White birch (Betula papyrifera Marshall) foliar litter decomposition in relation to trace metal atmospheric inputs at metal-contaminated and uncontaminated sites near Sudbury, Ontario and Rouyn-Noranda, Quebec, Canada

Decomposition of white birch (Betula papyrifera Marshall) foliar litter was examined at metal-contaminated and uncontaminated sites established along gradients of soil Cu, Ni, Pb and Zn concentrations near Sudbury, Ontario and Rouyn-Noranda, Quebec. Over an 18-month study period, a significantly lower rate of litter mass loss was observed at the Sudbury contaminated site (S1) than at the uncontaminated site (S2). This result was not duplicated at corresponding sites (RN1, RN2) in Rouyn-Noranda, despite similar levels of soil metal contaminants and atmospheric inputs. Concentrations of metals in litter increased at all sites with time. However, the greatest litter Cu and Ni concentrations were observed at S1 (188 and 192 microg/g, respectively), a result of substantial net gains of these elements from atmospheric inputs. On a per hectare basis, Cu accumulation in litter at S1 approached recommended application rates of Cu as copper sulphate for control of fungal diseases in agricultural operations, indicating that the current rate of Cu smelter emissions in Sudbury may cause the observed impairment of decomposition.     

Is metal extraction by Arabidopsis halleri related to exchangeable metal rates in soils amended with different metal-bearing solids?

Metals are associated to various constituents in polluted soils, and their availability is closely related to their chemical speciation. Studies on relations between metal extraction efficiency by hyperaccumulators and location of metals with respect to soil constituents are scarce. In this study. we investigate the relationship between metal extraction by Arabidopsis halleri and the exchangeable metals from substrates amended with various metal-bearing solids collected in the vicinity of a Zn smelter complex. These consisted of fresh and decomposing organic matter, the soil clay fraction, and two types of waste slags. ZnSO4 was also used as metal-bearing solid. Each was mixed with an unpolluted soil to produce two types of substrate, one moderately polluted and the other highly polluted. Total Zinc, Cd, Cu, and Pb were measured in substrates and in roots and shoots of A. halleri. Analysis of 0.01 M CaCl2 exchangeable metals in each substrate was performed before and after plant growth. The results showed different concentrations of exchangeable metals after plant growth, depending on the nature of the metal-bearing solids. In the ZnSO4 soil substrate, the proportion of exchangeable Zn decreased after plant growth, whilst it increased significantly on substrates amended with the two waste slags. For the other substrates, exchangeable Zn was not significantly different before and after plant growth. The same trend was observed for Cd. In the case of Cu, exchangeable rates increased in all substrates. The results were discussed according to the characteristics of the metal-bearing solids and to the metal-uptake strategy of A. halleri.     

Heavy metals in birch leaves around a nickel-copper smelter at Monchegorsk, northwestern Russia

Concentrations of metals in birch leaves were measured around the Severonikel smelter at Monchegorsk, Kola Peninsula, northwestern Russia, between 1991 and 1994. Concentrations of Ni, Cu and Fe near the smelter were 6-12 times higher than the recent regional background concentrations, while concentrations of Mn and Zn were 5-10 and 1.5-2 times lower, respectively. The regional background concentrations of Ni and Cu have increased 3-5 times during the last 20 years. Foliage concentrations of micronutrients (Zn and Mn) showed less annual variation than Ni and Cu. Contamination changed more sharply along the northeastern gradient than along the southern one. Subalpine birch forests were significantly less affected by Ni and Cu than lowland forests, but the lower concentration of Mn indicated a greater impact of SO(2) in mountainous regions. Although birch accumulated relatively less pollutants than conifers, birch resistance to pollution makes it a possible indicator in environmental studies since it survives even within the wastelands where conifers have vanished.     

Transfer of cadmium, lead, and zinc from industrially contaminated soil to crop plants: a field study

The documeneed adverse health effects of soil Cd and Pb have led to public concern over soil contamination with metals. A 4-year field experiment was conducted to study the transfer of Cd, Pb, and Zn from soil contaminated by smelter flue-dust to crop plants grown in a rotation. The soil was amended with Pb?Zn smelter flue-dust (2-66.8 kg per 10 m(2) plot) to simulate the long-term effect that the smelting of non-ferrous metal ore has on arable soils. The treated soil became strongly contaminated with metals (Cd 3.2-106 mg/kg, Pb 146-3452 mg/kg, Zn 465-11 375 mg/kg). Concentrations of Cd, Pb, and Zn in barley grain, barley straw meadow bluegrass, red clover, and potatoes were generally low. The highest metal concentrations were found in potato tubers (intact), meadow bluegrass, and barley straw. The observed reduction in crop yield was probably the result of possible nutrient imbalances rather than of metal (Zn, Cu) phytotoxicities. Zn and Cd uptake by the plants can be described by the saturation (plateau) model (y = ax(b), b < 1). The relationship between Pb in the soil and plants was linear with an extremely low slope (0.0001-0.0003). No excessive dietary intake of Cd is expected when Cd concentrations in barley grain and potato tubers grown on the contaminated soil are not higher than 0.6 and 1.0 mg/kg, respectively. Based on the risk analysis and taking into account the saturation model of the soil-plant metal relationship, it was concluded that, under the conditions of this experiment (neutral soil pH), soil with Cd concentrations of up to 30 mg/kg is still safe for production of these crop plants.     

Strategies of heavy metal uptake by three plant species growing near a metal smelter

Some higher plant species have developed heavy metal tolerance strategies which enable them to survive and reproduce in highly metal-contaminated soils. We have investigated such heavy metal uptake and accumulation strategies of two absolute metallophyte species (Armeria maritima ssp. halleri and Cardaminopsis halleri) and one pseudometallophyte (Agrostis tenuis) growing near a former metal smelter. Samples of plant parts and soil were analysed for Zn, Cd, Pb, and Cu. In soil, there were two dominant types of metal concentration gradients with depth. Under the absolute metallophytes, extremely high metal contents were measured in the surficial Ah horizon, followed by a strong decrease in the underlying soil horizons (L(11) and L(12)). Under the pseudometallophyte, metal concentrations in the Ah horizon were much lower and fewer differences were observed in metal concentrations among the Ah, L(11), and L(12) horizons. The concentrations of Zn, Cd, Pb, and Cu in Agrostis tenuis roots were greater than concentrations in leaves, indicating significant metal immobilisation by the roots. For C. halleri, Zn and Cd concentrations in leaves were >20,000 and >100 mg kg(-1), respectively, indicating hyperaccumulation of these elements. Armeria maritima ssp. halleri exhibited root concentrations of Pb and Cu that were 20 and 88 times greater, respectively, than those in green leaves, suggesting an exclusion strategy by metal immobilisation in roots. However, Zn, Cd, Pb, and Cu concentrations in brown leaves of Armeria maritima ssp. halleri were 3-8 times greater than in green leaves, suggesting a second strategy, i.e. detoxification mechanism by leaf fall.     

Budburst phenology of white birch in industrially polluted areas

Effects of environmental contamination on plant seasonal development have only rarely been properly documented. Monitoring of leaf growth in mountain birch, Betula pubescens subsp. czerepanovii, around a nickel-copper smelter at Monchegorsk hinted advanced budburst phenology in most polluted sites. However, under laboratory conditions budburst of birch twigs cut in late winter from trees naturally growing around three point polluters (nickel-copper smelter at Monchegorsk, aluminium factory at Kandalaksha, and iron pellet plant at Kostomuksha) showed no relationship with distance from the emission source. In a greenhouse experiment, budburst phenology of mountain birch seedlings grown in unpolluted soil did not depend on seedling origin (from heavily polluted vs. clean sites), whereas seedlings in metal-contaminated soil demonstrated delayed budburst. These results allow to attribute advanced budburst phenology of white birch in severely polluted sites to modified microclimate, rather than to pollution impact on plant physiology or genetics.     

Sources of variation in concentrations of nickel and copper in mountain birch foliage near a nickel-copper smelter at Monchegorsk, north-western Russia: results of long-term monitoring

Concentrations of nickel and copper, two principal metal pollutants of the 'Severonikel' smelter at Monchegorsk, NW Russia, were measured in unwashed leaves of mountain birch, Betula pubescens subsp. czerepanovii, collected in eight study sites along the pollution gradient during 1991-2003. In spite of significant decline in metal emissions, concentrations of foliar metals in most of the study sites did not decrease, indicating that soil contamination remains extremely high. Multiyear mean values peaked at 6.6 km S of the smelter, where they were 20-25 times higher than in the most distant study site. Concentrations of both metals demonstrated pronounced annual variation, which was explained by the meteorological conditions of early summer: higher precipitation in May increased foliar concentrations of both metals, whereas higher precipitation in June resulted in lower foliar concentrations of nickel. These data suggest that ecotoxicological situation in metal-contaminated areas can be modified by the expected climate change. In heavily polluted sites individual birch trees generally retained their ranks in terms of metal contamination during 1995-2003, demonstrating that the use of the same set of trees can significantly increase the accuracy of the monitoring data.     

Indication of airborne pollution by birch and spruce in the vicinity of copper smelter

The aim of the study was determination of air pollution impact of the copper smelter in Bor and its surroundings (Serbia) by assessing the suitability of birch (Betula pendula Roth.) and spruce (Picea abies L.) for the purposes of biomonitoring and comparing it with previously published data from the same study area. The concentrations of Cu, Zn, Pb and Mn in leaves/needles, branches, roots and soil were determined. Sampling was performed during 2009 in two zones with high load of air pollution due to copper mining and smelting activities, and one background zone. Metal accumulation and translocation was evaluated in terms of biological factors. In addition, plant enrichment factor was calculated. According to the results, plant foliage was not enriched through soil, which indicates absorption from the air, with both species acting as excluders of Cu, Pb, Zn and Mn. Leaves were more enriched with all the metals than needles, indicating a better response of birch to airborne pollution than spruce. Cluster analysis showed different level of pollution at the sites, while correlations between Cu and Pb obtained by Principal Component Analysis indicated their anthropogenic origin. Regarding previously published results, beside birch leaves, pine needles (which showed higher level of response to pollution compared to linden leaves) could be applied in air biomonitoring surveys near copper smelters.     

Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load.     

Effects of past sewage sludge additions on heavy metal availability in light textured soils: implications for crop yields and metal uptakes

The effect of heavy metal additions in past sewage sludge applications on soil metal availability and the growth and yield of crops was evaluated at two sites in the UK. At Gleadthorpe, sewage sludges enriched with salts of zinc (Zn), copper (Cu) and nickel (Ni) had been applied to a loamy sand in 1982 and additionally naturally contaminated Zn and Cu sludge cakes in 1986. At Rosemaund, sewage sludges naturally contaminated with Zn, Cu, Ni and chromium (Cr) had been applied in 1968-1971 to a sandy loam. From 1994 to 1997, the yields of both cereals and legumes at Gleadthorpe were up to 3 t/ha lower than the no-sludge control where total topsoil Zn and Cu concentrations exceeded 200 and 120 mg/kg, respectively, but only when topsoil ammonium nitrate extractable metal levels also exceeded 40 mg/kg Zn and 0.9 mg/kg Cu. At Rosemaund, yields were only decreased where total topsoil Cu concentrations exceeded 220 mg/kg or 0.7 mg/kg ammonium nitrate extractable Cu. These results demonstrate the importance of measuring extractable as well as total heavy metal concentrations in topsoils when assessing likely effects on plant yields and metal uptakes, and setting soil quality criteria.     

Use of sequential extraction to assess metal partitioning in soils

The state of heavy metal pollution and the mobility of Cd, Cu, Ni, Cr, Pb and Zn were studied in three texturally different agricultural soil profiles near a Cu-Ni smelter in Harjavalta, Finland. The pseudo-total concentrations were determined by an aqua regia procedure. Metals were also determined after division into four fractions by sequential extraction with (1) acetic acid (exchangeable and specifically adsorbed metals), (2) a reducing agent (bound to Fe/Mn hydroxides), (3) an oxidizing agent (bound to soil organic matter) and (4) aqua regia (bound to mineral structures). Fallout from the smelter has increased the concentrations of Cd, Cu and Ni in the topsoil, where 75-90% of Cd, 49-72% of Cu and 22-52% of Ni occurred in the first two fractions. Slight Pb and Zn pollution was evident as well. High proportions of mobile Cd, Cu and Ni also deeper in the sandy soil, closest to the smelter, indicated some downward movement of metals. The hydroxide-bound fraction of Pb dominated in almost all soils and horizons, while Ni, Cr and Zn mostly occurred in mineral structures. Aqua regia extraction is usefully supplemented with sequential extraction, particularly in less polluted soils and in soils that exhibit substantial textural differences within the profiles.     

Growth and trace metal accumulation of two Salix clones on sediment-derived soils with increasing contamination levels

The growth and metal uptake of two willow clones (Salix fragilis 'Belgisch Rood' and Salix viminalis 'Aage') was evaluated in a greenhouse pot experiment with six sediment-derived soils with increasing field Cd levels (0.9-41.4 mg kg-1). Metal concentrations of eight elements were measured in roots, stems and leaves and correlated to total and soil water metal concentrations. Dry weight root biomass, number of leaves and shoot length were measured to identify eventual negative responses of the trees. No growth inhibition was observed for both clones for any of the treatments (max. 41.4 mg kg-1 Cd, 1914 mg kg-1 Cr, 2422 mg kg-1 Zn, 655 mg kg-1 Pb), allowing their use for phytoextraction on a broad range of contaminated sediments. However, dry weight root biomass and total shoot length were significantly lower for S. viminalis compared to S. fragilis for all treatments. Willow foliar Cd concentrations were strongly correlated with soil and soil water Cd concentrations. Both clones exhibited high accumulation levels of Cd and Zn in aboveground plant parts, making them suitable subjects for phytoextraction research. Cu, Cr, Pb, Fe, Mn and Ni were found mainly in the roots. Bioconcentration factors of Cd and Zn in the leaves were highest for the treatments with the lowest soil Cd and Zn concentration.     

Assessment of metal availability to vegetation (Betula pendula) in Pb-Zn ore concentrate residues with different features

In this work, characterisation of several ore concentrate remains from an abandoned Pb-Zn mining factory was performed determining chemical and physical properties such as pH, organic carbon content, particle size distribution, total heavy metal content (Pb, Zn, Cu, As and Cd) as well as mineralogical composition which showed, in most cases, the oxidization of the parent ore material (mostly galena: PbS and sphalerite: ZnS) to more mobile fractions as anglesite (PbSO(4)) and goslarite (ZnSO(4)). Moreover, two operational defined extraction procedures commonly used in soil and sediment studies (first and second steps of BCR procedure and DTPA extraction protocol) were applied in the different mining wastes in order to study Pb and Zn mobility and likely bioavailability to Betula pendula growing on the same mining spoils, which presents lead and zinc contents in leaves over ten times background values.     

Element distribution in Empetrum nigrum microsites at heavy metal contaminated sites in Harjavalta, western Finland

Small-scale element distribution in soil-plant-systems in patches of Empetrum nigrum (microsites) at heavy metal contaminated sites located 0.5 and 4 km from the copper-nickel smelter at Harjavalta was investigated. The Cu concentrations of E. nigrum varied between 12 and 2300 mg/kg dw and showed increasing accumulation with increasing tissue age. Stems contained more Cu than leaves of the same age. The distribution pattern of Ni and Pb in the above-ground biomass followed that of Cu. Roots contained relatively low concentrations of all airborne heavy metals. In the soil, the highest concentrations of total Cu occurred in the humus (Oh) layer: on average 49,450 mg/kg dw at 0.5 km distance and 12,025 mg/kg dw at 4.0 km. Despite the extremely high Cu concentrations in the topsoil, the concentrations in the mineral soil below a depth of 10 cm did not exceed 2.5 mg/kg dw at any site.     

Soil solution dynamics of Cu and Zn in a Cu- and Zn-polluted soil as influenced by gamma-irradiation and Cu-Zn interaction

A pot experiment was conducted to study soil solution dynamics of Cu and Zn in a Cu/Zn-polluted soil as influenced by gamma-irradiation and Cu-Zn interaction. A slightly acid sandy loam was amended with Cu and Zn (as nitrates) either singly or in combination (100 mg Cu and 150 mg Zn kg(-1) soil) and was then gamma-irradiated (10 kGy). Unamended and unirradiated controls were included, and spring barley (Hordeum vulgare L. cv. Forrester) was grown for 50 days. Soil solution samples obtained using soil moisture samplers immediately before transplantation and every ten days thereafter were used directly for determination of Cu, Zn, pH and absorbance at 360 nm (A360). Cu and Zn concentrations in the solution of metal-polluted soil changed with time and were affected by gamma-irradiation and metal interaction. gamma-Irradiation raised soil solution Cu substantially but generally decreased soil solution Zn. These trends were consistent with increased dissolved organic matter (A360) and solution pH after gamma-irradiation. Combined addition of Cu and Zn usually gave higher soil solution concentrations of Cu or Zn compared with single addition of Cu or Zn in gamma-irradiated and non-irradiated soils, indicating an interaction between Cu and Zn. Cu would have been organically complexed and consequently maintained a relatively high concentration in the soil solution under higher pH conditions. Zn tends to occur mainly as free ion forms in the soil solution and is therefore sensitive to changes in pH. The extent to which gamma-irradiation and metal interaction affected solubility and bioavailability of Cu and Zn was a function of time during plant growth. Studies on soil solution metal dynamics provide very useful information for understanding metal mobility and bioavailability.     

Copper and Zn uptake by radish and pakchoi as affected by application of livestock and poultry manures

Environmental safety of agricultural utilization of livestock and poultry manures from intensive farming is attracting great attention because the manures often contain high concentrations of heavy metals and organic pollutants. Pot experiments, in which a pig manure (PM), a chicken manure (CM) and a commercial organic manure (OM) with different concentrations of Cu and Zn to simulate soil metal accumulation by manure application for different times were utilized in a garden soil at a rate of 2% (W/W), were conducted to study the effect of application of these livestock and poultry manures on growth of radish (Raphanus sativus L.) and pakchoi (Brassica chinensis L.) as well as their Cu and Zn uptake. The results exhibit that the manures except the PM improved the growth of radish and pakchoi. The difference of biomass among the same manure treatments containing different concentrations of Cu and Zn, however, was insignificant. In addition, application of the livestock and poultry manures significantly increased soil pHs and electric conductivities (EC) compared with the control, which is ascribed that these manures had high pH and contained large amounts of inorganic ions. The available soil Zn concentrations in the PM were higher than that in the CM and OM, and the extractable soil Cu concentrations in the three manures were almost the same after radish growth in the garden soil but were different after pakchoi growth. Zinc and Cu concentrations in the radish and pakchoi tissues increased when the soil Zn and Cu concentrations increased by manures application, but were still within a safe value. An except is the treatment PM4 in which the Zn concentration of the above-ground part of radish was 28.7 mg kg-1, exceeding the Chinese Food Hygiene Standard of 20 mg kg-1 based on fresh weight. Good correlation was obtained between the extractable soil Zn (or Cu) concentrations extracted by 1.0 mol l-1 NH4NO3 and the Zn (or Cu) concentrations in radish and pakchoi tissues, which was expected to be effective in forecasting Cu and Zn availability to radish and pakchoi in manure agronomic utilization.     

Metal extraction by Arabidopsis halleri grown on an unpolluted soil amended with various metal-bearing solids: a pot experiment.

Most studies dealing with phytoremediation have considered metal extraction efficiency in relation to metal concentration of bulk soil samples or metal concentration of the soil solution. However, little is known about the effect of various metal-bearing solids on plant growth and metal extraction of hyperaccumulators. In this study, we investigated the ability of Arabidopsis halleri to grow and extract metals from different substrates consisting in an unpolluted soil amended with various metal-bearing solids collected in soils around a Zn smelter complex. The metal-bearing solids used as amendments were: fresh and decomposing organic residues in the soil, a soil clay fraction and two waste slags. Pure mono-metallic salt (ZnSO4) was also used. Two series of substrates were produced, one moderately polluted, and the other highly polluted. An additional substrate was formed by the unamended soil, and used as an unpolluted control. Zn, Cd, Cu, and Pb were measured in the substrates, and in the roots and shoots of A. halleri. The dry matter yield of A. halleri was shown not to depend on the nature of the metal-bearing solid used, except when Cu-toxicity was suspected. On highly-polluted substrates, Zn extraction by A. halleri depended on the nature of metal-bearing solids used, showing the following trend: pure mono-metallic salt > waste slags and soil clay fraction > fresh and decomposing organic matter. We explained these differences by the high solubility of Zn in the mono-metallic salt, whereas in the mineral metal-bearing solids and in both fresh and decomposing organic matter, Zn release required mineral weathering or organic matter mineralization, respectively. This work clearly showed that phytoremediation studies have to consider the nature of metal-bearing solids in contaminated soils to better predict the efficiency of plant extraction.     

Lead,zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l(-1) Pb, 2.5, 5, 10, 20 and 30 mg (l-1) Zn, or 0.25, 0.50, 1 and 2 mg l(-1) Cu for 14 days, respectively, then tolerance index (TI) and EC50 (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu.     

Application of 16S rDNA-PCR amplification and DGGE fingerprinting for detection of shift in microbial community diversity in Cu-, Zn-, and Cd-contaminated paddy soils

Seven soils were sampled from farmland at different distances (0.01-5 km) from a copper and zinc smelter. The total contents of heavy metals in these soils ranged from 46 to 4895 mg Cu kg-1, 96 to 1133 mg Zn kg-1, and 6.9 to 28.8 mg Cd kg-1, respectively. The available fractions were highly correlated with total contents of the metals. In order to assess the impact of combined contamination of heavy metals on soil bacterial communities, denaturing gradient gel electrophoresis (DGGE) of polymerase chain reaction (PCR) amplicons of 16S rDNA sequence of bacteria in soil was used. Bacterial community structure was affected to some extent by heavy metals. The number of DGGE bands in soils increased with increasing distance from the copper and zinc smelter. Clustering analysis of the DGGE profiles showed that bacteria in the seven soils belonged to three clusters. Bacterial communities in three soils sampled at 0.01-0.60 km from the smelter belonged to one cluster, and those in three soils sampled at 0.8-1.2 km from the smelter belong to another cluster. Bacterial community in soil farthest from the smelter belonged to a single cluster. This study demonstrated that heavy metal contamination decreased both biomass and diversity of bacterial community in the soil.     

Determination of chemical availability of cadmium and zinc in soils using inert soil moisture samplers

A rapid method for extracting soil solutions using porous plastic soil-moisture samplers was combined with a cation resin equilibration based speciation technique to look at the chemical availability of metals in soil. Industrially polluted, metal sulphate amended and sewage sludge treated soils were used in our study. Cadmium sulphate amended and industrially contaminated soils all had > 65% of the total soil solution Cd present as free Cd2+. However, increasing total soil Cd concentrations by adding CdSO4 resulted in smaller total soil solution Cd. Consequently, the free Cd2+ concentrations in soil solutions extracted from these soils were smaller than in the same soil contaminated by sewage sludge addition. Amendment with ZnSO4 gave much greater concentrations of free Zn2+ in soil solutions compared with the same soil after long-term Zn contamination via sewage sludge additions. Our results demonstrate the difficulty in comparing total soil solution and free metal ion concentrations for soils from different areas with different physiochemical properties and sources of contamination. However, when comparing the same Woburn soil, Cd was much less available as Cd2+ in soil solution from the CdSO4 amended soils compared with soil contaminated by about 36 years of sewage sludge additions. In contrast, much more Zn was available in soil solution as free Zn2+ in the ZnSO4 amended soils compared with the sewage sludge treated soils.