The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: An overview

The timber manufacturing and power generation industry is gradually shifting towards the use of biomass such as timber processing waste for fuel and energy production and to help supplement the electrical energy demand of national electric gridlines. Though timber processing waste is a sustainable and renewable source of fuel for energy production, the thermal process of converting the aforementioned biomass into heat energy produces significant amounts of fine wood waste ash as a by-product material which, if not managed properly, may result in serious environmental and health problems. Several current researches had been carried out to incorporate wood waste ash as a cement replacement material in the production of greener concrete material and also as a sustainable means of disposal for wood waste ash. Results of the researches have indicated that wood waste ash can be effectively used as a cement replacement material for the production of structural grade concrete of acceptable strength and durability performances. This paper presents an overview of the work carried out by the use of wood waste ash as a partial replacement of cement in mortar and concrete mixes. Several aspects such as the physical and chemical properties of wood waste ash, properties of wood waste ash/OPC blended cement pastes, rheological, mechanical and the durability properties of wood waste ash/OPC concrete mix are detailed in this paper.     

Utilization of washed MSWI fly ash as partial cement substitute with the addition of dithiocarbamic chelate

The management of the big amount of fly ash as hazardous waste from the municipal solid waste incinerator (MSWI) has encountered many problems in China. In this study, a feasibility research on MSWI fly ash utilization as partial cement substitute in cement mortars was therefore carried out. MSWI fly ash was subjected to washing process to reduce its chlorine content (from 10.16% to 1.28%). Consequently, it was used in cement mortars. Ten percent and 20% replacement of cement by washed ash showed acceptable strength properties. In TCLP and 180-day monolithic tests, the mortars with washed ash presented a little stronger heavy metal leachability, but this fell to the blank level (mortar without washed ash) with the addition of 0.25% chelate. Therefore, this method is proposed as an environment-friendly technology to achieve a satisfactory solution for MSWI fly ash management.     

酞菁绿染料排放废渣的处理技术

酞菁绿废渣中含有较多的铝化合物和少量的铜化合物及染料残渣,本文采用H2SO4除Ca2^ 、Al灰除Cu^2 或NaOH浸取Al^3 的反应条件和工艺过程,制得Al(OH)3产品,并进一步合成性能优良的聚合铝产品。废渣经处理后不仅回收了利用价值较高的铝,取得了一定的经济效益,同时不产生二次污染,也取得了明显的环境效益。     

Management of old landfills by utilizing forest and energy industry waste flows

The lack of landfill capacity, forthcoming EU waste disposal and landfill management legislation and the use of non-renewable and energy intensive natural resources for the end-treatment of old landfills increase pressures to develop new landfill management methods. This paper considers a method for the end-management of old landfills in Finland, which is based on the utilization of forest and paper industry waste flows, wastes from paper recycling (de-inking) and wastes from forest industry energy production. Fibre clay wastes from paper mills, de-inking sludges from de-inking of recovered waste paper and incineration ash from forest industry power plants serve to substitute the use of natural clay for the building of landfill structures for closed landfills. Arguably, this method is preferable to existing practices of natural clay use for landfill building, because it (1) substitutes non-renewable natural clay, (2) consumes less energy and generates less CO2 emissions than the use of natural clay, and (3) eliminates considerable amounts of wastes from paper production, paper consumption and from forest industry energy production. Some difficulties in the application of the method are considered and the waste flow utilization is incorporated into a local forest industry recycling network.     

Study on assessment of slope stability and mixed disposal of overburden in voids of Singrauli Coalfield

The mining industry can be considered the backbone of the Indian economy as well as facilitating the power that drives most of the other industries in the company. The overburden and waste rocks produced during coal mining are major concerns in regard to the amount of land that is required for their disposal, as well as the stability of dumps for these materials, which are of increasing height. Land reclamation issues are also a concern. In this work the adverse impacts caused by the dumping of overburden on land and acidic mine water on water bodies is discussed. Remote sensing tools were used along with the laboratory experimentation to assess the various impacts. This study also shows that silt released from waste dumps, can affected the angle of repose of the overburden dump slope. The angle of repose of the overburden materials varies with particle size composition. Thus, use of in‐pit crushers in large opencast mining operations can effectively reduce the area locked under the waste dumps. The acid neutralization potential of fly ash and overburden for the treatment of acid water was tested in the laboratory by using fly ash and waste rock materials on acidic coalfield water. The results are encouraging, and fly ash may prove to be a good acid neutralizer when used in conjunction of coal overburden material.     

垃圾焚烧飞灰处置与资源化利用研究进展

随着生活垃圾焚烧处理方式的不断推广,焚烧飞灰的产生量也不断增加。按照我国固体废物分类方法,焚烧飞灰属于危险废物,必须进一步处置才能进入填埋场或资源化利用。本文分析了飞灰物理化学特性,论述了常规处置技术（水泥固化、化学药剂稳定化、酸溶剂提取和熔融固化等）存在的问题。将原始飞灰直接应用于水泥、混凝土或路基材料,飞灰中高含量的重金属和盐类会产生新的环境问题。飞灰水洗可以高效去除其中的可溶性盐类,水洗飞灰在焙烧后重金属的浸出浓度远低于原始飞灰烧结后的相应浓度,飞灰水洗-焙烧技术具有很好的应用前景。     

利用粉煤灰处理采油废水的研究

利用电厂粉煤灰及灰场氧化塘对现河首站采油废水中的污染物进行吸附和生化处理试验。试验结果表明:粉煤灰具有类似活性炭的结构和比表面积,对废水中的石油类、COD、氨氮、挥发酚等污染物具有较强的吸附、沉降和过滤作用。     

Methane production during storage of anaerobically digested municipal organic waste

Anaerobic digestion of source-separated municipal organic waste is considered feasible in Denmark. The limited hydraulic retention in the biogas reactor (typically 15 d) does not allow full degradation of the organic waste. Storage of anaerobically digested municipal organic waste can therefore be a source of methane (CH4) emission that may contribute significantly to the potential global warming impact from the waste treatment system. This study provides a model for quantifying the CH4 production from stored co-digested municipal organic waste and estimates the production under typical Danish climatic conditions, thus quantifying the potential global warming impact from storage of the digested municipal organic waste before its use on agricultural land. Laboratory batch tests on CH4 production as well as temperature measurements in eight full-scale storage tanks provided data for developing a model estimating the CH4 production in storage tanks containing digested municipal organic waste. The temperatures measured in separate storage tanks on farms receiving digested slurry were linearly correlated with air temperature. In storage tanks receiving slurry directly from biogas reactors, significantly higher temperatures were measured due to the high temperatures of the effluent from the reactor. Storage tanks on Danish farms are typically emptied in April and have a constant inflow of digested material. During the warmest months the content of digested material is therefore low, which limits the yearly CH4 production from storage.     

粉煤灰改性吸附材料的研究

本文阐述了粉煤灰的主要化学成份、结构、物理性质，指出粉煤灰改性的物质基础，并结合笔者的研究情况，分析了改性粉煤灰处理废水和废气的机理，介绍了其在处理废水和废气的研究与应用情况，提出了应用改性粉煤灰处理废水和废气中存在的问题及今后研究的重点。     

Bermudagrass sod growth and metal uptake in coal combustion by-product-amended media

Coal combustion by-products (CCB) include fly ash and bottom ash and are generated nationally at rates of 10(8) Mg yr(-1). Land applications of CCB have improved physicochemical properties of soil, yet inherent bulkiness and trace metal content of CCB often limit their use. Likewise, utilization of biosolids and manure as fertilizer can be problematic due to unfavorable nutrient ratios. A 2-yr field study evaluated environmental and technical parameters associated with CCB-organic waste utilization as growth media in turfgrass sod production. Experimental growth media formulated with CCB and organic waste and a sand-compost control mixture were uniformly spread at rates from 200 to 400 m3 ha(-1) and sprigged with hybrid bermudagrass [Cynodon dactylon (L.) Pers. x C. transvaalensis Burtt-Davy]. Leaf clippings were collected and analyzed for total elemental content each year. In Year 2, growth media samples were collected during establishment 47 and 84 days after planting (DAP) and viable Escherichia coli organisms were quantified. At harvest (99 or 114 DAP), sod biomass and physicochemical properties of the growth media were measured. During sod propagation, micronutrient and metal content in leaf clippings varied by growth media and time. After 47 d of typical sod field management, viable E. coli pathogens were detected in only one biosolids-amended plot. No viable E. coli were measured at 84 DAP. In both years, sod biomass was greatest in media containing biosolids and fly ash. Following installation of sod, evaluations did not reveal differences by media type or application volume. Using CCB-organic waste mixes at the rates described herein is a rapid and environmentally safe method of bermudagrass sod production.     

含油污水中固体废物固化与燃煤混烧的可行性

在含油污水处理过程中易产生含油污泥、活性污泥及浮渣等固体废物,利用传统的焚烧法、分离法、填埋法、生物降解法处理这些废物具有一定的缺陷和局限性。为了利用这些废物中的油及有机质的潜在能量,大庆炼化公司对固体废物进行了脱水固化试验。结果表明,脱水后的废物可以达到较好的固化状态,并具有一定的热值。固化废物经粉碎处理后,可按一定比例与燃煤混烧。在正常生产状况下,热电厂可保证混合燃烧的效果,其总体热值不会降低。混烧后的灰渣和炉渣可作为水泥厂的原料。该方法有利于环境保护,但其工业化生产可行性有待于进一步证实。     

Tributary Plunging in an Urban Lake (Onondaga Lake): Drivers,Signatures, and Implications1

Abstract: A combination of long‐term fixed‐frequency and robotic monitoring information for a polluted urban lake, Onondaga Lake, New York, and two of its tributaries is used to resolve the propensity for, and occurrences of, tributary plunging. Cooler temperatures (T) and higher salinity (S) are primarily responsible for the elevated density and plunging of one of these polluted streams for the summer through early fall interval. In‐lake transport of this plunging tributary, which receives inputs from combined sewer overflows (CSOs), is tracked by its high S during dry weather, its high turbidity (T_n) with associated lower S (dilution with rainwater) following runoff events, and by its characteristic ionic composition. These signatures are documented extending from the creek mouth, through a connecting navigation channel, through the inflow zone of the lake, and into metalimnetic depths of pelagic portions of the lake. The entry of this polluted tributary below the depth interval(s) of primary production and contact recreation has important implications for the ongoing major rehabilitation program for this lake. The plunging phenomenon diminishes the benefits previously expected for related features of the lake’s water quality from ongoing management efforts to abate CSO inputs and reduce nonpoint nutrient loading from the tributary. Previously this tributary tended to instead enter the upper layers of the lake during the operation of an adjoining soda ash manufacturing facility (closure in 1986), as a result of high lake S caused by the industry’s ionic waste discharge.     

湿式除尘器的应用研究

新疆油田公司供热公司为提高除尘效率,减少SO_2排放量,将多管除尘器改造为湿式除尘器,介绍了湿式除尘器的结构和除尘原理。针对存在的问题,通过改进溢流箱结构解决了水位控制问题,烟气含尘量和SO_2排放量均达到GB 13271—2001《锅炉大气污染物排放标准》。介绍了利用纯碱、电石渣、锅炉的冲渣水与除尘器流出的冲灰水混合这三种烟气脱硫方法,其中,锅炉的冲渣水与除尘器流出的冲灰水混合的烟气脱硫方法综合效果最好。     

PHOSPHATE IN WATERS: II. PLANT AVAILABILITY OF LIGNITE FLY ASH EXTRACTED FORMS IN GREENHOUSE TRIALS1

ABSTRACT: Orthophosphate P was removed from municipal waste water, lake waters, and P-spiked solutions by contact with fly ash from lignite burning electric power generating plants. The recovered ash was increased in total P content 3-fold, and Bray No. 1 soluble P, 9-fold. Phosphorus enriched ash so prepared was used in greenhouse trials with sand or soil as the major substrate material. Recovery of added P by barley plants ranged from 3 to 26 percent in the sand cultures and from 2 to 17 percent for soil cultures. Phosphorus contained in normal ash was partially available to barley under the conditions of these experiments. High B and the pozzolanic effect induced by ash reduced plant growth significantly.     

Valorization of solid waste in sugar factories with possible applications in India : A review

Sugar production is a major agro-based industry in India that generates various solid wastes viz. sugarcane trash, bagasse, press mud and bagasse fly ash. This work examines the state-of-the-art in innovative value added products that can be obtained from the transformation of these wastes. Challenges in implementing these waste valorization solutions are also highlighted. It is observed that the extent of research and adoption of these solutions vary considerably. Both industry involvement as well as government encouragement is required in translating the research findings into commercial products.     

Life cycle indicators for monitoring the environmental performance of European waste management

As widely recognised by EU legislation, Life Cycle Thinking (LCT) is a viable approach to support sound waste management choices. In this context, the Institute for Environment and Sustainability (IES) of the European Commission Joint Research Centre (JRC) has lead the development of macro-level, life cycle based waste management indicators to quantify and monitor the potential environmental impacts, benefits, and improvements associated with the management of a number of selected waste streams generated and treated in Europe.The waste management indicators developed make use of a combination of macro statistical waste management data combined with emissions/resource life cycle data for the different elements of the waste treatment chain. Indicators were initially calculated for the entire European Union (EU-27) and for Germany, covering several waste streams and a broad range of environmental impact categories.An indicator developed for a given waste stream captures the potential environmental impact associated with the generation and management of that waste stream. The entire waste management chain is considered, i.e. from generation to final treatment/disposal. Therefore, system boundaries for the selected waste streams include also the treatment or recycling of secondary waste (e.g. bottom ash from the incineration of household waste), and secondary products (e.g. recovered paper), as well as energy recovery.The experiences from the development of these life cycle based waste management indicators suggest that more detailed and quality-assured waste statistics are needed, especially covering the many different treatment operations and options. Also, it would be beneficial if waste statistics had a higher disaggregation level of waste categories, as well as more detailed information about waste composition. A further development of the indicators should include an increased number of waste streams, as well as calculation of the results for all Member States.     

Biogas production from pistachio (Pistaciavera L.) de-hulling waste

Pistachio processing wastes create significant waste management problems unless properly managed. However, there are not well-established methods to manage the waste generated during the processing of pistachios. Anaerobic digestion can be an attractive option not only for the management of pistachio processing wastes but also producing renewable energy in the form of biogas. This study investigated anaerobic digestibility and biogas production potential of pistachio de-hulling waste from wet de-hulling process. Best to our knowledge, this is the first report on biogas production from pistachio de-hulling waste. The results indicated that (1) anaerobic digestion of pistachio de-hulling wastewater, solid waste, and their mixtures in different ratios is possible with varying levels of performance; (2) 1 L of de-hulling wastewater (chemical oxygen demand concentration of 30 g/L) produced 0.7 L of methane; (3) 1 L of de-hulling wastewater and 20 g of pistachio de-hulling solid waste produced 1.25 L of methane; and (4) 1 g of de-hulling solid waste produced 62.6 mL of methane (or 134 mL of biogas).     

Assessment OF SURFACE WATER QUALITY at Large Watershed Scale: Land‐Use,Anthropogenic, and Administrative Impacts

Understanding the impacts that influence water quality is critical to the development of best management practices at the large watershed scale. This study describes the spatiotemporal variation in surface water quality and identifies their main impact in the Haihe River basin, China. Multivariate statistical techniques are applied to analyze the similarities among the sampling sites and to identify the main pollution sources in surface water. Results show that: (1) the basin can be clustered into two regions, water quality being better in the mountainous vs. plain regions; (2) water quality improves due to implementation of a strict state policy on environmental pollution control, prodded by the hosting of the Olympic games in the cities of Beijing and Tianjin; and (3) agricultural and residential land uses as well as livestock‐breeding are the main sources affecting water quality in the mountainous regions, whereas rural waste discharge — including domestic waste sewage, human and animal feces, and solid waste — significantly influences water quality in the plain regions. The waste discharge of industrial factories may be a significant source of water pollution in the plain regions. Results indicate that the environmental management from pollution sinks and sources, long‐lasting legal framework, and adequate economic incentives should be improved to optimize the large‐scale watershed management under the background of the rapid development of countries like China.     

利用粉煤灰制作新型建筑材料

粉煤灰不仅占用大量耕地,而且严重污染环境。针对东营地区粉煤灰的产生现状,积极开发粉煤灰的废物利用。通过对粉煤灰生产空心砌块的原料配比和生产工艺实施的调查,结果表明,利用粉煤灰生产新型建筑材料是减少占地和建材工业征地的有效途径,能变废为宝、化害为利,达到保护环境的目的。     

Cement replacement by sugar cane bagasse ash: CO2 emissions reduction and potential for carbon credits

This paper presents a study of cement replacement by sugar cane bagasse ash (SCBA) in industrial scale aiming to reduce the CO₂ emissions into the atmosphere. SCBA is a by-product of the sugar/ethanol agro-industry abundantly available in some regions of the world and has cementitious properties indicating that it can be used together with cement. Recent comprehensive research developed at the Federal University of Rio de Janeiro/Brazil has demonstrated that SCBA maintains, or even improves, the mechanical and durability properties of cement-based materials such as mortars and concretes. Brazil is the world’s largest sugar cane producer and being a developing country can claim carbon credits. A simulation was carried out to estimate the potential of CO₂ emission reductions and the viability to issue certified emission reduction (CER) credits. The simulation was developed within the framework of the methodology established by the United Nations Framework Convention on Climate Change (UNFCCC) for the Clean Development Mechanism (CDM). The State of São Paulo (Brazil) was chosen for this case study because it concentrates about 60% of the national sugar cane and ash production together with an important concentration of cement factories. Since one of the key variables to estimate the CO₂ emissions is the average distance between sugar cane/ethanol factories and the cement plants, a genetic algorithm was developed to solve this optimization problem. The results indicated that SCBA blended cement reduces CO₂ emissions, which qualifies this product for CDM projects.