Effects of humic substances on the decomposition of 2,4-dichlorophenol by ozone after extraction from water into acetic acid through activated carbon

The objectives of this study are to clarify the behavior of humic substances throughout the processes of 2,4-dichlorophenol (2,4-DCP) adsorption on granular activated carbon (GAC) from water and extraction into acetic acid, and the influence of the extracted humic substances on the decomposition of 2,4-DCP by ozone in the acetic acid. The adsorption capacity of GAC for 2,4-DCP was not influenced by the humic substances preloaded to have equilibrium concentration of 24.9mg Cl(-1) (14.5mg Cg(-1)). The adsorption capacity of GAC for 2,4-DCP decreased to one tenth of new GAC after the first adsorption-extraction step because of only 16% desorption in the first step. However, 2,4-DCP adsorbed on GAC was completely extracted after the second step suggesting that GAC can be used as adsorbent to transfer 2,4-DCP from water to acetic acid. The concentration ratio of 2,4-DCP from water into acetic acid was around 2x10(5), whereas the concentration ratio of humic substances was about 3.5, indicating that 2,4-DCP was selectively adsorbed and extracted by this system. The first order degradation rate constant for 2,4-DCP by ozone in acetic acid increased with the addition of humic substances. The rate constant with 16mg Cl(-1) of humic substances was 2.6 times as high as that without humic substances. Humic substances behaved as a promoter for the degradation of 2,4-DCP by ozone.     

Adsorption behavior of 2,4-dichlorophenol and pentachlorophenol in an allophanic soil

The adsorption of 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP) by a variable-charge soil from southern Chile was studied in a series of batch equilibration experiments. 2,4-DCP and PCP adsorption behavior was evaluated as a function of pH (pH values of 4.5, 6.0 and 7.5) in a 0.1M KCl (25 degrees C) background solution for soil material collected at three different depths (0-20 cm, 20-40 cm, and 40-60 cm). 2,4-DCP and PCP adsorption decreased with increasing soil pH, suggesting that the undissociated species were adsorbed more readily and that electrostatic repulsion may inhibit partitioning as pH increases. The PCP adsorption was greater than observed for 2,4-DCP and decreased with soil depth. Multiple regression analysis between K(d) and various soil properties indicated that the soil organic carbon content is a strong indicator of chlorophenol adsorption, and in addition to organic carbon, the soil pH is an important property controlling adsorption behavior.     

Treatment and reuse of wastewater in pesticide 2,4-D production

Waste-water from the production of pesticide 2,4-D often contains high concentrations of 2,4-DCP and 2,6-D as the primary pollutants. Treatment of waste-water collected from a 2,4-D manufacturer was carried out using a technology combining acidification with hyper-crosslinked resin NDA-150 adsorption process. The overall process recovered 5.4 kg of 2,4-DCP and 0.6 kg of 2,6-D per cubic metre of the wastewater. The treatment reduced the concentration of 2,4-DCP in the wastewater from >6000 mg/L to <0.5 mg/L. The optimal operation parameters of adsorption and desorption were determined. The hyper-crosslinked resin adsorbent can be re-used after regeneration by NaOH aqueous solution. The recovered 2,4-DCP with a sufficiently high purity may be re-used in the production of 2,4-D. The technology may thus be applied to the treatment of waste-water for reclamation of chemicals for 2,4-D production while minimising the environmental nuisances and hazards that may be caused by these chemicals.     

Fungal bioconversion of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4-dichlorophenol (2,4-DCP)

Ninety strains of fungi from the collection of our mycology laboratory were tested in Galzy and Slonimski (GS) synthetic liquid medium for their ability to degrade the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) and its by-product, 2,4-dichlorophenol (2,4-DCP) at 100 mg l(-1), each. Evolution of the amounts of each chemical in the culture media was monitored by HPLC. After 5 days of cultivation, the best results were obtained with Aspergillus penicilloides and Mortierella isabellina for 2,4-D and with Chrysosporium pannorum and Mucor genevensis for 2,4-DCP. The data collected seemed to prove, on one hand, that the strains responses varied with the taxonomic groups and the chemicals tested, and, on the other hand, that 2,4-D was less accessible to fungal degradation than 2,4-DCP. In each case, kinetics studies with the two most efficient strains revealed that there was a lag phase of 1 day before the onset of 2,4-D degradation, whereas there was none during 2,4-DCP degradation. Moreover, 2,4-DCP was detected transiently during 2,4-D degradation. Finally, M. isabellina improved its degradation potential in Tartaric Acid (TA) medium relative to GS and Malt Extract (ME) media.     

Preparation and reactivation of magnetic biochar by molten salt method: Relevant performance for chlorine-containing pesticides abatement

Molten salt has been regarded as a versatile and environmental-friendly method for the material preparation and waste destruction. In this work, molten FeCl3 was utilized for the generation of magnetic biochar (MBC) derived from simultaneous activation and magnetization of biomass. The sample characterization indicated that MBC had a rough surface with BET surface area of 404 m2/g and total pore volume of 0.35cm3/g. Highly dispersed Fe3O4 and nitrogen could be deposited on the surface, leading to an excellent magnetization property. The MBC exhibited a great 2,4-Dichlorophenol (2.4-DCP) and atrazine removal performance in solution with the maximum adsorption capacity achieved 298.12 mg/g and 102.17 mg/g. Kinetics results demonstrated that MBC adsorption met the Pseudo-first-order model better. Molten NaOH-Na2CO3 was provided for the re-activation of exhausted MBC. 2,4-DCP was firstly desorbed from the MBC and subsequently destructed by the active species in the melt medium. Chlorine can be captured in the molten alkaline medium from the XRD pattern of residues.The MBC could be easily recovered with a yield of 98.2% and fixed carbon content of 61.0% after the molten salt regeneration process. With no 2,4-DCP detected, 65.5% and 31.69% of initial Cl was found in washing water and residues with the molten NaOH-Na2CO3, respectively. After 4 cycles of regeneration and adsorption, 60.55%-72.22% of initial adsorption capacity can be kept. This preparation and regeneration method can be an effective way to reduce the risk of secondary pollution of chlorinated organic compounds during adsorbent regeneration.

Implications: Molten salt (MS) is a salt or multiple salts with a low melting point, and has been applied in many sectors and is regarded as a crucial role in terms of energy, environmental, and resource sustainability. In our paper, magnetic biochar was prepared by one-step activation and magnetization of fir dust using molten FeCl₃?6H₂O. Meanwhile, a regeneration method using molten alkaline salt was provided. Magnetic biochar generated in our study performed well in the 2,4-dichlorophenol and atrazine adsorption. After four cycles of regeneration and adsorption, 72.2% of initial 2,4-DCP adsorption capacity can be kept.     

Biodegradation of 2,4-dichlorophenol in sequencing batch reactors augmented with immobilized mixed culture

2,4-Dichlorophenol (2,4-DCP) degrading mixed culture was immobilized in polyvinyl alcohol jel beads and supplemented to sequencing batch reactors (SBR) to treat 2,4-DCP containing wastewater. Impacts of bioaugmentation level on the performance of bioaugmented systems were studied. Results show that inoculum size affected the start-up time of the SBR systems. For the non-augmented SBR system, nine days was needed for the system to start-up, whereas it only took six, four, three and two days for the SBRs with 1.9%, 3.7%, 5.6% and 9.3% immobilized culture, respectively. In addition, bioaugmented SBR systems demonstrated stronger capacity to cope with high 2,4-DCP shock loading than the control system. The control SBR failed to treat 2,4-DCP at 166 mg/l in influent, while the SBR with 1.9% inoculation could successfully cope with 2,4-DCP at 166 mg/l, but failed at 250 mg/l, and the SBR with 3.7%, 5.6% and 9.3% immobilized culture could successfully degrade 250 mg/l 2,4-DCP in feed. Furthermore, the contributions to the removal of 2,4-DCP by the introduced and indigenous culture in an augmented SBR system at various operation stages were investigated. It was found that augmented culture played the primary role in degrading 2,4-DCP at the beginning of system start-up, but after one-month operation, both the indigenous and the introduced culture posed strong ability to degrade 2,4-DCP.     

Removal of carbamazepine and clofibric acid from water using double templates–molecularly imprinted polymers

A novel double templates–molecularly imprinted polymer (MIP) was prepared by precipitation polymerization using carbamazepine (CBZ) and clofibric acid (CA) as the double templates molecular and 2-vinylpyridine as functional monomer. The equilibrium data of MIP was well described by the Freundlich isotherm model. Two kinetic models were adopted to describe the experimental data, and the pseudo second-order model well-described adsorption of CBZ and CA on the MIP. Adsorption experimental results showed that the MIP had good selectivity and adsorption capacity for CBZ and CA in the presence of competitive compounds compared with non-imprinted polymer, commercial powdered activated carbon, and C18 adsorbents. The feasibility of removing CBZ and CA from water by the MIP was demonstrated using tap water, lake water, and river water.     

Decomposition of trichloroethylene and 2,4-dichlorophenol by ozonation in several organic solvents

The effects of chemical characteristics of organic solvents on the decomposition rate constants of undissociative trichloroethylene (TCE) and dissociative 2,4-dichlorophenol (2,4-DCP) by ozonation were studied. The TCE and 2,4-DCP decomposition by ozonation in organic solvents followed to the first-order reaction kinetics with respect to TCE or 2,4-DCP concentration. The orders of the rate constants among organic solvents for undissociative TCE and dissociative 2,4-DCP were different indicating that the ozonation rates for undissociative and dissociative compounds were dependent on the chemical property of organic solvent. The decomposition of undissociative TCE by ozonation was a simple electrophilic reaction, which was dependent on acceptor number (AN) of the solvent. On the other hand, the decomposition of dissociative 2,4-DCP was dependent on by the dissociation of the compounds and would be dependent on donor number (DN) of the solvent. Finally, TCE in acetic acid was transformed to chlorinated intermediates and chloride ion and then these intermediates were continuously oxidized to chlorine gas.     

Aerobic granulation for 2,4-dichlorophenol biodegradation in a sequencing batch reactor

Development of aerobic granules for the biological degradation of 2,4-dichlorophenol (2,4-DCP) in a sequencing batch reactor was reported. A key strategy was involving the addition of glucose as a co-substrate and step increase in influent 2,4-DCP concentration. After operation of 39d, stable granules with a diameter range of 1-2mm and a clearly defined shape and appearance were obtained. After granulation, the effluent 2,4-DCP and chemical oxygen demand concentrations were 4.8mgl(-1) and 41mgl(-1), with high removal efficiencies of 94% and 95%, respectively. Specific 2,4-DCP biodegradation rates in the granules followed the Haldane model for substrate inhibition, and peaked at 39.6mg2,4-DCPg(-1)VSS(-1)h(-1) at a 2,4-DCP concentration of 105mgl(-1). Efficient degradation of 2,4-DCP by the aerobic granules suggests their potential application in the treatment of industrial wastewater containing chlorophenols and other inhibitory chemicals.     

Adsorption of phenols by papermill sludges

In this paper we studied the sorption capacity of paper mill sludges for phenols. Phenol, 2-chlorophenol (2-CP), 3-chlorophenol 3-CP). 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), 2.4-dichlorophenol (2,4-DCP), 3,4-dichlorophenol (3,4-DCP) 3,5-dichlorophenol (3,5-DCP) and 2,4,5-trichlorophenol (2,4,5-TCP) were chosen for the sorption tests. Kinetic experiments showed that substituted-phenol sorption on papermill sludge was rapid (equilibrium was reached after 3 h); conversely, the time taken by the phenol to reach equilibrium conditions was 260 h. Experimental data showed that particle diffusion was involved in the sorption process but was not the only rate-limiting mechanism; several other mechanisms were involved. The adsorption isotherms showed the following order of retention capacity of papermill sludge: 2-NP = 4-NP < < 2-CP < phenol < 4-CP < or = 3-CP < 2,4 DCP<3,4 DCP=2,4,5 TCP<3,5 DCP. In all cases the experimental data showed a good fit with the Hill equation. which is mathemratically equivalent to the Langmuir-Freundlich model obtained by assuming that the surface is homogeneous, and that the adsorption is a cooperative process influenced by adsorbate-adsorbate interactions.     

Laccase mediated biodegradation of 2,4-dichlorophenol using response surface methodology

The effects of different environmental parameters, i.e., pH, temperature, time and enzyme concentration on the biodegradation of 2,4-dichlorophenol (2,4-DCP) in aqueous phase was evaluated with laccase from Pleurotus sp. using response surface methodology (RSM) in the present investigation. The Box-Behnken design of experiments was used to construct second order response surfaces with the investigated parameters. It was observed that the maximum degradation efficiency of approximately 98% was achieved at pH 6, temperature of 40 degrees C, time 9h and an enzyme concentration of 8IUml(-1). The adequacy of the model was confirmed by the coefficient of multiple regression, R(2) and adjusted R(2) which were adjudged to be 87.9% and 73.6%, respectively indicating a reasonably good model for practical implementation. Despite the fact that many successful attempts have been taken in the past for biodegradation of 2,4-DCP using whole cells, the present study emphasizes the fastest biodegradation of 2,4-DCP, a potent xenobiotic compound.     

Copolymerization of 2,4-dichlorophenol with humic substances by oxidative and photo-oxidative biomimetic catalysis

We evaluated the catalytic activity of a water-soluble iron-porphyrin in an oxidative coupling reaction to form covalent bonds between 2,4-dichlorophenol (2,4-DCP) and humic molecules. The biomimetic catalysis in the presence of H₂O₂ was tested in the dark and in daylight, and changes in reaction products were revealed by high-performance liquid chromatography (HPLC) and nuclear magnetic resonance (NMR) spectroscopy. In all conditions, iron-porphyrin was effective in promoting complete disappearance of 2,4-DCP, although catalyst activity was enhanced in daylight (with a maximum turnover number of 85.13). Further evidence of the occurred covalent coupling between 2,4-DCP and humic molecules was revealed by diffusion-ordered nuclear magnetic resonance (DOSY-NMR) spectroscopy that showed a reduced diffusivity of 2,4-DCP after the catalytic reaction. These findings indicate that iron-porphyrin is an efficient catalyst for the covalent binding of polyhalogenated phenols to humic molecules, thereby suggesting that the copolymerization reactions may become a useful technology to remediate soils and waters contaminated by halogenated phenols and their analogues.     

Mobilization of phenol and dichlorophenol in unsaturated soils by non-uniform electrokinetics

The poor mobility of organic pollutants in contaminated sites frequently results in slow remediation processes. Organics, especially hydrophobic compounds, are generally retained strongly in soil matrix as a result of sorption, sequestration, or even formation into non-aqueous-phase liquids and their mobility is thus greatly reduced. The objective of this study was to evaluate the feasibility of using non-uniform electrokinetic transport processes to enhance the mobility of organic pollutants in unsaturated soils with no injection reagents. Phenol and 2,4-dichlorophenol (2,4-DCP), and kaolin and a natural sandy loam soil were selected as model organics and soils, respectively. The results showed that non-uniform electrokinetics can accelerate the desorption and movement of phenol and 2,4-DCP in unsaturated soils. Electromigration and electroosmotic flow were the main driving forces, and their role in the mobilization of phenol and 2,4-DCP varied with soil pH. The movement of 2,4-DCP in the sandy loam towards the anode (about 1.0 cmd(-1)V(-1)) was 1.0-1.5 cmd(-1)V(-1) slower than that in the kaolin soil, but about 0.5 cmd(-1)V(-1) greater than that of phenol in the sandy loam. When the sandy loam was adjusted to pH 9.3, the movement of phenol and 2,4-DCP towards the anode was about twice and five times faster than that at pH 7.7, respectively. The results also demonstrated that the movement of phenol and 2,4-DCP in soils can be easily controlled by regulating the operational mode of electric field. It is believed that non-uniform electrokinetics has the potential for practical application to in situ remediation of organics-contaminated sites.     

Effects of chronic exposure of 2,4-dichlorophenol on the antioxidant system in liver of freshwater fish Carassius auratus

There were few reports on the antioxidant response of aquatic organisms exposed to 2,4-dichlorophenol (2,4-DCP). This research explored the hepatic antioxidant responses of fish to long-term exposure of 2,4-DCP for the first time. Freshwater fish Carassius auratus were chosen as experimental animals. The fish were exposed to six different concentrations of 2,4-DCP (0.005-1.0 mg/l) for 40 days and then liver tissues were separated for determination. As shown from the results, 40 days afterwards, the activities of catalase (CAT) and selenium-dependent glutathione peroxidase (Se-GPx) and the content of oxidized glutathione (GSSG) were induced significantly on the whole compared to control group; superoxide dismutase (SOD) responded to 2,4-DCP exposure at only 0.005 mg/l; the content of reduced glutathione (GSH) was suppressed continuously except Group 7; the activity of glutathione reductase was inhibited initially and then restored to control level from Group 4 on; glutathione S-transferase had only slight responses in Groups 3 and 4. Total glutathione (tGSH) and GSH/GSSG ratio were also calculated to analyze the occurrence of oxidative stress. Besides, good dose-effect relations, which cover most of the exposure concentration range, were found between 2,4-DCP level and CAT activity, GSSG content, Se-GPx activity, respectively. In conclusion, SOD and Se-GPx may be potential early biomarkers of 2,4-DCP contamination in aquatic ecosystems, and further studies will be necessary.     

Biogenic volatile organic compounds as a potential stimulator for organic contaminant degradation by soil microorganisms

The effects of monoterpenes on the degradation of ¹⁴C-2,4-dichlorophenol (DCP) were investigated in soils collected from areas surrounding monoterpene and non-monoterpene-emitting vegetation. Indigenous microorganisms degraded ¹⁴C-2,4-DCP to ¹⁴CO₂, after 1 d contact time. Degradation was enhanced by prior exposure of the soils to 2,4-DCP for 32 d, increasing extents of mineralisation up to 60%. Monoterpene amendments further enhanced 2,4-DCP degradation, but only following pre-exposure to both 2,4-DCP and monoterpene, with total 2,4-DCP mineralisation extents of up to 71%. Degradation was greatest at the higher monoterpene concentrations (≥1 μg kg⁻¹). Total mineralisation extents were similar between concentrations, but higher than the control and the 0.1 μg kg⁻¹ amendment, indicating that increases in monoterpene concentration has a diminishing enhancing effect. We suggest that monoterpenes can stimulate the biodegradation of 2,4-DCP by indigenous soil microorganisms and that monoterpene amendment in soils is an effective strategy for removing organic contaminants.     

Electrogeneration of H(2) for Pd-catalytic hydrodechlorination of 2,4-dichlorophenol in groundwater

A novel electrolytic groundwater remediation process, which used the H₂ continuously generated at cathode to achieve in situ catalytic hydrodechlorination, was developed for the treatment of 2,4-dichlorophenol (2,4-DCP) in groundwater. Catalytic hydrodechlorination using Pd supported on bamboo charcoal and external H₂ showed that 2,4-DCP was completely dechlorinated to phenol within 30 min at pH ? 5.5. In a divided electrolytic system, the catalytic hydrodechlorination of 2,4-DCP in cathodic compartment by H₂ generated at the cathode under 20 and 50 mA reached 100% at 120 and 60 min, respectively. Two column experiments with influent pHs of 5.5 (unconditioned) and 2 were conducted to evaluate the feasibility of this process. The 2,4-DCP removal efficiencies were about 63% and nearly 100% at influent pHs of 5.5 and 2, respectively. Phenol was solely produced by 2,4-DCP hydrodechlorination, and was subsequently degraded at the anode. A low pH could enhance the hydrodechlorination, but was not necessarily required. This study provides the preliminary results of a novel effective electrolytic process for the remediation of groundwater contaminated by chlorinated aromatics.     

A tiered ecological risk assessment of three chlorophenols in Chinese surface waters

Introduction

The ecological risks posed by three chlorophenols (CPs), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and pentachlorophenol (PCP) in Chinese surface waters were assessed.

Materials and methods

This was achieved by applying a tiered ecological risk assessment (ERA) approach ranging from deterministic methods to probabilistic options to measured concentrations of CPs in surface water of seven major watersheds and three drainage regions in China and the chronic toxicity data for indigenous Chinese species.

Results and discussion

The results show that the risks of three chlorophenols are ranked PCP>2,4-DCP??2,4,6-TCP. PCP posed little ecological risk while 2,4-DCP and 2,4,6-TCP posed negligible or de minimis risk in Chinese surface water. However, the risks varied with different river basins, for example, PCP posed some ecological risk in the Yangtze, Huaihe, and Pearl Rivers. The magnitude of 2,4-DCP and 2,4,6-TCP pollution in North China was more serious than that in South China.

Conclusion

The probabilistic risk assessment approach, which can provide more information for risk managers and decision makers, was favored over the screening-level single-value estimate method. However, the results from all tiers of the ERA methods in the framework were consistent with each other.     

Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres

A molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using diclofenac (DFC) as a template. Binding characteristics of the MIP were evaluated using equilibrium binding experiments. Compared to the non-imprinted polymer (NIP), the MIP showed an outstanding affinity towards DFC in an aqueous solution with a binding site capacity (Q_max) of 324.8 mg/g and a dissociation constant (K_d) of 3.99 mg/L. The feasibility of removing DFC from natural water by the MIP was demonstrated by using river water spiked with DFC. Effects of pH and humic acid on the selectivity and adsorption capacity of MIP were evaluated in detail. MIP had better selectivity and higher adsorption efficiency for DFC as compared to that of powdered activated carbon (PAC). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance, which is a definite advantage over single-use activated carbon.     

Deriving freshwater quality criteria for 2,4-dichlorophenol for protection of aquatic life in China

Freshwater quality criteria for 2,4-dichlorophenol (2,4-DCP) were developed with particular reference to the aquatic biota in China, and based on USEPA's guidelines. Acute toxicity tests were performed on nine different domestic species indigenous to China to determine 48-h LC50 and 96-h LC50 values for 2,4-DCP. In addition, 21 day survival-reproduction tests with Daphnia magna, 30-day embryo-larval tests with Carassius auratus, 60 day fry-juvenile test with Ctenopharyngodon idellus, 30 d early life stage tests with Bufo bufo gargarizans and 96 h growth inhibition tests with Scenedesms obliqaus were conducted, to estimate lower chronic limit (LCL) and upper chronic limit (UCL) values. The final acute value (FAV) was 2.49 mg/l 2,4-DCP. Acute-to-chronic ratios (ACR) ranged from 3.74 to 22.5. The final chronic value (FCV) and the final plant value (FPV) of 2.4-DCP were 0.212 mg/l and 7.07 mg/l respectively. Based on FAV, FCV, and FPV, a criteria maximum concentration (CMC) of 1.25 mg/l and a criterion continuous concentration (CCC) of 0.212 mg/l were derived. The results of this study provide useful data for deriving national or local water quality criteria for 2,4-DCP based on aquatic biota in China.