Highly effective visible-photocatalytic hydrogen evolution and simultaneous organic pollutant degradation over an urchin-like oxygen-doped MoS2/ZnIn2S4 composite

● An urchin-like OMS/ZIS composite was fabricated by a facile solvothermal method. ● The OMS/ZIS exhibits superior photocatalytic H₂ evolution for organics degradation. ● A probable mechanism of dual-functional photocatalysis was proposed in detail. ● This work provides an inspiration for rational design of dual-functional catalysts. Achieving hydrogen production and simultaneous decomposition of organic pollutants through dual-functional photocatalytic reactions has received increasing attention due to the environmentally friendly and cost-effective characteristics of this approach. In this work, an urchin-like oxygen-doped MoS₂/ZnIn₂S₄ (OMS/ZIS) composite was fabricated for the first time using a simple solvothermal method. The unique microstructure with abundant active sites and fast charge transfer channels further shortened the charge migration distance and compressed carrier recombination. The obtained composite exhibited an efficient H₂ evolution reaction rate of 12.8 mmol/g/h under visible light, which was nearly times higher than pristine ZnIn₂S₄, and the apparent quantum efficiency was 14.9% (420 nm). The results of the simultaneous photocatalytic H₂ evolution and organic pollutant decomposition test were satisfactory, resulting in decomposition efficiencies of resorcinol, tetracycline, and bisphenol A that reached 41.5%, 63.5%, and 53.0% after 4 h, respectively, and the highest H₂ evolution rate was 672.7 μmol/g/h for bisphenol A. Furthermore, natural organic matter (NOM) abundantly found in actual water was adopted as an electron donor for H production under simulated sunlight irradiation, indicating the promising practicability of simultaneous hydrogen evolution and NOM decomposition. Moreover, the mechanisms of the dual-purpose photocatalytic reactions, as well as the synergistic effect between the molecular structures of the organic pollutants and the corresponding adsorption behavior on the photocatalyst surface were illustrated in detail. These obtained results may serve as an inspiration for the rational design of highly efficient, dual-functional photocatalysts in the future.     

Simultaneous removal of NOx and chlorobenzene on V2O5/TiO2 granular catalyst: Kinetic study and performance prediction

• A V₂O₅/TiO₂ granular catalyst for simultaneous removal of NO and chlorobenzene. • Catalyst synthesized by vanadyl acetylacetonate showed good activity and stability. • The kinetic model was established and the synergetic activity was predicted. • Both chlorobenzene oxidation and SCR of NO follow pseudo-first-order kinetics. • The work is of much value to design of multi-pollutants emission control system. The synergetic abatement of multi-pollutants is one of the development trends of flue gas pollution control technology, which is still in the initial stage and facing many challenges. We developed a V₂O₅/TiO₂ granular catalyst and established the kinetic model for the simultaneous removal of NO and chlorobenzene (i.e., an important precursor of dioxins). The granular catalyst synthesized using vanadyl acetylacetonate precursor showed good synergistic catalytic performance and stability. Although the SCR reaction of NO and the oxidation reaction of chlorobenzene mutually inhibited, the reaction order of each reaction was not considerably affected, and the pseudo-first-order reaction kinetics was still followed. The performance prediction of this work is of much value to the understanding and reasonable design of a catalytic system for multi-pollutants (i.e., NO and dioxins) emission control.     

g-C3N4/RGO的制备、光催化降解性能及其降解机理

尿素固相反应得到石墨相氮化碳(g-C₃N₄),石墨(G)被氧化制得氧化石墨(GO),GO被还原制得石墨烯(RGO),通过3种复合方法分别制得g-C₃N₄/RGO材料.通过对污染物亚甲基蓝、罗丹明B和甲基橙的降解,考察了g-C₃N₄与GO不同复合比9.7:1、9.3:1、9:1、8:1和6.7:1对光催化剂g-C₃N₄/RGO光催化性能的影响.同时考察了复合物对污染物的选择性降解.用X-射线衍射谱(XRD)和傅里叶变换红外光谱(FT-IR)对催化剂的结构性质进行了表征.结果表明,g-C₃N₄与GO混合-水合肼还原-高温固相反应法制备的g-C₃N₄/RGO,时间最短,产量较高,对罗丹明B的降解效果最佳,说明该方法较好.另外,当g-C₃N₄与GO的质量比为9.7:1时,制备的g-C₃N₄/RGO降解效果最佳.还有,该复合材料对亚甲基蓝的降解效果最佳,罗丹明B次之,甲基橙最差.机理研究结果表明超氧自由基在光催化过程中起主导作用,羟基自由基起次要作用.     

Fabrication of highly efficient Bi2WO6/CuS composite for visible-light photocatalytic removal of organic pollutants and Cr(VI) from wastewater

• A novel Bi₂WO₆/CuS composite was fabricated by a facile solvothermal method. • This composite efficiently removed organic pollutants and Cr(VI) by photocatalysis. • The DOM could promoted synchronous removal of organic pollutants and Cr(VI). • This composite could be applied at a wide pH range in photocatalytic reactions. • Possible photocatalytic mechanisms of organic pollutants and Cr(VI) were proposed. A visible-light-driven Bi₂WO₆/CuS p-n heterojunction was fabricated using an easy solvothermal method. The Bi₂WO₆/CuS exhibited high photocatalytic activity in a mixed system containing rhodamine B (RhB), tetracycline hydrochloride (TCH), and Cr (VI) under natural conditions. Approximately 98.8% of the RhB (10 mg/L), 87.6% of the TCH (10 mg/L) and 95.1% of the Cr(VI) (15 mg/L) were simultaneously removed from a mixed solution within 105 min. The removal efficiencies of TCH and Cr(VI) increased by 12.9% and 20.4%, respectively, in the mixed solution, compared with the single solutions. This is mainly ascribed to the simultaneous consumption electrons and holes, which increases the amount of excited electrons/holes and enhances the separation efficiency of photogenerated electrons and holes. Bi₂WO₆/CuS can be applied over a wide pH range (2–6) with strong photocatalytic activity for RhB, TCH and Cr(VI). Coexisiting dissolved organic matter in the solution significantly promoted the removal of TCH (from 74.7% to 87.2%) and Cr(VI) (from 75.7% to 99.9%) because it accelerated the separation of electrons and holes by consuming holes as an electron acceptor. Removal mechanisms of RhB, TCH, and Cr(VI) were proposed, Bi₂WO₆/CuS was formed into a p-n heterojunction to efficiently separate and transfer photoelectrons and holes so as to drive photocatalytic reactions. Specifically, when reducing pollutants (e.g., TCH) and oxidizing pollutants (e.g., Cr(VI)) coexist in wastewater, the p-n heterojunction in Bi₂WO₆/CuS acts as a “bridge” to shorten the electron transport and thus simultaneously increase the removal efficiencies of both types of pollutants.     

碘铈共掺杂纳米TiO_2的制备及可见光光催化性能

采用溶胶凝胶法制备了不同原料比例碘铈共掺杂纳米TiO2催化剂,运用X射线光电子能谱（XPS）,X射线衍射（XRD）,透射电镜（TEM）等检测手段对催化剂进行了初步表征.结果表明,经过450℃煅烧处理得到的TiO2、铈掺杂TiO2以及碘铈共掺杂TiO2催化剂均为锐钛矿相,掺杂的Ce和I原子可能以I—Ce—O及O—Ti—I等键合方式进入TiO2晶格内部,此外,I-Ce离子共掺杂能有效降低TiO2表面的电子-空穴对的复合.以染料罗丹明B（Rhodamine B,RhB）和无色小分子水杨酸（Salicylic acid,SA）为降解的目标化合物,发现碘铈共掺杂的最佳物质的量之比为nCe∶nI∶nTi=0.04∶0.05∶1,即I0.05Ce0.04TiO2催化剂在可见光照射下（λ〉420 nm）降解目标化合物其光化学活性明显优于单掺铈的TiO2催化剂和未掺杂的TiO2.该催化反应涉及到空穴氧化,并伴有羟基自由基（.OH）、超氧自由基（O2.-）及H2O2等氧化物种的产生.     

Enhanced 4-chlorophenol biodegradation by integrating Fe2O3 nanoparticles into an anaerobic reactor: Long-term performance and underlying mechanism

• 4-chlorophenol biodegradation could be enhanced in Fe₂O₃ coupled anaerobic system. • Metabolic activity and electron transport could be improved by Fe₂O₃ nanoparticles. • Functional microbial communities could be enriched in coupled anaerobic system. • Possible synergistic mechanism involved in enhanced dechlorination was proposed. Fe₂O₃ nanoparticles have been reported to enhance the dechlorination performance of anaerobic systems, but the underlying mechanism has not been clarified. This study evaluated the technical feasibility, system stability, microbial biodiversity and the underlying mechanism involved in a Fe₂O₃ nanoparticle-coupled anaerobic system treating 4-chlorophenol (4-CP) wastewater. The results demonstrated that the 4-CP and total organic carbon (TOC) removal efficiencies in the Fe₂O₃-coupled up-flow anaerobic sludge blanket (UASB) were always higher than 97% and 90% during long-term operation, verifying the long-term stability of the Fe₂O₃-coupled UASB. The 4-CP and TOC removal efficiencies in the coupled UASB increased by 42.9±0.4% and 27.5±0.7% compared to the control UASB system. Adding Fe₂O₃ nanoparticles promoted the enrichment of species involved in dechlorination, fermentation, electron transfer and acetoclastic methanogenesis, and significantly enhanced the extracellular electron transfer ability, electron transport activity and conductivity of anaerobic sludge, leading to enhanced 4-CP biodegradation performance. A possible synergistic mechanism involved in enhanced anaerobic 4-CP biodegradation by Fe₂O₃ nanoparticles was proposed.     

Fe2O3-CeO2-Bi2O3/γ-Al2O3 catalyst in the catalytic wet air oxidation (CWAO) of cationic red GTL under mild reaction conditions

Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃, an environmental friendly material, was investigated. The catalyst exhibited good catalytic performance in the CWAO of cationic red GTL. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. HO₂· and O₂·⁻ appeared as the main reactive species in the reaction. The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst, a novel environmental-friendly material, was used to investigate the catalytic wet air oxidation (CWAO) of cationic red GTL under mild operating conditions in a batch reactor. The catalyst was prepared by wet impregnation, and characterized by special surface area (BET measurement), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst exhibited good catalytic activity and stability in the CWAO under atmosphere pressure. The effect of the reaction conditions (catalyst loading, degradation temperature, solution concentration and initial solution pH value) was studied. The result showed that the decolorization efficiency of cationic red GTL was improved with increasing the initial solution pH value and the degradation temperature. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. Hydroperoxy radicals (HO₂·) and superoxide radicals (O₂⁻·) appeared as the main reactive species upon the CWAO of cationic red GTL.     

Mechanistic insights into the selective photocatalytic degradation of dyes over TiO2/ZSM-11

● TiO₂/ZSM-11 was prepared by a facile solid state dispersion method. ● Mechanism for photocatalytic degradation of dyes was investigated. ● Both experimental and MD simulations were conducted. ● Chemisorption instead of electrostatic interaction played a critical role. Photocatalytic degradation is a promising way to eliminate dye contaminants. In this work, a series of TiO₂/ZSM-11 (TZ) nanocomposites were prepared using a facile solid state dispersion method. Methyl orange (MO), methylene blue (MB), and rhodamine B (RhB) were intentionally chosen as target substrates in the photocatalytic degradation reactions. Compared to pristine TiO₂, negative effect was observed on MO degradation while promoted kinetics were collected on MB and RhB over TZ composites. Moreover, a much higher photocatalytic rate was interestingly achieved on RhB than MB, which indicated that a new factor has to be included other than the widely accepted electrostatic interaction mechanism to fully understand the selective photodegradation reactions. Systematic characterizations showed that TiO₂ and ZSM-11 physically mixed and maintained both the whole framework and local structure without chemical interaction. The different trends observed in surface area and the photo-absorption ability of TZ composites with reaction performance further excluded both as the promotion mechanism. Instead, adsorption energies predicted by molecular dynamics simulations suggested that differences in the adsorption strength played a critical role. This work provided a deep mechanistic understanding of the selective photocatalytic degradation of dyes reactions, which helps to rationally design highly efficient photocatalysts.     

CeO2 doping boosted low-temperature NH3-SCR activity of FeTiOx catalyst: A microstructure analysis and reaction mechanistic study

• CeO₂ doping significantly improved low-temperature NH₃-SCR activity on FeTiO_x. • The crystallinity of FeTiO_x was decreased dramatically after CeO₂ doping. • Unique Ce-O-Fe structure in FeCe_0.2TiO_x accounted for its superior redox property. • Facile activation of NH₃ to-NH₂ on FeCe_0.2TiO_x promoted the DeNO_x efficiency. FeTiO_x has been recognized as an environmental-friendly and cost-effective catalyst for selective catalytic reduction (SCR) of NO_x with NH₃. Aimed at further improving the low-temperature DeNO_x efficiency of FeTiO_x catalyst, a simple strategy of CeO₂ doping was proposed. The low-temperature (<250℃) NH₃-SCR activity of FeTiO_x catalyst could be dramatically enhanced by CeO₂ doping, and the optimal composition of the catalyst was confirmed as FeCe_0.2TiO_x, which performed a NO_x conversion of 90% at ca. 200℃. According to X-ray diffraction (XRD), Raman spectra and X-ray absorption fine structure spectroscopy (XAFS) analysis, FeCe_0.2TiO_x showed low crystallinity, with Fe and Ce species well mixed with each other. Based on the fitting results of extended X-ray absorption fine structure (EXAFS), a unique Ce-O-Fe structure was formed in FeCe_0.2TiO_x catalyst. The well improved specific surface area and the newly formed Ce-O-Fe structure dramatically contributed to the improvement of the redox property of FeCe_0.2TiO_x catalyst, which was well confirmed by H₂-temperature-programmed reduction (H₂-TPR) and in situ XAFS experiments. Such enhanced redox capability could benefit the activation of NO and NH₃ at low temperatures for NO_x removal. The detailed reaction mechanism study further suggested that the facile oxidative dehydrogenation of NH₃ to highly reactive-NH₂ played a key role in enhancing the low-temperature NH₃-SCR performance of FeCe_0.2TiO_x catalyst.     

Response of bioaerosol cells to photocatalytic inactivation with ZnO and TiO2 impregnated onto Perlite and Poraver carriers

•ZnO/Perlite inactivated 72% of bioaerosols in continuous gas phase. •TiO₂ triggered the highest level of cytotoxicity with 95% dead cells onto Poraver. •Inactivation mechanism occurred by membrane damage, morphological changes and lysis. •ZnO/Poraver showed null inactivation of bioaerosols. •Catalysts losses at the outlet of the photoreactor for all systems were negligible. Bioaerosols are airborne microorganisms that cause infectious sickness, respiratory and chronic health issues. They have become a latent threat, particularly in indoor environment. Photocatalysis is a promising process to inactivate completely bioaerosols from air. However, in systems treating a continuous air flow, catalysts can be partially lost in the gaseous effluent. To avoid such phenomenon, supporting materials can be used to fix catalysts. In the present work, four photocatalytic systems using Perlite or Poraver glass beads impregnated with ZnO or TiO₂ were tested. The inactivation mechanism of bioaerosols and the cytotoxic effect of the catalysts to bioaerosols were studied. The plug flow photocatalytic reactor treated a bioaerosol flow of 460×1 0⁶ cells/m³_air with a residence time of 5.7 s. Flow Cytometry (FC) was used to quantify and characterize bioaerosols in terms of dead, injured and live cells. The most efficient system was ZnO/Perlite with 72% inactivation of bioaerosols, maintaining such inactivation during 7.5 h due to the higher water retention capacity of Perlite (2.8 mL/g_Perlite) in comparison with Poraver (1.5 mL/g_Perlite). However, a global balance showed that TiO₂/Poraver system triggered the highest level of cytotoxicity to bioaerosols retained on the support after 96 h with 95% of dead cells. SEM and FC analyses showed that the mechanism of inactivation with ZnO was based on membrane damage, morphological cell changes and cell lysis; whereas only membrane damage and cell lysis were involved with TiO₂. Overall, results highlighted that photocatalytic technologies can completely inactivate bioaerosols in indoor environments.     

Enhancement of the electrocatalytic oxidation of antibiotic wastewater over the conductive black carbon-PbO2 electrode prepared using novel green approach

• A novel conductive carbon black modified lead dioxide electrode is synthesized. • The modified PbO₂ electrode exhibits enhanced electrochemical performances. • BBD method could predict optimal experiment conditions accurately and reliably. • The modified electrode possesses outstanding reusability and safety. The secondary pollution caused by modification of an electrode due to doping of harmful materials has long been a big concern. In this study, an environmentally friendly material, conductive carbon black, was adopted for modification of lead dioxide electrode (PbO₂). It was observed that the as-prepared conductive carbon black modified electrode (C-PbO₂) exhibited an enhanced electrocatalytical performance and more stable structure than a pristine PbO₂ electrode, and the removal efficiency of metronidazole (MNZ) and COD by a 1.0% C-PbO₂ electrode at optimal conditions was increased by 24.66% and 7.01%, respectively. Results revealed that the electrochemical degradation of MNZ wastewater followed pseudo-first-order kinetics. This intimates that the presence of conductive carbon black could improve the current efficiency, promote the generation of hydroxyl radicals, and accelerate the removal of MNZ through oxidation. In addition, MNZ degradation pathways through a C-PbO₂ electrode were proposed based on the identified intermediates. To promote the electrode to treat antibiotic wastewater, optimal experimental conditions were predicted through the Box-Behnken design (BBD) method. The results of this study suggest that a C-PbO₂ electrode may represent a promising functional material to pretreat antibiotic wastewaters.     

Size and shape effects of MnFe2O4 nanoparticles as catalysts for reductive degradation of dye pollutants

• Size and shape-dependent MnFe₂O₄ NPs were prepared via a facile method. • Ligand-exchange chemistry was used to prepare the hydrophilic MnFe₂O₄ NPs. • The catalytic properties of MnFe₂O₄ NPs toward dye degradation were fully studied. • The catalytic activities of MnFe₂O₄ NPs followed Michaelis–Menten behavior. • All the MnFe₂O₄ NPs exhibit selective degradation to different dyes. The magnetic nanoparticles that are easy to recycle have tremendous potential as a suitable catalyst for environmental toxic dye pollutant degradation. Rationally engineering shapes and tailoring the size of nanocatalysts are regarded as an effective manner for enhancing performances. Herein, we successfully synthesized three kinds of MnFe₂O₄ NPs with distinctive sizes and shapes as catalysts for reductive degradation of methylene blue, rhodamine 6G, rhodamine B, and methylene orange. It was found that the catalytic activities were dependent on the size and shape of the MnFe₂O₄ NPs and highly related to the surface-to-volume ratio and atom arrangements. Besides, all these nanocatalysts exhibit selectivity to different organic dyes, which is beneficial for their practical application in dye pollutant treatment. Furthermore, the MnFe₂O₄ NPs could be readily recovered by a magnet and reused more than ten times without appreciable loss of activity. The size and shape effects of MnFe₂O₄ nanoparticles demonstrated in this work not only accelerate further understanding the nature of nanocatalysts but also contribute to the precise design of nanoparticles catalyst for pollutant degradation.     

Effect of metal ion-doping on characteristics and photocatalytic activity of TiO2 nanotubes for removal of humic acid from water

The effect of ion-doping on TiO₂ nanotubes were investigated to obtain the optimal TiO₂ nanotubes for the effective decomposition of humic acids (HA) through O₃/UV/ion-doped TiO₂ process. The experimental results show that changing the calcination temperature, which changed the weight fractions of the anatase phase, the average crystallite sizes, the Brunauer-Emmett-Teller surface area, and the energy band gap of the catalyst, affected the photocatalytic activity of the catalyst. The ionic radius, valence state, and configuration of the dopant also affected the photocatalytic activity. The photocatalytic activities of the catalysts on HA removal increased when Ag⁺, Al³⁺, Cu²⁺, Fe³⁺, V⁵⁺, and Zn²⁺ were doped into the TiO₂ nanotubes, whereas such activities decreased as a result of Mn²⁺- and Ni²⁺-doping. In the presence of 1.0 at.% Fe³⁺-doped TiO₂ nanotubes calcined at 550°C, the removal efficiency of HA was 80% with a pseudo-first-order rate constant of 0.158 min⁻¹. Fe³⁺ in TiO₂ could increase the generation of ·OH, which could remove HA. However, Fe³⁺ in water cannot function as a shallow trapping site for electrons or holes.     

Comparing the adsorption behaviors of Cd,Cu and Pb from water onto Fe-Mn binary oxide,MnO2 and FeOOH

The adsorption potential of FMBO, FeOOH, MnO₂ for the removal of Cd²⁺, Cu²⁺ and Pb²⁺ in aqueous systems was investigated in this study. Comparing to FMBO and FeOOH, MnO₂ offered a much higher removal capacity towards the three metal ions. The maximal adsorption capacity of MnO₂ for Cd²⁺, Cu²⁺ and Pb²⁺ were 1.23, 2.25 and 2.60 mmol·g^-1, respectively. And that for FMBO were 0.37, 1.13, and 1.18 mmol·g^-1 and for FeOOH were 0.11, 0.86 and 0.48 mmol·g^-1, respectively. The adsorption behaviors of the three metal ions on the three adsorbents were all significantly affected by pH values and heavy metal removal efficiency increased with pH increased. The Langmuir and Freundlich adsorption models were used to describe the adsorption equilibrium of the three metal ions onto the three adsorbents. Results showed that the adsorption equilibrium data fitted well to Langmuir isotherm and this indicated that adsorption of metal ions occurred on the three metal oxides adsorbents limited to the formation of a monolayer. More negative charged of MnO₂ surface than that of FMBO and FeOOH could be ascribed by lower pH_iep of MnO₂ than that of FMBO and FeOOH and this could contribute to more binding sites on MnO₂ surface than that of FMBO and FeOOH. The higher metal ions uptake by MnO₂ than FMBO and FeOOH could be well explained by the surface charge mechanism.     

Modelling the response of tree growth to temperature and CO2 elevation as related to the fertility and current temperature sum of a site

A methodology for simulating climate change impacts on tree growth was introduced into a statistical growth and yield model in relation to variations in site fertility and location implemented with current temperature sum. This was based on a procedure in which the relative enhancement in stem volume growth was calculated from short-term runs of a physiological simulation model for Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.) and silver birch (Betula pendula Roth.) stands. These simulations were made for a set of stands with species-specific variations in stand characteristics, location and fertility type first in current climatic conditions and then in different combinations of CO₂ and temperature elevations. Based on these simulations, the relative enhancement of volume growth induced by the climate change (relative scenario effect, RSEv) was calculated and modelled in relation to: (i) CO₂ and temperature elevation, stand density and the competition status of the tree in its stand, and (ii) variations in site fertility type and current temperature sum of a stand. Finally, these transfer functions for RSEv were applied to adapt the stem volume growth in the statistical growth and yield model to reflect the response to climate change.     

铅与纳米SiO2联合染毒对A549细胞氧化损伤的影响

为了研究铅与纳米SiO2联合染毒所致的细胞损伤特征,并从氧化应激方面探讨其可能的作用机制。用铅和SiO2处理A549细胞,采用四唑盐(MTT)比色法检测细胞存活率,评价铅和SiO2联合染毒所致的细胞损伤特征;采用硫代巴比妥酸(TBA)比色法检测细胞内丙二醛(MDA)含量,评价铅与SiO2联合染毒所致细胞的氧化应激状态;检测了细胞内抗氧化物还原型谷胱甘肽(GSH)含量以及细胞内抗氧化酶的活性,以评价铅与SiO2联合染毒对细胞抗氧化系统的影响。将实验数据进行ANOVA分析。结果表明,铅、SiO2单独染毒组各指标没有明显改变;而联合染毒能造成细胞氧化损伤,表现为细胞存活率、GSH水平、超氧化物歧化酶(SOD)及谷胱甘肽过氧化物酶(GSH-Px)活性显著低于对照组及2个单独染毒组(P<0.05),细胞内MDA含量显著高于对照组及各单独染毒组(P<0.05)。可见,联合染毒可引起明显的细胞毒性,氧化损伤可能是铅与SiO联合染毒致肺细胞毒性损伤的作用机制之一。     

Optimal resource management control for CO2 emission and reduction of the greenhouse effect

In recent years, the world has witnessed an ever-growing concern towards global warming caused by greenhouse gases, such as carbon dioxide (CO₂). In order to reduce the emissions of CO₂ without limiting economic growth, substantial investments should target the development of clean technology and the expansion of forested areas. Considering the limited availability of resources, investments must be used in the most effective way. The present work proposes a method to efficiently manage these resources by applying the optimal control theory to a new mathematical model that describes the dynamics of the atmospheric CO₂. The contributions of this work are twofold: (1) present a model that describes the dynamic relation of CO₂ emission with investment in reforestation and clean technology and (2) present a method to efficiently manage the available resources by casting an optimal control problem. The mathematical model uses ordinary differential equations to relate the production of CO₂ with forest area and Gross Domestic Product (GDP). The model parameters are adjusted to fit the actual published data. Given an appropriate performance index, the optimal solution is found by numerically solving the Two-Point Boundary Value Problem (TPBVP) that arises from the application of Pontriagyn's Maximum Principle. The sensitivity of the obtained numerical solution is evaluated with respect to the uncertainties in the model parameters. The main objective of this work is to provide a quantitative tool for the efficient allocation of resources to reduce the greenhouse effect caused CO₂ emissions.     

纳米二氧化硅对两性生殖和孤雌生殖卤虫无节幼体毒性影响的比较研究

研究了纳米二氧化硅(Nano-SiO_2)悬浮液对美国大盐湖两性生殖型卤虫(Artemia francisana,GSL)和渤海湾孤雌生殖型卤虫(Artemia parthenogenetica,BH)无节幼体的急性毒性和抗氧化酶系统的影响。研究结果表明,Nano-SiO_2对GSL和BH无节幼体24 h-LC50分别为23.02 mg·m L~(-1)和20.96 mg·m L~(-1),属低级毒性。Nano-SiO_2降低了GSL和BH无节幼体还原型谷胱甘肽(GSH)含量,抑制了过氧化氢酶(CAT)和超氧化物歧化酶(SOD)活性,致丙二醛(MDA)含量升高,表明氧化应激反应是导致Nano-SiO_2对卤虫无节幼体致死的作用机制之一。     

Photocatalytic degradation of the acetaminophen by nanocrystal-engineered TiO2 thin film in batch and continuous system

• Photocatalytic activity was improved in TiO₂ thin film by rapid thermal annealing. • Photoreactor was designed for TiO₂ thin film. • Considerable reusability and durability of prepared photocatalysts were studied. Un-biodegradable pharmaceuticals are one of the major growing threats in the wastewaters. In the current study, TiO₂ thin film photocatalysts were designed by nanocrystal engineering and fabricated for degradation of the acetaminophen (ACE) in a photocatalytic reaction under UV light irradiation in batch and continuous systems. The photocatalyst was prepared by sputtering and then engineered by thermal treatment (annealing at 300℃ (T300) and 650℃ (T650)). The annealing effects on the crystallinity and photocatalytic activity of the TiO₂ film were completely studied; it was found that annealing at higher temperatures increases the surface roughness and grain size which are favorable for photocatalytic activity due to the reduction in the recombination rate of photo-generated electron-hole pairs. For the continuous system, a flat plate reactor (FPR) was designed and manufactured. The photocatalytic performance was decreased with the increase of flow rate because the higher flow rate caused to form the thicker film of the liquid in the reactor and reduced the UV light received by photocatalyst. The reusability and durability of the samples after 6 h of photocatalytic reaction showed promising performance for the T650 sample (annealed samples in higher temperatures).