Project level analysis of special trade contractor fatalities using accident investigation reports

Introduction

Construction is among the most dangerous industries in the United States accounting for thousands of fatalities every year. Although there is data available on high risk work types and areas, the project-level detail is not readily available.

Method

This paper uses the accident investigation reports to categorize project types and presents project level analysis of 350 fatal accidents for special trade contractors.

Results

The results showed that Residential and Commercial projects lead the fatalities where Falls are observed as the leading cause. However, when the fatality causes and project categories are analyzed for each work type, the results showed different fatality cause proportions for each project type.

Impact on Industry

Project level analysis approach has a direct impact on identifying high risk work types and areas for special trade contractors by making it possible to focus the prevention and intervention efforts more accurately, while highlighting training and education needs.     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

Occupational fatalities due to electrocutions in the construction industry

Introduction

Occupational fatalities due to contact with electricity account for approximately 9% of all deaths in the construction industry and is the fourth leading cause of death in this industry.

Method

Differences in the proportions of electrocutions in the construction industry are significantly different from other industries based upon the age of the worker and the source of the electricity.

Results

This study found that, in the construction industry, the proportion of occupational fatalities due to contact with electric current is significantly higher for workers in the 16 to 19 years old age group. Contact with overhead power lines occurred more frequently with younger workers, while contact with electric wiring, transformers, and related equipment was found to occur more frequently with older workers. The proportion of fatalities due to this event was also found to account for a significantly greater proportion of fatalities in the construction industry overall.

Impact on industry

The proportions of electrocution fatalities in the construction industry were found to be significantly higher for younger workers when compared to all other industries. Focusing prevention measures toward younger workers who work near overhead power lines could have a significant impact upon death rates. For older workers, the focus should be on those who work on or near transformers, electrical wiring, and components. Across the construction industry, implementation of effective lockout-tagout programs, and verification of energy isolation, can prevent approximately 125 fatalities per year in the construction industry.     

Fatal crash trends for Australian young drivers 1997-2007: Geographic and socioeconomic differentials

Background

Little has been published on changes in young driver fatality rates over time. This paper examines differences in Australian young driver fatality rates over the last decade, examining important risk factors including place of residence and socioeconomic status (SES).

Methods

Young driver (17-25 years) police-recorded passenger vehicle crashes were extracted from New South Wales State records from 1997-2007. Rurality of residence and SES were classified into three levels based on drivers’ residential postcode: urban, regional, or rural; and high, moderate, or low SES areas. Geographic and SES disparities in trends of fatality rates were examined by the generalized linear model. Chi-square trend test was used to examine the distributions of posted speed limits, drinking driving, fatigue, seatbelt use, vehicle age, night-time driving, and the time from crash to death across rurality and socioeconomic status.

Results

Young driver fatality rate significantly decreased 5% per year (p < 0.05); however, stratified analyses (by rurality and by SES) showed that only the reduction among urban drivers was significant (average 5% decrease per year, p < 0.01). The higher relative risk of fatality for rural versus urban drivers, and for drivers of low versus high SES remained unchanged over the last decade. High posted speed limits, fatigue, drink driving and seatbelt non-use were significantly associated with rural fatalities, whereas high posted speed limit, fatigue, and driving an older vehicle were significantly related to low SES fatality.

Conclusion

The constant geographic and SES disparities in young driver fatality rates highlight safety inequities for those living in rural areas and those of low SES. Better targeted interventions are needed, including attention to behavioral risk factors and vehicle age.     

Differences in urban and rural accident characteristics and medical service utilization for traffic fatalities in less-motorized societies

Introduction

Fatalities from traffic accidents in less-motorized societies are an important global issue. We aimed to characterize the geographic differences of fatalities in such societies to facilitate the development of targeted interventions.

Method

This study linked police reports, hospital data, and vital registration data from Taiwan with special reference to accident factors in pre-hospital deaths and medical care in hospital deaths.

Results

A higher percentage of pre-hospital deaths were observed following rural as compared to urban traffic accidents. The deaths due to rural accidents can be attributed to lower use of restraints (i.e., helmets or seat belts), lower percentage of motorcyclists, and more highway accidents. A higher percentage of victims in rural accidents were transported to distant medical centers rather than to local hospitals.

Conclusion

Specific interventions, such as intelligent emergency medical systems, campaigns for helmets and seat belt usage, enforcement of helmets and seat belt use, and speed control measures should be targeted to rural areas.

Impact on industry

Cooperation between the vehicle industry and emergency medical providers in rural traffic accident rescue teams may decrease the numbers of deaths in these regions.     

Road safety in China: Analysis of current challenges

Introduction

China has the world's largest population, and is the second largest automobile market. China's economy is booming, resulting in a rapid increase in both the road infrastructure and access to private vehicles. Along with economic growth, the ownership of motorized vehicles has almost quadrupled in the past 10 years, from 42.2 million in 1997 to 159.7 million in 2007. However, at the same time, China also has a very high number of road fatalities compared to other countries, with about 100,000 reported fatalities each year.

Method

This study analyzes the Chinese road-fatality situation to identify areas in which the total harm caused by crashes can be substantially and readily reduced. It provides a comprehensive analysis of the current road-fatality situation in China using conventional indices and the likely future trends.

Results

Four areas were identified in which countermeasures have the most potential to substantially reduce fatalities in China: pedestrians and other non-motorists, nighttime driving, vehicle passengers, and motorcycles.

Conclusion

While China faces unprecedented road safety issues, this report identifies major areas in which there are opportunities to greatly reduce total harm.     

Survival risk factors for fatal injured car and motorcycle drivers in single alcohol-related and alcohol-unrelated vehicle crashes

Introduction

A high percentage of drivers who die as a result of a single vehicle crash are under the influence of alcohol. We aimed to better understand the prevalence of these fatalities and the ratio of death to injuries based on various risk factors. We focused on alcohol-related and -unrelated single-vehicle crashes to investigate the influence of such risk factors on the time until death for car and motorcycle drivers.

Methods

We combined data from national police reports and a vital registration database in Taiwan. Survival analysis using Cox regression models was used to identify the risk factors of time until death.

Results

Overall, nearly 60% of car driver fatalities and 40% of motorcycle driver fatalities involved the consumption of alcohol. Survival analysis of single-vehicle crashes suggested that the traffic island separation between a car moving at a higher speed and motorcycle traffic resulted in a higher risk of death over time for motorcycle drivers who consumed alcohol. The factors attributed to a higher risk of death over time for motorcycle drivers were older age, crashing into trees, night-time driving, driving on curved roads, and driving on local roads. Driving without restraints and driving on roads with higher speed limits attributed to a higher risk of death over time for car drivers.

Conclusions

The factors that influence the risk of death over time in a motor-vehicle accident involving alcohol depended on different elements, which should each be considered when attempting to reduce this risk.

Impact on Industry

More efforts should be made to investigate the various risk factors in areas with large motorcycle populations.     

When may road fatalities start to decrease?

Introduction

The comparative analysis of macroscopic trends in road safety has been a popular research topic. The objective of this research is to propose a simple and, at the same time, reliable multiple regime model framework for international road safety comparisons, allowing for the identification of slope changes of personal risk curves and respective breakpoints.

Method

The trends of road traffic fatalities in several EU countries have been examined through the temporal evolution of elementary socioeconomic indicators, namely motorized vehicle fleet and population, at the country level.

Results

Piece-wise linear regression models have been fitted, using a methodology that allows the simultaneous estimation of all slopes and breakpoints. The number and location of breakpoints, as well as the slope of the connecting trends, vary among countries, thus indicating different road safety evolution patterns.

Impact on industry

Macroscopic analysis of road accident trends may be proved beneficial for the identification of best examples and the implementation of appropriate programmes and measures, which will lead to important benefits for the society and the economy through the reduction of road fatalities and injuries. Best performing countries and the related programmes and measures adopted may concern several safety improvements at the processes of the road, the vehicle and the insurance industries.

Conclusions

Lessons from the analysis of the past road safety patterns of developed countries provide some insight into the underlying process that relates motorization levels with personal risk and can prove to be beneficial for predicting the road safety evolution of developing countries that may have not yet reached the same breakpoints. Furthermore, the presented framework may serve as a basis to build more elaborate models, including more reliable exposure indicators (such as vehicle-km driven).     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

The impact of a standard enforcement safety belt law on fatalities and hospital charges in Ohio

Introduction

The purpose of this study was to analyze linked crash and hospital data to determine the effect that enactment of a standard enforcement safety belt law in Ohio would have on hospital charges and direct medical costs due to motor-vehicle crashes, focusing on the impact to the state's Medicaid system.

Method

The linkage and analysis was conducted as part of the Ohio Crash Outcome Data Evaluation System (CODES) program. Current safety belt usage in Ohio stands at 82% with its secondary enforcement safety belt law.

Results

Assuming an increase in usage to 92% through standard enforcement, over $15.3 million in medical costs to Medicaid for injuries that occur in a single year could be prevented over a 10-year period. Cumulative savings could reach more than $91.2 million during the 10-year period. In addition, 161 fatalities could have been prevented in one year had all unbelted occupants who sustained a fatal injury instead chosen to wear their safety belt.

Summary and Impact on Industry

Clearly, substantial progress can be made in reducing the number of deaths and injuries, as well as medical costs associated with motor-vehicle crashes, by strengthening safety belt laws and increasing safety belt usage in Ohio.     

What vehicle features are considered important when buying an automobile? An examination of driver preferences by age and gender

Introduction

Certain vehicle features can help drivers avoid collisions and/or protect occupants in the event of a crash, and therefore, might play an important role when deciding which vehicle to purchase. The objective of this study was to examine the importance attributed to key vehicle features (including safety) that drivers consider when buying a car and its association with age and gender.

Methods

A sample of 2,002 Canadian drivers aged 18 years and older completed a survey that asked them to rank the importance of eight vehicle features if they were to purchase a vehicle (storage, mileage, safety, price, comfort, performance, design, and reliability). ANOVA tests were performed to: (a) determine if there were differences in the level of importance between features and; (b) examine the effect of age and gender on the importance attributed to these features.

Results

Of the features examined, safety and reliability were the most highly rated in terms of importance, whereas design and performance had the lowest rating. Differences in safety and performance across age groups were dependent on gender. This effect was most evident in the youngest and oldest age groups.

Conclusions

Safety and reliability were considered the most important features. Age and gender play a significant role in explaining the importance of certain features.

Impact on Industry

Targeted efforts for translating safety-related information to the youngest and oldest consumers should be emphasized due to their high collision, injury, and fatality rates.     

An ethnography of low-income mothers' safeguarding efforts

Problem

Children living in lower-income environments are at greater risk for unintentional injuries. However, little is known about the safety practices of mothers living in low-income situations.

Method

This ethnographic study explored the child safeguarding experiences of low-income mothers using in-home interviews and observations.

Results

Mothers' safeguarding efforts included cognitive and emotional work, child directed work, and work directed at the physical and social environments. Factors that influenced the women's safeguarding included the quality of the indoor space, availability of safe play space, traffic hazards, sibling interactions, child care supports, relationships with neighbors, and trust in community services.

Discussion

These findings have implications for the conceptualization of safeguarding practices and provide insight about the experiences of mothers living on low-incomes.

Impact on Industry

When developing safety interventions, program planners should consider the views and practices of mothers as well as contextual factors in the physical and social environments.     

Have government regulations improved workplace safety? : A test of the asynchronous regulatory effects in China's coal industry, 1995-2006

Problem

Empirical studies on the effectiveness of workplace safety regulations are inconclusive. This study hypothesizes that the asynchronous effects of safety regulations occur because regulations need time to become effective. Safety regulations will work initially by reducing the most serious accidents, and later by improving overall safety performance.

Method

The hypothesis is tested by studying a provincial level aggregate panel dataset for China's coal industry using two different models with different sets of dependent variables: a fixed-effects model on mortality rate, which is defined as fatalities per 1,000 employees; and a negative binominal model on the annual number (frequency) of disastrous accidents.

Results

Safety regulations can reduce the frequency of disastrous accidents, but have not reduced mortality rate, which represents overall safety performance.

Discussion and summary

Policy recommendations are made, including shifting production from small to large mines through industrial consolidation, improving the safety performance of large mines, addressing consequences of decentralization, and facilitating the implementation of regulations through carrying on institutional actions and supporting legislation.

Impact on industry

Until recently, about 4,000 coal miners perished annually in China, demonstrating that workplace safety in China's coal industry is an urgent and important issue. This research provides evidence that safety regulations have asynchronous effects and identifies the priorities in improving safety in China's current coal mining. This may assist the Chinese government to design more effective safety improvement policies and improve the effectiveness of safety regulations and safety performance.     

"The little squealer" or "the virtual guardian angel"? Young drivers' and their parents' perspective on using a driver monitoring technology and its implications for parent-young driver communication

Introduction

In-vehicle driving monitoring technologies have the potential to enable young drivers to learn from self-assessment. However, their use is largely dependent on parental involvement.

Method

A total of 79 interviews were conducted with young drivers and parents regarding this technology and its use. Most had the experience of having an in-vehicle data recorder installed in the vehicle driven by the young drivers. Parents and the young drivers expressed both appreciation as well as reservations about its potential as a means to enhance the driving safety of young drivers.

Results

A surprising finding was that some parents did not check the feedback and said they relied on the young driver to do so. Main concerns related to privacy, parent-young driver relationship, self-esteem and confidence, constructive use of the feedback data, and the limitations of the documentation that can be done by the technology.

Conclusions

Providing parents and young drivers with a support system and tools to discuss and utilize the feedback are underscored. Challenges include addressing the invasion of young drivers’ privacy and gender differences, and using the monitoring-capacity of the technology to enhance safe driving practices. Implications for programs to enhance communication and a dialogical approach between parents and young drivers are discussed.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Re-education of young driving offenders; Effects on self-reports of driver behavior

Introduction

Offending drivers are often re-educated, but these courses have seldom been shown to have any safety effects.

Method

An on-line improvement course for offending drivers below the age of 25 was evaluated with several driver inventories.

Results

The drivers reported higher levels of aggression, stress, sensation seeking, drunk driving, and driving violations, six months after the course than before. However, these levels were lower than those of controls, indicating that the initially low levels for the education group were due to socially desirable responding, as measured by a lie scale, an effect that waned after the course.

Discussion

The results can be interpreted as a positive effect of the education, although this conclusion is tentative and not in agreement with all effects in the data.

Impact on industry

The results are in disagreement with previous evaluation studies using the same or similar instruments, and show the need to include controls for social desirability in self-report studies.     

Predicting driver drowsiness using vehicle measures: Recent insights and future challenges

Introduction

Driver drowsiness is a significant contributing factor to road crashes. One approach to tackling this issue is to develop technological countermeasures for detecting driver drowsiness, so that a driver can be warned before a crash occurs.

Method

The goal of this review is to assess, given the current state of knowledge, whether vehicle measures can be used to reliably predict drowsiness in real time.

Results

Several behavioral experiments have shown that drowsiness can have a serious impact on driving performance in controlled, experimental settings. However, most of those studies have investigated simple functions of performance (such as standard deviation of lane position) and results are often reported as averages across drivers, and across time.

Conclusions

Further research is necessary to examine more complex functions, as well as individual differences between drivers.

Impact on Industry

A successful countermeasure for predicting driver drowsiness will probably require the setting of multiple criteria, and the use of multiple measures.     

Attitudes toward a primary seat belt law among adults in a rural state with a secondary seat belt law

Problem

Enforced primary seatbelt laws can reduce morbidity and mortality associated with motor-vehicle crashes. Constituent support is an important factor associated with legislator voting behavior toward injury prevention laws. Little is known about attitudes toward a primary seat belt law among adults in rural states without a primary seat belt law.

Methods

Data from the Behavioral Risk Factor Surveillance System (BRFSS) survey, a telephone survey of a representative sample of adults in Montana, were used to assess attitudes toward a primary seat belt law.

Results

Sixty-one percent of respondents supported a primary seat belt law. Using multiple logistic regression analyses, women (AOR 1.87; 95% CI 1.49-2.36), persons aged 65 years and older (1.45; 1.06-1.96), American Indians (2.71; 1.55-4.75), those with health insurance (1.51; 1.07-2.14), and those who reported always wearing their seat belt (4.05; 3.14-5.21) were more likely to support a primary seat belt law than respondents without these characteristics.

Conclusions

The majority of adults in a rural state support a primary seat belt law.     

Does the built environment affect when American teens become drivers? Evidence from the 2001 National Household Travel Survey

Problem

Motor vehicle crashes are the most common cause of death for American adolescents. However, the impact of where teens live on when they begin driving has not been studied.

Method

Data from the 2001 National Household Travel Survey were used to estimate the effect of residential density on the driver status of teens aged 16 to 19 years after matching on demographic characteristics.

Results

Controlling for demographic characteristics, 16 and 17 year old teens in high density neighborhoods had driver rates 15 percentage points below teens living in less dense areas (p < 0.001). The effect for 18 and 19 year olds was a 9 percentage point decrease (p < 0.001).

Summary

These results suggest teens living in less dense and more sprawling communities initiate driving at a younger age than comparable teens in compact areas, placing them at increased risk for crash related injuries. Impact on Industry: The role of environmental factors, such as neighborhood walkability and provision of transit, should be considered in young driver programs.