Assessing national livestock populations for the production of methane emission inventories

In an effort to accurately assess national methane (CH₄) production levels, many African countries are producing inventories of their national livestock populations. Conducting accurate livestock surveys is an expensive and time-consuming process, but is necessary because the most readily available data on livestock production are often incomplete or unsatisfactory. This paper looks at practical approaches to collecting data on livestock production and on the reproductive parameters for livestock, with special reference to African pastoralist populations, and makes qualified recommendations as to how inventory teams might be able to produce more accurate assessments of their total livestock populations. The methodology used during Nigeria's National Livestock Census (1990–92) serves as a basis for a discussion of the issues.     

Characterization of fine aerosol and its inorganic components at two rural locations in New York State

Samples of PM(2.5) were collected to measure the concentrations of its chemical constituents at two rural locations, Potsdam and Stockton, NY from November 2002 to August 2005. These samples were collected on multiple filters at both sites, every third day for a 24-h interval with a speciation network sampler. The Teflo(R) filters were analyzed for PM(2.5) mass by gravimetry, and elemental composition by X-ray fluorescence (XRF). Nylasorb(R) filters and Teflo(R) filters were leached with water and analyzed for anions and cations, respectively, by ion chromatography (IC). Fine particulate matter (PM(2.5)) mass and its inorganic component measurements were statistically characterized, and the temporal behavior of these species were assessed. Over the entire study period, PM(2.5) mass concentrations were lower at Potsdam (8.35 mug/m(3)) than at Stockton (10.24 mug/m(3)). At both locations, organic matter (OM) was the highest contributor to mass. Sulfate was the second highest contributor to mass at 27.0% at Potsdam, and 28.7% at Stockton. Nitrate contributions to mass of 8.9 and 9.5% at Potsdam and Stockton, respectively, were the third highest. At both locations, fine PM mass exhibited an annual cycle with a pronounced summer peak and indications of another peak during the winter, consistent with an overall increase in the rate of secondary aerosol formation during the summer, and increased partitioning of ammonium nitrate to the particle phase and condensation of other semi-volatiles during the winter, respectively. An ion-balance analysis indicated that at both locations, during the summers as well as in the winters, the aerosol was acidic. Lognormal frequency distribution fits to the measured mass concentrations on a seasonal basis indicated the overall increase in particle phase secondary aerosol (sulfate and SOA) concentrations during the summers compared to the winters at both locations.     

Laboratory and field comparison of measurements obtained using the available diffusive samplers for ozone and nitrogen dioxide in ambient air

This study presents an evaluation of the extent of differences between measurements performed by O(3) and NO(2) diffusive samplers and by the reference methods for diffusive samplers commercially available. The tests were performed in an exposure chamber under extreme conditions of controlling factors and under field conditions. For NO(2), the results of the laboratory experiments showed that most of the diffusive samplers were affected by extreme exposure conditions. The agreement between the samplers and the reference method was better for the field tests than for the laboratory ones. The estimate of the uptake rate for the exposure conditions using a model equation improved the agreement between the diffusive samplers and the reference methods. The agreement between O(3) measured by the diffusive samplers and by the reference method was satisfactory for 1-week exposure. For 8-hour exposures, the diffusive samplers with high uptake rates quantified better the O(3) concentration than the samplers with low uptake rates. As for NO(2), the results of the O(3) field tests were in better agreement with the reference method than the ones of the laboratory tests. The field tests showed that the majority of diffusive samplers fulfils the 25% uncertainty requirement of the NO(2) European Directive and the 30% uncertainty requirement of the O(3) European Directive for 1-week exposure.     

Re-construction of the shut-down PM10 monitoring stations for the reliable assessment of PM10 in Berlin using fuzzy modelling and data transformation

A dense monitoring network is vital for the reliable assessment of PM10 in different parts of an urban area. In this study, a new idea is employed for the re-construction of the 20 shut-down PM10 monitoring stations of Berlin. It endeavours to find the non-linear relationship between the hourly PM10 concentration of both the still operating and the shut-down PM10 monitoring stations by using a fuzzy modelling technique, called modified active learning method (MALM). In addition, the simulations were performed by using not only raw PM10 databases but also log-transformed PM10 databases for skewness reduction. According to the results of hourly PM10 simulation (root mean square error about 13.0 μg/m³, correlation coefficient 0.88), the shut-down stations have been appropriately simulated and the idea of dense monitoring network development by the re-construction of the shut-down stations was realised. The results of simulations using raw and log-transformed databases showed that data transformation has no significant effect on the performance of MALM in the simulation of shut-down PM10 stations. By the combination of the 11 still operating stations and the 20 re-constructed stations, a dense monitoring network was generated for Berlin and was utilised for the calculation of the reliable monthly and mean annual PM10 concentration for five different PM10 zones in Berlin (the suburban-background, urban-background, urban-traffic, rural-background and suburban-traffic areas). The results showed that the mean annual concentration of PM10 at the five zones increased by about 13.0% in 2014 (26.3 μg/m³) in comparison with 2013 (23.3 μg/m³). Furthermore, the mean annual concentration of PM10 in the traffic lanes of the suburban (2013 25.0 μg/m³, 2014 26.9 μg/m³) and urban (2013 27.7 μg/m³, 2014 31.3 μg/m³) areas is about 14 and 20% higher than the PM10 concentration of suburban-background (2013 21.3 μg/m³, 2014 24.5 μg/m³) and urban-background (2013 23.0 μg/m³, 2014 26.1 μg/m³) areas, respectively.     

Development of an efficient and sensitive analytical method for the determination of copper at trace levels by slotted quartz tube atomic absorption spectrometry after vortex-assisted dispersive liquid-liquid microextraction in biota and water samples using a novel ligand

This study describes the determination of trace levels of copper by slotted quartz tube atomic absorption spectrometry after dispersive liquid-liquid microextraction. A ligand synthesized from the reaction of salicylaldehyde and 1-naphthylamine was used to form coordinate copper complex prior to extraction. All parameters that influence the output of complex formation, extraction, and instrumental measurement were optimized to enhance the absorbance signal of copper. Under the optimum conditions, about 104-fold enhancement in sensitivity was recorded over the conventional flame atomic absorption spectrometer, corresponding to a 0.51 ng/mL detection limit. The percent relative standard deviation calculated for the lowest concentration (4.8%) indicated high precision for the experimental procedure. Accuracy and applicability of the optimum method were determined by performing spiked recovery tests on urine, lake water, and mineral water samples. Satisfactory recovery results were obtained between 82.2 and 106.3% at four different concentrations. Matrix matching method was also performed to increase the accuracy of quantification, and the percent recovery calculated for 175 ng/mL was 105.14%.