The migration of uranium into peat-rich soils at Broubster, Caithness, Scotland, U.K.

Uranium is being actively transported from uraniferous sedimentary rocks into a peat bog at the Broubster natural analogue site in Caithness, Scotland. Massive calcareous sandstone within the Caithness Flags sequence is the main source of uranium which resides primarily within diagenetic apatite and dispersed U---Si---Ti phases. Supergene weathering processes have decalcified the sandstone and are effective in mobilising uranium by groundwater leaching, primarily along a fault zone. Uranium transport in solution by means of groundwater and surface flows is effectively terminated by retardation within 4-kyr-old peat deposits laid down on boulder clay. This process of secondary fixation has resulted in a young uranium anomaly in the peat which comprises in excess of 0.1 wt% U. The site has been investigated comprehensively to define the geometry of the anomaly together with the hydrogeology, hydrochemistry, petrology, mineralogy and the nature of the peat sink-term. The main physical and geochemical properties of the system, including the uranium decay series radionuclide distributions in water and solid samples, are documented in this paper. From these data, the processes governing the distribution of uranium have been quantified using a three-dimensional groundwater flow package and an equilibrium speciation model incorporating a recently developed electrostatic surface complexation model to account for cation-organic interactions. The results described form part of a coordinated project on natural radionuclide migration undertaken to improve confidence in predictive methods used for radiological assessment.     

The investigation of compositional and structural characteristics of natural marine organic matter: a review

The natural marine Organic Matter (OM) is a complex mixture of carbohydrates, lipids and proteins present in seawater and sediments, able to affect many processes occurring in the marine environment such as the biochemical cycles of marine nutrients and living organisms. As the complexity of environmental studies concerning OM composition requires the application of accurate analytical methods, the aim of this review is the discussion of the most used and updated methods for OM characterisation, including all the analytical steps from sample preparation to the final instrumental analysis by means of spectroscopic and chromatographic techniques. Recent developments on the structural characteristics of OM are also reported.     

The effect of local-scale physical heterogeneity and nonlinear,rate-limited sorption/desorption on contaminant transport in porous media

Nonideal transport of contaminants in porous media has often been observed in laboratory characterization studies. It has long been recognized that multiple processes associated with both physical and chemical factors can contribute to this nonideal transport behavior. To fully understand system behavior, it is important to determine the relative contributions of these multiple factors when conducting contaminant transport and fate studies. In this study, the relative contribution of physical-heterogeneity-related processes versus those of nonlinear, rate-limited sorption/desorption to the observed nonideal transport of trichloroethene in an undisturbed aquifer core was determined through a series of miscible-displacement experiments. The results of experiments conducted using the undisturbed core, collected from a Superfund site in Tucson, AZ, were compared to those obtained from experiments conducted using the same aquifer material packed homogeneously. The results indicate that both physical and chemical factors, specifically preferential flow and associated rate-limited diffusive mass-transfer and rate-limited sorption/desorption, respectively, contributed to the nonideal behavior observed for trichloroethene transport in the undisturbed core. A successful prediction of trichloroethene transport in the undisturbed core was made employing a mathematical model incorporating multiple sources of nonideal transport, using independently determined model parameters to account for the multiple factors contributing to the nonideal transport behavior. The simulation results indicate that local-scale physical heterogeneity controlled the nonideal transport behavior of trichloroethene in the undisturbed core, and that nonlinear, rate-limited sorption/desorption were of secondary importance.     

Changes in pesticide adsorption with time at high soil to solution ratios

Adsorption of six pesticides (2,4-D, dicamba, fluroxypyr, fluazifop-P, metsulfuron-methyl and flupyrsulfuron-methyl) in nine contrasting soils was measured using two techniques: (i) a classical batch method and (ii) a centrifugation method that allowed the measurement of adsorption at a realistic soil to solution ratio after one and seven days. Although the batch method gived significantly higher values of Kd than the centrifugation method for the more strongly sorbed molecules in the more sorptive soils, it tended to give lower adsorption coefficients compared to the centrifugation method when adsorption was lower. Discrepancies between the two methods were probably mainly due to the vigorous shaking applied in the batch technique that artificially enhances the availability of adsorption sites. This implies that shortly after application, more pesticide may be present in the soil solution and thus be available for degradation, plant uptake or leaching than will be predicted from adsorption coefficient determined using the batch method. Adsorption significantly increased between one and seven days and the extractability of total residues decreased with time. The increase in adsorption was not directly related to the level of adsorption although it was more important in soils containing more organic carbon (p=0.022). These results confirm the importance of time-dependent processes and the necessity to include them in risk assessment procedures. The centrifugation technique is a useful method to measure adsorption of pesticides at realistic soil moisture contents and seems to be an adequate technique to characterise the fraction of pesticide that is available for leaching at a given time after application.     

Controls on atrazine leaching through a soil-unsaturated fractured limestone sequence at Brévilles, France

The objective of this study was to identify the main controls on atrazine leaching through luvisols and calcisols overlying fissured limestone using the dual-permeability model MACRO. The model parameterisation was based on a combination of direct measurements (e.g. hydraulic properties, adsorption and degradation), literature data and calibration against bromide leaching experiments in field plots. A Monte Carlo sensitivity analysis was carried out for a typical application pattern, considering two different depths of unsaturated limestone (15 and 30 m). MACRO calibrations to the field experiments demonstrated the occurrence of strong macropore flow in the luvisol, while transport in the calcisol could be described by the advection-dispersion equation. MACRO simulations of tritium and atrazine leaching qualitatively matched tritium concentration profiles measured in the limestone and atrazine concentrations measured in piezometers and in aquifer discharge via a spring. The sensitivity analysis suggested that the thickness of the limestone, as well as the transport properties and processes occurring in the unsaturated rock (e.g. matrix vs. fissure flow) will have little significant long-term effect on atrazine leaching, mainly because degradation is very slow in the limestone. No mineralization of atrazine was detected in one-year incubations and a mean half-life of 10 years was assumed in the simulations. Instead, processes occurring in the soil exerted the main control on predicted atrazine leaching, especially variations in the degradation rate and the strength of sorption and macropore flow. However, fissure flow in unsaturated rock is expected to exert a much more significant control on groundwater contamination for compounds that degrade more readily in the deep vadose zone.     

Modelling the closure-related geochemical evolution of groundwater at a former uranium mine

A newly developed reactive transport model was used to evaluate the potential effects of mine closure on the geochemical evolution in the aquifer downgradient from a mine site. The simulations were conducted for the K?nigstein uranium mine located in Saxony, Germany. During decades of operation, uranium at the former mine site had been extracted by in situ acid leaching of the ore underground, while the mine was maintained in a dewatered condition. One option for decommissioning is to allow the groundwater level to rise to its natural level, flooding the mine workings. As a result, pore water containing high concentrations of dissolved metals, radionuclides, and sulfate may be released. Additional contamination may arise due to the dissolution of minerals contained in the aquifer downgradient of the mine. On the other hand, dissolved metals may be attenuated by reactions within the aquifer. The geochemical processes and interactions involved are highly non-linear and their impact on the quality of the groundwater and surface water downstream of the mine is not always intuitive. The multicomponent reactive transport model MIN3P, which can describe mineral dissolution-precipitation reactions, aqueous complexation, and oxidation-reduction reactions, is shown to be a powerful tool for investigating these processes. The predictive capabilities of the model are, however, limited by the availability of key geochemical parameters such as the presence and quantities of primary and secondary mineral phases. Under these conditions, the model can provide valuable insight by means of sensitivity analyses.     

Comparison of techniques for estimating PAH bioavailability: uptake in Eisenia fetida, passive samplers and leaching using various solvents and additives

The aim of this study was to evaluate different techniques for assessing the availability of polycyclic aromatic hydrocarbons (PAHs) in soil. This was done by comparing the amounts (total and relative) taken up by the earthworm Eisenia fetida with the amounts extracted by solid-phase microextraction (SPME), semi-permeable membrane devices (SPMDs), leaching with various solvent mixtures, leaching using additives, and sequential leaching. Bioconcentration factors of PAHs in the earthworms based on equilibrium partitioning theory resulted in poor correlations to observed values. This was most notable for PAHs with high concentrations in the studied soil. Evaluation by principal component analysis (PCA) showed distinct differences between the evaluated techniques and, generally, there were larger proportions of carcinogenic PAHs (4-6 fused rings) in the earthworms. These results suggest that it may be difficult to develop a chemical method that is capable of mimicking biological uptake, and thus estimating the bioavailability of PAHs.     

Factors controlling groundwater quality in the Yeonjegu District of Busan City,Korea, using the hydrogeochemical processes and fuzzy GIS

The hydrogeochemical processes and fuzzy GIS techniques were used to evaluate the groundwater quality in the Yeonjegu district of Busan Metropolitan City, Korea. The highest concentrations of major ions were mainly related to the local geology. The seawater intrusion into the river water and municipal contaminants were secondary contamination sources of groundwater in the study area. Factor analysis represented the contamination sources of the mineral dissolution of the host rocks and domestic influences. The Gibbs plot exhibited that the major ions were derived from the rock weathering condition. Piper’s trilinear diagram showed that the groundwater quality was classified into five types of CaHCO₃, NaHCO₃, NaCl, CaCl₂, and CaSO₄ types in that order. The ionic relationship and the saturation mineral index of the ions indicated that the evaporation, dissolution, and precipitation processes controlled the groundwater chemistry. The fuzzy GIS map showed that highly contaminated groundwater occurred in the northeastern and the central parts and that the groundwater of medium quality appeared in most parts of the study area. It suggested that the groundwater quality of the study area was influenced by local geology, seawater intrusion, and municipal contaminants. This research clearly demonstrated that the geochemical analyses and fuzzy GIS method were very useful to identify the contaminant sources and the location of good groundwater quality.

     

Hydrogeochemical behavior of arsenic-enriched groundwater in the deltaic environment: comparison between two study sites in West Bengal, India

Groundwaters have been collected from deltaic areas of West Bengal (Chakdaha and Baruipur blocks) to record their hydrogeochemical characteristics, and to verify the mechanism of arsenic (As) release. The data reveals that shallow (<70 m) groundwaters in both areas are of Ca-Mg-HCO(3) type; however deeper (>70 m) groundwaters in Baruipur areas are slightly enriched with Na, Cl and SO(4), indicating possible saline water intrusion. The groundwater is anoxic (mean Eh: -124 and -131 mV) with high levels of As (mean: 116 and 293 mug/L), Fe (mean: 4.74 and 3.83 mg/L), PO(4) (mean: 3.73 and 3.21 mg/L) and Mn (mean: 0.37 and 0.49 mg/L), respectively for Chakdaha and Baruipur areas. The observed values of As and bicarbonate (mean: 409 and 499 mg/L) in the shallow aquifer are indicative of redox processes (e.g., oxidation of organic matter) favouring the release of As. Moreover, the presence of DOC in the shallow aquifer suggests that organic matter is young and reactive, and may actively engage in redox driven processes. Our study further confirms that both Fe- and Mn-reduction processes are the dominant mechanisms for As release in these groundwaters.     

An evaluation of the extraction efficiencies of some common extractants for Fe, Cr, Mn, Ni, Pb and Cu on five grain-size fractionated, tropical marine sediments

A number of extractants and extraction procedures were evaluated using a variety of tropical marine sediments fractionated on the basis of grain size. Total metal levels obtained by X-ray fluorescence analysis were used in the normalization of levels obtained by these extractants/extraction procedures. A change in extraction efficiency with change in the pH of the extractant used was observed for Fe and Mn irrespective of particle size of the fraction. Iron was extracted uniformly at each leaching level for the <53micro fractions. Manganese had comparable extraction efficiencies with both weak and strong extractants. The extraction efficiencies for Cr were generally low possibly due to an association with the residual phase. The ease with which both Pb and Ni were extracted indicated that they were only loosely bound in the sediments. The extraction efficiencies for Cu varied widely for the fractions of larger particle sizes but fell within narrow ranges for the <53micro fractions.     

Phosphate rock formation and marine phosphorus geochemistry: the deep time perspective

The role that phosphorite formation, the ultimate source rock for fertilizer phosphate reserves, plays in the marine phosphorus (P) cycle has long been debated. A shift has occurred from early models that evoked strikingly different oceanic P cycling during times of widespread phosphorite deposition to current thinking that phosphorite deposits may be lucky survivors of a series of inter-related tectonic, geochemical, sedimentological, and oceanic conditions. This paradigm shift has been facilitated by an awareness of the widespread nature of phosphogenesis—the formation of authigenic P-bearing minerals in marine sediments that contributes to phosphorite formation. This process occurs not just in continental margin sediments, but in deep sea oozes as well, and helps to clarify the driving forces behind phosphorite formation and links to marine P geochemistry.Two processes come into play to make phosphorite deposits: chemical dynamism and physical dynamism. Chemical dynamism involves the diagenetic release and subsequent concentration of P-bearing minerals particularly in horizons, controlled by a number of sedimentological and biogeochemical factors. Physical dynamism involves the reworking and sedimentary capping of P-rich sediments, which can either concentrate the relatively heavy and insoluble disseminated P-bearing minerals or provide an episodic change in sedimentology to concentrate chemically mobilized P. Both processes can result from along-margin current dynamics and/or sea level variations. Interestingly, net P accumulation rates are highest (i.e., the P removal pump is most efficient) when phosphorites are not forming. Both physical and chemical pathways involve processes not dominant in deep sea environments and in fact not often coincide in space and time even on continental margins, contributing to the rarity of high-quality phosphorite deposits and the limitation of phosphate rock reserves. This limitation is becoming critical, as the human demand for P far outstrips the geologic replacement for P and few prospects exist for new discoveries of phosphate rock.     

Natural attenuation of chlorinated solvents at Area 6, Dover Air Force Base: characterization of microbial community structure

A polyphasic approach based on cultivation and direct recovery of 16S rRNA gene sequences was utilized for microbial characterization of an aquifer contaminated with chlorinated ethenes. This work was conducted in order to support the evaluation of natural attenuation of chlorinated ethenes in groundwater at Area 6 at Dover Air Force Base (Dover, DE). Results from these studies demonstrated the aquifer contained relatively low biomass (e.g. direct microscopic counts of < 10(7) bacteria/g of sediment) comprised of a physiologically diverse group of microorganisms including iron reducers, acetogens, sulfate reducers, denitrifiers, aerobic and anaerobic heterotrophs. Laboratory microcosms prepared with authentic sediment and groundwater provided direct microbiological evidence that the mineralization of vinyl chloride and cis-dichloroethene as well as each step in the complete reductive dechlorination of tetracloroethene to ethene can occur in the Area 6 aquifer. Enrichment cultures capable of the oxidative degradation of cis-1,2-dichloroethene (cis-DCE) and vinyl chloride (VC) were obtained from groundwater across the aquifer demonstrating the possible importance of direct, non-cometabolic oxidation of cis-DCE and VC in natural attenuation. Culture-independent analyses based upon recovery of 16S rRNA gene sequences revealed the presence of anaerobic organisms distributed primarily between two major bacterial divisions: the delta subdivision of the Proteobacteria and low-G + C gram positive. Recovery of sequences affiliated with phylogenetic groups containing known anaerobic-halorespiring organisms such as Desulfitobacterium, Dehalobacter, and certain groups of iron reducers provided qualitative support for a role of reductive dechlorination processes in the aquifer. This molecular data is suggestive of a functional linkage between the microbiology of the site and the apparent natural attenuation process. The presence and distribution of microorganisms were found to be consistent with a microbially driven attenuation of chlorinated ethenes within the aquifer and in accord with a conceptual model of aquifer geochemistry which suggest that both reductive and oxidative mechanisms are involved in heterogeneous, spatially distributed processes across the aquifer.     

An integrated assessment of seawater intrusion in a small tropical island using geophysical,geochemical, and geostatistical techniques

In this study, geophysics, geochemistry, and geostatistical techniques were integrated to assess seawater intrusion in Kapas Island due to its geological complexity and multiple contamination sources. Five resistivity profiles were measured using an electric resistivity technique. The results reveal very low resistivity <1 Ωm, suggesting either marine clay deposit or seawater intrusion or both along the majority of the resistivity images. As a result, geochemistry was further employed to verify the resistivity evidence. The Chadha and Stiff diagrams classify the island groundwater into Ca-HCO₃, Ca-Na-HCO₃, Na-HCO₃, and Na-Cl water types, with Ca-HCO₃ as the dominant. The Mg²⁺/Mg²⁺+Ca²⁺, HCO₃ ^?/anion, Cl^?/HCO₃ ^?, Na⁺/Cl^?, and SO₄ ^2?/Cl^? ratios show that some sampling sites are affected by seawater intrusion; these sampling sites fall within the same areas that show low-resistivity values. The resulting ratios and resistivity values were then used in the geographical information system (GIS) environment to create the geostatistical map of individual indicators. These maps were then overlaid to create the final map showing seawater-affected areas. The final map successfully delineates the area that is actually undergoing seawater intrusion. The proposed technique is not area specific, and hence, it can work in any place with similar completed characteristics or under the influence of multiple contaminants so as to distinguish the area that is truly affected by any targeted pollutants from the rest. This information would provide managers and policy makers with the knowledge of the current situation and will serve as a guide and standard in water research for sustainable management plan.     

Effects of sample preparation on the measurement of organic carbon,hydrogen, nitrogen,sulfur, and oxygen concentrations in marine sediments

The elemental composition of marine sediment provides useful information for the study of environmental processes including biogeochemical cycling and contaminant partitioning. It is common practice to acidify marine sediment samples to remove carbonate before measuring the concentrations of organic carbon (C). To date, however the effects of acidification on the concentrations of hydrogen (H), nitrogen (N), sulfur (S) and oxygen (O) in marine sediments have not been explicitly addressed. Acidification may contaminate or alter the sediment samples and create experimental artifacts affecting the validity of resulting H/C, C/N and O/C ratios. The objective of this study was to quantify how various preparation techniques affect the measured concentrations of C, H, N, S and O in marine sediments. Effects of four different pretreatments: unacidified (whole), acidification by HCl vapor, acidification by direct addition of HCl, and combustion were evaluated using five marine sediments and a standard reference material. The magnitude of carbonate loss between the vapor and direct acidification treatments was evaluated using stable C isotope analysis. Carbonates were most effectively removed by direct addition of HCl; and our results agree with findings of other studies which found direct addition of HCl to be the most accurate method for measuring organic C. However, the acid treatments elevated the apparent concentration of H and O; and in a few cases concentrations of N and S were significantly affected by acidification. In general, combustion significantly reduced all elemental concentrations compared to the whole sample. Based on these results, we recommend analysis of the untreated whole sediment for determining N, H, O, and S.     

In situ modification of an aquifer material by a cationic surfactant to enhance retardation of organic contaminants

Sorption of hexadecyltrimethylammonium chloride (HDTMA), a cationic surfactant, on aquifer material from Columbus AFB, Mississippi, U.S.A., was examined. Transport studies using flow-through columns and a box model aquifer showed that an almost stationary zone of HDTMA-modified aquifer material could be produced in situ without a significant decrease in hydraulic conductivity.Perchloroethylene (PCE) and naphthalene sorption isotherms on the HDTMA-modified aquifer material were linear, and sorption coefficients were increased by over two orders of magnitude relative to the unmodified material. The retardation of PCE by insitu emplaced HDTMA zones within a column was examined. Agreement between batch- and column-derived sorption coefficients and breakthrough curve symmetry indicates that local equilibrium was attained. Significant retardation of a naphthalene plume by an in situ emplaced surfactant zone was demonstrated in the box model aquifer system.The experimental results indicate that it is feasible to create in situ a sorbent zone within an aquifer using cationic surfactants. In most situations, the sorbent zone concept needs to be coupled with contaminant degradation processes for sorbent emplacement to be a practical tool in the remediation of groundwater contamination sites. Sorbent zones may be of benefit in the engineering of suitable environments for microbial or abiotic degradation reactions and by providing time slow reactions to occur.     

Sediment distribution on the continental shelf in relation to stream inputs and contamination: hydrodynamic,chemical, mineralogical,and sedimentological characteristics (Ligurian Sea,Italy)

River estuaries, continental shelf, and sediment contamination are closely linked from the point of view of sediment transport and diffusion that is governed by different factors such as sea waves and currents, river flows and floods, and sediment characteristics. Taking these factors into consideration, we have examined marine environmental and marine bottom sediments off the mouth of a stream to highlight the main ways of sediment and contaminant transport and diffusion on the continental shelf. For this purpose, we followed a multidisciplinary approach, studying circulation of water masses, hydrological characteristics of water column, distribution and main characteristics of sediment grain size, sediment mineralogical composition, and metal concentrations of bottom sediments. Our results allowed identifying the presence of preferential ways of sediment deposition and areas of sediment spread for the Entella Stream, as well as the origin of some metals.

     

Pesticides and groundwater quality protection

A simple approach for ranking the leaching of pesticides from surface soil is presented and tentatively calibrated with field data from an agricultural area. The approach is based on the calculation of a leaching index indicating the proportion of active ingredient, with respect to the quantity applied, leaching from a soil model in a given time interval (one year). In the selected area, 85 wells tapping an unconfined aquifer were sampled for groundwater pesticide residue analysis, in order to explore the index region between leachers and nonleachers.     

Groundwater contamination mechanism in a geothermal field: a case study of Balcova, Turkey

The Balcova Geothermal Field (BGF) located in Izmir, Turkey is situated on an east-west directed graben plain within which the hot waters surface from a fault zone that cuts the Mesozoic aged Bornova Flysch. Due to the low permeability and porosity of the Bornova Flysch, the geothermal water cycles along the immediate vicinity of the Agamemnon fault and mixes with cold waters at different depths of this fractured zone. Within the scope of this study, the mixing patterns and the groundwater contamination mechanisms are analyzed by, hydrogeological and hydrogeochemical methods. Based on the results of this research, it has been found out that the hot geothermal water and the cold regional groundwater resources of the surficial aquifer mix within the fractured zone in Bornova Flysch and within the Quaternary alluvium aquifer due to natural and anthropogenic activities including (i) the natural upward movement of geothermal fluid along the fault line, (ii) the accelerated upward seepage of geothermal fluid from faulty constructed boreholes drilled in the area, (iii) the faulty reinjection applications; and, (iv) the uncontrolled discharge of waste geothermal fluid to the natural drainage network. As a result of these activities, the cold groundwater reserves of the alluvial aquifer are contaminated thermally and chemically in such a way that various toxic chemicals including arsenic, antimony and boron are introduced to the heavily used surficial aquifer waters hindering their use for human consumption and agricultural irrigation. Furthermore, the excessive pumping from the surficial aquifer as well as the reduced surface water inflow into BGF due to the dam constructed on Ilica Creek intensify the detrimental effects of this contamination. Based on the results of this study, it can be concluded that the groundwater pollution in BGF will expand and reach to the levels of no return unless a series of preventive measures is taken immediately.     

The quantitative real-time PCR applications in the monitoring of marine harmful algal bloom (HAB) species

In the last decade, various molecular methods (e.g., fluorescent hybridization assay, sandwich hybridization assay, automatized biosensor detection, real-time PCR assay) have been developed and implemented for accurate and specific identification and estimation of marine toxic microalgal species. This review focuses on the recent quantitative real-time PCR (qrt-PCR) technology developed for the control and monitoring of the most important taxonomic phytoplankton groups producing biotoxins with relevant negative impact on human health, the marine environment, and related economic activities. The high specificity and sensitivity of the qrt-PCR methods determined by the adequate choice of the genomic target gene, nucleic acid purification protocol, quantification through the standard curve, and type of chemical detection method make them highly efficient and therefore applicable to harmful algal bloom phenomena. Recent development of qrt-PCR-based assays using the target gene of toxins, such as saxitoxin compounds, has allowed more precise quantification of toxigenic species (i.e., Alexandrium catenella) abundance. These studies focus only on toxin-producing species in the marine environment. Therefore, qrt-PCR technology seems to offer the advantages of understanding the ecology of harmful algal bloom species and facilitating the management of their outbreaks.     

Hydrogeochemical characterization and groundwater quality assessment in intruded coastal brine aquifers (Laizhou Bay,China)

Environmental Science and Pollution Research - The aquifer in the coastal area of the Laizhou Bay is affected by salinization processes related to intense groundwater exploitation for brine...