Wasteful waste-reducing policies? The impact of waste reduction policy instruments on collection and processing costs of municipal solid waste

We study the impact of some local policies aimed at municipal solid waste (MSW) reduction on the cost efficiency of MSW collection and disposal. We explicitly account for differences between municipalities in background conditions by using a bootstrapped version of the Data Envelopment Analysis methodology in combination with a matching technique. Using data on 299 municipalities in Flanders, Belgium, for the year 2003, our results indicate that municipalities that are member of a waste collection joint venture, or that subscribe to a voluntary agreement to reduce MSW at the highest ambition level, collect and process MSW more efficiently than other municipalities. Weekly instead of two-weekly waste collection, or using a weight-based pricing system appears to have no impact on efficiency. Our results show that aiming at MSW reduction does not lead to lower efficiency of public service provision, even on the contrary.     

Physical–chemical processes of sustainable materials’ production from hazardous toner waste,galvanic glass waste and spent foundry sand

Journal of Material Cycles and Waste Management - Several sustainable white ceramic composites were prepared from 3 to 7 wt.% of hazardous toner waste, 30–40% of spent foundry sand,...     

Performance results from the Tucumán solid waste bioreactor

Performance results obtained from a 6200 ton demonstration-scale anaerobic bioreactor, constructed on the Pacara Pintada Landfill in Tucumán, Argentina, are described. The operational aspects over a 30-month period for the Tucumán bioreactor demonstrate the ability to maintain the bioreactor in the mesophilic range, with the result that the generation and collection of the biogas has been maintained at accelerated rates with a rate constant of approximately 0.5 year(-1). Field measurements of metal concentrations in leachate indicated significant attenuation over time. Refuse subsidence, measured over a 28-month period, ranged from 4% to 19%, with an average of 11% subsidence across the Tucumán cell.     

Estimating industrial solid waste and municipal solid waste data at high resolution using economic accounts: an input–output approach with Australian case study

In publicly available waste reports only the totals of waste produced for municipal, or industry waste typically feature. The types of waste generated and the generating industry sector are usually omitted. We propose the direct inputs waste estimation methodology to create a detailed estimate of municipal solid waste and industrial solid waste for an economy (including sectoral and waste type disaggregation) using a top-down estimation methodology that links the aforementioned limited publicly available waste data with an input–output table’s direct inputs (A) matrix. We then provide an application of the direct inputs waste estimation methodology upon the 2008 waste generation of Australia resulting in a 344 industry sector and 14 waste type data set. The resulting estimation gives unique insights into Australian waste generation; including the large C&I tonnages of waste estimated to be produced from the Service sectors such as the Education, Hospitality, and Health sectors as well as the large amount of food waste produced throughout the economy.     

Japan’s waste management policies for dioxins and polychlorinated biphenyls

We summarize the measures taken by the Japanese government to prevent the emission of dioxins and polychlorinated biphenyls (PCBs) into the environment. Because incineration is the main method of waste management in Japan, reducing the amount of dioxins emitted from waste incinerators is an essential aspect of proper waste treatment. Intensive measures to prevent the formation of dioxins at the source have been implemented, with a focus on waste treatment methods and improving comprehensive management. The efforts have been very successful, with a 95% reduction in the amount of dioxins emitted between 1997 and 2003. The toxicity of PCBs has been monitored with keen interest since the Yusho incident. Unfortunately, treatment facilities for PCB wastes were not built until long after PCBs had been removed from use, and PCB wastes remained in storage in an untreated state. The Japanese government has promoted the construction of facilities for treating PCB wastes, and five such facilities have commenced operations. To more completely eradicate dioxins, a future challenge will be to reduce the amount of PCB-derived dioxins, which are persistent in the environment and have a long exposure pathway from the environment media to the organism and the human body.     

Quantification of solid waste management system efficiency using input–output indices

Journal of Material Cycles and Waste Management - The assessment of solid waste management systems is vital for continued improvement in the efficiency of waste management systems (WMSs). Many...     

Plastic waste management: is circular economy really the best solution?

Journal of Material Cycles and Waste Management -     

Municipal solid waste management—An example of a partnership between five municipalities

Throughout the 1970s and 1980s many joint municipal partnerships were established in Denmark to take responsibility for the planning and handling of waste on behalf of municipalities in the partnership. RENO SYD is a typical joint municipal partnership, established to handle the municipal solid waste of five municipalities with a total of 65,000 inhabitants. The paper reviews the by-laws and organization of RENO SYD; the facility financing ownership or leasing; the collection of the various waste types; the reception at recycling cites; the refuse treatment, energy recovery, waste separation, treatment and landfill disposal; recycling; and economics, including tipping fees and taxation.     

Cost–benefit analysis of waste reduction in developing countries: a simulation

Waste reduction activities such as recycling, composting, and pig feeding in Peru and other developing countries are mainly informal but already reduce about 15 % of waste generation. Although much research on informal recycling in Latin America recommends partnership with current waste pickers, there is a lack of methodologies on how to systematize these activities. This paper proposes a mathematical model that calculates yields and costs of separate waste collection, and analyzes and measures the effect of improvements such as source separation by residents and location of recycling and composting centers. The analysis finds that the largest effect comes from source separation. In this case, separate collection yield can be increased from the current 30 kg/waste picker/day to about 200 kg/waste picker/day, and the cost can be reduced from 110 US$/t to 20 US$/t. These changes affect the profitability of the recycling and composting business. The environmental and social effects of these improvements are also discussed.     

Waste incineration—An important element of the integrated waste management system in Germany

This paper describes the present situation of waste incineration in Europe and discusses the problems faced in the future when the Directives of the European Community will be implemented on waste management. As an example, the status of thermal waste treatment in Germany is dealt with in detail. A point addressed is that public acceptance of incineration can only be increased if the public is aware of the conditions governing waste avoidance and recycling and if these conditions are actually realized. This means, prior to incineration, recyclable or compostable materials should be separated, and only then can the remaining amounts of wastes be treated before being deposited. The main aim of the treatment process is to reduce the hazard potential posed by waste and to meet the landfill requirements laid down in the German Technical Instructions for Municipal Waste.     

Chemical-mineralogical characterization of C&D waste recycled aggregates from São Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C&;D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C&;D samples taken from the São Paulo region in Brazil are discussed. Chemical compositions of mixed C&;D aggregate samples have mostly been influenced by particle size rather than the visual classification of C&;D into red or grey and geographical origin. The amount of measured soluble salts in C&;D aggregates (0.15–25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C&;D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C&;D powders (<0.15 mm). The clay content of the powders was also high, potentially resulting from soil intermixed with the C&;D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO₂, the powders have potential use as raw materials for the cement industry.     

Assessing the implementation effect of Shanghai’s compulsory municipal solid waste classification policy

Journal of Material Cycles and Waste Management - Waste treatment is a problem faced by cities all over the world. In recent years, China, as a developing country, regards the municipal solid waste...     

Fossil and biogenic CO₂ from waste incineration based on a yearlong radiocarbon study

We describe the first long-term implementation of the radiocarbon (¹⁴C) method to study the share of biogenic (%Bio C) and fossil (%Fos C) carbon in combustion CO₂. At five Swiss incinerators, a total of 24 three-week measurement campaigns were performed over 1 year. Temporally averaged bag samples were analyzed for ¹⁴CO₂ by accelerator mass spectrometry. Significant differences between the plants in the share of fossil CO₂ were observed, with annual mean values from 43.4 ± 3.9% to 54.5 ± 3.1%. Variations can be explained by the waste composition of the respective plant. Based on our dataset, an average value of 48 ± 4%Fos C was determined for waste incineration in Switzerland. No clear annual trend in %Fos C was observed for four of the monitored incinerators, while one incinerator showed considerable variations, which are likely due to the separation and temporary storage of bulky goods.     

CO₂ emission factors for waste incineration: Influence from source separation of recyclable materials

CO₂-loads from combustible waste are important inputs for national CO₂ inventories and life-cycle assessments (LCA). CO₂ emissions from waste incinerators are often expressed by emission factors in kg fossil CO₂ emitted per GJ energy content of the waste. Various studies have shown considerable variations between emission factors for different incinerators, but the background for these variations has not been thoroughly examined. One important reason may be variations in collection of recyclable materials as source separation alters the composition of the residual waste incinerated. The objective of this study was to quantify the importance of source separation for determination of emission factors for incineration of residual household waste. This was done by mimicking various source separation scenarios and based on waste composition data calculating resulting emission factors for residual waste routed to incineration. Emission factors ranged from 27 to 40 kg CO₂/GJ. The results appeared most sensitive towards variations in waste composition and water content. Recycling rates and lower heating values could not be used as simple indicators of the resulting emission factors for residual household waste; however the fossil carbon ratio of the waste after source separation was found to be appropriately correlated with the emission factor. Based on the results, it is recommended to carefully evaluate the source separation and collection systems behind reported literature values when comparing different studies and when using the values for environmental assessment purposes.     

Municipal solid waste management in Africa: strategies and livelihoods in Yaoundé, Cameroon

This paper provides an overview of the state of municipal solid waste (MSW) management in the capital of Cameroon, Yaoundé, and suggests some possible solutions for its improvement. The institutional, financial, and physical aspects of MSW management, as well as the livelihoods of the population, were analyzed. Our study revealed that distances and lack of infrastructure have a major impact on waste collection. Garbage bins are systematically mentioned as the primary infrastructure needed by the population in all quarters, whether it be a high or low standard community. The construction of transfer stations and the installation of garbage bins are suggested as a solution to reduce distances between households and garbage bins, thus improving waste collection vehicle accessibility. Transfer stations and garbage bins would enable the official waste collection company to expand its range of services and significantly improve waste collection rates. Several transfer stations have already been set up by non-governmental organizations (NGOs) and community-based organizations (CBOs), but they require technical, institutional and funding support. Research is needed on the quality and safety of community-made compost, as well as on soil fertility in urban and peri-urban areas. Most of the stakeholders, municipalities, the official waste collection company and households acknowledge the need for better monitoring and regulation of MSW management. The urban community of Yaoundé also needs to maintain its support of MSW management and promote the sustainability of NGOs and CBOs operating in underserved areas not yet covered by adequate infrastructures. A major opportunity for implementation of such waste policy is the heavily indebted poor countries (HIPC) program dedicated to urban planning and good governance.     

Municipal solid waste characteristics and management in Gümüşhane, Turkey

This paper presents a general overview of the current municipal solid waste (MSW) management in Gümüşhane Province, Turkey. In order to characterize the solid waste stream in the Municipality of Gümüşhane, a long-term study was conducted over a 52-week period between the spring of 2004 and the winter of 2005. In this study, percentage of components and specific weight of the MSW, the composting parameters (moisture content, total organic carbon, total nitrogen and pH), organic matter content, calorific value and the heavy metal concentrations (Cd, Cr, Cu, Ni, Pb, Zn, Fe, Mn, Co) of the compostable wastes sorted from the mixed MSW were determined and evaluated. In Gümüşhane, a mean of 70 tons of MSW are generated each day or 1 kg/day/capita. Approximately 4500 kg of the MSW were collected and sorted in a year, and the mean specific weight of these is 308 kg/m³. Approximately 30% of the MSW generated is compostable wastes and the yearly mean moisture content, organic matter content, C/N ratio and pH of these are 78%, 92.1%, 21.6/1 and 4.73, respectively, and approximately 24% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of the MSW, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. Heavy metal concentrations of the compostable wastes from the open dump were determined to decrease in the following order: Fe > Mn > Zn > Cr > Cu > Pb > Ni > Cd > Co.