火焰原子吸收光谱法测定烟囱烟灰中的铊

提出了火焰原子吸收光谱法测定冶炼厂烟囱烟灰中铊的分析方法。试验表明:方法检测限(3σ)为0 11mg/L,回收率在92%～103%之间,相对标准差<3%,方法简便快速。     

火焰原子吸收光谱法测定工业废水中的锌

以往对锌的测定,多采用双硫腙比色法、阳极溶出伏安法和EDTA容量法,但这些方法不是准确度差,就是操作繁琐不易掌握.实验证明,改用原子吸收光谱法进行测定,具有灵敏度高,精密度好且操作简便等特点.这不仅提高了监测工作的效率,而且避免了以往由于用化学试剂量多而引起二次污染.     

石墨炉原子吸收法测定环境水样中铊

对石墨炉原子吸收法测定水中铊的分析条件进行优化,并比较不同前处理方法对测定结果的影响。结果表明仪器的最佳分析条件为:灰化温度和原子化温度分别为700和1 600℃,进样量为40μL,基体改进剂为0.5%的钯与硝酸镁。直接进样、MIBK萃取法和铁沉淀富集3种前处理方法对应的检出限分别为0.76,0.07和0.02μg/L;分别测定5,0.5和0.1μg/L含铊水样,其相对标准偏差分别为4.2%,6.1%和8.4%,加标回收率分别为92%,91%和88%,即3种样品前处理方式下,石墨炉原子吸收法对环境水样中铊均具有较好的测定效果。直接进样法适用于铊浓度较高的水样,MIBK萃取法和铁沉淀法则适用于较清洁水样。     

火焰原子吸收光谱法测定水中银

采用硝酸消解样品,氘灯背景校正技术消除非特征吸收和光散射影响,火焰原子吸收光谱法测定水中银,方法简便可靠,检出限为0.010 mg/L,RSD为0.9%～6.6%,加标回收率为93.0%～101%.     

火焰原子吸收法测定锶

原子吸收分析方法作为元素分析的一种行之有效的手段,已广泛地应用于科研,生产和检测等各个方面.而且,火焰原子吸收法具有选择性好、测定精度高、应用范围广和快速简单等优点.同时由于仪器价格低廉,而成为一般实验室的常规分析仪器.锶的分析方法近年来有比色法,该法需严格控制pH,需有机试剂萃取,操作方法繁琐,特别存有稀土元素时干扰严重;石墨炉     

火焰原子吸收法间接测定工业废水中的硫化物

常规方法测定工业废水中的硫化物,水样都要作预处理.因预处理的方法不理想,造成硫化物的损失和分解,回收率较低;或是不能有效地分离干扰物,使分析结果产生较大正偏差.近年来发展的间接测定法仍有回收率低或氧化还原难掌握等缺陷.因此,建立一种精密度好、准确度高的硫化物分析方法,已列为国家环保科研课题.     

火焰、石墨炉原子吸收法测定地表水中铜和镉

对浓缩火焰原子吸收法和石墨炉原子吸收法测定地表水中痕量铜和镉的结果作了比较。试验结果表明，两种方法测定结果间无明显差异，加标回收率为88．7％～103％，可互相替代，等效使用。     

火焰原子吸收法测定土壤中的铅

建立了一种以 HNO3-HCl-HCl O4 -HF对土壤样品进行消化 ,火焰原子吸收测定铅的方法。该法用于实际样品的测定时 ,相对标准偏差小于 2 .3 % ,加标回收率为 98%～ 1 0 2 %。     

石墨炉原子吸收法测定水中铊的方法改进

采用石墨炉原子吸收法测定水中铊,对样品前处理的多个细节进行改进,使前处理过程耗时缩短,回收率提高。试验表明,方法在0μg/L ～50．0μg/L范围内线性良好,相关系数r为0．9995;检出限为2．0μg/L,取样量为500 mL,富集50倍时,方法检出限为0．04μg/L;实际水样测定结果的 RSD 为4．9％～8．4％;实际样品的加标回收率为94．0％～102％。     

火焰原子吸收光谱法测定畜禽粪便中铜和锌

采用冻干法-全量酸消解-火焰原子吸收光谱法测定畜禽粪便中铜和锌,优化了试验条件.铜和锌分别在0 mg/L～3.00 mg/L和0 mg/L～1.00 mg/L范围内线性良好,检出限分别为6 mg/kg和2 mg/kg(按取0.5 g试样消解定容至50 mL计算),粪便试样测定的RSD分别为1.3%和3.7%,加标回收率分别为104%和107%.     

强酸型离子交换纤维富集-火焰原子吸收测定水中痕量铜、铅、镉、镍

通过强酸型离子交换纤维柱,在同一水样中同时富集和洗脱了铜、铅、镉、镍,采用火焰原子吸收光谱法测定,并对富集条件及洗脱条件、干扰因素进行了探讨。该方法简便易行,回收率在96.1%~105.5%之间,测定的相对标准偏差小于5.0%。     

Determination of copper in biological samples by flame atomic absorption spectrometry after precipitation with Me-BTAP

A simple and sensitive method was developed for determination of trace copper by direct precipitation preconcentration and detection with Flame Atomic Absorption Spectrometry (FAAS). The reagent 2-[2'-(6-methyl-benzothiazolylazo)]-4-aminophenol (Me-BTAP) was used as precipitating agent. The experimental conditions for the quantitative precipitation of copper, such as pH, amount of reagents, temperature and the effect of diverse ions on the precipitation have been investigated. It was found that copper is quantitatively extracted (> or =95%) and the method provides a sensitivity enhancement of 40-fold for a 10 ml sample volume with a detection limit of 0.5 microg l(-1). The proposed method was successfully applied for the determination of trace copper in water, urine and biological samples.     

Determination of total chromium by flame atomic absorption spectrometry after coprecipitation by cerium (IV) hydroxide

A method for the preconcentration of the total chromium based on coprecipitation with cerium (IV) hydroxide is proposed for determination of chromium by flame atomic absorption spectrometry. Different factors including carrier element amount, pH, sample volume and matrix ion effects for the precipitation were examined. The detection limit of the total chromium (k = 3, N = 15) was 0.18 μg l⁻¹. The presented method was applied for the determination of chromium in the wastewater samples from Kayseri and Nigde Organized Industrial Region-Turkey and in drinking water from our laboratory, Kayseri with satisfactory results (relative standard deviations below 8%, recoveries 95%). The analytical results obtained by the proposed method for certified copper sample was in good agreement with the certified value.     

石墨炉原子吸收法测定水中硒

利用石墨炉原子吸收法,加入基体改进剂测定水中硒,并优化了测定条件。结果表明,本方法检出限低(0 85μg L),准确度高,精密度好。     

氢化物发生-原子荧光法测定环境水样中痕量锡

以醋酸 醋酸钠缓冲溶液为反应酸介质 ,应用氢化物发生 原子荧光法 (HG AFS)测定环境水样中痕量 Sn。该方法同 HCl为反应酸测 Sn方法相比 ,不仅扩大了酸浓度测定范围 ,某些阳离子干扰也降至最小或消除。其相对标准偏差(RSD)小于 3% ;回收率在 94 4 %～ 1 0 0 %之间 ;检测限为 0 76 μg L。     

Evaluation of metal contents of household detergent samples from Turkey by flame atomic absorption spectrometry

The concentrations of cadmium, copper, chromium, cobalt, iron, lead, manganese, nickel, and zinc in detergent samples from Kayseri, Turkey were determined by flame atomic absorption spectrometry. HClO₄ (10 mL)/HNO₃ (10 mL) mixture was used for the digestion of household detergent samples. The correctness of the analytical procedures was checked with standard addition–recovery tests in different detergent samples for the investigated metal ions. The concentration ranges of the elements in the detergent samples were found as 17.2–60.1, 11.1–40.1, 2.5–32.3, 8.1–10.5, 7.2–21.6, 9.8–17.9, 1.7–3.8, 12.5–22.5, and 2.0–5.8 μg/g for iron, manganese, zinc, copper, lead, cobalt, cadmium, nickel, and chromium, respectively. The values found in this work were compared with some other studies around the world conducted on detergent samples.     

流动注射--氢化物发生原子吸收法测定天然水中的丁基锡化合物

建立用流动注射--氢化物发生原子吸收法同时测定天然水中一丁基锡、二丁基锡、三丁基锡和四丁基锡化合物的方法.首先用NaBH4还原丁基锡化合物后冷凝富集、加热,氢化物根据沸点的不同依次解吸从而得到分离,由原子吸收法测定.本方法可测每升几十纳克(以锡计)的各种丁基锡化合物.     

Determination of traces of copper and zinc in honeys by the solid phase extraction pre-concentration followed by the flame atomic absorption spectrometry detection

A simple and fast solid phase extraction procedure was developed to pre-concentrate traces of Cu and Zn prior to their determination in honey samples by flame atomic absorption spectrometry. The sample preparation included dissolution of honey samples and the passage (at 20 ml/min) of resulting 10 % m/v solutions (100 ml) through Dowex 50W?×?8-400 resin beds in order to quantitatively retain Cu and Zn and separate them from the glucose and fructose matrix. Enriched Cu and Zn traces were recovered with 5.0 ml of a 3.0 mol/l HCl solution and quantified by flame atomic absorption spectrometry. The procedure proposed was used to analyze sixty nine commercially available and freshly ripened honey samples coming from the Lower Silesia region (Poland). It enabled to measure Cu and Zn within the range of 0.01–1.42 and 0.03–15.38 μg/g, respectively, with precision better than 4 %. Accuracy, assessed on the basis of the recovery test and the comparison of results with those obtained using wet digestion and inductively coupled plasma optical emission spectrometry, was ranged from ?4 % to +6 %. Detection limits of Cu and Zn achieved with this method were 5 and 7 ng/g, respectively.     

燃烧氧化-非分散红外吸收法测定废水中TOC

通过选择一定的仪器使用条件及样品预处理方法,利用燃烧氧化-非分散红外吸收法对生活污水、工业废水中TOC进行测定,方法的检出限为0.5mg/L,RSD为4.4%,加标回收率在91.0%～102%。本方法操作简单、快速,成本较低,灵敏度完全能满足废水中TOC项目的监测要求。