Biodegradation potential of cyano-based ionic liquid anions in a culture of Cupriavidus spp. and their in vitro enzymatic hydrolysis by nitrile hydratase

Biodegradation tests with bacteria from activated sludge revealed the probable persistence of cyano-based ionic liquid anions when these leave waste water treatment plants. A possible biological treatment using bacteria capable of biodegrading similar compounds, namely cyanide and cyano-complexes, was therefore examined. With these bacteria from the genera Cupriavidus, the ionic liquid anions B(CN)₄ ^?, C(CN)₃ ^?, N(CN)₂ ^? combined with alkaline cations were tested in different growth media using ion chromatography for the examination of their primary biodegradability. However, no enhanced biodegradability of the tested cyano-based ionic liquids was observed. Therefore, an in vitro enzymatic hydrolysis test was additionally run showing that all tested ionic liquid (IL) anions can be hydrolysed to their corresponding amides by nitrile hydratase, but not by nitrilase under the experimental conditions. The biological stability of the cyano-based anions is an advantage in technological application, but the occurrence of enzymes that are able to hydrolyse the parent compound gives a new perspective on future cyano-based IL anion treatment.     

Evaluation of the toxicity of substances to be assessed for biodegradability

The ability to distinguish between true non-biodegradability, and inhibition of biodegradability due to the toxic effects of the compound tested present problems. It results in possible false identification of substances as non-biodegradable.Six chemicals were evaluated in a variety of tests to assess their toxicity to aerobic sludge organisms. The tests employed were: BOD₅ and Closed Bottle inhibition tests, inhibition of respiration of activated sludge, growth inhibition of activated sludge, light emission from (MICROTOX test) and the repetitive die-away test (RDA). Results from these tests were compared with results obtained from a number of ready biodegradability tests using the compounds listed above at anticipated non-toxic and toxic concentrations.No test method evaluated consistently forecast toxicity due to the chemicals tested. The MICROTOX and nitrification inhibition tests were too sensitive. A combination of sludge respiration rate and/or growth tests seem most appropriate. To avoid toxicity to the sludge, biodegradability testing should be made at 10% of the EC₅₀ value. Compounds with an EC₅₀ value greater than 300 mg/l are unlikely to be toxic in ready biodegradability tests. Compounds with an EC₅₀ value of less than 20 mg/l may pose problems necessitating the use of the stringent closed bottle test, or the use of C¹⁴ labelled test materials. Compounds with an intermediate EC₅₀ that is between 20–300 mg/l, need to be evaluated at a range of concentrations in biodegradability tests, or may need to be evaluated carefully to define the precise no-effect level. Procedure recommendations to distinguish between the inhibition of biodegradability and inertness of the test substance are made.     

Automated evaluation of the effect of ionic liquids on catalase activity

An automated assay for the evaluation of the influence of ionic liquids on the activity of catalase was developed. The activity and inhibition assays were implemented in a sequential injection analysis (SIA) system and intended to contribute for the estimation of the toxicity of the tested compounds. The fast developed methodology was based on the oxidation of the non-fluorescent probe amplex red, in the presence of H₂O₂, to produce resorufin, a strong fluorescent compound. Catalase activity was monitored by the decreased of the fluorescence intensity due to the consumption of H₂O₂ by the enzyme. The activity assays were performed in strictly aqueous media and in the presence of increasing concentrations of seven commercially available ionic liquids and sodium azide, a strong inhibitor of catalase. IC₅₀ values between 0.15 and 2.77 M were obtained for the tested compounds, revealing distinct inhibitory effects. This allowed us to perform some considerations about the toxicity of the tested cations and anions. The developed SIA methodology showed to be robust and exhibited good repeatability in all the assay conditions. On the other hand, it proved to be in good agreement with the actual concerns of “Green Chemistry” since it involved the consumption of less than 200 μL of reagents and the production of only 1.7 mL of effluent (per cycle) and at the same time reduced the operator exposure resulting in increased environmental and human safety.     

Ecotoxicity and biodegradability of antielectrostatic dicephalic cationic surfactants

Four series of dicephalic cationic surfactants, considered as new antielectrostatic agents have been investigated in order to establish their toxicity and biodegradability. Among them N,N-bis[3,3′-(dimethylamine)propyl]alkylamides, N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides, N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dimethylsulphates with different hydrophobic chain length (n-C₉H₁₉ to n-C₁₅H₃₁) and type of counterion (chloride, bromide and methylsulfate) have been studied. The inhibitory effect against microorganisms has been examined using model gram-positive and gram-negative bacteria, and yeasts. None of the tested surfactants have shown antimicrobial activity against gram-negative bacteria (Escherichia coli, Pseudomonas putida) and yeasts (Saccharomyces cerevisiae, Rhodotorula glutinis) at a concentration below 1000 μg mL⁻¹, however some of them were moderately active against gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis). The Microtox® test was successfully applied to measure EC₅₀ values of the studied dicephalic cationic surfactants. Their toxicity to Vibrio fischeri depended upon the alkanoyl chain length with the EC₅₀ values in a range of 2.6-980 mg L⁻¹. N,N-bis[3,3′-(dimethylamine)propyl]alkylamide dihydrochlorides 2a-b and N,N-bis[3,3′-(trimethylammonio)propyl]alkylamide dibromides 3a-b comprising n-decanoyl and n-dodecanoyl hydrophobic tails appeared to be the least toxic. Furthermore, the biodegradability under aerobic conditions of 2a-b, 3a-b was evaluated using OECD Method 301F. According to the obtained results 2a, 3a-3b can be considered as almost readily biodegradable and they are not expected to be persistent in the environment. Additionally, partial biodegradation was observed for 2b, indicating its possible biodegradation in wastewater treatment systems.     

Toxicity and metabolism of copper pyrithione and its degradation product, 2,2'-dipyridyldisulfide in a marine polychaete

We conducted acute toxicity tests and sediment toxicity tests for copper pyrithione (CuPT) and a metal pyrithione degradation product, 2,2′-dipyridyldisulfide [(PS)₂], using a marine polychaete Perinereis nuntia. The acute toxicity tests yielded 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 0.06 mg L⁻¹ and 7.9 mg L⁻¹, respectively. Sediment toxicity tests resulted in 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 1.1 mg kg⁻¹ dry wt. and 14 mg kg⁻¹ dry wt., respectively. In addition to mortality, sediment avoidance behavior and decreases in animal growth rate were observed; growth rate was the most susceptible endpoint in the sediment toxicity tests of both toxicants. Thus, we propose lowest observed effect concentrations of 0.3 mg kg⁻¹ dry wt. and 0.2 mg kg⁻¹ dry wt. for CuPT and (PS)₂, respectively, and no observed effect concentrations of 0.1 mg kg⁻¹ dry wt. for both CuPT and (PS)₂. The difference in the toxicity values between CuPT and (PS)₂ observed in the acute toxicity test was greater than the difference in these values in the sediment toxicity test, and we attribute this to (PS)₂ being more hydrophilic than CuPT. In addition to the toxicity tests, we analyzed conjugation activity of several polychaete enzymes to the toxicants and marked activity of palmitoyl coenzyme-A:biocides acyltransferase and UDP-glucuronosyl transferase was observed.     

Toxicity of 58 substituted anilines and phenols to algae Pseudokirchneriella subcapitata and bacteria Vibrio fischeri: comparison with published data and QSARs

A congeneric set of 58 substituted anilines and phenols was tested using the 72-h algal growth inhibition assay with Pseudokirchneriella subcapitata and 15-min Vibrio fischeri luminescence inhibition assay. The set contained molecules substituted with one, two or three groups chosen from -chloro, -methyl or -ethyl. For 48 compounds there was no REACH-compatible algal toxicity data available before. The experimentally obtained EC50 values (mg L⁻¹) for algae ranged from 1.43 (3,4,5-trichloroaniline) to 197 (phenol) and for V. fischeri from 0.37 (2,3,5-trichlorophenol) to 491 (aniline). Only five of the tested 58 chemicals showed inhibitory effect to algae at concentrations >100 mg L⁻¹, i.e. could be classified as “not harmful”, 32 chemicals as “harmful” (10-100 mg L⁻¹) and 21 as “toxic” (1-10 mg L⁻¹). The occupied para-position tended to increase toxicity whereas most of the ortho-substituted congeners were the least toxic. As a rule, the higher the number of substituents the higher the hydrophobicity and toxicity. However, in case of both assays, the compounds of similar hydrophobicity showed up to 30-fold different toxicities. There were also assay/organism dependent tendencies: phenols were more toxic than anilines in the V. fischeri assay but not in the algal test. The comparison of the experimental toxicity data to the data available from the literature as well as to QSAR predictions showed that toxicity of phenols to algae can be modeled based on hydrophobicity, whereas the toxicity of anilines to algae as well as toxicity of both anilines and phenols to V. fischeri depended on other characteristics in addition to logK_ow.     

Expression alterations of cytochromes P4501A1, 2E1, and 3A,and their receptors AhR and PXR caused by 1-octyl-3-methylimidazolium chloride in mouse mammary carcinoma cells

Cytochrome P450s (CYPs) play a key role in the metabolism of a wide range of environmental xenobiotics and endogenous compounds. The expression and activity levels of CYPs can be elevated by a process of induction involving the activation of nuclear receptors. The effects of the ionic liquid 1-octyl-3-methylimidazolium chloride ([C₈mim][Cl]) on the expression of cytochrome P450 members, including CYP1A1, CYP2E1, and CYP3A, as well as on aryl hydrocarbon receptor (AhR) and pregnane X receptor (PXR) in mouse mammary carcinoma cells (EMT6) were investigated by using quantitative real-time PCR in the present study. The results reveal that [C₈mim][Cl]-exposure up-regulates the expressions of CYP1A1, CYP2E1, and CYP3A at mRNA level, suggesting that imidazolium-based ionic liquids can activate CYPs. Our results also suggest that [C₈mim][Cl]-mediated CYP3A induction be PXR-dependent. This result may be beneficial to evaluating the environmental toxicity of imidazolium-based ionic liquids and investigating the metabolism of imidazolium-derivative drugs.     

The effect of alkyl chain length on the degradation of alkylimidazolium- and pyridinium-type ionic liquids in a Fenton-like system

Background, aim, and scope  Ionic liquids are regarded as essentially “green” chemicals because of their insignificant vapor pressure and, hence, are a good alternative to the emissions of toxic conventional volatile solvents. Not only because of their attractive industrial applications, but also due to their very high stability, ionic liquids could soon become persistent contaminants of technological wastewaters and, moreover, break through into natural waters following classical treatment systems. The removal of harmful organic pollutants has forced the development of new methodologies known as advanced oxidation processes (AOPs). Among them, the Fenton and Fenton-like reactions are usually modified by the use of a higher hydrogen peroxide concentration and through different catalysts. The aim of this study was to assess the effect of hydrogen peroxide concentration on degradation rates in a Fenton-like system of alkylimidazolium ionic liquids with alkyl chains of varying length and 3-methyl-N-butylpyridinium chloride. Materials and methods  The ionic liquids were oxidized in dilute aqueous solution in the presence of two different concentrations of hydrogen peroxide. All reactions were performed in the dark to prevent photoreduction of Fe(III). The concentrations of ionic liquids during the process were monitored with high-performance liquid chromatography. Preliminary degradation pathways were studied with the aid of ¹H NMR. Results  Degradation of ionic liquids in this system was quite effective. Increasing the H₂O₂ concentration from 100 to 400 mM improved ionic liquid degradation from 57–84% to 87–100% after 60 min reaction time. Resistance to degradation was weaker, the shorter the alkyl chain. Discussion  The compound omimCl was more resistant to oxidation then other compounds, which suggests that the oxidation rates of imidazolium ionic liquids by OH· are structure-dependent and are correlated with the n-alkyl chain length substituted at the N-1-position. The level of degradation was dependent on the type of head group. Replacing the imidazolium head group with pyridinium increased resistance to degradation. Nonetheless, lengthening the alkyl chain from four to eight carbons lowered the rate of ionic liquid degradation to a greater extent than changing the head group from imidazolium to pyridinium. 1H-NMR spectra show, in the first stage of degradation, that it is likely that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Conclusions  The proposed method has proven to be an efficient and reliable method for the degradation of imidazolium ionic liquids by a Fenton-like reagent deteriorated with lengthening n-alkyl substituents and by replacing the imidazolium head group with pyridinium. The enhanced resistance of 1-butyl-3-methylpyridinium chloride when the resistance of imidazolium ionic liquids decreases with increasing H₂O₂ concentration is probably indicative of a change in the degradation mechanism in a vigorous Fenton-like system. H-NMR spectra showed, in the first stage of degradation, that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Recommendations and perspectives  Since ionic liquids are now one of the most promising alternative chemicals of the future, the degradation and waste management studies should be integrated into a general development research of these chemicals. In the case of imidazolium and pyridinium ionic liquids that are known to be resistant to bio- or thermal degradation, studies in the field of AOPs should assist the future structural design as well as tailor the technological process of these chemicals     

Incomplete aerobic degradation of the antidiabetic drug Metformin and identification of the bacterial dead-end transformation product Guanylurea

Active pharmaceutical ingredients as well as personal care products are detected in increasing prevalence in different environmental compartments such as surface water, groundwater and soil. Still little is known about the environmental fate of these substances. The type II antidiabetic drug Metformin has already been detected in different surface waters worldwide, but concentrations were significantly lower than the corresponding predicted environmental concentration (PEC). In human and mammal metabolism so far no metabolites of Metformin have been identified, so the expected environmental concentrations should be very high.To assess the aerobic biodegradability of Metformin and the possible formation of degradation products, three Organisation of Economic Cooperation and Development (OECD) test series were performed in the present study.In the Closed Bottle test (OECD 301 D), a screening test that simulates the conditions of an environmental surface water compartment, Metformin was classified as not readily biodegradable (no biodegradation). In the Manometric Respiratory test (OEDC 301 F) working with high bacterial density, Metformin was biodegraded in one of three test bottles to 48.7% and in the toxicity control bottle to 57.5%. In the Zahn-Wellens test (OECD 302 B) using activated sludge, Metformin was biodegraded in both test vessels to an extent of 51.3% and 49.9%, respectively.Analysis of test samples by high performance liquid chromatography coupled to multiple stage mass spectrometry (HPLC-MS(n)) showed in the tests vessels were biodegradation was observed full elimination of Metformin and revealed Guanylurea (Amidinourea, Dicyandiamidine) as single and stable aerobic bacterial degradation product. In another Manometric Respiratory test Guanylurea showed no more transformation. Photodegradation of Guanylurea was also negative.A first screening in one of the greatest sewage treatment plant in southern Germany found Metformin with high concentrations (56.8 μg L⁻¹) in the influent (PEC = 79.8 μg L⁻¹), but effluent concentration was much lower (0.76 μg L⁻¹) whereas Guanylurea was detected in a low influent and high effluent concentration (1.86 μg L⁻¹). These data support the experimental findings in the OECD tests and analytical results of other studies, that Metformin under aerobic conditions can bacterially be degraded to the stable dead-end transformation product Guanylurea.     

Development of a novel mathematical model using a group contribution method for prediction of ionic liquid toxicities

A new mathematical model has been developed that expresses the toxicities (EC₅₀ values) of a wide variety of ionic liquids (ILs) towards the freshwater flea Daphnia magna by means of a quantitative structure-activity relationship (QSAR). The data were analyzed using summed contributions from the cations, their alkyl substituents and anions. The model employed multiple linear regression analysis with polynomial model using the MATLAB software. The model predicted IL toxicities with R² = 0.974 and standard error of estimate of 0.028. This model affords a practical, cost-effective and convenient alternative to experimental ecotoxicological assessment of many ILs.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

PTR-MS measurement of partition coefficients of reduced volatile sulfur compounds in liquids from biotrickling filters

Biological air filtration for reduction of emissions of volatile sulfur compounds (e.g., hydrogen sulfide, methanethiol and dimethyl sulfide) from livestock production facilities is challenged by poor partitioning of these compounds into the aqueous biofilm or filter trickling water. In this study, Henry’s law constants of reduced volatile sulfur compounds were measured for deionized water, biotrickling filter liquids (from the first and second stages of a two-stage biotrickling filter), and NaCl solutions by a dynamic method using Proton-Transfer-Reaction Mass Spectrometry (PTR-MS) at a temperature range of 3–45 °C. NaCl solutions were used to estimate salting-out constants up to an ionic strength of 0.7 M in order to evaluate the effect of ionic strength on partitioning between air and biofilter liquids. Thermodynamic parameters (enthalpy and entropy of phase exchange) were obtained from the measured partition coefficients as a function of temperature. The results show that the partition coefficients of organic sulfur compounds in the biotrickling filter liquids were generally very close to the corresponding partition coefficients in deionized water. Based on the estimated ionic strength of biofilter liquids, it is assessed that salting-out effects are of no importance for these compounds. For H₂S, a higher enthalpy of air–liquid partitioning was observed for 2nd stage filter liquid, but not for 1st stage filter liquid. In general, the results show that co-solute effects for sulfur compounds can be neglected in numerical biofilter models and that the uptake of volatile sulfur compounds in biotrickling filter liquids cannot be increased by decreasing ionic strength.     

A new bioseed for determination of wastewater biodegradability: analysis of the experimental procedure

A new bioassay proposed in the patent P201300029 was applied to a pre-treated wastewater containing a mixture of commercial pesticides to simulate a recalcitrant industrial wastewater in order to determine its biodegradability. The test uses a mixture of standardized inoculum of the lyophilized bacteria Pseudomonas putida with the proper proportion of salts and minerals. The results highlight that biodegradation efficiency can be calculated using a gross parameter (chemical oxygen demand (COD)) which facilitates the biodegradability determination for routine water biodegradability analysis. The same trend was observed throughout the assay with the dehydrated and fresh inoculums, and only a difference of 5 % in biodegradation efficiency (E _f) was observed. The obtained results showed that the P. putida biodegradability assay can be used as a commercial test with a lyophilized inoculum in order to monitor the ready biodegradability of an organic pollutant or a WWTP influent. Moreover, a combination of the BOD₅/COD ratio and the P. putida biodegradability test is an attractive alternative in order to evaluate the biodegradability enhancement in water pre-treated with advanced oxidation processes (AOPs).     

Estimating the vapor pressures of multi-functional oxygen-containing organic compounds using group contribution methods

A UNIFAC-based method for estimating the vapor pressure (p_L^o) values of oxygen-containing compounds of intermediate-to-low volatility has been developed as an aid in modeling the formation and behavior of organic aerosols. This UNIFAC-p_L^o method was constructed using a set of 76 compounds with experimentally determined p_L^o values. The compounds chosen are of intermediate-to-low volatility and contain multiple oxygen-containing functionalities. For test and development purposes, the 76 compounds were divided into a basis set of 43 compounds used to generate the coefficients required in the UNIFAC-p_L^o method and a second set of 33 compounds that was used to test the coefficients generated using the basis set. Both the basis and test sets contained compounds that possessed similar structures and functionalities. For the 33 compounds in the test set, on average UNIFAC-p_L^o predicted the p_L^o values to within a factor of 2 over the temperature range 290–320 K. Furthermore, the UNIFAC-p_L^o method did not show any correlation in prediction error with p_L^o so that it was equally likely to underpredict as overpredict p_L^o regardless of volatility. For comparison, three other vapor pressure estimation methods were applied to the test set of compounds. On average, these other methods all predicted the test set p_L^o values to within a factor of 3 over the temperature range 290–320 K. In contrast to the UNIFAC-p_L^o method, the prediction errors from the methods were found to be correlated with p_L^o so that the other methods overpredicted p_L^o as volatility decreased.     

Effects of the pharmaceuticals gemfibrozil and diclofenac on biomarker expression in the zebra mussel (Dreissena polymorpha) and their comparison with standardised toxicity tests

Pharmaceuticals, including the lipid regulator gemfibrozil and the non-steroidal anti-inflammatory drug diclofenac have been identified in waste water treatment plant effluents and receiving waters throughout the western world. The acute and chronic toxicity of these compounds was assessed for three freshwater species (Daphnia magna,Pseudokirchneriella subcapitata, Lemna minor) using standardised toxicity tests with toxicity found in the non-environmentally relevant mid mg L⁻¹ concentration range. For the acute endpoints (IC₅₀ and EC₅₀) gemfibrozil showed higher toxicity ranging from 29 to 59 mg L⁻¹ (diclofenac 47-67 mg L⁻¹), while diclofenac was more toxic for the chronic D. magna 21 d endpoints ranging from 10 to 56 mg L⁻¹ (gemfibrozil 32-100 mg L⁻¹). These results were compared with the expression of several biomarkers in the zebra mussel (Dreissena polymorpha) 24 and 96 h after exposure by injection to concentrations of 21 and 21,000 μg L⁻¹ corresponding to nominal concentrations of 1 and 1000 μg L⁻¹. Exposure to gemfibrozil and diclofenac at both concentrations significantly increased the level of lipid peroxidation, a biomarker of damage. At the elevated nominal concentration of 1000 μg L⁻¹ the biomarkers of defence glutathione transferase and metallothionein were significantly elevated for gemfibrozil and diclofenac respectively, as was DNA damage after 96 h exposure to gemfibrozil. No evidence of endocrine disruption was observed using the alkali-labile phosphate technique. Results from this suite of biomarkers indicate these compounds can cause significant stress at environmentally relevant concentrations acting primarily through oxidation pathways with significant destabilization of the lysosomal membrane and that biomarker expression is a more sensitive endpoint than standardised toxicity tests.     

Cellular damages in the Allium cepa test system, caused by BTEX mixture prior and after biodegradation process

Petroleum and derivatives have been considered one of the main environmental contaminants. Among petroleum derivatives, the volatile organic compounds benzene, toluene, ethylbenzene and xylene (BTEX) represent a major concern due to their toxicity and easy accumulation in groundwater. Biodegradation methods seem to be suitable tools for the clean-up of BTEX contaminants from groundwater. Genotoxic and mutagenic potential of BTEX prior and after biodegradation process was evaluated through analyses of chromosomal aberrations and MN test in meristematic and F₁ root cells using the Allium cepa test system. Seeds of A. cepa were germinated into five concentrations of BTEX, non-biodegraded and biodegraded, in ultra-pure water (negative control), in MMS 4 × 10⁻⁴ M (positive control) and in culture medium used in the biodegradation (blank biodegradation control). Results showed a significant frequency of both chromosomal and nuclear aberrations. The micronucleus (MN) frequency in meristematic cells was significant for most of tested samples. However, MN was not present in significant levels in the F₁ cells, suggesting that there was no permanent damage for the meristematic cell. The BTEX effects were significantly reduced in the biodegraded samples when compared to the respective non-biodegraded concentrations. Therefore, in this study, the biodegradation process showed to be a reliable and effective alternative to treat BTEX-contaminated waters. Based on our results and available data, the BTEX toxicity could also be related to a synergistic effect of its compounds.     

Acute and chronic toxicity of Roundup Weathermax and Ignite 280 SL to larval Spea multiplicata and S. bombifrons from the Southern High Plains, USA

Pesticides have been implicated in widespread amphibian declines. We assessed acute and chronic toxicity of two widely used herbicides to larval New Mexico (Spea multiplicata) and Plains (S. bombifrons) spadefoots from cropland and native grassland playas. Roundup WeatherMAX^® (WM) toxicity estimates (48- and 216-h LC₅₀; 48-h LC₁) for both species were similar to environmental concentrations expected from accidental overspray. Chronic (30-day) exposure to WM at predicted environmental concentrations (2.0 and 2.8 mg glyphosate acid equivalents/L) reduced survival of both species. Ignite^® 280 SL (IG) toxicity estimates (48-h LC₅₀ and LC₁) for both species were above predicted environmental concentrations of 1.0 mg glufosinate/L. Chronic exposure to predicted environmental concentrations of IG did not reduce survival of either species. Toxicity test results suggest that at predicted environmental concentrations IG would not cause extensive mortalities among larval New Mexico and Plains spadefoots. However, WM may cause extensive mortality among larvae of these species.     

Interference with xenobiotic metabolic activity by the commonly used vehicle solvents dimethylsulfoxide and methanol in zebrafish (Danio rerio) larvae but not Daphnia magna

Organic solvents, such as dimethylsulfoxide (DMSO) and methanol are widely used as vehicles to solubilise lipophilic test compounds in toxicity testing. However, the effects of such solvents upon innate detoxification processes in aquatic organisms are poorly understood. This study assessed the effect of solvent exposure upon cytochrome P450 (CYP)-mediated xenobiotic metabolism in Daphnia magna and zebrafish larvae (4 d post fertilisation). Adult D. magna were demonstrated to have a low, but detectable, metabolism of ethoxyresorufin in vivo and this activity was not modulated by pre-exposure to DMSO or methanol (24 h, up to 0.1% and 0.05% v/v, respectively). In contrast, the metabolism of ethoxyresorufin in zebrafish larvae was significantly reduced by both solvents (0.1% and 0.05% v/v, respectively) after 24 h of exposure. In zebrafish, these observed decreases in activity towards ethoxyresorufin were accompanied by decreased expression of a variety of genes coding for drug metabolising enzymes (corresponding to CYP1, CYP2, CYP3 and UDP-glucuronyl transferase [UGT] family enzymes), measured by quantitative PCR. Reduction of gene expression and CYP1 enzyme activities by methanol (0.05% v/v) in zebrafish larvae was partially reversed by co-exposure with Aroclor 1254 (100 μg L⁻¹). Overall this study suggests that relatively low concentrations of organic solvents can impact upon the biotransformation of certain xenobiotics in zebrafish larvae, and that this warrants consideration when assessing compounds for metabolism and toxicity in this species.     

Use of Co speciation and soil properties to explain variation in Co toxicity to root growth of barley (Hordeum vulgare L.) in different soils

The influence of soil properties on the bioavailability and toxicity of Co to barley (Hordeum vulgare L.) root elongation was investigated. Ten soils varying widely in soil properties were amended with seven doses of CoCl₂. Soil properties greatly influenced the expression of Co toxicity. The effective concentration of added Co causing 50% inhibition (EC₅₀) ranged from 45 to 863 mg kg⁻¹, representing almost 20-fold variation among soils. Furthermore, we investigated Co toxicity in relation to Co concentrations and free Co²⁺ activity in soil solution. The EC₅₀ values showed variation among soils of 17- and 29-fold, based on the Co concentration in soil solution and free Co²⁺ activity, respectively. Single regressions were carried out between Co toxicity threshold values and selected soil properties. Models obtained showed that soil effective cation exchange capacity (eCEC) and exchangeable calcium were the most consistent single predictors of the EC₅₀ values based on soil added Co.