Accelerated delivery of polychlorinated biphenyls (PCBs) in recent sediments near a large seabird colony in Arctic Canada

Polychlorinated biphenyls (PCBs) were measured in sediment cores from ponds located near a large seabird colony at Cape Vera, Devon Island, Arctic Canada. Surface sediment PCB concentrations were ∼5× greater in seabird-affected sites relative to a nearby control pond and were correlated with independent indicators of seabird activity including, sedimentary δ¹⁵N and lakewater chlorophyll a and cadmium concentrations. PCB fluxes were amongst the highest recorded from the High Arctic, ranging from 290 to 2400 ng m⁻² yr⁻¹. Despite a widespread ban of PCBs in the mid-1970s, PCB accumulation rates in our cores increased, with the highest values recorded in the most recent sediments. Possible mechanisms for the recent PCB increases include a vertical flux step driven by seabird-delivered nutrients and/or delayed loading of PCBs from the catchment into the ponds. The high PCB levels recorded in the seabird-affected sites suggest that seabird colonies are exposing coastal ecosystems to elevated levels of contaminants.     

PCDD, PCDF, PCB and PBDE concentrations in breast milk of mothers residing in selected areas of Slovakia

The concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (dl-PCBs) and polybrominated diphenylethers (PBDEs) in 33 breast milk samples collected in 2006-2007 from primipara mothers close to four industrial areas of Slovak Republic were determined. The total PCDDs/PCDFs and dl-PCBs expressed as TEQ based on WHO TEFs 1998 in breast milk samples varied from 5.0 to 51.8 pg g⁻¹ fat (median: 13.1 pg g⁻¹ fat; mean: 18.0 pg g⁻¹ fat). The measurements of seven PBDE congeners (IUPAC No. 28, 47, 99, 100, 153, 154, and 183) were performed for the first time in human milk from Slovakia. PBDE levels ranged between 0.22 and 1.62 ng g⁻¹ fat, with median and mean value of 0.43 ng g⁻¹ fat and 0.57 ng g⁻¹ fat respectively. No statistically significant differences were observed between studied areas in total PBDE concentrations.Furthermore, this study presents first results concerning the daily intake (DI) of PCDDs/PCDFs and dioxin-like compounds for the most vulnerable breast-fed infant population in Slovakia. The total PCDD/PCDF and dl-PCB DI for an infant during the first 2 months of life was estimated in a range from 14.4 to 230 pg TEQ kg⁻¹ b.w., with a median value of 58.9 pg TEQ kg⁻¹ b.w.. The DI values substantially exceeded the tolerable daily intake (TDI) 1-4 pg TEQ kg⁻¹ b.w. recommended by WHO. The dietary infant intake concerning PBDEs was estimated to be between 0.69 and 7.1 ng kg⁻¹ b.w. d⁻¹, with median value of 1.7 ng kg⁻¹ b.w. d⁻¹.     

Analysis of dioxin-like compounds in vegetation and soil samples burned in Catalan forest fires. Comparison with the corresponding unburned material

Only a few data are reported about the formation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in forest fires. However, the inventories of sources undertaken by several European and American countries consider natural fires as a possible source of PCDD/F and, in some cases, as one of the most important. In our work we have analysed vegetation and soil samples burned in four forest fires which happened in Catalonia in the summer of 1998. The concentration of dioxin-like compounds (PCDD/F, non-ortho polychlorinated bi-phenyls (PCB) and mono-ortho PCB) has been compared to the concentration present in the corresponding unburned material collected in places near the fires but not affected. The results of this preliminary study show very low concentrations in all the samples, both burned and unburned. Although a change in the profile (proportional increase of tetrachlorinated congeners in PCDD/F) is observed in burned samples compared to unburned ones, the absolute values of concentration decrease in most samples. Therefore, natural fires seem not to be an important source of dioxin-like compounds. These results will be confirmed with air emissions measurements in future studies.     

Characteristics of sorption losses of polychlorinated biphenyl congeners onto glass surfaces

Sorption losses to glass surfaces of five polychlorinated biphenyl (PCB) congeners in aqueous solutions were investigated. Adsorption/desorption experiments were conducted under conditions that simulated actual sample handling procedures for environmental samples. It was found that the adsorption loss is related to the degree of chlorination. PCB congener 180 lost the most onto glass surfaces, followed by congeners 138, 101/28, and 52, in decreasing order. More PCB adsorption occurred onto glass under conditions of agitation and higher temperature (22°C) during the five-day experimental period. The salinity effect (“salting out effect”) was also observed in this work. The efficiency of desorption (rinsing three times with solvent) was found to be ineffective in extracting adsorbed PCBs. It was necessary to use mechanical shaking for extraction. Storage of samples up to five days resulted in sorption losses as much as 30%, 17%, 30%, 40%, and 55% of PCB 28, 52, 101, 138, and 180, respectively. Sorption losses need to be considered when conducting water sampling or toxicological studies to avoid underestimation of the actual PCB concentrations and their toxic effects.     

PCDDs, PCDFs, dioxin-like PCBs and indicator PCBs in soil from five selected areas in Slovakia

There is a lack of information regarding persistent organic pollutants (POPs) in soil from Slovakia. This paper reports the concentrations of 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), 12 dioxin-like polychlorinated biphenyls (dl-PCBs) and 6 indicator PCBs associated with 32 soil samples collected in 2007 from areas in the vicinity up to several kilometres from four selected industrial PCDD/F sources in Slovakia and one background area.The results show that the total WHO₁₉₉₈-PCDD/F/dl-PCB-TEQ concentrations varied from 0.34 to 18.05 pg g⁻¹ dry weight (dw) and the average total TEQ concentrations in samples collected at the Šala, Košice, Krompachy and Dubová areas were 3.18, 2.64, 7.80, and 3.19 pg g⁻¹ dw respectively. The average of the total WHO₁₉₉₈-TEQ values in three soil samples representing the background Starina area was 0.66 pg g⁻¹ dw. The predominant contaminants among 2,3,7,8-substituted PCDD/Fs, dl-PCB, and indicator PCBs was OCDD, PCB 118, and PCB 153 respectively. The major contributors to the TEQ were 2,3,4,7,8-PeCDF, PCB 126, 1,2,3,7,8-PeCDD, PCB 156 and 1,2,3,4,7,8-HxCDF + 1,2,3,4,7,9-HxCDF in descending order.     

Spatial character of polychlorinated biphenyls from soil and respirable particulate matter in Taiyuan, China

As one of China’s great metropolises, Taiyuan is affected by heavy chemical industry and manufacture of chemical products, and faces pollution from polychlorinated biphenyls (PCBs). Therefore, this study was conducted to determine the PCB concentrations in various environmental media in Taiyuan. We collected 15 soil samples, 34 respirable particulate matter (PM) samples (17 of PM_2.5 and 17 of PM₁₀) from urban areas of Taiyuan, and measured a total of 144 PCB congeners (including some coeluting PCB congeners). The total PCB concentrations were 51–4.7 × 10³ pg g⁻¹ in soil, 27–1.4 × 10² pg m⁻³ in PM_2.5 and 16–1.9 × 10² pg m⁻³ in PM₁₀. Of the PCB homologues, the dominant PCBs detected in the various media were all tri-CBs. Soil was relatively the most polluted media. Furthermore, principal-component analysis revealed that the major PCB source in Taiyuan may be associated with the main commercial PCB through long-range transmission. Toxic equivalency (TEQ) concentrations (based on ten dioxin-like PCBs) ranged from N.D. to 5.9 × 10⁻³ pg-WHO TEQ g⁻¹ in soil, 2.0 × 10⁻⁴–3.4 × 10⁻³ pg-WHO TEQ m⁻³ and 1.0 × 10⁻⁴–1.2 × 10⁻³ pg-WHO TEQ m⁻³ in PM_2.5 and PM₁₀, respectively. In previous studies, PCBs were not a severe component of contaminant in Taiyuan; however, this study suggested there is a potential threat of human exposure to PCBs for residents of Taiyuan.     

Polychlorinated biphenyls-containing electrical insulating oil contaminated soil treatment with calcium and magnesium peroxides

Calcium and magnesium peroxides were applied for the treatment of soil contaminated by polychlorinated biphenyls-containing electrical insulating oil (Aroclor 1016). The removal of PCB-containing electrical insulating oil was achieved with the addition of either calcium peroxide or magnesium peroxide alone and dependent on dosages of the chemical. A 21-d treatment of 60% watered soil with the moderate addition (chemical/oil weight ratio of 0.005/1) of either calcium peroxide or magnesium peroxide resulted in nearly complete (96 ± 2%) oil removal, unsubstantial increase in soil pH and almost no changes in oxygen consumption and dehydrogenase activity, making it suitable for the soil decontamination.     

Comparison of the concentrations of polychlorinated biphenyls and dioxins in mothers affected by the Yusho incident and their children

Accumulated maternal dioxins are passed onto the fetus and neonate via the placenta and maternal milk. In Japan in 1968, an accidental human exposure to rice oil contaminated with polychlorinated biphenyls (PCBs) and other dioxin-related compounds, such as polychlorinated dibenzofurans (PCDFs), led to development of Yusho oil disease. We investigated differences in blood dioxin concentrations in mother-children pairs affected by the Yusho incident. From 2002 to 2008, blood samples were collected from 26 pairs of Yusho mothers and their children (19 mothers, 26 children). Specific congeners of seven polychlorinated dibenzo-p-dioxins (PCDDs), ten PCDFs, and four non-ortho PCBs were analyzed. The children had significantly lower TEQ concentrations of PCDDs, PCDFs, and coplanar PCBs compared to their mothers. The mother-child difference in blood concentrations varied with the congeners; the largest for 2,3,4,7,8-pentaCDF and the smallest for 1,2,3,4,6,7,8-heptaCDD. The level for 2,3,4,7,8-pentaCDF, which characterizes Yusho oil disease, was approximately 17-30 times higher in the mothers than in the general population, whereas there were no significant differences between children in the formula-fed group and the general population. In contrast, the mean level for 2,3,4,7,8-pentaCDF in the breast-fed group was approximately 1.5 times, (range 0.5-6.5 times) higher than that in the general population. Over 30 years after the Yusho incident, the mean blood dioxin levels in the offspring were only a fraction of the levels in their mothers. This is more consistent with exposure via breast milk than via transplacental transfer in the Yusho incident.     

Accumulation of hydroxylated polychlorinated biphenyls (OH-PCBs) and implications for PCBs metabolic capacities in three porpoise species

The present study investigated polychlorinated biphenyls (PCBs) and hydroxylated metabolites of PCBs (OH-PCBs) in blood from three porpoise species: finless porpoises (Neophocaena phocaenoides), harbor porpoises (Phocoena phocoena), and Dall’s porpoises (Phocoenoides dalli). The porpoises were found stranded or were bycaught along the Japanese coast. Concentrations of OH-PCB were the highest in Dall’s porpoises (58 pg g⁻¹ wet wt), second highest in finless porpoises (20 pg g⁻¹ wet wt), and lowest in harbor porpoises (8.3 pg g⁻¹ wet wt). The concentrations in Dall’s porpoises were significantly higher than the concentrations in finless porpoises and harbor porpoises (p < 0.05 and p < 0.01, respectively). There was a positive correlation between PCB and OH-PCB concentrations (r = 0.67, p < 0.001), suggesting the possible concentration-dependent induction of CYP enzymes. The three porpoise species may have exceptionally low metabolic capacities compared with other marine and terrestrial mammals, because low OH-PCB/PCB concentration ratios were found, which were 0.0016 for Dall’s porpoises, 0.0013 for harbor porpoises, and 0.00058 for finless porpoises. Distinct differences in the OH-PCB congener patterns were observed for the three species, even though they are taxonomically closely related.     

Reductive dechlorination for remediation of polychlorinated biphenyls

Technologies such as thermal, oxidative, reductive, and microbial methods for the remediation of polychlorinated biphenyls (PCBs) have previously been reviewed. Based on energy consumption, formation of PCDD/F, and remediation efficiency, reductive methods have emerged as being advantageous for remediation of PCBs. However, many new developments in this field have not been systematically reviewed. Therefore, reductive technologies published in the last decade related to remediation of PCBs will be reviewed here. Three categories, including catalytic hydrodechlorination with H₂, Fe-based reductive dechlorination, and other reductive dechlorination methods (e.g., hydrogen-transfer dechlorination, base-catalyzed dechlorination, and sodium dispersion) are specifically reviewed. In addition, the advantages of each remediation technology are discussed. In this review, 108 articles are referenced.     

The variability of polychlorinated biphenyls levels in urban soils from five European cities

The concentration of PCBs in topsoils from five European cities was assessed and the highest levels were found in Glasgow (Scotland), followed by Torino (Italy), Aveiro (Portugal), Ljubljana (Slovenia) and Uppsala (Sweden). All cities showed the presence of local sources in addition to diffuse contamination from global atmospheric transport. The association of general soil parameters with PCBs in Glasgow and with heavier congeners in Torino and Ljubljana indicates that retention of these compounds is occurring. The profiles obtained resemble Aroclor 1254 and 1260, which are important local sources. Nevertheless, differences in PCB profiles were observed among cities, due to the combined effects of the age of the contamination (which determines the time available for volatilisation and degradation), different sources of PCBs and differences in climate (which influence volatilisation and deposition).     

Assessing the human health effects of PCBs

Toxic effects can be induced in experimental animals by high doses of pure PCBs, and in man by PCDF-contaminated PCB. In order to assess the effects of ordinary, uncontaminated PCB on man, a group of capacitor workers who had direct occupational exposure to Aroclors 1254, 1242, and 1016 during the period 1946 to 1977 has been under medical surveillance since 1976. This group presented some indications of non-AhR-mediated microsomal enzyme induction during the period of direct exposure, but no chloracne or increased cancer mortality. Multiple regression studies revealed no significant associations between lipid PCB levels and clinical indicators of hepatotoxicity, hypertension, or pulmonary impairment.     

Influence of activated carbon amendment on the accumulation and elimination of PCBs in the earthworm Eisenia fetida

In this study we investigated the use of activated carbon (AC) as a soil amendment for reducing bioavailability of polychlorinated biphenyls (PCBs) to the earthworm Eisenia fetida. Artificial soil was contaminated with PCBs and used in bioaccumulation experiments fresh or after aging for 19 months. PCB bioaccumulation in earthworms was reduced by 68% when AC was placed as a layer without mixing and by 94% when AC was manually mixed into the soil. Aging of the same AC mixed soil for 19 months resulted in an overall reduction of 99% in PCB biouptake. AC-treated aged soil also showed two orders of magnitude lower equilibrium aqueous concentrations of PCBs compared to untreated aged soils. The findings from this study indicate that application of engineered sorbents like AC to PCB impacted soils may greatly reduce PCB uptake at the base of the terrestrial food chain.     

Polychlorinated biphenyls in surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in East China Sea

The spatial distribution and source of polychlorinated biphenyls (PCBs) in 30 surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in Eastern China were analysed. Total concentrations of PCBs ranged from 9.33 to 19.60 ng g⁻¹ dry weight for all the sampling stations. The observed PCB levels were lower than those in areas of high urbanisation or contamination in the bay. Low-chlorinated PCBs, dominated by tri-PCB, were identified as the prevalent contaminate of surface sediments, and the top three PCB congeners were lighter chlorinated congeners (PCB 8, PCB 18 and PCB 28). These results were in agreement with the fact that tri-PCB compounds are the dominant contaminants in China. The result of the principal component analysis revealed that all samples were similar in composition to Aroclor 1242, suggesting they might originate from electrical capacitors and transformers. The levels of PCBs were significantly correlated with the total organic carbon in the sediments.