Monitoring fugitive dust emissions from off-highway vehicles traveling on unpaved roads and trails using passive samplers

Vehicles traveling on dry, unpaved roads generate copious quantities fugitive dust that contributes to soil erosion, and potentially threatens human health and ecosystems. The purpose of this study was to develop a low-cost technique for monitoring road dust that would enable land managers to estimate soil loss. The "sticky-trap" collectors developed were evaluated at the Turkey Bay off-highway vehicle (OHV) riding area on the Land Between the Lakes National Recreation Area, in western Kentucky. The results showed that the dust plume created by vehicle traffic was heterogeneous: larger particles were in the lower part of the plume and deposited closer to the source, smaller particles were carried higher in the plume and traveled at least 100 m away from the source. Collection of particles parallel to the source was also heterogeneous, suggesting that measurements taken at a single point may not be appropriate for estimating erosion losses. Measurements taken along two trails indicate that when large numbers of riders are present, dust concentrations may reach unhealthful conditions for riders, but that it is unlikely that fugitive dust is harming native vegetation, given frequent rainfall. The study demonstrated that OHV traffic contributes to substantial erosion of roadbeds because of aeolian transport.     

Industrial pollution transport. Part 2. Control of industrial emissions

Solutions of the pollution transport problem and its adjoint are used to monitor mean pollution concentration in an ecologically important zone. Four strategies of control over pollutants released into the atmosphere by industrial plants are suggested. They differ by the restrictions imposed on the emission rate of each plant. All the strategies use solutions of the adjoint transport problem and assure the fulfillment of the sanitary norm in the zone. A linear interpolation of these strategies also brings pollution level in the zone down to the sanitary norm. A method of detecting the plants violating the prescribed emission rates is also given. A simple example is given to illustrate the strategies suggested.     

Assessing the impact of environmental regulation on pollution abatement and collaborative emissions reduction: Micro-evidence from Chinese industrial enterprises

Given the rapid industrialization and urbanization of China, environmental problems have gradually become major constraints that hinder its sustainable economic development. Moreover, China's pollution abatement and reduction of greenhouse gas emissions have been severely affected by pressures coming from domestic environmental appeals and international environmental diplomacy. By using integrated data from the Chinese Industrial Enterprise and the Chinese Enterprise Environmental Survey and Reporting databases, this study constructs comprehensive indicators of pollutant discharge intensity and carbon emissions index at the enterprise level and uses the panel fixed effect model, Kaya identity, and mediation effect model to assess the effects of environmental regulations on pollution abatement and collaborative emissions reduction from the micro-perspective. Results show that these regulations can abate the pollution emissions of Chinese industrial enterprises and verify the effectiveness of environmental policies. These regulations can also efficiently reduce the carbon dioxide emissions of enterprises through pollution abatement. In other words, environmental regulations facilitate a collaborative emissions reduction of pollutant and greenhouse gas emissions from enterprises. Such collaborative emissions reduction effect is also influenced by the energy structure and consumption of enterprises. This paper presents empirical evidence and policy basis for further improving China's environmental regulation policy system and achieving coordinated progress in China's economic development and environmental governance.     

Exposure to inhalable dust and endotoxin among Danish livestock farmers: results from the SUS cohort study

Studies on personal dust and endotoxin concentrations among animal farmers have been either small or limited to a few sectors in their investigations. The present study aimed to provide comparable information on the levels and variability of exposure to personal dust and endotoxin in different types of animal farmers. 507 personal inhalable dust samples were collected from 327 farmers employed in 54 pig, 26 dairy, 3 poultry, and 3 mink farms in Denmark. Measurements in pig and dairy farmers were full-shift and performed during summer and winter, while poultry and mink farmers were monitored during 4 well-defined production stages. The collected samples were measured for dust gravimetrically and analyzed for endotoxin by the Limulus amebocyte lysate assay. Simple statistics and random-effect analysis were used to describe the levels and the variability in measured dust and endotoxin exposure concentrations. Measured inhalable dust levels had an overall geometric mean of 2.5 mg m(-3) (range 相似文献   

锅炉烟尘测试方法探讨

文章对日常锅炉监测中出现的问题进行了分析,并对《锅炉烟尘测试方法》的改进提出几点建议。     

Emission of mercury to the atmosphere from industrial sources in Poland

The emission factors of mercury and calculation of annual emission into the atmosphere from different industrial sources in Poland are presented. The emission factors in turn depend on mercury concentration in raw materials, as well as on the character of a technological process. The combustion of hard coal and lignite was found to be the major emission source of mercury into the atmosphere.     

Assessment of growth and stemwood quality of Scots pine on territory influenced by alkaline industrial dust

Long-term influence of alkaline dust (pH 12.3–12.7) pollution emitted over 40 years from a cement plant in Estonia was the reason of alkalisation (pH 6.7–7.9) and high concentrations of K, Ca and Mg in the soil of affected territories. Although dust emission has diminished during the last 10 years, the disbalances in nutrition substrate and their influence on the growth of trees are notable up to now. The study of morphological and physical properties of 70–80-year-old Scots pine (Pinus sylvestris L.) crown, stems and stemwood from three different air pollution zones showed serious deviations in comparison with a relatively healthy forest in an unpolluted area. The specimens from polluted trees, if compared to reference site, showed significantly smaller height growth, radial increment and width of annual rings of sapwood. In heartwood wider annual rings were found in polluted areas. In the period of heartwood formation the dust pollution level emitted from the plant was relatively modest and cement dust, which contains elements necessary for mineral nutrition of trees, may have acted as fertiliser. The moisture content in sapwood and heartwood, especially in the upper layers of stems, was lower in the polluted area than in reference site trees. Regression analysis revealed a strong dependence between latewood percentage and sapwood or heartwood in stems of Scots pine in all sample plots.     

Impact of transport and industrial emissions on the ambient air quality of Lahore City, Pakistan

This study was monitored to determine the changes in the micromineral and macromineral composition of common sole (Solea solea), striped red mullet (Mullus surmuletus), and whiting (Merlangius merlangus) throughout the year. Macromineral concentrations in edible parts of fish species were 444–1,559 mg/kg for Na, 1,975–5,130 mg/kg for K, 228–658 mg/kg for Mg, 187–1,105 mg/kg for Ca, and 2,341–7,341 for P, respectively. The highest mercury contents were found in the autumn months. While the highest protein and lowest fat values were found in the summer, the highest ash contents were found in the spring. Mercury content was found to be over the legislative limits in autumn samples for common sole and in summer for striped red mullet. Lead and cadmium contents of striped red mullet were found to be over the legislative limits throughout year.     

Reducing health risk assigned to organic emissions from a chemical weapons incinerator

Organic emissions from a chemical weapons incinerator have been characterized with an improved set of analytical methods to reduce the human health risk assigned to operations of the facility. A gas chromatography/mass selective detection method with substantially reduced detection limits has been used in conjunction with scanning electron microscopy/energy dispersive X-ray spectrometry and Fourier transform infrared microscopy to improve the speciation of semi-volatile and non-volatile organics emitted from the incinerator. The reduced detection limits have allowed a significant reduction in the assumed polycyclic aromatic hydrocarbon (PAH) and aminobiphenyl (ABP) emission rates used as inputs to the human health risk assessment for the incinerator. A mean factor of 17 decrease in assigned human health risk is realized for six common local exposure scenarios as a result of the reduced PAH and ABP detection limits.     

Availability of disaggregated greenhouse gas emissions from beef cattle production: A systematic review

Agriculture is a significant source of anthropogenic greenhouse gas (GHG) emissions, and beef cattle are particularly emissions intensive. GHG emissions are typically expressed as a carbon dioxide equivalent (CO₂e) ‘carbon footprint’ per unit output. The 100-year Global Warming Potential (GWP₁₀₀) is the most commonly used CO₂e metric, but others have also been proposed, and there is no universal reason to prefer GWP₁₀₀ over alternative metrics. The weightings assigned to non-CO₂ GHGs can differ significantly depending on the metric used, and relying upon a single metric can obscure important differences in the climate impacts of different GHGs. This loss of detail is especially relevant to beef production systems, as the majority of GHG emissions (as conventionally reported) are in the form of methane (CH₄) and nitrous oxide (N₂O), rather than CO₂. This paper presents a systematic literature review of harmonised cradle to farm-gate beef carbon footprints from bottom-up studies on individual or representative systems, collecting the emissions data for each separate GHG, rather than a single CO₂e value. Disaggregated GHG emissions could not be obtained for the majority of studies, highlighting the loss of information resulting from the standard reporting of total GWP₁₀₀ CO₂e alone. Where individual GHG compositions were available, significant variation was found for all gases. A comparison of grass fed and non-grass fed beef production systems was used to illustrate dynamics that are not sufficiently captured through a single CO₂e footprint. Few clear trends emerged between the two dietary groups, but there was a non-significant indication that under GWP₁₀₀ non-grass fed systems generally appear more emissions efficient, but under an alternative metric, the 100-year global temperature potential (GTP₁₀₀), grass-fed beef had lower footprints. Despite recent focus on agricultural emissions, this review concludes there are insufficient data available to fully address important questions regarding the climate impacts of agricultural production, and calls for researchers to include separate GHG emissions in addition to aggregated CO₂e footprints.     

Multiparametric approach for an exemplary study of laser printer emissions

The aim of this work was the study, by a multiparametric approach, of emissions from a laser printer in an experimental box-chamber, with particular attention to nanoparticles release. The experimental design included number concentration measurements by Fast Mobility Particle Sizer (FMPS) and chemical characterizations (elements) of size segregated samples collected by Nanomoudi cascade impactor. Volatile Organic Compounds (VOCs) were also sampled by charcoal sorbent tubes by personal sampling pumps. Monitoring of ozone, total volatile organic compounds concentrations and of temperature and humidity values inside the experimental box during the printing processes were also performed by automatic analyzers. The performed monitoring allowed to evidence different ways for particles emissions by laser printers, in particular showing that nanoparticles, characterised by high concentrations of Ba, Zn, B, K, Sr and Na, are set free at the beginning of the printing process. This emission seems to be directly ascribable to the use of toner powder, as all these elements are present in it. The emission of larger particles (ca. 100-320 nm) was observed in subsequent phases of the print process, probably due to the condensation of vapours released during the progressive heating of the fuser roller. This contribution was proved by both the FMPS measurements and the cascade impactor results. Also, a low emission of particles in higher size ranges was evidenced, mainly due to paper related particles. A very high concentration of VOCs was detected inside the chamber and the chemical speciation shows that the major contribution is associated to toner components, even if some species are released from other printer components. Although the formation of secondary species by reaction of VOCs with ozone cannot be excluded, these species were present inside the chamber at concentrations lower than the detection limit.     

Statistical approach for the assessment of water pollution around industrial areas: A case study from Patancheru,Medak district,India

Industrial effluents, surface waters, and subsurface groundwaters were sampled in and around the Patancheru industrial area of Nakkavagu basin, India and analysed. The parameters such as TDS, BOD, COD, and abundances of elements such as Cu, As, Se, F, Fe, are 5 to 10 times more than the permissible limits. These pollutants are contaminating the groundwaters at a faster rate than anticipated. A statistical approach is used to express the magnitude of pollution. Initially, correlation matrices of the major parameters and trace elements followed by factor analysis on them are presented to quantify the aspect of pollution. Factor 1 explaining 43.6% variance has positive loadings for variables TDS, BOD, COD, As, Cu, Se, SO ₄ ^–2 , and Cr, suggesting the factor is interpreted to be the Pollution or Migration of Pollutants. The same variables have negative loadings in the subsurface groundwaters suggesting that Factor 1 for these samples is a the depositionn or precipitation phenomenon. With a critical look at the Factor 1 of both surface and subsurface water samples it is indicated that pollutants migrated and became deposited in the environs of the Patancheru industrial area.     

The effects of anthropogenic particulate emissions on roadway dust and Nerium oleander leaves in Messina (Sicily, Italy)

Complementary studies on the inorganic chemical composition of Nerium oleander leaves collected in the town of Messina (Sicily, Italy) and seven grain-size fractions of local roadway dust have been carried out. Data and maps are presented to show that the particulate matter present in the air of Messina contains trace elements significantly in excess with respect to the average continental earth crust. The anomalies follow the outline of the urban area, the highest concentrations of trace elements being observed where traffic density is highest. Chemical and isotopic analyses of both road dust and Nerium oleander leaves indicate that Pb contamination still characterizes roads with heavy traffic. In addition to Pb, other metals such as Pt, Pd, Sb, Au, Br, Zn, Cu, Mo, and Cd are significantly enriched in roadway dust, indicating their common anthropogenic origin, especially from traffic. SEM/EDS study of some roadway dust particles has shown the presence of gypsum probably of secondary origin, mixed particles formed by coagulation or gas-to-particle conversion, and porous spherical particles apparently emanating from combustion processes.     

Equivalency of a personal dust monitor to the current United States coal mine respirable dust sampler

The United States National Institute for Occupational Safety and Health, through an informal partnership with industry, labor, and the United States Mine Safety and Health Administration, has developed and tested a new instrument known as the Personal Dust Monitor (PDM). The new dust monitor is an integral part of the cap lamp that coal miners normally carry to work and provides continuous information about the concentration of respirable coal mine dust within the breathing zone of that individual. Previous laboratory testing demonstrated that there is a 95% confidence that greater than 95% of individual PDM measurements fall within +/-25% of reference measurements. The work presented in this paper focuses on the relationship between the PDM and respirable dust concentrations currently measured by a coal mine dust personal sampler unit utilizing a 10 mm Dorr-Oliver nylon cyclone. The United Kingdom Mining Research Establishment instrument, used as the basis for coal mine respirable dust standards, had been designed specifically to match the United Kingdom British Medical Research Council (BMRC) criterion. The personal sampler is used with a 1.38 multiplier to convert readings to the BMRC criterion. A stratified random sampling design incorporating a proportionate allocation strategy was used to select a sample of mechanized mining units representative of all US underground coal mines. A sample of 180 mechanized mining units was chosen, representing approximately 20% of the mechanized mining units in production at the time the sample was selected. A total of 129 valid PDM/personal sampler dust sample sets were obtained. A weighted linear regression analysis of this data base shows that, in comparison with the personal sampler, the PDM requires a mass equivalency conversion multiplier of 1.05 [95% C.I.=(1.03, 1.08)] when the small intercept term is removed from the analysis. Removal of the intercept term results in a personal sampler-equivalent concentration increase of 2.9% at a PDM measurement of 2.0 mg m(-3).     

A comparative study of noise levels in some residential,industrial and commercial areas of Delhi

The measurements of noise levels in residential, industrial and commercial areas in the capital city of India, Delhi, were carried out in the month of March and April, 1992. Six sites in residential areas, four in industrial areas and nine in commercial areas were chosen, which were situated in different parts of Delhi. The results of statistical analysis of sound pressure levels show that commercial areas have the highest noise levels followed by industrial and residential areas. Spectral distribution of noise at octave band frequencies have also been presented for the above mentioned areas.     

Methane emissions of differently fed dairy cows and corresponding methane and nitrogen emissions from their manure during storage

This study investigated the effects of supplementing 40 g lauric acid (C₁₂) kg^-1 dry matter (DM) in feed on methane emissions from early-lactating dairy cows and the associated effects on methane, nitrous oxide and ammonia release from the manure during storage. Stearic acid (C₁₈), a fatty acid without assumed methane-suppressing potential in the digestive tract of ruminants, was added at 40 g kg^-1 DM to a control diet. The complete feed consisted of forage and concentrate in a ratio of 1.5:1 (DM basis). The manure was stored for 14 weeks either as complete slurry or, separately, as urine-rich slurry and farmyard manure representing two common storage systems. Methane release of the cows, as measured in respiratory chambers, was lower with C₁₂ by about 20%, but this was mostly resulting from a reduced feed intake and, partly, from a lower rate of fibre digestion. As milk yield declined less than feed intake, methane emission per kg of milk was significantly lower with C₁₂ (11.4 g) than with C₁₈ (14.0 g). Faeces of C₁₂-fed cows had a higher proportion of undigested fibre and accordingly methane release from their manure was higher compared with the manure obtained from the C₁₈-fed cows. Overall, manure-derived methane accounted for8.2% and 15.4% of total methane after 7 and 14 weeks of storage, respectively. The evolution of methane widely differed between manure types and dietary treatments, with a retarded onset of release in complete slurry particularly in the C₁₂ treatment. Emissions of nitrous oxide were lower in the manures from the C₁₂ treatment. This partially compensated for the higher methane release from the C₁₂ manure with respect to the greenhouse gas potential. The total greenhouse gas potential (cow and manure together) accounted for 8.7 and 10.5 kg equivalents of CO₂ cow^-1 d^-1with C₁₂ and C₁₈, respectively. At unaffected urine-N proportion ammonia and total nitrogen losses from stored manure were lower with C₁₂ than with C₁₈ corresponding to the differences in feed and nitrogen intake. The present results suggest that manure storage significantly contributes to total methane emission from dairy husbandry, and that the identification of effective dietary mitigation strategies has to consider both the digestive tract of the animals and the corresponding manure.     

Factor analysis applied to a geochemical study of soils from parts of Medak and Sangareddy areas, Medak district, Andhra Pradesh, India

Preliminary investigations were carried out in and around Medak and Sangareddy areas to study the baseline levels of ten major (Si, Al, Ca, Fe, K, Mg, Mn, Na, P, and Ti) and 14 trace elements (As, Ba, Co, Cr, Cu, Mo, Ni, Pb, Rb, Sr, V, Y, Zn, and Zr) on 97 representative soil samples comprising of topsoil (0–25 cm) and subsoil (90–115 cm). The data was factor analyzed for geochemical associations. Because varimax factor loading values show the best results, these were used in interpretation. The derived factors are usually interpreted as associations of elements that imply a common source or behavior in regard to geogenic or anthropogenic influences. It was found that the difference between topsoil and subsoil is not only expressed by concentration differences but also by element associations. Five factors were extracted in topsoil data and account for 80% of the total data variance, while seven factors were extracted in subsoil, which account for 88% of the total variance, suggesting that metal concentration was controlled by soil composition and also that, apart from natural contributions of trace elements to the soils, human activities like agriculture and industrial growth possibly accounted for elemental inputs in soils.