刍议长三角地区的生态建设

长三角地区城市化和工业化带来区域经济迅猛发展的同时,也导致了长三角生态系统组分比例失调、结构缺损、功能丧失、环境容量萎缩等生态问题.湿地兼有自然"肾"、"肺"双功能.利用长三角地区湿地生态系统的独特性和内在优势,加强湿地生态建设、生态保护、生态恢复与生态重建,拓展环境容量,可保障该区域可持续发展的实现.从地质地貌、自然史发展、自然经济学和区域发展等角度探讨了长三角地区湿地的生态服务价值的现存价值和理论价值,分析讨论了长三角自然湿地、城市区湿地和农业区湿地的生态建设思路.     

Economy-wide material flow indicators in the Czech Republic: trends, decoupling analysis and uncertainties

Material and energy flows (together with human appropriation of land) are considered the key cause of environmental problems. This paper describes the application of economy-wide material flow accounting and analysis to the economy of the Czech Republic for 1990-2002. The results show a decrease of material intensity and decoupling of the economic growth from environmental pressure. The second part of the paper treats an important issue of uncertainties related to economy-wide material flow indicators in the Czech Republic. The results point out that the high uncertainties related to some material flow indicators may be an obstacle to their applicability.     

Biosolids management strategies: an evaluation of energy production as an alternative to land application

Currently, more than half of the biosolids produced within the USA are land applied. Land application of biosolids introduces organic contaminants into the environment. There are potential ecological and human health risks associated with land application of biosolids. Biosolids may be used as a renewable energy source. Nutrients may be recovered from biosolids used for energy generation for use as fertilizer. The by-products of biosolids energy generation may be used beneficially in construction materials. It is recommended that energy generation replace land application as the leading biosolids management strategy.     

Mitigating environmental impact of waste glass materials: review of the existing reclamation options and future outlook

The environmental impact of waste glass (WG) is one of the major challenges crippling sustainable waste management and mitigation. Reclamation of recycled materials from waste glass remains a tedious task amidst complex technological approaches. The challenge as seen in the global containment measures increase the proportion of waste glass and minimize the existing capacity of landfill space. In many works, findings have shown how best to minimize the impact of waste glass as evidenced in their inclusion as building materials such as cement, mortars, concretes and blocks. The concept of this paper is to appraise previous studies carried out on the use of waste glass as key contributing factor in structural building. The scope of this paper will be broaden to include various successes recorded in the evolution of concrete mixtures containing different proportion of recycle glass. Part of the setbacks noted in the inclusion of these recycled materials as matrix, filler or fibre are also reported in this paper. Also discussed is the durability of glass materials in varying conglomerate involving cement in reinforcement of building and structures. Thermal insulating properties of recycled glass are also considered in this work where considerable energy is saved due to their low thermal conductivity. Based on the analysis of various studies and other factors considered in this paper, it is established that recycled glass materials can be accommodated in structural buildings, while continuous research is necessary to adapt waste glass to high pH value of Portland cement.

     

Combating land degradation through participatory means: the case of Swaziland

This paper examines a community grazing project to rehabilitate degraded land in Swaziland. Using data from interviews, questionnaires, and focus groups, we show that the ways in which participatory, decentralized approaches to natural resource management play out at the local level are closely linked to national-level power structures. The successes and issues that emerge at different stages of the grazing project reflect local socioeconomic priorities and show how people manage their time and labor according to household livelihood goals. However, the project favored the interests of cattle owners who were already the more socially and politically powerful members of the community. We argue that for participatory natural resource management to be more meaningful to communities, projects should focus on local ecological priorities, rather than addressing the environmental concerns that are rooted within existing dominant power structures. This requires change to social and political relationships across levels and the building of new institutions.     

污水土地处理技术研究的最新进展

本文以地下渗滤系统、慢速渗滤系统为例 ,介绍了污水土地处理技术研究的最新进展 ,指出加速污水土地处理技术产业化的进程必将大大促进我国的环境保护与生态建设工作 ,并带来巨大的环境、经济与社会效益。     

Reviewing biomimicry design case studies as a solution to sustainable design

There have been many studies on bio-inspired research, where biomimicry capabilities facilitating sustainable designs are in dearth. For a sustainable design, it is necessary to consider water efficiency, zero waste, thermal environment, and energy supply. This paper investigates how biomimicry is adopted in the sustainable design of buildings. A thorough content analysis of eight case studies focused on the built environment and how biomimicry integrated with the design of a building was executed. The selection of cases study was based on the concept of biomimicry by taking inspiration from nature and applying them in the everyday built environment. Thus, the building designs are more ecologically sustainable than conventional ones, where biomimicry approaches and principles are adopted. The findings suggest that the design of a building can inspire society with new ecological morals, where understanding of biological morphogenesis can inspire design to resolve challenges and essentially help create a healthy environment. Biomimicry harnesses and replicates the principles found in nature to create a built environment that benefits people and other living creatures and safeguards biodiversity. Thus, adopting biomimicry in designing a building will help to develop a culture of active environmental design.

     

Review of PCBs in US schools: a brief history,an estimate of the number of impacted schools,and an approach for evaluating indoor air samples

PCBs in building materials such as caulks and sealants are a largely unrecognized source of contamination in the building environment. Schools are of particular interest, as the period of extensive school construction (about 1950 to 1980) coincides with the time of greatest use of PCBs as plasticizers in building materials. In the USA, we estimate that the number of schools with PCB in building caulk ranges from 12,960 to 25,920 based upon the number of schools built in the time of PCB use and the proportion of buildings found to contain PCB caulk and sealants. Field and laboratory studies have demonstrated that PCBs from both interior and exterior caulking can be the source of elevated PCB air concentrations in these buildings, at levels that exceed health-based PCB exposure guidelines for building occupants. Air sampling in buildings containing PCB caulk has shown that the airborne PCB concentrations can be highly variable, even in repeat samples collected within a room. Sampling and data analysis strategies that recognize this variability can provide the basis for informed decision making about compliance with health-based exposure limits, even in cases where small numbers of samples are taken. The health risks posed by PCB exposures, particularly among children, mandate precautionary approaches to managing PCBs in building materials.     

International trade in meat: the tip of the pork chop

This paper provides an original account of global land, water, and nitrogen use in support of industrialized livestock production and trade, with emphasis on two of the fastest-growing sectors, pork and poultry. Our analysis focuses on trade in feed and animal products, using a new model that calculates the amount of "virtual" nitrogen, water, and land used in production but not embedded in the product. We show how key meat-importing countries, such as Japan, benefit from "virtual" trade in land, water, and nitrogen, and how key meat-exporting countries, such as Brazil, provide these resources without accounting for their true environmental cost. Results show that Japan's pig and chicken meat imports embody the virtual equivalent of 50% of Japan's total arable land, and half of Japan's virtual nitrogen total is lost in the US. Trade links with China are responsible for 15% of the virtual nitrogen left behind in Brazil due to feed and meat exports, and 20% of Brazil's area is used to grow soybean exports. The complexity of trade in meat, feed, water, and nitrogen is illustrated by the dual roles of the US and The Netherlands as both importers and exporters of meat. Mitigation of environmental damage from industrialized livestock production and trade depends on a combination of direct-pricing strategies, regulatory approaches, and use of best management practices. Our analysis indicates that increased water- and nitrogen-use efficiency and land conservation resulting from these measures could significantly reduce resource costs.     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Life Cycle Analyses and Resource Assessments

Prof. Ulgiati stresses that we should always use an ecosystem view when transforming energy from one form to another. Sustainable growth and development of both environmental and human-dominated systems require optimum use of available resources for maximum power output. We have to adapt to the laws of nature because nature has to take care of all the waste products we produce. The presentation addresses a much needed shift away from linear production and consumption pattern, toward reorganization of economies and lifestyle that takes complexity—of resources, of the environment and of the economy—into proper account. The best way to reach maximum yield from the different kinds of biomass is to use biorefineries. Biorefinery is defined as the sustainable processing of biomass into a spectrum of marketable products like heat, power, fuels, chemicals, food, feed, and materials. However, biomass from agricultural land must be used for the production of food and not fuel. Prof. Voss focuses on the sustainability of energy supply chains and energy systems. Life cycle analyses (LCA) provides the conceptual framework for a comprehensive comparative evaluation of energy supply options with regard to their resource requirements as well as the health and environmental impact. Full scope LCA considers not only the emissions from plant operation, construction, and decommissioning but also the environmental burdens and resource requirements associated with the entire lifetime of all relevant upstream and downstream processes within the energy chain. This article describes the results of LCA analyses for state-of-the-art heating and electricity systems as well as of advanced future systems. Total costs are used as a measure for the overall resource consumption.     

Evaluating carbon emissions of China’s waste management strategies for building refurbishment projects: contributing to a circular economy

This study evaluates carbon emissions of construction and demolition (C&D) waste generated by building refurbishment, using a life cycle assessment approach through a case study project in China. Three waste management scenarios were developed for a building refurbishment project in the city of Suzhou. Scenario 1 is under the business-as-usual C&D waste management practice in China; scenario 2 is based on the open-ended 3R strategy, which focuses on the downstream impact of waste; and scenario 3 considers both the upstream and downstream impact of waste. The results reveal that the composition of the waste generated from building refurbishment projects is different from construction and demolition projects. In the life cycle of C&D waste management of building refurbishment projects, the refurbishment material stage generates the highest carbon emissions compared to the dismantlement, refurbishment construction, and refurbishment material end of life stages. Scenario 1 produces higher carbon emissions than scenario 2, but the difference is not significant in the whole life cycle of the building refurbishment project, whereas carbon emissions for scenario 3 are significantly less than both scenario 1 and scenario 2. The study finds the reason for this difference is that scenario 1 and scenario 2 are based on a linear economy that relies on unsustainable demand for raw materials, whereas scenario 3 is based on a circular economy that uses upcycled materials to substitute for raw materials and considers waste management from a cradle to cradle perspective. This study fills a research gap by evaluating carbon emissions of different waste management strategies for building refurbishment projects, which are expected to be an increasing portion of overall construction activity in China for the foreseeable future.

     

Detection of ciliostatic activity in fungal growth on building materials

Varying ciliostatic activity was found in extracts of biomass from building materials inoculated with pure isolates of some molds previously isolated from buildings. Extracts from growth on materials composed of finely divided cellulose (plaster board and construction cardboard) were more active than those from growth on Rockwool. Extracts of biomass from all three materials demonstrated an activity greater than control samples. Based on the activity observed here, it is conceivable that the measurement of ciliostatic activity of biomass scraped from contaminated building materials could be useful for planning removal strategies.     

Short-term variations in ambient particulates and their sources in Taichung, Taiwan

Environmental assessment methods are generally based on mono-disciplinary approaches drawn from biophysical or social sciences. This paper discusses the use of hierarchy theory to represent ecological systems when building a cross-disciplinary environmental assessment methodology in which a variety of legitimate views are formally taken into account. A hierarchical approach is applied to the study of an environmental problem arising from conflicting water resource allocation requirements among different activities competing for this resource in an eastern Sicilian river basin (Italy). A second case study suggests the usefulness of hierarchy theory in analysing how a community perceives a natural resource and how the concept of natural heritage changes over time.     

From chemical risk assessment to environmental resources management: the challenge for mining

On top of significant improvements and progress made through science and engineering in the last century to increase efficiency and reduce impacts of mining to the environment, risk assessment has an important role to play in further reducing such impacts and preventing and mitigating risks. This paper reflects on how risk assessment can improve planning, monitoring and management in mining and mineral processing operations focusing on the importance of better understanding source–pathway–receptor linkages for all stages of mining. However, in light of the ever-growing consumption and demand for raw materials from mining, the need to manage environmental resources more sustainably is becoming increasingly important. The paper therefore assesses how mining can form an integral part of wider sustainable resources management, with the need for re-assessing the potential of mining in the context of sustainable management of natural capital, and with a renewed focus on its the role from a systems perspective. The need for understanding demand and pressure on resources, followed by appropriate pricing that is inclusive of all environmental costs, with new opportunities for mining in the wastes we generate, is also discussed. Findings demonstrate the need for a life cycle perspective in closing the loop between mining, production, consumption and waste generation as the way forward.     

Indoor air quality and health

During the last two decades there has been increasing concern within the scientific community over the effects of indoor air quality on health. Changes in building design devised to improve energy efficiency have meant that modern homes and offices are frequently more airtight than older structures. Furthermore, advances in construction technology have caused a much greater use of synthetic building materials. Whilst these improvements have led to more comfortable buildings with lower running costs, they also provide indoor environments in which contaminants are readily produced and may build up to much higher concentrations than are found outside. This article reviews our current understanding of the relationship between indoor air pollution and health. Indoor pollutants can emanate from a range of sources. The health impacts from indoor exposure to combustion products from heating, cooking, and the smoking of tobacco are examined. Also discussed are the symptoms associated with pollutants emitted from building materials. Of particular importance might be substances known as volatile organic compounds (VOCs), which arise from sources including paints, varnishes, solvents, and preservatives. Furthermore, if the structure of a building begins to deteriorate, exposure to asbestos may be an important risk factor for the chronic respiratory disease mesothelioma. The health effects of inhaled biological particles can be significant, as a large variety of biological materials are present in indoor environments. Their role in inducing illness through immune mechanisms, infectious processes, and direct toxicity is considered. Outdoor sources can be the main contributors to indoor concentrations of some contaminants. Of particular significance is Radon, the radioactive gas that arises from outside, yet only presents a serious health risk when found inside buildings. Radon and its decay products are now recognised as important indoor pollutants, and their effects are explored. This review also considers the phenomenon that has become known as Sick Building Syndrome (SBS), where the occupants of certain affected buildings repeatedly describe a complex range of vague and often subjective health complaints. These are often attributed to poor air quality. However, many cases of SBS provide a valuable insight into the problems faced by investigators attempting to establish causality. We know much less about the health risks from indoor air pollution than we do about those attributable to the contamination of outdoor air. This imbalance must be redressed by the provision of adequate funding, and the development of a strong commitment to action within both the public and private sectors. It is clear that meeting the challenges and resolving the uncertainties associated with air quality problems in the indoor environment will be a considerable undertaking.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

Optimizing the position of insulating materials in flat roofs exposed to sunshine to gain minimum heat into buildings under periodic heat transfer conditions

Building roofs are responsible for the huge heat gain in buildings. In the present work, an analysis of the influence of insulation location inside a flat roof exposed directly to the sun’s radiation was performed to reduce heat gain in buildings. The unsteady thermal response parameters of the building roof such as admittance, transmittance, decrement factor, and time lags have been investigated by solving a one-dimensional diffusion equation under convective periodic boundary conditions. Theoretical results of four types of walls were compared with the experimental results available in literature. The results reveal that the roof with insulation placed at the outer side and at the center plane of the roof is the most energy efficient from the lower decrement factor point of view and the roof with insulation placed at the center plane and the inner side of the roof is the best from the highest time lag point of view among the seven studied configurations. The composite roof with expanded polystyrene insulation located at the outer side and at the center plane of the roof is found to be the best roof from the lowest decrement factor (0.130) point of view, and the composite roof with resin-bonded mineral wool insulation located at the center plane and at the inner side of the roof is found to be energy efficient from the highest time lag point (9.33 h) of view among the seven configurations with five different insulation materials studied. The optimum fabric energy storage thicknesses of reinforced cement concrete, expanded polystyrene, foam glass, rock wool, rice husk, resin-bonded mineral wool, and cement plaster were computed. From the results, it is concluded that rock wool has the least optimum fabric energy storage thickness (0.114 m) among the seven studied building roof materials.     

Experimental and simulation study on bake-out with dilution ventilation technology for building materials

With recent improvements to living standards and renovations to many residential buildings, a large volume of new building materials have been utilized throughout China. Formaldehyde and other kinds of VOC pollutants, such as benzene, toluene and xylene found in new building materials, however, emit gases that may lead to some direct or potential health problems. Bake-out with dilution ventilation technology has the potential to shorten emission cycles of indoor air pollution, by which off-gassing from building materials can be reduced. In this paper, a test chamber was used to represent a newly renovated residential room in China. Experiments were conducted to study the applicability of the technology for removing of formaldehyde, benzene, toluene and xylene. A numerical method was used to simulate a 1 m3-chamber-TVOC removing amount under different operating conditions and the concentration change of TVOC during the bake-out exhaust dilution process. The effects of bake-out temperatures and times, ventilation times, and air change rates on removal are also discussed.

Implications: VOCs are the main study objective in this paper. With higher baking temperature, longer baking time and longer ventilation time, the removal efficiency is higher in experiment. Removal content of TVOC increases with the increasing number of ACH. With the consideration of energy consumption, it is more reasonable to choose a ventilation time of 4 hours if ACH is 1.2 times/h.     

项目决策阶段清洁生产分析方法的研究

企业在建设项目决策时就应该按照清洁生产的原则，从源头控制污染。提出了在项目决策中，应从产品选择、工艺路线选择、主要设备选型和节能降耗4个方面进行清洁生产的分析方法，通过此分析方法的应用，可以避免项目决策中的环境失误和降低企业的环境风险。