A composite receptor and dispersion model approach for estimation of effective emission factors for vehicles

It is difficult to estimate vehicular emission factors at traffic junctions for use in dispersion modelling studies. Firstly, because the vehicles are in various modes of operation and secondly, it is difficult to delineate the effects of other contributing sources, mainly the effects of road dust and deposited constituents, which are very prominent at traffic junctions in India. Factor analysis-multiple regression (FA-MR), a receptor modelling technique has been used in this study for apportioning the contributing sources. The measurement data consist of one year's temporal variation of suspended particulate matter (SPM), analysed for its trace metal constituents, and two gaseous components NO₂ and SO₂ at two traffic junctions in Mumbai (India). FA-MR apportioned 40% of the observed SPM to road dust and 15% to vehicular sources. Of the total Pb observed in the SPM, FA-MR apportioned 60% to vehicular sources and 20% to road dust. The field-observed vehicular counts, meteorological parameters and road geometry were used in California line source dispersion model to estimate the effective vehicular emission factor for Pb at one traffic junction. This derived emission factor was used to predict the Pb concentration at second (independent observation) traffic junction. The result was found to be more satisfactory than using default emission factors obtained from literature. Similarly, effective vehicular emission factor for NO₂ was also evaluated for one site and tested for predicting concentrations at the other site.     

Source apportionment of suspended particulate matter at two traffic junctions in Mumbai,India

Very high concentration of suspended particulate matter (SPM) is observed at traffic junctions in India. Factor analysis-multiple regression (FA-MR), a receptor modelling technique has been used for quantitative apportionment of the sources contributing to the SPM at two traffic junctions (Sakinaka and Gandhinagar) in Mumbai, India. Varimax rotated factor analysis identified (qualitative) five possible sources; road dust, vehicular emissions, marine aerosols, metal industries and coal combustion. A quantitative estimation by FA-MR model indicated that road dust contributed to 41%, vehicular emissions to 15%, marine aerosols to 15%, metal industries to 6% and coal combustion to 6% of the SPM observed at Sakinaka traffic junction. The corresponding figures for Gandhinagar traffic junction are 33%, 18%, 15%, 8% and 11%, respectively. Due to limitation in source marker elements analysed about 16% of the remaining SPM at these two traffic junctions could not be apportioned to any possible sources by this technique. Of the observed lead in the SPM, FA-MR apportioned 62% to vehicular emissions, 17% to road dust, 11% to metal industries, 7% to coal combustion and 3% to marine aerosols at Gandhinagar traffic junction and about a similar apportionment for lead in SPM at Sakinaka traffic junction.     

Land Use-related Chemical Composition of Street Sediments in Beijing

BACKGROUND: More than 10 million people are currently living in Beijing. This city faces severe anthropogenic air pollution caused by an intense vehicle increase (11% per year in China), coal combusting power plants, heavy industry, huge numbers of household and restaurant cookers, and domestic heating stoves. Additionally, each year dust storms are carrying particulate matter from the deserts of Gobi and Takla Makan towards Beijing, especially in spring. Other geogenic sources of particulate matter which contribute to the air pollution are bare soils, coal heaps and construction sites occurring in and around Beijing. Streets function as receptor surfaces for atmospheric dusts. Thus, street sediments consist of particles of different chemical compositions from many different sources, such as traffic, road side soils and industry. METHODS: Distributions and concentrations of various chemical elements in street sediments were investigated along a rural-urban transect in Beijing, China. Chemical elements were determined with X-ray fluorescence analysis. Factor analysis was used to extract most important element sources contributing to particulate pollution along a main arterial route of the Chinese capital. RESULTS AND DISCUSSION: The statistical evaluation of the data by factor analysis identifies three main anthropogenic sources responsible for the contamination of Beijing street sediments. The first source is a steel factory in the western part of Beijing. From this source, Mn, Fe, and Ti were emitted into the atmosphere through chimneys and by wind from coal heaps used as the primary energy source for the factory. The second source is a combination of traffic, domestic heating and some small factories in the center of Beijing discharging Cu, Pb, Zn and Sn. Calcium and Cr characterize a third anthropogenic element source of construction materials such as concrete and mortar. Beside the anthropogenic contamination, some elements like Y, Zr, Nb, Ce, and Rb are mainly derived from natural soils and from the deserts. This is supported by mineral phase analysis, which showed a clear imprint of material in road dusts coming from the West-China deserts. CONCLUSIONS: Our results clearly show that the chemical composition of urban road dusts can be used to identify distinct sources responsible for their contamination. The study demonstrates that the chemistry of road dusts is an important monitor to assess the contamination in the urban environment. Chemical composition of street sediments in Beijing comprises the information of different sources of atmospheric particles. RECOMMENDATIONS AND OUTLOOK: This study is only a small contribution to the understanding of substance fluxes related to Beijing's dust. More effort is required to assess Beijing's dust fluxes, since the dust harms the living quality of the inhabitants. Especially the measurable superimposing of long scale transported dust from dry regions with the anthropogenic polluted urban dust makes investigations of Beijing's dust scientifically valuable.     

Health risk assessment of an abandoned herbicide factory site for transportation use in Dalian,China

An abandoned herbicide factory site was used as an example of how planning should be considered for development of the site for transportation use in Dalian, China. Exposure pathways and parameters for three types of transportation use (land for a traffic hub, land for an urban road, and land for a subway) were developed. Twenty-five sampling sites were selected and 38 soil samples were collected in March 2015. Hexachlorobenzene and benzo(a)pyrene which were extracted by Soxhlet extraction and detected by gas chromatography mass spectrometry were the most significant pollutants detected. The maximum concentration of the two pollutants in the surface layer (0–0.5 m) were 0.57 and 3.10 mg/kg, and in the bottom layer (1.0 m) were 2.57 and 3.72 mg/kg, respectively. In this study, risk assessment results based on the established exposure scenario and parameters showed that there was a significant difference in traffic hub land use under specific exposure pathway and common insensitive land use exposure pathways (direct ingestion of soil, dermal contact with soil, and inhalation of soil-derived dust). Commonly considered hexachlorobenzene and benzo(a)pyrene carcinogenic risk values exceeded the maximum acceptable level (10⁻⁶) and were found to be 23.9-fold and 189-fold higher than the carcinogenic risk values, respectively. Parameter sensitivity analysis data showed that for transportation use, the two parameters “EFOa” and “OSIRa” were the most significant factors associated with variation of the carcinogenic risk value. For traffic hub land use, urban road land use, and subway land use, the main exposure pathways were through “inhalation of soil vapors outdoors (from surface soil),” “direct ingestion of soil,” and “inhalation of soil vapors indoors (from bottom soil),” which contributed 84.75, 73.00, and 100.00% to the total risk value, respectively.

     

Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China

A detailed investigation was conducted to understand the contamination characteristics of a selected set of potentially toxic metals in Shanghai. The amount of Pb, Zn, Cu, Cr, Cd and Ni were determined from 273 soil/dust samples collected within urban area. The results indicated that concentration of all metals except Ni in soils was significant, and metal pollution was even severer in roadside dust. A series of metal spatial distribution maps were created through geostatistical analysis, and the pollution hotspots tended to associate with city core area, major road junctions, and the regions close to industrial zones. In attempt of identifying the source of metals through geostatistical and multivariate statistical analyses, it was concluded as follows: Pb, Zn and Cu mainly originated from traffic contaminants; soil Ni was associated with natural concentration; Cd largely came from point-sourced industrial pollution; and Cr, Ni in dust were mainly related to atmospheric deposition.     

Source diagnostics of polycyclic aromatic hydrocarbons in urban road runoff, dust, rain and canopy throughfall

Diagnostic ratios and multivariate analysis were utilized to apportion polycyclic aromatic hydrocarbon (PAH) sources for road runoff, road dust, rain and canopy throughfall based on samples collected in an urban area of Beijing, China. Three sampling sites representing vehicle lane, bicycle lane and branch road were selected. For road runoff and road dust, vehicular emission and coal combustion were identified as major sources, and the source contributions varied among the sampling sites. For rain, three principal components were apportioned representing coal/oil combustion (54%), vehicular emission (34%) and coking (12%). For canopy throughfall, vehicular emission (56%), coal combustion (30%) and oil combustion (14%) were identified as major sources. Overall, the PAH's source for road runoff mainly reflected that for road dust. Despite site-specific sources, the findings at the study area provided a general picture of PAHs sources for the road runoff system in urban area of Beijing.     

Quantifying road dust resuspension in urban environment by Multilinear Engine: A comparison with PMF2

Atmospheric PM pollution from traffic comprises not only direct emissions but also non-exhaust emissions because resuspension of road dust that can produce high human exposure to heavy metals, metalloids, and mineral matter. A key task for establishing mitigation or preventive measures is estimating the contribution of road dust resuspension to the atmospheric PM mixture. Several source apportionment studies, applying receptor modeling at urban background sites, have shown the difficulty in identifying a road dust source separately from other mineral sources or vehicular exhausts. The Multilinear Engine (ME-2) is a computer program that can solve the Positive Matrix Factorization (PMF) problem. ME-2 uses a programming language permitting the solution to be guided toward some possible targets that can be derived from a priori knowledge of sources (chemical profile, ratios, etc.). This feature makes it especially suitable for source apportionment studies where partial knowledge of the sources is available.In the present study ME-2 was applied to data from an urban background site of Barcelona (Spain) to quantify the contribution of road dust resuspension to PM₁₀ and PM_2.5 concentrations. Given that recently the emission profile of local resuspended road dust was obtained (Amato, F., Pandolfi, M., Viana, M., Querol, X., Alastuey, A., Moreno, T., 2009. Spatial and chemical patterns of PM₁₀ in road dust deposited in urban environment. Atmospheric Environment 43 (9), 1650–1659), such a priori information was introduced in the model as auxiliary terms of the object function to be minimized by the implementation of the so-called “pulling equations”.ME-2 permitted to enhance the basic PMF solution (obtained by PMF2) identifying, beside the seven sources of PMF2, the road dust source which accounted for 6.9 μg m^?3 (17%) in PM₁₀, 2.2 μg m^?3 (8%) of PM_2.5 and 0.3 μg m^?3 (2%) of PM₁. This reveals that resuspension was responsible of the 37%, 15% and 3% of total traffic emissions respectively in PM₁₀, PM_2.5 and PM₁. Therefore the overall traffic contribution resulted in 18 μg m^?3 (46%) in PM₁₀, 14 μg m^?3 (51%) in PM_2.5 and 8 μg m^?3 (48%) in PM₁. In PMF2 this mass explained by road dust resuspension was redistributed among the rest of sources, increasing mostly the mineral, secondary nitrate and aged sea salt contributions.     

The uptake of particulates by an urban woodland: site description and particulate composition

Woodlands may improve local air quality by increasing the uptake rates of gaseous, particulate and aerosol pollutants from the atmosphere and can also act as relatively permanent sinks for some pollutants. Rough Wood, Walsall was selected for a study of the material which accumulates on tree foliage because of its location in a densely populated urban area, and its proximity to a motorway with high traffic flow (the M6) and to other pollutant sources. Methods were developed for leaf washing to allow determination of the quantity of dust and the identification of the dust particles present on oak leaves. Elemental analysis of particles was also undertaken using scanning electron microscopy coupled with electron probe microanalysis. A large proportion of particles were organic in origin. Of the inorganic particles, the majority contained silicon and aluminium in varying proportions suggesting that they were soil derived. Some particles were clearly identified as the products of combustion, and sea or road salt was present on leaf surfaces. Some particles contained copper, tin and titanium which may reflect the proximity of Rough Wood to local metal workings. The number of particles counted on leaf surfaces decreased as distance from the motorway increased.     

Study of metal concentrations in the environment near diesel transport routes

In recent years, a river-dredging project has been executed in Nantou, Taiwan. A large number of diesel vehicles carrying gravel and sand shuttle back and forth on the main traffic roads (Tai-16 and Tai-21). The purpose of this study is to figure out the levels of metals contributed by those vehicles to the surrounding environment. Eight stations along the roadside of diesel transport routes were selected as exposure sites, while a small village located about 9 km away from the diesel transport routes was selected as the control site. The mass concentrations of coarse and fine particulate matter indicated that contributions from traffic fleets resulted in a higher percentage of coarse particulate matter in the ambient air at exposure sites in comparison with that at control site. Significantly higher values of EC (elemental carbon) concentrations and ratios of EC/OC (organic carbon) at exposure sites indicate that diesel vehicles at exposure sites contributed a greater amount of pollutants than gasoline vehicles. Exposure site concentrations for all metals measured (Fe, Al, Mn, Pb, Zn, Cu, Ni, Mo and As) for fine and coarse particulate matter were all higher than those at the control site. Recorded levels of metal contents in road dust and riverside soil near Tai-16 and Tai-21 showed that while the traffic fleet did not increase the metal contents of crustal elements in the road dust, it did significantly increase the metal contents of traffic-related elements. Enrichment factors (EFs) were calculated with respect to road dust (EF_road) and with respect to the samples of riverside soil (EF_river). Among these metals, Mo was the most highly-enriched metal. The extremely high EF_river value (4300) of Mo indicates that these stations were highly polluted by diesel emission. Whereas the significantly high EF_road value (810) of Mo implies that a considerable of Mo was emitted from tailpipe of diesel vehicles.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Behavior of particulate matter during high concentration episodes in Seoul

The behavior of particulate matter (PM) during high-concentration episodes was investigated using monitoring data from Guui station, a comprehensive air monitoring station in Seoul, Korea, from January 2008 to March 2010. Five non-Asian dust (ND) episodes and two Asian dust (AD) episodes of high PM concentrations were selected for the study. During the ND episode, primary air pollutants accumulated due to low wind speeds, and PM_2.5 increased along with most other air pollutants. Particles larger than PM_2.5 were also high since these particles were generated by vehicular traffic rather than wind erosion. During strong AD episodes, PM_10–2.5 primarily increased and gaseous primary air pollutants decreased under high wind speeds. However, even during the AD episode, PM_2.5 and gaseous primary air pollutants increased when the effects of AD were weak and wind speeds were low. This study corroborates that accumulation of air pollutants due to a drop in surface wind speed plays an important role in short-term high-concentration occurrences. However, low wind speeds could not be directly linked to local emissions because a significant portion of accumulated air pollutants resulted from long-range transport.     

Dependence of home outdoor particulate mass and number concentrations on residential and traffic features in urban areas

The associations between residential outdoor and ambient particle mass, fine particle absorbance, particle number (PN) concentrations, and residential and traffic determinants were investigated in four European urban areas (Helsinki, Athens, Amsterdam, and Birmingham). A total of 152 nonsmoking participants with respiratory diseases, not exposed to occupational pollution, were included in the study, which comprised a 7-day intensive exposure monitoring period of both indoor and home outdoor particle mass and number concentrations. The same pollutants were also continuously measured at ambient fixed sites centrally located to the studied areas (fixed ambient sites). Relationships between concentrations measured directly outside the homes (residential outdoor) and at the fixed ambient sites were pollutant-specific, with substantial variations among the urban areas. Differences were more pronounced for coarse particles due to resuspension of road dust and PN, which is strongly related to traffic emissions. Less significant outdoor-to-fixed variation for particle mass was observed for Amsterdam and Birmingham, predominantly due to regional secondary aerosol. On the contrary, a strong spatial variation was observed for Athens and to a lesser extent for Helsinki. This was attributed to the overwhelming and time-varied inputs from traffic and other local sources. The location of the residence and traffic volume and distance to street and traffic light were important determinants of residential outdoor particle concentrations. On average, particle mass levels in suburban areas were less than 30% of those measured for residences located in the city center. Residences located less than 10 m from a street experienced 133% higher PN concentrations than residences located further away. Overall, the findings of this multi-city study, indicated that (1) spatial variation was larger for PN than for fine particulate matter (PM) mass and varied between the cities, (2) vehicular emissions in the residential street and location in the center of the city were significant predictors of spatial variation, and (3) the impact of traffic and location in the city was much larger for PN than for fine particle mass.     

Measurements and modelling of PM2.5 concentrations near a major road in Kuopio,Finland

A particle measurement campaign was conducted in a suburban environment near a major road in Kuopio, Central Finland from 3 August to 9 September 1999. The mass concentrations of fine particles (PM_2.5) were measured simultaneously at distances of 12, 25, 52 and 87 m from the centre of a major road at a height of 1.8 m, using identical samplers. The concentration measurements were conducted during 16 daytime hours (from 6.00 a.m. to 10.00 p.m.) for 27 days. Traffic flows and relevant meteorological parameters were measured on-site; meteorological measurements from a nearby synoptic weather station were also utilised. We also suggest a preliminary model for predicting the concentrations of PM_2.5 and apply this model in order to analyse the measured data. The regionally and long-range transported contribution was evaluated on the basis of a semi-empirical mathematical model utilising as input values the daily sulphate, nitrate and ammonium measurements at the EMEP stations (Co-operative programme for monitoring and evaluation of the long-range transmission of air pollutants in Europe). The influence of primary vehicular emissions from the nearest roads was evaluated using a roadside emission and dispersion model, CAR-FMI, in combination with a meteorological pre-processing model, MPP-FMI. The contribution of non-exhaust particulate matter emissions (including resuspension of particulate matter from road surfaces) was estimated simply to be directly proportional to the concentrations originating from primary vehicular emissions. Comparison of the predicted results and measurements yields information on the relative importance of various source categories of the measured concentrations of PM_2.5. The regionally and long-range transported contribution, the primary and non-exhaust vehicular emissions, and other sources were estimated to contribute on average 41±6%, 33±6% and 26±7% of the observed PM_2.5 concentrations, respectively. The model presented could also be applied in other European cities for analysing the source contributions to measured fine particulate matter concentrations.     

山地城市暴雨径流污染特性及控制对策

为了解山城重庆的暴雨径流污染特性,充实国内仍然薄弱的基础资料,对4种用地类型的4场暴雨进行了监测,测试指标包括TSS、COD、TP、TN和NH3-N。结果表明,对于坡度2.5%的交通干道和坡度30%的校园人行道,从污染物浓度降幅的角度考虑初期径流的控制量应分别为2～3 mm和1.8 mm。随降雨时间的延长,路面污染物浓度迅速降低,坡度越大,降低速率越快。对于平均浓度,校园屋顶和草坪的各污染物浓度均达到地表水环境质量Ⅴ类标准(总氮和氨氮除外)。交通干道和校园人行道的总磷平均浓度也满足地表水环境质量Ⅴ类标准,但2种下垫面的COD、TN和氨氮平均浓度分别超出地表水环境质量Ⅴ类标准的2～8倍、1.9～3.1倍和1.9～4.3倍。对于交通干道,场次降雨径流的总氮、总磷和氨氮平均浓度与初期浓度的比值和污染物浓度20 min降幅接近(分别为0.5～0.53和50%～55%)接近,而COD和TSS平均浓度与初期浓度的比值和污染物浓度20 min降幅相近(分别为0.35～0.37和78%～84%)。对于校园人行道,污染物浓度20 min降幅均达到90%以上(90%～96%),场次降雨径流的总氮、总磷、氨氮、COD和TSS的平均浓度与初期浓度的比值接近(0.3～0.4)。研究结果为山地城市暴雨径流的污染控制提供了参考。     

Investigation of respirable suspended particulate trend and relevant environmental factors in Hong Kong downtown areas

As the addressing of high demand of good air quality in urban area, a study on air pollutant dispersion and distribution resulting from vehicular exhaust emission is strongly required. In particular, vehicular exhaust emission has become a major air pollution source in metropolitan city like Hong Kong, which is characterized with the heavy, dense traffic flow and the limited land resources. Respirable suspended particulate (RSP) is one of main pollutants resulted from vehicular exhaust emission in urban area. Hence, in this study, we focus on analyzing the variation of RSP levels including diurnal, monthly and annual patterns at selected roadsides in Hong Kong during the period of 1998--2005. Furthermore, the relationships between RSP level and the relevant meteorological factors such as temperature, rainfall and wind conditions in Hong Kong territory have been discussed as well.     

Concentrations and source apportionment of PM10 and associated elemental and ionic species in a lignite-burning power generation area of southern Greece

Ambient concentrations of PM₁₀ and associated elemental and ionic species were measured over the cold and the warm months of 2010 at an urban and two rural sites located in the lignite-fired power generation area of Megalopolis in Peloponnese, southern Greece. The PM₁₀ concentrations at the urban site (44.2?±?33.6 μg m^?3) were significantly higher than those at the rural sites (23.7?±?20.4 and 22.7?±?26.9 μg m^?3). Source apportionment of PM₁₀ and associated components was accomplished by an advanced computational procedure, the robotic chemical mass balance model (RCMB), using chemical profiles for a variety of local fugitive dust sources (power plant fly ash, flue gas desulfurization wet ash, feeding lignite, infertile material from the opencast mines, paved and unpaved road dusts, soil), which were resuspended and sampled through a PM₁₀ inlet onto filters and then chemically analyzed, as well as of other common sources such as vehicular traffic, residential oil combustion, biomass burning, uncontrolled waste burning, marine aerosol, and secondary aerosol formation. Geological dusts (road/soil dust) were found to be major PM₁₀ contributors in both the cold and warm periods of the year, with average annual contribution of 32.6 % at the urban site vs. 22.0 and 29.0 % at the rural sites. Secondary aerosol also appeared to be a significant source, contributing 22.1 % at the urban site in comparison to 30.6 and 28.7 % at the rural sites. At all sites, the contribution of biomass burning was most significant in winter (28.2 % at the urban site vs. 14.6 and 24.6 % at the rural sites), whereas vehicular exhaust contribution appeared to be important mostly in the summer (21.9 % at the urban site vs. 11.5 and 10.5 % at the rural sites). The highest contribution of fly ash (33.2 %) was found at the rural site located to the north of the power plants during wintertime, when winds are favorable. In the warm period, the highest contribution of fly ash was found at the rural site located to the south of the power plants, although it was less important (7.2 %). Moderate contributions of fly ash were found at the urban site (5.4 and 2.7 % in the cold and the warm period, respectively). Finally, the mine field was identified as a minor PM₁₀ source, occasionally contributing with lignite dust and/or deposited wet ash dust under dry summer conditions, with the summertime contributions ranging between 3.1 and 11.0 % among the three sites. The non-parametric bootstrapped potential source contribution function analysis was further applied to localize the regions of sources apportioned by the RCMB. For the majority of sources, source regions appeared as being located within short distances from the sampling sites (within the Peloponnesse Peninsula). More distant Greek areas of the NNE sector also appeared to be source regions for traffic emissions and secondary calcium sulfate dust.     

Distributions and concentrations of PAHs in Hong Kong soils

Surface soil (0-10 cm) samples from 53 sampling sites including rural and urban areas of Hong Kong were collected and analyzed for 16 EPA priority polycyclic aromatic hydrocarbons (PAHs). Total PAH concentrations were in the range of 7.0-410 microg kg(-1) (dry wt), with higher concentrations in urban soils than that in rural soils. The three predominant PAHs were Fluoranthene, Naphthalene and Pyrene in rural soils, while Fluoranthene, Naphthalene and Benzo(b + k)fluoranthene dominated the PAHs of urban soils. The values of PAHs isomer indicated that biomass burning might be the major origin of PAHs in rural soils, but vehicular emission around the heavy traffic roads might contribute to the soil PAHs in urban areas. A cluster analysis was performed and grouped the detectable PAHs under 4 clusters, which could be indicative of the PAHs with different origins and PAHs affected by soil organic carbon contents respectively.     

Dependence of Home Outdoor Particulate Mass and Number Concentrations on Residential and Traffic Features in Urban Areas

Abstract

The associations between residential outdoor and ambient particle mass, fine particle absorbance, particle number (PN) concentrations, and residential and traffic determinants were investigated in four European urban areas (Helsinki, Athens, Amsterdam, and Birmingham). A total of 152 nonsmoking participants with respiratory diseases, not exposed to occupational pollution, were included in the study, which comprised a 7-day intensive exposure monitoring period of both indoor and home outdoor particle mass and number concentrations. The same pollutants were also continuously measured at ambient fixed sites centrally located to the studied areas (fixed ambient sites). Relationships between concentrations measured directly outside the homes (residential outdoor) and at the fixed ambient sites were pollutant-specific, with substantial variations among the urban areas. Differences were more pronounced for coarse particles due to resuspension of road dust and PN, which is strongly related to traffic emissions. Less significant outdoor-to-fixed variation for particle mass was observed for Amsterdam and Birmingham, predominantly due to regional secondary aerosol. On the contrary, a strong spatial variation was observed for Athens and to a lesser extent for Helsinki. This was attributed to the overwhelming and time-varied inputs from traffic and other local sources. The location of the residence and traffic volume and distance to street and traffic light were important determinants of residential outdoor particle concentrations. On average, particle mass levels in suburban areas were less than 30% of those measured for residences located in the city center. Residences located less than 10 m from a street experienced 133% higher PN concentrations than residences located further away. Overall, the findings of this multi-city study, indicated that (1) spatial variation was larger for PN than for fine particulate matter (PM) mass and varied between the cities, (2) vehicular emissions in the residential street and location in the center of the city were significant predictors of spatial variation, and (3) the impact of traffic and location in the city was much larger for PN than for fine particle mass.     

PM10 emission factors for non-exhaust particles generated by road traffic in an urban street canyon and along a freeway in Switzerland

Recent studies have shown clear contributions of non-exhaust emissions to the traffic related PM10 load of the ambient air. These emissions consist of particles produced by abrasion from brakes, road wear, tire wear, as well as vehicle induced resuspension of deposited road dust. The main scope of the presented work was to identify and quantify the non-exhaust fraction of traffic related PM10 for two roadside locations in Switzerland with different traffic regimes. The two investigated locations, an urban street canyon with heavily congested traffic and an interurban freeway, are considered as being typical for Central Europe. Mass-relevant contributions from abrasion particles and resuspended road dust mainly originated from particles in the size range 1–10 μm. The results showed a major influence of vehicle induced resuspension of road dust. In the street canyon, the traffic related PM10 emissions (LDV: 24 ± 8 mg km^?1 vehicle^?1, HDV: 498 ± 86 mg km^?1 vehicle^?1) were assigned to 21% brake wear, 38% resuspended road dust and 41% exhaust emissions. Along the freeway (LDV: 50 ± 13 mg km^?1 vehicle^?1, HDV: 288 ± 72 mg km^?1 vehicle^?1), respective contributions were 3% brake wear, 56% resuspended road dust and 41% exhaust emissions. There was no indication for relevant contributions from tire wear and abrasion from undamaged pavements.     

Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.