油气处理场站温室气体甲烷排放特征与量化

油气生产过程是甲烷重点排放源,对气候变化产生显著影响。采用便携式火焰离子检测器 (FID) 和Hi-Flow大流量仪等设备,对我国某油田3座油气处理场站甲烷泄漏排放特征进行了研究,明确了组件泄漏率,量化了重点源项甲烷排放速率,构建了设备设施甲烷排放因子,开展了甲烷排放量核算并提出了管控建议。结果表明,该油田油气处理场站设备组件与管线的甲烷泄漏率为0.7%~1.2%,压力表、阀门和储罐等在泄漏源项中占比较高。不同类型泄漏组件甲烷排放速率具有显著差异,处理场站的甲烷排放速率为111.66~274.63 L·min⁻¹。单个储罐和场站的甲烷排放因子分别为989.9 L·h⁻¹和0.19 L·m⁻³。3座场站年度甲烷排放量为303 783.40 m³,储罐是首要排放源,对总排放量贡献占比为94.1%。组件泄漏导致的甲烷排放主要源于高强度排放源,15%的泄漏点贡献了排放量的88.4%。该研究结果可为油田油气处理场站泄漏防控和温室气体排放控制提供参考。     

填埋场沼气发电的温室气体减排效益分析

填埋场沼气是垃圾卫生填埋场产生的可利用资源.以深圳下坪垃圾填埋场为例,定量分析垃圾填埋气体发电的温室气体减排效益.结果表明,填埋场沼气发电具有很好的经济效益和环境效益,可作为与发达国家进行CDM(清洁发展机制)项目合作的优先技术领域.     

Analysis of urban carbon emission efficiency and influencing factors in the Yellow River Basin

Environmental Science and Pollution Research - The Yellow River Basin is an energy-rich area. The low-carbon development of the Yellow River Basin is one of the ways to achieve ecological...     

Assessing the benefits of the greenhouse gas emission reduction policy: a pilot case study of Korea

Reducing greenhouse gas (GHG) emissions to avert or slow climate change has become an increasingly important policy issue in developing countries such as Korea, as well as in developed countries. This paper uses the willingness to pay survey technique to assess the benefits that would ensue from a proposed OHO emissions reduction policy. It aims to provide at least a preliminary evaluation of the policy, using Korea as a specific case study. Respondents overall accepted the contingent market and were on average willing to contribute a significant amount toward the GHG emissions reduction policy. This willingness varies according to respondents' individual characteristics and environmental concerns. Finally, this study discusses the importance of including the climate change problem in cost—benefit analysis and presents the policy implications of the results.     

Application of dynamic models to estimate greenhouse gas emission by wastewater treatment plants of the pulp and paper industry

Greenhouse gas (GHG) emission in wastewater treatment plants of the pulp-and-paper industry was estimated by using a dynamic mathematical model. Significant variations were shown in the magnitude of GHG generation in response to variations in operating parameters, demonstrating the limited capacity of steady-state models in predicting the time-dependent emissions of these harmful gases. The examined treatment systems used aerobic, anaerobic, and hybrid—anaerobic/aerobic—biological processes along with chemical coagulation/flocculation, anaerobic digester, nitrification and denitrification processes, and biogas recovery. The pertinent operating parameters included the influent substrate concentration, influent flow rate, and temperature. Although the average predictions by the dynamic model were only 10 % different from those of steady-state model during 140 days of operation of the examined systems, the daily variations of GHG emissions were different up to ±30, ±19, and ±17 % in the aerobic, anaerobic, and hybrid systems, respectively. The variations of process variables caused fluctuations in energy generation from biogas recovery by ±16, ±17, and ±14 % in the three examined systems, respectively. The lowest variations were observed in the hybrid system, showing the stability of this particular process design.     

Assessing the uncertainty associated with national greenhouse gas emission inventories:: a case study for Austria

The uncertainty associated with the Austrian Greenhouse Gas emission inventory has been determined for the gases CO₂, CH₄ and N₂O and for the overall greenhouse potential. Expert interviews were conducted to obtain uncertainties in inventory input data. Based on these interviews, error distributions were developed and combined using Monte-Carlo analysis. Results for all sources and gases combined indicate an overall uncertainty between 10.5% and 12% depending on the base year considered. Excluding emissions and the uncertainty associated with forest sinks and natural sources, overall uncertainty decreased by 2% points. The mere ‘random error’, which is considered the level of uncertainty to be achieved with the current methodology (excluding all systematic errors) is 5% points lower. Detailed evaluation shows that much of the overall uncertainty derives from a lack of understanding the processes associated with N₂O emissions from soils. Other important contributors to GHG emission uncertainties are CH₄ from landfills and forests as CO₂ sinks. The uncertainty of the trend has been determined at near 5% points, with solid waste production (landfills) having the strongest contribution. Theoretical considerations do not permit a decrease of the trend uncertainty—even when forest sinks are not considered—below 3% points.     

Sources and emission of greenhouse gases in Danube Delta lakes

Production of methane and carbon dioxide as well as methane concentrations in surface waters and emissions to the atmosphere were investigated in two flow-through lake complexes (Uzlina–Isac and Puiu–Rosu–Rosulet) in the Danube Delta during post-flood conditions in May and low water level in September 2006. Retained nutrients fuelled primary production and remineralisation of bioavailable organic matter. This led to an observable net release of methane, particularly in the lakes Uzlina, Puiu and Rosu in May. Input from the Danube River, from redbuds and benthic release contributed to CH₄ concentrations in surface waters. In addition to significant river input of CO₂, this trace gas was released via aerobic remineralisation within the water column and in top sediments. Emission patterns of CO₂ widely overlapped with those of CH₄. Generally, greenhouse gas emissions peaked in the lake complex adjacent to the Danube River in May due to strong winds and decreased with increasing hydrological distance from the Danube River. Intense remineralisation of organic matter in the Danube Delta lakes results in a net source of atmospheric greenhouse gases.     

Sources and emission of greenhouse gases in Danube Delta lakes

Production of methane and carbon dioxide as well as methane concentrations in surface waters and emissions to the atmosphere were investigated in two flow-through lake complexes (Uzlina–Isac and Puiu–Rosu–Rosulet) in the Danube Delta during post-flood conditions in May and low water level in September 2006. Retained nutrients fuelled primary production and remineralisation of bioavailable organic matter. This led to an observable net release of methane, particularly in the lakes Uzlina, Puiu and Rosu in May. Input from the Danube River, from redbuds and benthic release contributed to CH₄ concentrations in surface waters. In addition to significant river input of CO₂, this trace gas was released via aerobic remineralisation within the water column and in top sediments. Emission patterns of CO₂ widely overlapped with those of CH₄. Generally, greenhouse gas emissions peaked in the lake complex adjacent to the Danube River in May due to strong winds and decreased with increasing hydrological distance from the Danube River. Intense remineralisation of organic matter in the Danube Delta lakes results in a net source of atmospheric greenhouse gases.     

Agriculture,dairy and fishery farming practices and greenhouse gas emission footprint: a strategic appraisal for mitigation

Rising global population would force farmers to amplify food production substantially in upcoming 3–4 decades. The easiest way to increase grain production is through expanding cropping area by clearing uncultivated land. This is attained by permitting deadly loss of carbon (C) stocks, jeopardizing ecosystem biodiversity and deteriorating environmental quality. We aim to propose key agronomical tactics, livestock management strategy and advance approaches for aquaculture to increase productivity and simultaneously reduce the environmental impacts of farming sector. For this, we considered three major sectors of farming, i.e. agriculture, fishery and dairy. We collected literatures stating approaches or technologies that could reduce GHG emission from these sectors. Thereafter, we synthesized strategies or options that are more feasible and accessible for inclusion in farm sector to reduce GHG emission. Having comprehensively reviewed several publications, we propose potential strategies to reduce GHG emission. Agronomic practices like crop diversification, reducing summer fallow, soil organic carbon sequestration, tillage and crop residue management and inclusion of N2-fixing pulses in crop rotations are some of those. Livestock management through changing animals’ diets, optimal use of the gas produced from manures, frequent and complete manure removal from animal housing and aquaculture management strategies to improve fish health and improve feed conversion efficiency could reduce their GHG emission footprint too. Adapting of effective and economic practices GHG emission footprint reduction potential of farming sector could make farming sector a C neutral enterprise. To overcome the ecological, technological and institutional barriers, policy on trade, tax, grazing practice and GHG pricing should be implemented properly.     

Performance analysis and life cycle greenhouse gas emission assessment of an integrated gravitational-flow wastewater treatment system for rural areas

Environmental Science and Pollution Research - Due to the lack of appropriate wastewater treatment facility in rural areas, the discharging of wastewater without sufficient treatment results in...     

Regional and sectoral assessment of greenhouse gas emissions in India

In this paper the authors have estimated for 1990 and 1995 the inventory of greenhouse gases CO₂, CH₄ and N₂O for India at a national and sub-regional district level. The district level estimates are important for improving the national inventories as well as for developing sound mitigation strategies at manageable smaller scales. Our estimates indicate that the total CO₂, CH₄ and N₂O emissions from India were 592.5, 17, 0.2 and 778, 18, 0.3 Tg in 1990 and 1995, respectively. The compounded annual growth rate (CAGR) of these gases over this period were 6.3, 1.2 and 3.3%, respectively. The districts have been ranked according to their order of emissions and the relatively large emitters are termed as hotspots. A direct correlation between coal consumption and districts with high CO₂ emission was observed. CO₂ emission from the largest 10% emitters increased by 8.1% in 1995 with respect to 1990 and emissions from rest of the districts decreased over the same period, thereby indicating a skewed primary energy consumption pattern for the country. Livestock followed by rice cultivation were the dominant CH₄ emitting sources. The waste sector though a large CH₄ emitter in the developed countries, only contributed about 10% the total CH₄ emission from all sources as most of the waste generated in India is allowed to decompose aerobically. N₂O emissions from the use of nitrogen fertilizer were maximum in both the years (more than 60% of the total N₂O). High emission intensities, in terms of CO₂ equivalent, are in districts of Gangetic plains, delta areas, and the southern part of the country. These overlap with districts with large coal mines, mega power plants, intensive paddy cultivation and high fertilizer use. The study indicates that the 25 highest emitting districts account for more than 37% of all India CO₂ equivalent GHG emissions. Electric power generation has emerged as the dominant source of GHG emissions, followed by emissions from steel and cement plants. It is therefore suggested, to target for GHG mitigation, the 40 largest coal-based thermal plants, five largest steel plants and 15 largest cement plants in India as the first step.     

Anthropogenic mercury emission inventory with emission factors and total emission in Korea

Mercury emissions concentrations, emission factors, and the total national emission from major anthropogenic sources in Korea for the year 2007 were estimated. Uncontrolled and controlled mercury emission factors and the total emission from each source types are presented. The annual national mercury emission from major anthropogenic sources for the year 2007, on average was 12.8 ton which ranged from 6.5 to 20.2 ton. Averaged emissions of elemental, oxidized, and particulate mercury were estimated at 8.25 ton, 3.69 ton, and 0.87 ton, respectively. Due to the removal of a major portion of particulate and oxidized mercury species, elemental mercury was dominant in stack emission. About 54.8% of mercury emission was contributed by industrial sources, 45.0% by stationary combustion sources and 0.02% by mobile sources. Thermal power plants, oil refineries, cement kilns and incinerators (municipal, industrial, medical, sewage sludge) were the major mercury emitters, contributing about 26%, 25%, 21% and 20%, respectively to the total mercury emission. Other sources (crematory, pulp and paper manufacturing, nonferrous metals manufacturing, glass manufacturing) contributed about 8% of the total emission. Priority should be given in controlling mercury emissions from coal-fired power plants, oil refineries, cement kilns and waste incinerators. More measurements including natural and re-emission sources are to be carried out in the future in order to have a clear scenario of mercury emission from the country and to apply effective control measures.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

On-road remote sensing of liquefied petroleum gas (LPG) vehicle emissions measurement and emission factors estimation

In the present study, the real-world on-road liquefied petroleum gas (LPG) vehicle/taxi emissions of carbon monoxide (CO), hydrocarbon (HC) and nitric oxide (NO) were investigated. A regression analysis approach based on the measured LPG vehicle emission data was also used to estimate the on-road LPG vehicle emission factors of CO, HC and NO with respect to the effects of instantaneous vehicle speed and acceleration/deceleration profiles for local urban driving patterns. The results show that the LPG vehicle model years and driving patterns have a strong correlation to their emission factors. A unique correlation of LPG vehicle emission factors (i.e., g km⁻¹ and g l⁻¹) on different model years for urban driving patterns has been established. Finally, a comparison was made between the average LPG, and petrol [Chan, T.L., Ning, Z., Leung, C.W., Cheung, C.S., Hung, W.T., Dong, G., 2004. On-road remote sensing of petrol vehicle emissions measurement and emission factors estimation in Hong Kong. Atmospheric Environment 38, 2055–2066 and 3541] and diesel [Chan, T.L., Ning, Z., 2005. On-road remote sensing of diesel vehicle emissions measurement and emission factors estimation in Hong Kong. Atmospheric Environment 39, 6843–6856] vehicle emission factors. It has shown that the introduction of the replacement of diesel taxis to LPG taxis has alleviated effectively the urban street air pollution. However, it has demonstrated that proper maintenance on the aged LPG taxis should also be taken into consideration.     

Cross-sections and quantum yields for the atmospheric photolysis of the potent greenhouse gas nitrogen trifluoride

Although NF₃, a trace gas of purely anthropogenic origin with a large global warming potential is accumulating in the Earth's atmosphere, little photochemical data exists from which to calculate its atmospheric removal rate. In this study, photodissociation quantum yields, Φ₁, were derived following 193.3 nm laser photolysis of NF₃, and quantitative conversion of the F-atom photoproducts to OH, which was detected by laser induced fluorescence. Values of Φ₁(P, T) = (1.03 ± 0.05) were determined at pressures between 28 and 100 mBar of He or N₂ and at either room temperature or 255 K. Absorption cross-sections, σ, obtained between 184 and 226 nm were combined with the values of Φ₁(P, T) to confirm a long (≈700 year) photolysis lifetime for NF₃. No evidence for reaction of OH with NF₃ was found, indicating that this process makes little or no contribution to NF₃ removal from the atmosphere. These results underpin recent calculations of an NF₃ atmospheric lifetime τ ≈ 550 years, largely controlled by photolysis in the stratosphere. In the course of this work the rate coefficient k₂(298 K) = (1.3 ± 0.2) × 10^?11 cm³ molecule^?1 s^?1 was obtained for the reaction F + H₂O.     

Regional effects and efficiency of flue gas desulphurization in the Carpathian Basin

Although sulphur emissions (mainly as SO₂) have been continuously decreasing over the last 20 years in most western industrialized countries, localized SO₂ problems still exist in conjunction with strong local emission, meteorological, and topographical factors. In this study, the effect of supplementary installed flue gas desulphurization (FGD) units at high-capacity power plants on regional air pollution in the Carpathian Basin is investigated. The dispersion and accumulation of the SO₂ air pollutant are studied with the regional three-dimensional on-line atmosphere-chemistry model REMOTE. The changes in the SO₂ air pollution are investigated by parallel simulations in a case study, where the single modified parameter is the SO₂ emission rate. The results show that FGD units significantly reduce the horizontal and the vertical dispersion of the emitted SO₂, and its transboundary transport, too. Beside the SO₂ removal efficiency, the dispersion and accumulation also depend on the seasonal weather conditions. During winter, the dispersion and accumulation are higher than in other seasons. Due to this phenomenon, higher SO₂ removal efficiency is needed to guarantee similar air quality features like in the other seasons.     

Definition of yearly emission factor of dust and greenhouse gases through continuous measurements in swine husbandry

The object of this study was to develop an accurate estimation method to evaluate the contribution of the various compartments of swine husbandry to dust and GHG (greenhouse gases, CO₂, CH₄ and N₂O) emission into the atmosphere during one year of observation.A weaning, a gestation, a farrowing and a fattening room in an intensive pig house were observed in three different periods (Autumn–Winter, Springtime and Summer, monitoring at least 60% of each period (20% at the beginning, in the middle and at the end) of each cycle).During monitoring, live weight, average live weight gain, number of animals and its variation, type of feed and feeding time were taken into account to evaluate their influence on PM₁₀, or the fraction of suspended particulate matter with an aerodynamic diameter less than or equal to 10 μm [Emission Inventory Guidebook, 2007. B1100 Particle Emissions from Animal Husbandry Activities. Available from: <http://reports.eea.europa.eu/EMEPCORINAIR5/en/B1100vs1.pdf> (accessed October 2008)] and to define GHG emission.The selected piggery had a ventilation control system using a free running impeller to monitor continuously real-time environmental and management parameters with an accuracy of 5%.PM₁₀ concentration was monitored by a sampler (Haz Dust EPAM 5000), either continuously or through traditional gravimetric technique, and the mean value of dust amount collected on the membranes was utilized as a correction factor to be applied to continuously collected data.PM₁₀ concentration amount incoming from inlets was removed from PM₁₀ emission calculation, to estimate the real contribution of pig house dust pollution into atmosphere.Mean yearly emission factor of PM₁₀ was measured in 2 g d^?1 LU^?1 for the weaning room, 0.09 g d^?1 LU^?1 for the farrowing room, 2.59 g d^?1 LU^?1 for the fattening room and 1.23 g d^?1 LU^?1 for the gestation room. The highest PM₁₀ concentration and emission per LU was recorded in the fattening compartment while the lowest value was recorded in the farrowing room.CO₂, CH₄ and N₂O concentrations were continuously measured in the exhaust ducts using an infrared photoacoustic detector IPD (Brüel & Kjaer, Multi-gas Monitor Type 1302, Multipoint Sampler and Doser Type 1303) sampling data every 15 min, for the 60% of the cycles.Yearly emission factor for CO₂ was measured in 5997 g d^?1 LU^?1 for the weaning room, 1278 g d^?1 LU^?1 for the farrowing room, 13,636 g d^?1 LU^?1 for the fattening room and 8851 g d^?1 LU^?1 for the gestation room.Yearly emission factor for CH₄ was measured in 24.57 g d^?1 LU^?1 for the weaning room, 4.68 g d^?1 LU^?1 for the farrowing room, 189.82 g d^?1 LU^?1 for the fattening room and 132.12 g d^?1 LU^?1 for the gestation room.Yearly emission factor for N₂O was measured in 3.62 g d^?1 LU^?1 for the weaning room, 0.66 g d^?1 LU^?1 for the farrowing room, 3.26 g d^?1 LU^?1 for the fattening room and 2.72 g d^?1 LU^?1 for the gestation room.     

北京市垃圾填埋气体排放模拟及CDM现状分析

为了理清北京固废系统潜在的环境影响及相关机制发展状况,本研究基于填埋气逸出模拟对北京市固废系统中的填埋气排放和CDM项目进行研究分析。将中国垃圾填埋气模型应用到北京市,预测其潜在垃圾填埋气排放总碳当量达0.97亿t,2026年左右迎来产气高峰,排放量为54 367 m3/h,碳当量达228万t,2015—2040年间的碳当量占比约53.3%;北京市CDM数据分析显示,2010年以来北京市CDM项目发展良好,但较全国水平稍显滞后,其垃圾填埋气回收利用项目占北京市获批CDM项目总量的11.1%,签发数比例约33.3%,远低于全国水平的41.82%。研究表明:北京市固废系统即将步入产气高峰期,潜在碳排放量巨大,势必将给北京市的温室气体减排工作带来切实压力,但是相关CDM项目发展不适应当前的减排需求,急需加强和改善北京市的城市固体废物管理,推进相关CDM项目在北京的良性发展。