Surrogate Measures for Providing High Frequency Estimates of Total Suspended Solids and Total Phosphorus Concentrations1

Spackman Jones, Amber, David K. Stevens, Jeffery S. Horsburgh, and Nancy O. Mesner, 2010. Surrogate Measures for Providing High Frequency Estimates of Total Suspended Solids and Total Phosphorus Concentrations. Journal of the American Water Resources Association (JAWRA) 1‐15. DOI: 10.1111/j.1752‐1688.2010.00505.x Abstract: Surrogate measures like turbidity, which can be observed with high frequency in situ, have potential for generating high frequency estimates of total suspended solids (TSS) and total phosphorus (TP) concentrations. In the semiarid, snowmelt‐driven, and irrigation‐regulated Little Bear River watershed of northern Utah, high frequency in situ water quality measurements were recorded in conjunction with periodic chemistry sampling. Site‐specific relationships were developed using turbidity as a surrogate for TP and TSS at two monitoring locations. Methods are presented for employing censored data and for investigating categorical explanatory variables (e.g., hydrologic conditions). Turbidity was a significant explanatory variable for TP and TSS at both sites, which differ in hydrologic and water quality characteristics. The relationship between turbidity and TP was stronger at the upper watershed site where TP is predominantly particulate. At both sites, the relationships between turbidity and TP varied between spring snowmelt and base flow conditions while the relationships between TSS and turbidity were consistent across hydrological conditions. This approach enables the calculation of high frequency time series of TP and TSS concentrations previously unavailable using traditional monitoring approaches. These methods have broad application for situations that require accurate characterization of fluxes of these constituents over a range of hydrologic conditions.     

Estimation of Suspended‐Sediment Concentration From Total Suspended Solids and Turbidity Data for Kentucky, 1978‐19951

Williamson, Tanja N. and Charles G. Crawford, 2011. Estimation of Suspended‐Sediment Concentration From Total Suspended Solids and Turbidity Data for Kentucky, 1978‐1995. Journal of the American Water Resources Association (JAWRA) 47(4):739‐749. DOI: 10.1111/j.1752‐1688.2011.00538.x Abstract: Suspended sediment is a constituent of water quality that is monitored because of concerns about accelerated erosion, nonpoint contamination of water resources, and degradation of aquatic environments. In order to quantify the relationship among different sediment parameters for Kentucky streams, long‐term records were obtained from the National Water Information System of the U.S. Geological Survey. Suspended‐sediment concentration (SSC), the parameter traditionally measured and reported by the U.S. Geological Survey, was statistically compared to turbidity and total suspended solids (TSS), two parameters that are considered surrogate data. A linear regression of log‐transformed observations was used to estimate SSC from TSS; 72% of TSS observations were less than coincident SSC observations; however, the estimated SSC values were almost as likely to be overestimated as underestimated. The SSC‐turbidity relationship also used log‐transformed observations, but required a nonlinear, breakpoint regression that separated turbidity observations ≤6 nephelometric turbidity units. The slope for these low turbidity values was not significantly different than zero, indicating that low turbidity observations provide no real information about SSC; in the case of the Kentucky sediment record, this accounts for 30% of the turbidity observations.     

Load Estimation Method Using Distributions with Covariates: A Comparison with Commonly Used Estimation Methods

Load estimates obtained using an approach based on statistical distributions with parameters expressed as a function of covariates (e.g., streamflow) (distribution with covariates hereafter called DC method) were compared to four load estimation methods: (1) flow‐weighted mean concentration; (2) integral regression; (3) segmented regression (the last two with Ferguson's correction factor); and (4) hydrograph separation methods. A total of 25 datasets (from 19 stations) of daily concentrations of total dissolved solids, nutrients, or suspended particulate matter were used. The selected stations represented a wide range of hydrological conditions. Annual flux errors were determined by randomly generating 50 monthly sample series from daily series. Annual and interannual biases and dispersions were evaluated and compared. The impact of sampling frequency was investigated through the generation of bimonthly and weekly surveys. Interannual uncertainty analysis showed that the performance of the DC method was comparable with those of the other methods, except for stations showing high hydrological variability. In this case, the DC method performed better, with annual biases lower than those characterizing the other methods. Results show that the DC method generated the smallest pollutant load errors when considering a monthly sampling frequency for rivers showing high variability in hydrological conditions and contaminant concentrations.     

Contribution of In‐Channel Processes to Sediment Yield of an Urbanizing Watershed1

Abstract: A study was conducted between September 2003 and September 2006 to obtain baseline sediment inventories and monitor sediment transport and storage along a 3.7 km length of the channel of Valley Creek within Valley Forge National Historical Park, Pennsylvania. Valley Creek is a tributary of the Schuylkill River and drains an urbanizing 60.6 km² watershed that currently has 18% impervious land cover. Numerous field methods were employed to measure the suspended sediment yield, longitudinal profile, cross‐sections, banklines, and particle size distribution of the streambed. Suspended sediment yield for the watershed was measured at a USGS gage located just upstream of the park boundary between July 2004 and July 2005, the period corresponding to field surveys of bank erosion and channel change. The estimated suspended sediment yield of 95.7 t/km²/year is representative of a year with unusually high discharge, including a storm event that produced a peak of 78 m³/s, the second highest discharge on record for the USGS gage. Based on the median annual streamflow for the 24 years of record at the USGS gage from 1983 to 2006, the median annual sediment yield is estimated to be closer to 34 t/km²/year, considerably lower than median and mean values for other sites within the region. The mass of silt, clay, and fine sand derived from bank erosion along the 3.7 km study reach during the field survey period accounts for an estimated 2,340 t, equivalent to about 43% of the suspended sediment load. The mass of fine sediment stored in the bed along the study reach was estimated at 1,500 t, with about 330 t of net erosion during the study period. Although bank erosion appears to be a potentially dominant source of sediment by comparison with annual suspended sediment load, bed sediment storage and potential for remobilization is of the same order of magnitude as the mass of sediment derived from bank erosion.     

Modeled Summer Background Concentration of Nutrients and Suspended Sediment in the Mid‐Continent (USA) Great Rivers1

Angradi, Ted R., David W. Bolgrien, Matt A. Starry, and Brian H. Hill, 2012. Modeled Summer Background Concentration of Nutrients and Suspended Sediment in the Mid‐Continent (USA) Great Rivers. Journal of the American Water Resources Association (JAWRA) 48(5): 1054‐1070. DOI: 10.1111/j.1752‐1688.2012.00669.x Abstract: We used regression models to predict summer background concentration of total nitrogen (N), total phosphorus (P), and total suspended solids (TSS), in the mid‐continent great rivers: the Upper Mississippi, the Lower Missouri, and the Ohio. From multiple linear regressions of water quality indicators with land use and other stressor variables, we determined the concentration of the indicators when the predictor variables were all set to zero — the y‐intercept. Except for total P on the Upper Mississippi River, we could predict background concentration using regression models. Predicted background concentration of total N was about the same on the Upper Mississippi and Lower Missouri Rivers (430 μg l^?1), which was lower than percentile‐based values, but was similar to concentrations derived from the response of sestonic chlorophyll a to great river total N concentration. Background concentration of total P on the Lower Missouri (65 μg l^?1) was also lower than published and percentile‐based concentrations. Background TSS concentration was higher on the Lower Missouri (40 mg l^?1) than the other rivers. Background TSS concentration on the Upper Mississippi (16 mg l^?1) was below a threshold (30 mg l^?1) designed to protect aquatic vegetation. Our model‐predicted concentrations for the great rivers are an attempt to estimate background concentrations for water quality indicators independent from thresholds based on percentiles or derived from stressor‐response relationships.     

A Multi‐Agency Nutrient Dataset Used to Estimate Loads,Improve Monitoring Design,and Calibrate Regional Nutrient SPARROW Models1

Saad, David A., Gregory E. Schwarz, Dale M. Robertson, and Nathaniel L. Booth, 2011. A Multi‐Agency Nutrient Dataset Used to Estimate Loads, Improve Monitoring Design, and Calibrate Regional Nutrient SPARROW Models. Journal of the American Water Resources Association (JAWRA) 47(5):933‐949. DOI: 10.1111/j.1752‐1688. 2011.00575.x Abstract: Stream‐loading information was compiled from federal, state, and local agencies, and selected universities as part of an effort to develop regional SPAtially Referenced Regressions On Watershed attributes (SPARROW) models to help describe the distribution, sources, and transport of nutrients in streams throughout much of the United States. After screening, 2,739 sites, sampled by 73 agencies, were identified as having suitable data for calculating long‐term mean annual nutrient loads required for SPARROW model calibration. These sites had a wide range in nutrient concentrations, loads, and yields, and environmental characteristics in their basins. An analysis of the accuracy in load estimates relative to site attributes indicated that accuracy in loads improve with increases in the number of observations, the proportion of uncensored data, and the variability in flow on observation days, whereas accuracy declines with increases in the root mean square error of the water‐quality model, the flow‐bias ratio, the number of days between samples, the variability in daily streamflow for the prediction period, and if the load estimate has been detrended. Based on compiled data, all areas of the country had recent declines in the number of sites with sufficient water‐quality data to compute accurate annual loads and support regional modeling analyses. These declines were caused by decreases in the number of sites being sampled and data not being entered in readily accessible databases.     

Magnitude,Frequency, and Duration Relations for Suspended Sediment in Stable (“Reference”) Southeastern Streams1

Abstract: Sediment is listed as one of the leading causes of water‐quality impairments in surface waters of the United States (U.S.). A water body becomes listed by a State, Territory or Tribe if its designated use is not being attained (i.e., impaired). In many cases, the prescribed designated use is aquatic health or habitat, indicating that total maximum daily loads (TMDL) targets for sediment should be functionally related to this use. TMDL targets for sediment transport have been developed for many ecoregions over the past several years using suspended‐sediment yield as a metric. Target values were based on data from “reference” streams or reaches, defined as those exhibiting geomorphic characteristics of equilibrium. This approach has proved useful to some states developing TMDLs for suspended sediment, although one cannot conclude that if a stream exceeds the target range, the aquatic ecosystem will be adversely impacted. To address this problem, historical flow‐transport and sediment‐transport data from hundreds of sites in the Southeastern U.S. were re‐examined to develop parameters (metrics) such as frequency and duration of sediment concentrations. Sites determined as geomorphically stable from field evaluations and from analysis of gauging‐station records were sorted by ecoregion. Mean‐daily flow data obtained from the U.S. Geological Survey were applied to sediment‐transport rating relations to determine suspended‐sediment load for each day of record. The frequency and duration that a given concentration was equaled or exceeded were then calculated to produce a frequency distribution for each site. “Reference” distributions were created using the stable sites in each ecoregion by averaging all of the distributions at specified exceedance intervals. As with the “reference” suspended‐sediment yields, there is a broad range of frequency and duration distributions that reflects the hydrologic and sediment‐transport regimes of the ecoregions. Ecoregions such as the Mississippi Valley Loess Plains (#74) maintain high suspended sediment concentrations for extended periods, whereas coastal plain ecoregions (#63 and 75) show much lower concentrations.     

取样及样品前处理对制革废水中总铬的影响

通过利用火焰原子吸收分光光度法测定制革企业不同工艺流程产生废水的总铬,考察不同量具及取样量、不同消解方法和样品保存期限对测定结果的影响。结果表明水样中悬浮物造成的取样不均匀性导致测定结果差异明显,不同消解方法测定制革废水总铬,检测数据具有可比性,固定剂的加入能够使得水样检测数据保持稳定。     

电感耦合等离子体发射光谱法测定环境水样中总磷的干扰及消除

溶液稀释法是一种简单有效的消除非光谱干扰的方法,背景扣除法、干扰系数法是消除光谱干扰的简单常用方法;应用于实际水样分析,效果较好。电感耦合等离子体发射光谱法(ICP-OES)对水样中总磷的测定尚没有国家标准方法,本文对ICP-OES法测定磷的干扰及校正情况给以浅析,更适于环境水样的快速、批量分析。方法检出限、测定下限能满足环境水样的分析要求。     

Estimating Relevance of Organic Carbon,Nitrogen, and Phosphorus Loads to a Blackwater River Estuary1

Abstract: In blackwater river estuaries, a large portion of external carbon, nitrogen, and phosphorus load are combined in complex organic molecules of varying recalcitrance. Determining their lability is essential to establishing the relationship between anthropogenic loads and eutrophication. A method is proposed in which organic C, N, and P are partitioned into labile and refractory forms, based upon first‐order decay estimated by biochemical oxygen demand relative to total organic carbon, and C:N and C:P ratios as a function of organic carbon lability. The technique was applied in developing total maximum daily loads for the lower St. Johns, a blackwater Atlantic coastal plain river estuary in Northeast Florida. Point source organic nutrients were determined to be largely labile. Urban runoff was found to have the highest relative labile organic N and P content, followed by agricultural runoff. Natural forest and silviculture runoff were high in refractory organic N and P. Upstream labile C, N, and P loads were controlled by autochthonous production, with 34‐50% of summer total labile carbon imported as algal biomass. Differentiation of labile and refractory organic forms suggests that while anthropogenic nutrient enrichment has tripled the total nitrogen load, it has resulted in a 6.7‐fold increase in total labile nitrogen load.     

Temporal and Spatial Trends in Nutrient and Sediment Loading to Lake Tahoe,California‐Nevada,USA

Since 1980, the Lake Tahoe Interagency Monitoring Program (LTIMP) has provided stream‐discharge and water quality data—nitrogen (N), phosphorus (P), and suspended sediment—at more than 20 stations in Lake Tahoe Basin streams. To characterize the temporal and spatial patterns in nutrient and sediment loading to the lake, and improve the usefulness of the program and the existing database, we have (1) identified and corrected for sources of bias in the water quality database; (2) generated synthetic datasets for sediments and nutrients, and resampled to compare the accuracy and precision of different load calculation models; (3) using the best models, recalculated total annual loads over the period of record; (4) regressed total loads against total annual and annual maximum daily discharge, and tested for time trends in the residuals; (5) compared loads for different forms of N and P; and (6) tested constituent loads against land use‐land cover (LULC) variables using multiple regression. The results show (1) N and P loads are dominated by organic N and particulate P; (2) there are significant long‐term downward trends in some constituent loads of some streams; and (3) anthropogenic impervious surface is the most important LULC variable influencing water quality in basin streams. Many of our recommendations for changes in water quality monitoring and load calculation methods have been adopted by the LTIMP.     

Hydrologic and Phosphorus Export Behavior of Small Streams in Commercial Poultry‐Pasture Watersheds1

Romeis, J. Joshua, C. Rhett Jackson, L. Mark Risse, Andrew N. Sharpley, and David E. Radcliffe, 2011. Hydrologic and Phosphorus Export Behavior of Small Streams in Commercial Poultry‐Pasture Watersheds. Journal of the American Water Resources Association (JAWRA) 1‐19. DOI: 10.1111/j.1752‐1688.2011.00521.x Abstract: Few watershed‐scale studies have evaluated phosphorus export in streamflow from commercial poultry‐pasture operations. Continuous streamflow and mixed‐frequency water quality datasets were collected from nine commercial poultry‐pasture (AG) and three forested (FORS) headwater streams (2.4‐44 ha) in the upper Etowah River basin of Georgia to estimate total P (TP) loads and examine variability of hydrologic response and water quality of storm and nonstorm‐flow regimes. Data collection duration ranged from 18 to 22 months, and approximately 1,600 water quality samples were collected. Significant (p < 0.1) inverse relationships were detected between peak flow response variables and both drainage area and fraction of forest cover. Order‐of‐magnitude differences in TP and dissolved reactive P (DRP) concentration were observed between AG and FORS sites and among AG sites. TP yields of FORS sites ranged from 0.01 to 0.1 kg P/ha. Yields of AG sites ranged from 0.031 to 3.17 kg P/ha (median = 0.354 kg P/ha). With 95% confidence intervals, AG yields ranged from 0.025 to 13.1 kg P/ha. These small‐watershed‐scale yields were similar to field‐scale yields measured in other studies in other regions. TP yields were significantly related to area‐weighted Mehlich‐1 soil test P concentrations (p = 0.0073) and base‐flow water sample P concentrations (p ≤ 0.0005). Water quality sampling during base‐flow conditions may be a useful screening tool for P risk‐based management programs.     

The Influence of Two‐Stage Ditches with Constructed Floodplains on Water Column Nutrients and Sediments in Agricultural Streams

The two‐stage ditch is a novel management practice originally implemented to increase bank stability through floodplain restoration in channelized agricultural streams. To determine the effects of two‐stage construction on sediment and nutrient loads, we monitored turbidity, and also measured total suspended solids (TSS), dissolved inorganic nitrogen (N) species, and phosphorus (P) after two‐stage ditch construction in reference and manipulated reaches of four streams. Turbidity decreased during floodplain inundation at all sites, but TSS and P, soluble reactive phosphorus (SRP) and total phosphorus (TP) decreased only in the two‐stage ditches with longer duration of inundation. Both TSS and TP were positively correlated within individual streams, but neither were correlated with turbidity. Phosphorus was elevated in the stream to which manure was applied adjacent to the two‐stage reach, but not the reference reach, suggesting that landscape nutrient management plans could restrict nutrient transport to the stream, ultimately determining the efficacy of instream management practices. In addition, ammonium and nitrate decreased in two‐stage reaches with lower initial N concentrations. Overall, results suggest that turbidity, TSS, and TP were reduced during floodplain inundation, but the two‐stage alone may not be effective for managing high inorganic N loads.     

Impacts of Climate Variability and Land Use Alterations on Frequency Distributions of Terrestrial Runoff Loading to Coastal Waters in Southern California1

Abstract: The transport of water, sediment, dissolved and particulate chemicals, and bacteria from coastal watersheds affects the nearshore marine and estuarine waters. In southern California, coastal watersheds deliver water and associated constituents to the nearshore system in discrete pulses. To better understand the pulsed nature of these watersheds, frequency distributions of simulated runoff events are presented for: (1) three land use conditions (1929, 1998, 2050); (2) three time periods (all water years 1989‐2002), only El Nino years (1992, 1993, 1995, 1998); and only non‐El Nino years; and (3) three regions (watershed, uplands, and lowlands). At the watershed scale, there was a significant increase (>200%) in mean event runoff from 1929 to 2050 (0.4‐1.3 cm) due to localized urbanization, which shifted the dominant sources of runoff from the mountains in 1929 (78% of watershed runoff) to the coastal plane for 2050 conditions (51% of watershed runoff). Inter‐annual climate variability was strong in the rainfall and runoff frequency distributions, with mean event rainfall and runoff 66 and 60% larger in El Nino relative to non‐El Nino years. Combining urbanization and climate variability, 2050 land conditions resulted in El Nino years being five times more likely to produce large (>3.0 cm) runoff events relative to non‐El Nino years. Combining frequency distributions of event runoff with regional nutrient export relationships, we show that in El Nino years, one in five events produced runoff ≥2.5 cm and temporary nearshore nitrate and phosphate concentrations of 12 and 1.4 μM, respectively, or approximately 5‐10 times above ambient conditions.     

Development and Application of the 2010 Chesapeake Bay Watershed Total Maximum Daily Load Model

The Phase 5.3 Watershed Model simulates the Chesapeake watershed land use, river flows, and the associated transport and fate of nutrient and sediment loads to the Chesapeake Bay. The Phase 5.3 Model is the most recent of a series of increasingly refined versions of a model that have been operational for more than two decades. The Phase 5.3 Model, in conjunction with models of the Chesapeake airshed and estuary, provides estimates of management actions needed to protect water quality, achieve Chesapeake water quality standards, and restore living resources. The Phase 5.3 Watershed Model tracks nutrient and sediment load estimates of the entire 166,000 km² watershed, including loads from all six watershed states. The creation of software systems, input datasets, and calibration methods were important aspects of the model development process. A community model approach was taken with model development and application, and the model was developed by a broad coalition of model practitioners including environmental engineers, scientists, and environmental managers. Among the users of the Phase 5.3 Model are the Chesapeake watershed states and local governments, consultants, river basin commissions, and universities. Development and application of the model are described, as well as key scenarios ranging from high nutrient and sediment load conditions if no management actions were taken in the watershed, to low load estimates of an all‐forested condition.     

Twenty Years of New Zealand’s National Rivers Water Quality Network: Benefits of Careful Design and Consistent Operation1

Davies‐Colley, Robert J., David G. Smith, Robert C. Ward, Graham G. Bryers, Graham B. McBride, John M. Quinn, and Mike R. Scarsbrook, 2011. Twenty Years of New Zealand’s National Rivers Water Quality Network: Benefits of Careful Design and Consistent Operation. Journal of the American Water Resources Association (JAWRA) 47(4):750‐771. DOI: 10.1111/j.1752‐1688.2011.00554.x Abstract: This paper reviews New Zealand’s National Rivers Water Quality Network (NRWQN), which is now in its third decade of monitoring. The NRWQN is noteworthy for being operationally stable throughout its history, and the resulting consistency is increasingly valuable for detecting water quality trends and for “anchoring” temporary special purpose monitoring campaigns. The NRWQN was carefully designed following considerable effort to learn from monitoring experiences elsewhere. Monthly visits are made to 77 sites (all near hydrometric stations) on 35 river systems that cumulatively drain about one half of the national landscape. “Core” (routinely measured) variables are: conductivity, pH, temperature, dissolved oxygen, visual clarity, turbidity, colored dissolved organic matter, fecal indicator bacteria, and different forms of nitrogen and phosphorus (italics indicate field measurements). Associated benthic biological monitoring comprises monthly visual assessment of periphyton and annual sampling for macro‐invertebrates. We overview the conception, design, initiation, and operational history of the NRWQN, and highlight the diverse applications of its datasets including numerous scientific applications, national‐scale modeling of material fluxes, and state‐of‐environment reporting and practical water management at both regional and national scale. The qualified success of the NRWQN can probably be attributed to careful (and parsimonious) design and consistent operation.