Effects of water velocity on bulk water quality and biofilm population structure in drinking water distribution systems北大核心CSCD

To study the effect of flow velocity on drinking water distribution systems, bulk water quality was monitored over 28 days, biomass was measured, and 16S rDNA was sequenced on the 28th day using a water distribution simulation system. The relationship between bulk water quality and biofilm was statistically analyzed. Flow velocity of 0.5 m/s yielded the most total organic carbon (TOC) (5.26 ± 0.17 mg/L) in the bulk water, the most bulk water bacteria (lg (n+1/mL-1) = 4.79 ± 0.02), the worst bulk water quality, and the most biofilm bacteria (lg (n+1/cm-2) = 5.48 ± 0.06). A Pearson correlation analysis showed the total number of biofilm bacteria was positively correlated with conductivity (R = 0.73, P < 0.01), turbidity (R = 0.87, P < 0.001), TOC (R = 0.94, P < 0.001), and total bacteria (R = 0.92, P < 0.001), and was negatively correlated with residual chlorine (R = -0.68, P < 0.05). Biofilm diversity was high under the low (0.1 m/s) and high (2.5 m/s) flow rates, but the bacterial diversity of biofilm was the lowest at the 0.5 m/s flow rate, in which Proteobacteria dominated the biofilm community structure. These results suggest that flow velocity affects bulk water quality and biofilm population structure, and water quality and biofilm population structure are interrelated, which provides the theoretical basis for research on biofilms in drinking water distribution systems. © 2018 Science Press. All rights reserved.     

Inorganic pollution in water—the analyst's viewpoint†

Inorganic pollution comprises both major and minor constituents, although only 12 chemical elements may be considered major components. Twenty‐eight elements constitute a group of common minor elements and an additional 13 elements comprise a group of less common minor constituents. Reliable quantitative data are required on the occurrence of these substances in a wide variety of water types, usually at extremely low concentrations. The analysis of standard reference water samples provides information on the overall reliability of water‐quality data. Although most major constituents may be determined with acceptable reliability, determinations of certain minor constituents lack comparable precision; for example, determinations of boron, nickel, and chromium. Few precision data are available on the determination of the less common trace elements. Several comparatively new analytical techniques, such as flameless atomic absorption spectrophotometry, voltammetry, and emission spectroscopy with plasma excitation, appear capable of providing improved sensitivity.     

The occurrence of disinfection by‐products in Taiwan drinking water

In this study, samples were taken from six conventional water treatment plants for disinfection by‐products analysis. Results from the analysis revealed that trihalomethanes (THMs) concentrations in all samples were below regulatory levels (100 μg/L). Although the national standard for haloacetic acids (HAA5) has not yet been promulgated in Taiwan, samples from two water plants contained HAA5 concentrations exceeding the USEPA limit (MCL of HAA5 of Stage 1, 60 μg/L). THMs and HAA5 were found to be the major disinfection by‐products in all water treatment plants. It was noted that the concentration of HAA5 in most samples was higher than that of the trihalomathanes. However, the formation potential of THM (THMFP) was found to be higher than that of HAA (HAAFP). Good correlation also was found between THMFP (or THMFP) and HAA5 (or THMs). In evaluating the performance of the treatment processes, it was found that conventional water treatment processes followed by activated carbon were effective in removing disinfection by‐products (DBPs) from source water with pre‐ozonation. The treatment processes were at their optimum performance in removing contaminants when O₃/TOC₀ was held at 0.75.     

Effect of fluoride content in drinking water in Tricity on its concentration in urine of pre‐school children

Fluorides were analysed in drinking water and in urine of pre‐school children from different districts of Tricity (Gdańsk, Gdynia and Sopot). Concentration of fluorides in urine was found to depend on their content in drinking water. The two years (1997–98) study was made for 15 preschool children populations; each numbering in 10–20 individuals. The fluorides were determined by flouroselective electrode potentiometry.     

Irrigation quotas for high water use efficiency and economic water productivity of typical crops in Shiyang River Basin北大核心CSCD

Water consumption in agricultural activities is the main water use in inland oases in Northwest China. Research on water conservation in agriculture is of great significance to alleviate the conflict between the use of agricultural and ecological water and is of great importance to local farmers’ livelihoods. This study, based on traditional irrigation practices (flood irrigation and fixed irrigation frequency) of Minqin County in Shiyang River Basion, was designed to reveal the impacts of five irrigation quotas (1 800, 1 440, 1 080, 720, and 360 m3/hm2) on crop yield, biomass, irrigation water use efficiency (IWUE), and economic water productivity (EWP) to determine the optimal irrigation for five crops and guide local irrigation practices. The results showed that: (1) Under the five irrigation quotas, IWUE of corn, with the highest of 12.27 kg/m3, was higher than the other four crops; (2) The average EWP of cotton with a 2-year-average of 8.0 yuan/m3 was higher than the other four crops. Thus, the economic output of cotton is the best under the same irrigation quota; (3) Considering the yield, IWUE, EWP, and biomass, corn was better than the other four typical crops; and (4) 1 080 m3/hm2 was the optimal irrigation quota for sunflower in local planting practices. In addition, 720 m3/hm2 was suitable for corn, pepper, wheat, and cotton as their irrigation quota. This study shows that reducing the amount of irrigation quota in the Shiyang River Basin can effectively improve local IWUE and EWP. © 2022 Authors. All rights reserved.     

Graphene quantum dots–eggshell nanocomposite to extract polycyclic aromatic hydrocarbons in water

In solid-phase extraction, the sorbent controls selectivity, affinity, and loading capacity. Many sorbents can be used, such as functionalized resin, naphthalene, activated carbon, molecular-imprinted polymers, and nanometer-sized materials. Here, we prepared a nanocomposite made of graphene quantum dots and eggshell to extract polycyclic aromatic hydrocarbons from aqueous solutions. We studied the effect of sample volume, solution pH, amount of nanosorbent, and sample loading flow rate on the extraction efficiency. We obtained a wide dynamic linear range from 0.1 to 200 ng m/L, good linearity with r ² higher than 0.99, and low-detection limits of 5–75 pg m/L. We measured PAH in spiked water samples.     

Total phosphorus concentrations in surface water of typical agro- and forest ecosystems in China, 2004–2010

The concentrations of total phosphorus （TP） from 83 surface water sampling sites in 29 of the Chinese Ecosystem Research Network （CERN） monitored ecosystems, representing typical agro- and forest ecosystems, were assessed using monitoring data collected between 2004 and 2010 from still and flowing surface water. Results showed that, TP concentrations were significantly higher in agro-ecosystems than those in forest ecosystems both for still and flowing surface water. For agro- ecosystems, TP concentrations in the southern area were significantly higher than those in the northern and north- western areas for both still and flowing surface water, however no distinct spatial pattern was observed for forest ecosystems. In general, the median values of TP within agro- and forest ecosystems did not exceed the Class V guideline for still （0.2mg.L-1） or flowing （0.4mg.L-1） surface water, however, surface water at some agro- ecosystem sampling sites was frequently polluted by TE Elevated concentrations were mainly found in still surface water at the Changshu, Fukang, Linze and Naiman monitored ecosystems, where exceedance （〉 0.2 mg.L-1） frequencies varied from 43% to 78%. For flowing water, elevated TP concentrations were found at the Hailun, Changshu and Shapotou monitored ecosystems, where exceedance （〉 0.4 mg. L-1） frequencies varied from 29% to 100%. Irrational fertilization, frequent irrigation and livestock manure input might be the main contributors of high TP concentrations in these areas, and reduced fertilizer applications, improvements in irrigation practices and centralized treatment of animal waste are necessary to control P loss in these TP vulnerable zones.     

Biosorption of low level Cd~（2＋） in water by Aspergillus sojae

以酱油曲霉（Aspergillus sojae）为吸附剂,对水溶液中微量Cd2＋进行了吸附研究.实验考察了预处理方法、菌体用量、pH、温度和吸附时间对吸附的影响,同时分析了其吸附动力学和吸附等温线特性,并对酱油曲霉菌体吸附Cd2＋的可能作用机理进行了探讨.结果表明,碱预处理的菌体吸附效果最好.在菌体用量为0.08 g时,对Cd2＋的吸附量达到最大,为0.095 mg.g-1.pH值在3.4—8之间,酱油曲霉菌体对Cd2＋的吸附效果比较稳定,其最大吸附率出现在pH 3.4.温度在15℃—30℃之间时,菌体对Cd2＋的吸附率差异很小,吸附率在88.3%—94.4%之间.二级动力学方程能很好地表征酱油曲霉吸附微量Cd2＋的过程,R2在0.99以上,其吸附平衡时间大约2.5 h,线性模型更适于描述该吸附平衡过程.SEM、FTIR分析得出,Cd2＋可能是与酱油曲霉菌体表面的羟基、酰胺基、羧基、磷酸基和胺基等基团相络合而被吸附,也可能是形成颗粒沉淀而附着在菌丝上.     

Whole pictures of halogenated disinfection byproducts in tap water from China’s cities

When bromide/iodide is present in source water, hypobromous acid/hypoiodous acid will be formed with addition of chlorine, chloramine, or other disinfectants. Hypobromous acid/hypoiodous acid undergoes reactions with natural organic matter in source water to form numerous brominated/iodinated disinfection byproducts (DBPs). In this study, tap water samples were collected from eight cities in China. With the aid of electrospray ionization-triple quadrupole mass spectrometry by setting precursor ion scans of m/z 35, m/z 81, and m/z 126.9, whole pictures of polar chlorinated, brominated, and iodinated DBPs in the tap water samples were revealed for the first time. Numerous polar halogenated DBPs were detected, including haloacetic acids, newly identified halogenated phenols, and many new/unknown halogenated compounds. Total organic chlorine, total organic bromine, and total organic iodine were also measured to indicate the total levels of all chlorinated, brominated, and iodinated DBPs in the tap water samples. The total organic chlorine concentrations ranged from 26.8 to 194.0 μg·L^–1 as Cl, with an average of 109.2 μg·L^–1 as Cl; the total organic bromine concentrations ranged from below detection limit to 113.3 μg·L^–1 as Br, with an average of 34.7 μg·L^–1 as Br; the total organic iodine concentrations ranged from below detection limit to 16.4 μg·L^–1 as I, with an average of 9.1 μg·L^–1 as I; the total organic halogen concentrations ranged from 31.3 to 220.4 μg·L^–1 as Cl, with an average of 127.2 μg·L^–1 as Cl.     

Improved source,improved quality? Demand for drinking water quality in rural India

This paper tests the hypothesis that the expansion of improved drinking water supplies in rural India reduced household expenditure on water quality, offsetting some of the quality benefits from source protection. I estimate demand for in-home treatment using geological characteristics to predict a household's drinking water source. The probability of treatment and in particular boiling reduces by 18–27 percentage points in response to source protection, offsetting 4% of the water quality gains and saving households 0.5–1% in monthly expenditure. Behavioral choices partly counteract the water quality gains from source protection.     

Turbulent air–water flows in hydraulic structures: dynamic similarity and scale effects

In hydraulic structures, free-surface aeration is commonly observed: i.e., the white waters. The air bubble entrainment may be localised (hydraulic jumps, plunging jets) or continuous along an interface (water jets, chutes). Despite recent advances, there are some basic concerns about the extrapolation of laboratory results to large size prototype structures. Herein the basic air bubble entrainment processes are reviewed and the relevant dynamic similarities are discussed. Traditionally, physical studies are conducted using a Froude similitude which implies drastically smaller laboratory Reynolds numbers than in the corresponding prototype flows. Basic dimensional analyses are developed for both singular and interfacial aeration processes. The results are discussed in the light of systematic investigations and they show that the notion of scale effects is closely linked with the selection of relevant characteristic air–water flow properties. Recent studies of local air–water flow properties highlight that turbulence levels, entrained bubble sizes and interfacial areas are improperly scaled based upon a Froude similitude even in large-size models operating with the so defined Reynolds numbers ρ _w × q _w/μ _w up to 5 E+5. In laboratory models, the dimensionless turbulence levels, air–water interfacial areas and mass transfer rates are drastically underestimated.     

Inductively coupled plasma‐atomic emission spectroscopy in air and water pollution analysis†

The inductively coupled plasma (ICP), when employed as an excitation source in optical atomic emission spec.troscopy (AES), is finding widespread utilization for single and multielement inorganic trace analysis of pollutants. The recent availability of commercial ICP‐AES instrument systems has stimulated applications for the determination of metals and metalloids in diverse materials ranging from air particulates and fly ash to industrial effluents, sewage, and hard, soft, and saline waters.

The capabilities and limitations of ICP‐AES for applications in air and water pollution analysis are reviewed, and a number of recent examples presented.     

Regression models for octanol‐water partition coefficients,and for bioconcentration in fish

Octanol‐water partition coefficients (P) of a number of organochlorine insecticides (OCs) are presented. The merits of log‐log regressions between experimental ? values and calculated estimates of P, solute activity coefficients in water, solute molecular surface area data, and reversed‐phase liquid‐chromatographic net retention data, are critically evaluated for several classes of pollutants: polycyclic aromatic hydrocarbons (PAHs), chlorinated benzenes, chlorinated biphenyls and OCs. Special attention is paid to the predictive accuracy of such semi‐empirical regressions in connection with possible effects of solute molecular shape and polarity.

Finally, bioconcentration and ‐accumulation of hydrophobic pollutants in fish are briefly discussed.     

Do water saving technologies save water? Empirical evidence from North China

This paper describes the extent of water saving technologies usage and evaluates their impacts on water use, water productivity, total irrigated sown area and crop mix in North China. A set of panel data collected at the househol.d and plot levels is used in empirical analysis. Water saving technologies are categorized into traditional technologies, household-based technologies and community-based technologies. By 2007, traditional technologies and household-based technologies are used in almost all sample villages. However, the shares of sown area on which water saving technologies are used are still fairly low. Econometric analysis using plot level fixed effects show that using water saving technologies can reduce crop water use and improve the productivity of water. The positive effects are generated mainly through the use of household-based or community-based technologies. The use of water saving technologies does not have statistically significant impacts on total irrigated sown area and crop mix.     

Spatial variability in soil water and salinity in Tamarix community in a semiarid saline region of the upper Yellow River北大核心CSCD

Tamarix is widely distributed in semiarid saline regions of the upper Yellow River. The community of Tamarix affects the spatial distribution of soil water and salinity. It is important to explore the dynamic response relationship of Tamarix community and spatial distribution of soil water and salinity in order to evaluate the effects of vegetation community construction and ecological restoration in this region. The natural Tamarix community in the secondary saline-alkali land of the Ningxia Yellow River Irrigation Area was investigated in July 2016. Classical statistics and geostatistics were used to analyze the spatial distribution characteristics of soil water and salinity. The results showed that the soil water content was relatively low (1.98%-7.55%), whereas the soil salinity was high (average conductivity 10.28-25.38 mS/cm) in the study area. The variability coefficient range of soil water and salinity was 36.1%-83.7%, both with moderate variations. Furthermore, the variation degree of soil salinity decreased with the increase in soil depth. The soil water and salinity had obvious spatial structure characteristics, which was mainly affected by structural factors or structural factors associated with stochastic factors. The coefficients of nugget were 0.04%-49.88%, indicating the strong spatial correlation. The spatial distribution of soil water and salinity in Tamarix community showed a patchy pattern; the soil water and salinity distribution in the areas with high Tamarix growing density were considerably high. The correlation analysis showed that there was a positive correlation between soil water and salinity in the study area. In conclusion, soil water and salinity restrict the distribution and growth of Tamarix. Furthermore, the distribution and growth of Tamarix enhanced the spatial variability of soil water and salinity. Keywords. © 2018 Science Press. All rights reserved.     

Variations in heavy metal contamination of stream water and groundwater affected by an abandoned lead–zinc mine in Korea

This study evaluated variations in heavy metal contamination of stream waters and groundwaters affected by an abandoned lead–zinc mine, where a rockfill dam for water storage will be built 11 km downstream. For these purposes, a total of 10 rounds of stream and groundwater samplings and subsequent chemical analyses were performed during 2002–2003. Results of an exploratory investigation of stream waters in 2000 indicated substantial contamination with heavy metals including zinc (Zn), iron (Fe) and arsenic (As) for at least 6 km downstream from the mine. Stream waters near the mine showed metal contamination as high as arsenic (As) 8,923 μg L⁻¹, copper (Cu) 616 μg L⁻¹, cadmium (Cd) 223 μg L⁻¹ and lead (Pb) 10,590 μg L⁻¹, which greatly exceeded the Korean stream water guidelines. Remediation focused on the mine tailing piles largely improved the stream water qualities. However, there have still been quality problems for the waters containing relatively high concentrations of As (6–174 μg L⁻¹), Cd (1–46 μg L⁻¹) and Pb (2–26 μg L⁻¹). Rainfall infiltration into the mine tailing piles resulted in an increase of heavy metals in the stream waters due to direct discharge of waste effluent, while dilution of the contaminated stream waters improved the water quality due to mixing with metal free rain waters. Levels of As, Cu and chromium (Cr) largely decreased after heavy rain but that of Pb was rather elevated. The stream waters were characterized by high concentrations of calcium (Ca) and sulfate (SO₄), which were derived from dissolution and leaching of carbonate and sulfide minerals. It was observed that the proportions of Ca and SO₄ increased while those of bicarbonate (HCO₃) and sodium and potassium (Na+K) decreased after a light rainfall event. Most interestingly, the reverse was generally detected for the groundwaters. The zinc, being the metal mined, was the most dominant heavy metal in the groundwaters (1758–10,550 μg L⁻¹) near the mine, which far exceeded the Korean standard of 1000 μg L⁻¹ for drinking water. The decreases in the heavy metals contents in the groundwaters associated with reduced rainfall were quite different from the increases observed for the stream waters, which is not clearly understood at this time and warrants further investigation.     

Long‐term desorption kinetics of Cu2+from biosorbent in water and seawater

A long‐term study of the desorption kinetics of Cu²⁺from biosorbent materials in water and seawater environments was carried out. The biosorbents were un‐treated and pre‐treated biomass of marine alga Durvillaea potatorum.The pre‐treatment of the biomass was carried out with calcium chloride (CaCl₂) solution followed by thermal treatment. The biosorbents were loaded with Cu²⁺in batch adsorption experiments and the desorption kinetics were measured in water and seawater in static batch desorption experiments for a period over 10 months. The physical and structure characteristics of the biosorbents were also examined under a microscope. The un‐treated biosorbent structure completely broke down in 2 and 1 months in water and seawater environments, respectively. The pre‐treatment procedure applied improved the biosorbent stability and its long term desorption rate was extremely low.     

National water footprint in an input–output framework—A case study of China 2002

Water footprint is an indicator showing the consumption impact on environment with water equivalent, which allows a detailed quantification of water use directly and indirectly in sectors for the domestic and abroad final consumption. This paper presents a framework of calculating national water footprint (NWF) with input–output method on China 2002. The results indicated that the NWF of China was 381 m³/cap yr in 2002. A new indicator termed as national water footprint intensity (NWFI) is also derived from NWF to evaluate the water consumption intensities of different sectors. Then the evaluation of virtual water trade in sectors is followed, the results of which give a detailed quantification of net virtual water import of sectors, verifying that China is a net virtual water exporter concerning the whole national sectors, which is different from the previous studies. Finally, it is suggested that the sectors with high NWFI and volume of net virtual water export should be regarded as the priority of Chinese water-saving strategy.     

Aqueous high‐temperature chemistry of arsenic‐containing compounds in water at 300°C

Arsenic compounds, and especially organo‐arsenic derivatives, are highly toxic and many have been manufactured as chemical warfare agents. This study was designed to provide background information relevant to the potential application of aquathermolysis techniques for the detoxification of such potent military warfare agents. Six arsenic‐containing compounds with structural features which mimic known agents were studied in neutral superheated water: 4‐aminophenylarsine oxide, 4‐arsanilic acid, 4‐nitrophenylarsonic acid, 5, 10‐dihydro‐10‐ethylphenarsazine, tetraphenylarsonium chloride hydrate, and (3‐cyanopropyl)dimethyl(2‐phenethyl)arsonium bromide. Most of these compounds were moderately susceptible to hydrolysis for 1h at 300°C. o‐ and p‐Aminosubsituted arsenic compounds were more reactive than compounds with an electron‐withdrawing group substituent. Aromatic C—As bonds were more resistant to cleavage than aliphatic C—As bonds.     

What have we known so far about microplastics in drinking water treatment? A timely review

• 23 available research articles on MPs in drinking water treatment are reviewed. • The effects of treatment conditions and MP properties on MP removal are discussed. • DWTPs with more steps generally are more effective in removing MPs. • Smaller MPs (e.g.,<10 μm) are more challenging in drinking water treatment. Microplastics (MPs) have been widely detected in drinking water sources and tap water, raising the concern of the effectiveness of drinking water treatment plants (DWTPs) in protecting the public from exposure to MPs through drinking water. We collected and analyzed the available research articles up to August 2021 on MPs in drinking water treatment (DWT), including laboratory- and full-scale studies. This article summarizes the major MP compositions (materials, sizes, shapes, and concentrations) in drinking water sources, and critically reviews the removal efficiency and impacts of MPs in various drinking water treatment processes. The discussed drinking water treatment processes include coagulation-flocculation (CF), membrane filtration, sand filtration, and granular activated carbon (GAC) filtration. Current DWT processes that are purposed for particle removal are generally effective in reducing MPs in water. Various influential factors to MP removal are discussed, such as coagulant type and dose, MP material, shape and size, and water quality. It is anticipated that better MP removal can be achieved by optimizing the treatment conditions. Moreover, the article framed the major challenges and future research directions on MPs and nanoplastics (NPs) in DWT.