共查询到20条相似文献,搜索用时 15 毫秒
1.
In Russia in 1950–1960 solutions for the localization and storage of large volumes of liquid radioactive waste produced during defensive tasks were accomplished using natural and man-made water objects. At present, they are non-isolated from the environment and radioactive waste storage facilities constitute a serious potential menace. These objects are not allowed by the current legislation of the Russian Federation on environmental protection and safety. However, they do exist and there are no definite and approved engineering solutions regarding their removal. One of these objects is the Techa Cascade of Reservoirs (TCR) of the Mayak plant. In this article, TCR protection requirements are based on and formalized taking into account the legislation of the Russian Federation and the biospheric approach to the radiation protection of humans and the environment. Special safety requirements are needed because the standard argument “from human exposure to discharge standards” is invalid owing to the fact that the possibility of using water objects that have had contact with the TCR is restricted by law. 相似文献
2.
This study investigates the feasibility of using recycled high density polyethylene (rHDPE), polypropylene (rPP) and old newspaper (rONP) fiber to manufacture experimental composite panels. The panels were made through air-forming and hot press. The effects of the fiber and coupling agent concentration on tensile, flexural, internal bond properties and water absorption and thickness swelling of wood–fiber plastic composites were studied. The use of maleated polypropylene as coupling agent improved the compatibility between the fiber and both plastic matrices and mechanical properties of the resultant composites compared well with those of non-coupled ones. Based on the findings in this work, it appears that recycled materials can be used to manufacture value-added panels without having any significant adverse influence on board properties. It was also found that composites with rHDPE provided moderately superior properties, compared with rPP samples. 相似文献
3.
Ribeiro Bruno Yamamoto Takashi Yamashiki Yosuke 《Journal of Material Cycles and Waste Management》2021,23(3):1219-1226
Journal of Material Cycles and Waste Management - The use of agro-residue in resource-limited regions can be a smart way for civil construction to reduce costs, reduce emissions of pollutant gases... 相似文献
4.
The aim of the present study is to study the effect of γ-dose rate on the biodegradation of γ-sterilized polyolefins. Films
of isotactic polypropylene, high density polyethylene and ethylene-propylene (EP) copolymer were sterilized under γ-radiation
with doses of 10 and 25 kGy. Two different 60Co sources were used with dose rate 600 and 780 Gy h−1. Neat and sterilized samples were incubated in compost and fungal culture environments. The changes in functional groups,
surface morphology and intrinsic viscosity in polymer chains were characterized by FT-IR spectroscopy, SEM and viscometric
measurements, respectively. It was observed that both γ-degradation and biodegradation processes depend on the dose rate of
γ-source. It was found that the biodegradation of γ-sterilized polyolefins in composting and microbial culture environments
increased with decreasing the γ-dose rate. 相似文献
5.
Ghavidel Akbar Naji Rad Sumayyah Alikhani Hosein Ali Sharari Meraj Ghanbari Alireza 《Journal of Material Cycles and Waste Management》2018,20(2):1179-1187
Journal of Material Cycles and Waste Management - The bioleaching process comprises two mechanisms: direct action of the bacteria and indirect effect of low pH. In this work, the effect of bacteria... 相似文献
6.
《Waste management & research》1987,5(3):347-354
In the Federal Republic of Germany a working party has developed recommendations for dealing with the dioxin problems posed by waste incineration. According to these recommendations limit values for dioxin emissions are neither necessary nor practical. However, from the point of view of preventive environmental protection, dioxin emissions should be further reduced as far as is possible with present-day technology. The TA Luft (Technical Instructions for Maintaining Air Quality) contains stipulations and advice on this. The most significant of the solid residues from waste incinerators are the filter ashes as they have a high dioxin content. The working party of Under (states) has compiled a catalogue of recommendations for the disposal of filter ashes. The transport of solid residues from solid waste incinerators is controlled under the Abfallgesetz (Waste Act) and regulations passed in connection with this act and under the Gefahrgutverordnung Strasse—GGVS (Regulation on the transport of dangerous freight by road). The latter stipulates at what level of dioxin certain transport conditions must be respected. The new Gefahrstoffverordnung-GefStoffV (Regulation on dangerous substances) prohibits substances containing dioxin in concentrations above a certain level from being placed on the market. It does not apply to residues from solid waste incinerators. 相似文献
7.
P.-Y. Mahieux J.-E. Aubert M. Cyr M. Coutand B. Husson 《Waste management (New York, N.Y.)》2010,30(3):378-388
The objective of the work presented in this paper is the quantitative determination of the mineral composition of two complex mineral wastes: a sewage sludge ash (SSA) and a municipal solid waste incineration fly ash (MSWIFA). The mineral compositions were determined by two different methods: the first based on calculation using the qualitative mineralogical composition of the waste combined with physicochemical analyses; the second the Rietveld method, which uses only X-ray diffraction patterns. The results obtained are coherent, showing that it is possible to quantify the mineral compositions of complex mineral waste with such methods.The apparent simplicity of the Rietveld method (due principally to the availability of software packages implementing the method) facilitates its use. However, care should be taken since the crystal structure analysis based on powder diffraction data needs experience and a thorough understanding of crystallography. So the use of another, complementary, method such as the first one used in this study, may sometimes be needed to confirm the results. 相似文献
8.
Biogas or landfill gas can be converted to a high-grade gas rich in methane with the use of municipal solid waste incineration bottom ash as a reactant for fixation of CO2 and H2S. In order to verify results previously obtained at a laboratory scale with 65–90 kg of bottom ash (BA), several test runs were performed at a pilot scale, using 500–1000 kg of bottom ash and up to 9.2 N m3/h real landfill gas from a landfill in the Tuscany region (Italy). The input flow rate was altered. The best process performance was observed at a input flow rate of 3.7 N m3/(h tBA). At this flow rate, the removal efficiencies for H2S were approximately 99.5–99%. 相似文献
9.
10.
There is increasing concern about landfilling of biodegradable wastes. Therefore, biological treatment processes such as composting and biogasification have been considered as alternative strategies for managing those wastes. In this work, life cycle assessment was employed to compare the environmental impacts of landfilling, composting, and biological treatment of municipal solid waste in S?o Paulo City, Brazil. Energy consumption, recovered resources, and emissions to air and water were quantified and analyzed in terms of their potential contribution to global warming, acidification, and nutrient enrichment impact. The results demonstrated that processes that require high levels of energy consumption, such as wastewater treatment, play an important role in the outcome of environmental impact potentials. It was found that the landfilling of all waste is generally the worst strategy from an environmental point of view. However, significant reductions in the resulting impacts can be accomplished through biogasification and composting of the biodegradable fraction. Regarding composting, the application of a biofilter for gas treatment reduced significantly the gaseous emissions. 相似文献
11.
Rasmus Renstad Sigbritt Karlsson Åsa Sandgren Ann-Christine Albertsson 《Journal of Polymers and the Environment》1998,6(4):209-221
Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO3, SiO2, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO2 to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO3 to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO2 exhibited the fastest (bio)degradation, followed by PLA with CaCO3. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization. 相似文献
12.
Lindberg S. E. Brooks S. Lin C-J. Scott K. Meyers T. Chambers L. Landis M. Stevens R. 《Water, Air, & Soil Pollution: Focus》2001,1(5-6):295-302
We have measured total gaseous mercury concentrations(Hg°) at Point Barrow, Alaska since September 1998 in aneffort to determine the geographic extent and reaction mechanismof the so-called mercury depletion events (MDE) previouslyreported in the high Arctic at Alert, Canada. Hg° has beensampled now for nearly 2 years at Barrow. In September, 1999, webegan making the first automated measurements of reactive gaseousmercury (RGM) attempted in the Arctic, along with measurements ofHg accumulation in snowpack to determine the fate of the depleted Hg°. During the fall and early winter, Hg°and RGM exhibit only minor variation, Hg° remaining within10% of global background, near 1.6–1.8 ng m-3. The MDEperiods are quite different, however; within days of Arcticsunrise in January, Hg° exhibits major variations from themean, rapidly dropping as low as 0.05 ng m-3 and then cyclingback to typical levels, sometimes exceeding global background. These events continue throughout Arctic spring, then end abruptlyfollowing snowmelt, in early June. Prior to Arctic sunrise, RGMremains near detection (<2 pg m-3), but after sunriseincreases dramatically (to levels as high as 900 pg/m3) insynchrony with the depletion of Hg°. Both phenomenaexhibit a strong diel cycle, in parallel with UV-B. We concludethat MDE's involve rapid in-air oxidation of Hg° to aspecies of RGM by photochemically-driven reactions, probablyinvolving the same reactive bromine and chlorine compoundsinvolved in ozone destruction. Sharp increases in Hg in thesurface snowpack after sunrise coincident with periods of peakRGM suggest surface accumulation of the RGM by dry deposition. 相似文献
13.
A study of the second step or methanogenic stage of a two-stage anaerobic digestion process treating two-phase olive oil mill solid residue (OMSR) was conducted at mesophilic temperature (35 °C). The substrate fed to the methanogenic step was the effluent from a hydrolytic–acidogenic reactor operating at an organic loading rate (OLR) of 12.9 g chemical oxygen demand (COD) L?1 d?1 and at a hydraulic retention time (HRT) of 12.4 days; these OLR and HRT were found to be the best values to achieve the maximum total volatile fatty acid concentration (14.5 g L?1 expressed as acetic acid) with a high concentration in acetic acid (57.5% of the total concentration) as the principal precursor of methane. The methanogenic stage was carried out in an anaerobic stirred tank reactor containing saponite as support media for the immobilization of microorganisms. OLRs of between 0.8 and 22.0 g COD L?1 d?1 were studied. These OLRs corresponded to HRTs of between 142.9 and 4.6 days. The methanogenic reactor operated with high stability for OLRs lower than 20.0 g COD L?1 d?1. This behaviour was shown by the total volatile fatty acids/total alkalinity ratio, whose values were always kept ?0.12 for HRTs > 4.6 days. The total COD (T-COD) removed was in the range of 94.3–61.3% and the volatile solids (VS) removed between 92.8% and 56.1% for OLRs between 0.8 and 20.0 g COD L?1 d?1. In the same way, a reduction of 43.8% was achieved for phenolic content. The low concentration of total volatile fatty acids (TVFA) observed (below 1 g L?1 expressed as CH3COOH) in the methanogenic reactor effluents showed the high percentage of consumption and conversion of these acids to methane. A methane yield of 0.268 ± 0.003 L CH4 at standard temperature and pressure conditions (STP) g?1 COD eliminated was achieved. 相似文献
14.
Graft copolymers of starch and polyacrylamide (PAAm) were prepared using reactive extrusion in a corotating twin screw extruder.
The effect of cationic starch modification was examined using unmodified and cationic dent starch (≈23% amylose) and waxy
maize starch (≈2% amylose). For a fixed acrylamide/starch feed ratio, conversion, graft content, and grafting efficiency were
essentially unaffected by starch type or modification. Cationic starch graft copolymers generally had lower molecular weight
PAAm grafts compared to the unmodified starch, whereas amylose content had little or no significant effect. In addition, the
frequency of grafting was higher with cationic starch. These results indicate that cationic modification of starch enhances
formation of grafting sites, resulting in graft copolymers with more grafts of lower molecular compared to unmodified starch.
Cationic modification may therefore be a way to tailor the properties of starch–PAAm graft copolymers. 相似文献
15.
Emo Chiellini Andrea Corti Arianna Giovannini Piero Narducci Anna M. Paparella Roberto Solaro 《Journal of Polymers and the Environment》1996,4(1):37-50
The results of an investigation aimed at evaluation of the biodegradability of blends of poly(-caprolactone) (PCL) with poly(ethylene terephthalate) (PET) as the major component are reported. Specimens of the blends, as melt extruded films and/or powders, were submitted to degradation tests under different environmental conditions including full-scale composting, soil burial, bench-scale accelerated aerobic degradation, and exposure to axenic cultures and esterolytic enzymes. Indications have been gained that blending in the melt gives rise to insertion of PCL segments in the PET chain. Copolymers thus attained acted as macromolecular compatibilizers, allowing for a complete miscibility of PCL and PET. The biodegradation detected on the blend samples was, however, well below the values expected from chemical composition and behavior of individual homopolymers under the same environmental conditions. The presence of PET as the major component in PET/PCL blends apparently reduces the propensity of PCL to be degraded, at least in the investigated composition range. The degradation data collected under different environmental conditions indicate that the full-scale composting system is the most efficient among the tested degradation procedures. 相似文献
16.
Twenty-five comparative cycle assessments (LCAs) addressing food waste treatment were reviewed, including the treatment alternatives landfill, thermal treatment, compost (small and large scale) and anaerobic digestion. The global warming potential related to these treatment alternatives varies largely amongst the studies. Large differences in relation to setting of system boundaries, methodological choices and variations in used input data were seen between the studies. Also, a number of internal contradictions were identified, many times resulting in biased comparisons between alternatives. Thus, noticed differences in global warming potential are not found to be a result of actual differences in the environmental impacts from studied systems, but rather to differences in the performance of the study. A number of key issues with high impact on the overall global warming potential from different treatment alternatives for food waste were identified through the use of one-way sensitivity analyses in relation to a previously performed LCA of food waste management. Assumptions related to characteristics in treated waste, losses and emissions of carbon, nutrients and other compounds during the collection, storage and pretreatment, potential energy recovery through combustion, emissions from composting, emissions from storage and land use of bio-fertilizers and chemical fertilizers and eco-profiles of substituted goods were all identified as highly relevant for the outcomes of this type of comparisons. As the use of LCA in this area is likely to increase in coming years, it is highly relevant to establish more detailed guidelines within this field in order to increase both the general quality in assessments as well as the potentials for cross-study comparisons. 相似文献
17.
How are WEEE doing? A global review of the management of electrical and electronic wastes 总被引:4,自引:0,他引:4
This paper presents and critically analyses the current waste electrical and electronic equipment (WEEE) management practices in various countries and regions. Global trends in (i) the quantities and composition of WEEE; and (ii) the various strategies and practices adopted by selected countries to handle, regulate and prevent WEEE are comprehensively examined. The findings indicate that for (i), the quantities of WEEE generated are high and/or on the increase. IT and telecommunications equipment seem to be the dominant WEEE being generated, at least in terms of numbers, in Africa, in the poorer regions of Asia and in Latin/South America. However, the paper contends that the reported figures on quantities of WEEE generated may be grossly underestimated. For (ii), with the notable exception of Europe, many countries seem to be lacking or are slow in initiating, drafting and adopting WEEE regulations. Handling of WEEE in developing countries is typified by high rate of repair and reuse within a largely informal recycling sector. In both developed and developing nations, the landfilling of WEEE is still a concern. It has been established that stockpiling of unwanted electrical and electronic products is common in both the USA and less developed economies. The paper also identifies and discusses four common priority areas for WEEE across the globe, namely: (i) resource depletion; (ii) ethical concerns; (iii) health and environmental issues; and (iv) WEEE takeback strategies. Further, the paper discusses the future perspectives on WEEE generation, treatment, prevention and regulation. Four key conclusions are drawn from this review: global amounts of WEEE will continue unabated for some time due to emergence of new technologies and affordable electronics; informal recycling in developing nations has the potential of making a valuable contribution if their operations can be changed with strict safety standards as a priority; the pace of initiating and enacting WEEE specific legislation is very slow across the globe and in some cases non-existent; and globally, there is need for more accurate and current data on amounts and types of WEEE generated. 相似文献
18.
《Spill Science & Technology Bulletin》1996,3(4):259-262
Young rainbow trout were exposed to Norman Wells crude oil for periods as long as 55 d. Mortality was light for the first few days, but it continued throughout exposure with more rapid and increased mortality at the higher exposure levels. The mortality was generally exacerbated by the presence of oil dispersants Corexit 7664 or 9600. Fish surviving the 55-day experiment showed severe fin erosion and apparent ‘flooding’, since mean body water content was increased from about 84% to over 90%. We hypothesize that the oil affected the ability of the fish to regulate their water content. 相似文献
19.
K. Komemoto Y.G. Lim N. Nagao Y. Onoue C. Niwa T. Toda 《Waste management (New York, N.Y.)》2009,29(12):2950-2955
The effectiveness of methane fermentation treatment used in food waste processing is currently limited by solubilization and acidogenesis. In efforts to improve the treatment process, this study examined the effects of temperature on solubilization and acidogenesis. The solubilization rate of food waste, which was based on suspended solid removal, was 47.5%, 62.2%, 70.0%, 72.7%, 56.1% and 45.9% at 15 °C, 25 °C, 35 °C, 45 °C, 55 °C and 65 °C, respectively. Solubilization rate was accelerated from the middle to late experimental periods under mesophilic (35 °C and 45 °C) conditions. In contrast, overall solubilization rate was significantly lower under thermophilic (55 °C and 65 °C) conditions than under mesophilic conditions, although solubilization occurred rapidly in the early experimental period. The production of biogas was high under mesophilic conditions of 35 °C and 45 °C, at 64.7 and 62.7 mL/g-VS, respectively, while it was scarce under thermophilic conditions. Solubilization of food waste was accelerated under both mesophilic and thermophilic conditions; however, solubilization rate was observed to be particularly high under mesophilic conditions, and a shortening of the hydraulic retention time is expected under thermophilic conditions. 相似文献
20.
Matheus D. Slongo Suelen D. F. Brandolt Tales S. Daitx Raquel S. Mauler Marcelo Giovanela Janaina S. Crespo Larissa N. Carli 《Journal of Polymers and the Environment》2018,26(6):2290-2299
The aim of this work was to evaluate the effect of different plasticizers on the morphology, crystallization, and mechanical properties of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)/organomodified montmorillonite (OMt) nanocomposites. We investigated three different plasticizers: dioctyl phthalate (DOP), a commonly used additive in the polymer industry, and two natural and biodegradable plasticizers: epoxidized soybean oil (ESO) and triethyl citrate (TEC). The nanocomposites with 3 wt% OMt were obtained by melt processing in an internal mixer. The plasticizers were used alone or in combination with clay in a concentration of 10 wt%. X-ray diffraction and scanning electron microscopy results revealed a partially intercalated structure. The degree of crystallinity was higher for all of the samples compared to neat PHBV, although the melting temperature decreased with the use of plasticizers combined with OMt. The impact strength results were dependent on the interaction between the components of the system. Triethyl citrate was the most effective plasticizer due to its more pronounced interaction with the PHBV matrix, which yielded improvements in processing conditions and PHBV’s flexibility and impact properties. 相似文献