. Two lines of transgenic corn expressing different Cry endotoxins were compared with their respective non-transgenic isolines in three soil types with differing textures. Phospholipid fatty acid (PLFA) profiles from bulk soil and community-level physiological profiles (CLPP) from the rhizosphere community were used to assess community structure. Differences in PLFA profiles due to soil type were significant, accounting for 73% of the total variability in the dataset. Differences in bacterial and fungal CLPP profiles due to soil type were statistically significant, but probably not biologically important, accounting for 6.3 and 3.8% of the total variability, respectively. Neither expression of Cry endotoxin nor corn line had a significant effect on microbial profiles, except in the high-clay soil where both factors significantly affected bacterial CLPP profiles (accounting for 6.6 and 6.1% of the variability in that soil, respectively). Expression of Cry endotoxin also significantly reduced the presence of eukaryotic PLFA biomarker in bulk soils, although it is unclear which groups of eukaryotes were affected. We conclude that the effects of transgenic Bt corn in this short-term experiment are small, and longer-term investigations are necessary.     

Microbial response to heavy metal-polluted soils: community analysis from phospholipid-linked fatty acids and ester-linked fatty acids extracts

Heavy metal pollution of soil is of concern for human health and ecosystem function. The soil microbial community should be a sensitive indicator of metal contamination effects on bioavailability and biogeochemical processes. Simple methods are needed to determine the degree of in situ pollution and effectiveness of remediating metal-contaminated soils. Currently, phospholipid-linked fatty acids (PLFAs) are preferred for microbial profiling but this method is time consuming, whereas direct soil extraction and transesterification of total ester-linked fatty acids (ELFAs) is attractive because of its simplicity. The 1998 mining acid-metal spill of >4000 ha in the Guadiamar watershed (southwestern Spain) provided a unique opportunity to study these two microbial lipid profiling methods. Replicated treatments were set up as nonpolluted, heavy metal polluted and reclaimed, and polluted soils. Inferences from whole community-diversity analysis and correlations of individual fatty acids with metals suggested Cu, Cd, and Zn were the most important in affecting microbial community structure, along with pH. The microbial stress marker, monounsaturated fatty acids, was significantly lower for reclaimed and polluted soil over nonpolluted soils for both PLFA and ELFA extraction. Another stress marker, the monounsaturated to saturated fatty acids ratio, only showed this for the PLFA. The general fungal marker (18:2omega6c), the arbuscule mycorrhizae marker (16:1omega5c), and iso- and anteiso-branched PLFAs (gram positive bacteria) were suppressed with increasing pollution whereas 17:0cy (gram negative bacteria) increased with metal pollution. For both extraction methods, richness and diversity were greater in nonpolluted soils and lowest in polluted soils. The ELFA method was sensitive for reflecting metal pollution on microbial communities and could be suitable for routine use in ecological monitoring and risk assessment programs because of its simplicity and reproducibility.     

The effect of cerium oxide additive on the performance and emission characteristics of a CI engine operated with rice bran biodiesel and its blends

In this study, the rice bran oil (RBO) has been converted into methyl ester with an aid of transesterification reaction. Chemically, transesterification means conversion of triglyceride molecule or a complex fatty acid into alcohol and ester by removing the glycerin and neutralizing the free fatty acids. The B20 blend samples [80% diesel + 20% biodiesel] were prepared for each methyl ester obtained from RBO and then the cerium oxide (CeO₂) nanoparticles were added to the each B20 blend samples at a dosage of 50 ppm and 100 ppm with an aid of ultrasonicator. Moreover, in the absence of any engine modifications, the performance and emission characteristics of those blend samples have been investigated from the experimentally measured values such as density, viscosity, cloud point, pour point, and calorific value while the engine performance was also analyzed through the parameters like exhaust gas temperature (EGT), brake specific fuel consumption (BSFC), brake thermal efficiency (BTE), exhaust emission of carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NOx). The experimental results reveal that the use of CeO₂ blended biodiesel in diesel engine has exhibited good improvement in performance characteristic and reduction in exhaust emissions.     

Multi-objective optimization of a novel crude lipase-catalyzed fatty acid methyl ester (FAME) production using low-order polynomial and Kriging models

In this paper, conventional response surface methodology (RSM) based on low-order polynomials and an alternative Kriging-based method are used for the model-based single and multi-objective optimization of fatty-acid methyl ester (FAME) production catalyzed by a novel crude lipase from the yeast Cryptococcus diffluens (D44). The coefficient of determination for the two modeling approaches was calculated as 0.97 for the Kriging method, and 0.86 for RSM; showing a more reliable representation of experimental data by Kriging. Both models were used to perform single (maximizing FAME titer and temporal productivity separately) and multi-objective (maximizing FAME titer and temporal productivity simultaneously) optimizations of four important operating conditions (reaction time and temperature; amount of crude enzyme; and volume of methanol used). In all cases, the highest temperature considered (60°C) gave the best results. A reduction of reaction time in half was seen to be necessary to achieve optimum productivity compared to titer, when the two objectives were considered separately. The observed trade-off between the two objectives was quantified via multi-objective optimization using Pareto-front analysis.     

Spatial distributions and potential risk analysis of total soil selenium in Guangdong Province, China

A total of 260 soil profiles were examined to investigate the spatial distribution of total soil selenium (Se) in Guangdong province, China. In the investigated area, the soil Se concentrations follow an approximately lognormal distribution. The soil Se geometric mean concentration of 0.23 mg kg(-1) is higher than that of Chinese soils; however, Se concentration varies over the study area. The baseline concentration of 0.13 to 0.41 mg kg(-1) indicates that the soil Se concentration is mostly in the range of deficiency to medium level for surface soils in Guangdong province. In A-, B-, and C-horizon, soil Se spatial distribution is correlated with the nature of the parent material, with high Se concentration mainly located in limestone and sandshale areas and low Se concentration associated with purple shale and granite areas. The spatial distribution pattern of soil Se concentrations suggests that potential Se deficiency may be an issue for human health in this province. Moreover, due to soil degradation and erosion, calculated soil Se exported into surrounding waters could reach approximately 23,000 kg yr(-1) in the study area.     

Sorption and degradation characteristics of phosmet in two contrasting Australian soils

The organophosphate insecticide phosmet [phosphorodithioic acid, s-((1,3-dihydro-1,3-dioxo-2H-isoindol-2yl)methyl), o,o-dimethyl ester] is used to control red-legged earth mites (Halotydeus destructor), lucerne flea (Sminthurus viridis), and Oriental fruit moth (Cydia molesta) in horticulture and vegetable growing. This study was undertaken with two soils of contrasting properties to determine the extent to which sorption and degradation of the insecticide might influence its potential to leach from soil into receiving waters. Two soils were used: a highly organic, oxidic clay soil (Ferrosol) and a sandy soil low in organic matter (Podosol), sampled to 0.3 m depth. The extent of sorption and decomposition rate of a phosmet commercial formulation were measured in laboratory experiments. Sorption followed a Freundlich isotherm at all depths. The Freundlich coefficient K was significantly correlated (p = 0.005) with organic C content in the Podosol, and significantly correlated (p = 0.005) with organic C and clay content in the Ferrosol. K was highest (48.8 L kg-1) in the 0- to 0.05-m depth of the Ferrosol, but lowest (1.0 L kg-1) at this depth in the Podosol. Degradation followed first-order kinetics, with the phosmet half-life ranging from 14 h (0-0.05 m depth) to 187 h (0.2-0.3 m depth) in the Ferrosol. The half-life was much longer in the sandy Podosol, ranging from 462 to 866 h, and did not change significantly with depth. Soil organic C and to a lesser degree clay content influenced phosmet sorption and degradation, but the interaction was complex and possibly affected by co-solvents present in the commercial formulation.     

Soil microbial communities and enzyme activities under various poultry litter application rates

The potential excessive nutrient and/or microbial loading from mismanaged land application of organic fertilizers is forcing changes in animal waste management. Currently, it is not clear to what extent different rates of poultry litter impact soil microbial communities, which control nutrient availability, organic matter quality and quantity, and soil degradation potential. From 2002 to 2004, we investigated the microbial community and several enzyme activities in a Vertisol soil (fine, smectitic, thermic, Udic Haplustert) at 0 to 15 cm as affected by different rates of poultry litter application to pasture (0, 6.7, and 13.4 Mg ha(-1)) and cultivated sites (0, 4.5, 6.7, 9.0, 11.2, and 13.4 Mg ha(-1)) in Texas, USA. No differences in soil pH (average: 7.9), total N (pasture: 2.01-3.53, cultivated: 1.09-1.98 g kg(-1) soil) or organic C (pasture average: 25-26.7, cultivated average: 13.9-16.1 g kg(-1) soil) were observed following the first four years of litter application. Microbial biomass carbon (MBC) and nitrogen (MBN) increased at litter rates greater than 6.7 Mg ha(-1) (pasture: MBC = >863, MBN = >88 mg kg(-1) soil) compared to sites with no applied litter (MBC = 722, MBN = 69 mg kg(-1) soil). Enzyme activities of C (beta-glucosidase, alpha-galactosidase, beta-glucosaminidase) or N cycling (beta-glucosaminidase) were increased at litter rates greater than 6.7 Mg ha(-1). Enzyme activities of P (alkaline phosphatase) and S (arylsulfatase) mineralization showed the same response in pasture, but they were only increased at the highest (9.0, 11.2, and 13.4 Mg ha(-1)) litter application rates in cultivated sites. According to fatty acid methyl ester (FAME) analysis, the pasture soils experienced shifts to higher bacterial populations at litter rates of 6.7 Mg ha(-1), and shifts to higher fungal populations at the highest litter application rates in cultivated sites. While rates greater than 6.7 Mg ha(-1) provided rapid enhancement of the soil microbial populations and enzymatic activities, they result in P application in excess of crop needs. Thus, studies will continue to investigate whether litter application at rates below 6.7 Mg ha(-1), previously recommended to maintain water quality, will result in similar improved soil microbial and biochemical functioning with continued annual litter application.     

THE IMPORTANCE OF SOIL IN EVALUATING POTENTIAL WASTE WATER DISPOSAL SITES IN THE MISSOURI OZARKS1

ABSTRACT: A number of criteria can be used in the selection of an area for the irrigation disposal of secondary treated waste water. The inherent capacity of the surface soil to retain, or at least detain, the various nutrient ions passing through the profile in the percolating waters becomes the prime consideration in regions with shallow water tables or in Karst areas such as the Missouri Ozarks where the risk of ground water supply contamination is high. A comprehensive study of the nutrient renovation potential of several soils was undertaken at a proposed effluent irrigation site along the Ozark National Scenic Riverways in south central Missouri. The surface soil hydrology was evaluated employing selected soil water parameters. Exchange equilibria studies determined the retention capacity for Ca and Mg while the concentrations of other selected ions were analyzed in the soil water to measure their retention time and net removal. The movement of a bromine tracer was monitored as an index of the renovation capacity of these soils for the more mobile anions such as nitrate. Neutron activation analysis proved to be a useful tool in the water quality analyses. All surface soil profiles demonstrated some degree of nutrient renovation for the various nutrients studied.     

Soil chemical changes resulting from irrigation with water co-produced with coalbed natural gas

Land application of coalbed natural gas (CBNG) co-produced water is a popular management option within northwestern Powder River Basin (PRB) of Wyoming. This study evaluated the impacts of land application of CBNG waters on soil chemical properties at five sites. Soil samples were collected from different depths (0-5, 5-15, 15-30, 30-60, 60-90, and 90-120 cm) from sites that were irrigated with CBNG water for 2 to 3 yr and control sites. Chemical properties of CBNG water used for irrigation on the study sites indicate that electrical conductivity of CBNG water (EC(w)) and sodium adsorption ratio of CBNG water (SAR(w)) values were greater than those recommended for irrigation use on the soils at the study sites. Soil chemical analyses indicated that electrical conductivity of soil saturated paste extracts (EC(e)) and sodium adsorption ratio of soil saturated paste extracts (SAR(e)) values for irrigated sites were significantly greater (P < 0.05) than control plots in the upper 30-cm soil depths. Mass balance calculations suggested that there has been significant buildup of Na in irrigated soils due to CBNG irrigation water as well as Na mobilization within the soil profiles. Results indicate that irrigation with CBNG water significantly impacts certain soil properties, particularly if amendments are not properly utilized. This study provides information for better understanding changes in soil properties due to land application of CBNG water. These changes must be considered in developing possible criteria for preserving fragile PRB ecosystems.     

Particulate phosphorus and sediment in surface runoff and drainflow from clayey soils

Recent work has shown that a significant portion of the total loss of phosphorus (P) from agricultural soils may occur via subsurface drainflow. The aim of this study was to compare the concentrations of different P forms in surface and subsurface runoff, and to assess the potential algal availability of particulate phosphorus (PP) in runoff waters. The material consisted of 91 water-sample pairs (surface runoff vs. subsurface drainage waters) from two artificially drained clayey soils (a Typic Cryaquept and an Aeric Cryaquept) and was analyzed for total suspended solids (TSS), total phosphorus (TP), dissolved molybdate-reactive phosphorus (DRP), and anion exchange resin-extractable phosphorus (AER-P). On the basis of these determinations, we calculated the concentrations of PP, desorbable particulate phosphorus (PPi), and particulate unavailable (nondesorbable) phosphorus (PUP). Some water samples and the soils were also analyzed for 137Cs activity and particle-size distribution. The major P fraction in the waters studied was PP and, on average, only 7% of it was desorbable by AER. However, a mean of 47% of potentially bioavailable P (AER-P) consisted of PPi. The suspended soil material carried by drainflow contained as much PPi (47-79 mg kg-1) as did the surface runoff sediment (45-82 mg kg-1). The runoff sediments were enriched in clay-sized particles and 137Cs by a factor of about two relative to the surface soils. Our results show that desorbable PP derived from topsoil may be as important a contributor to potentially algal-available P as DRP in both surface and subsurface runoff from clayey soils.     

Relationships between phosphorus levels in soil and in runoff from corn production systems

Phosphorus-enriched runoff from cropland can hasten eutrophication of surface waters. A soil P level exceeding crop needs due to long-term fertilizer and/or manure applications is one of several potential sources of increased P losses in runoff from agricultural systems. Field experiments were conducted at locations representative of three major soil regions in Wisconsin in corn (Zea mays L.) production systems to determine the effect of tillage, recent manure additions, soil P extraction method, and soil sampling depth (0-2, 0-5, and 0-15 cm) on the relationship between soil test P level and P concentrations in runoff. Runoff from simulated rainfall (75 mm h(-1)) was collected from 0.83-m2 areas for 1 h after rainfall initiation and analyzed for dissolved phosphorus (DP), total phosphorus (TP), and sediment. The DP fraction of the TP concentration in runoff ranged from 5 to 17% among sites with most of the variation in TP due to varying sediment concentration on the well-drained silt loam soils and to soil test P level on the poorly drained silty clay loam soil. In 213 observations across a range of soils and managements, good relationships occurred between soil test P level and DP concentration in runoff for most of the tests and sampling depths used. Recent manure additions and high levels of surface cover from corn residue sometimes masked this relationship. The slope of DP relative to soil test P level was markedly higher on the silty clay loam soil than on the silt loam soils possibly due to soil permeability-infiltration rate differences. Agronomic soil P tests were as effective as environmentally oriented soil P tests for predicting DP concentrations in runoff.     

Changes in Microbial Community Structure and Soil Biological Properties in Mined Dune Areas During Re-vegetation

The aim of this study was to describe the impact of re-vegetation on the restoration of microbial community structure and soil microbiological properties in sand dunes that had been affected by mining activity. Soil samples were collected during the dry and rainy seasons from a chronosequence (1, 9, 21 years) of re-vegetated dunes using a single preserved dune as a reference. The composition of the fatty acid methyl esters and soil microbial properties were evaluated. The results showed that the changes in microbial community structure were related to seasonal variations: biomarkers of Gram-positive bacteria were higher than Gram-negative bacteria during the dry season, showing that this group of organisms is more tolerant to these stressful conditions. The microbial community structure in the natural dune was less affected by seasonal variation compared to the re-vegetated areas, whereas the opposite was observed for microbiological properties. Thus, in general, the proportion of saprobic fungi was higher in the natural dune, whereas Gram-negative bacteria were proportionally more common in the younger areas. Although over time the re-vegetation allows the recovery of the microbial community and the soil functions, these communities and functions are different from those found in the undisturbed areas.