Investigation of the aerosol structure over an urban area using a polarization lidar

The paper presents a lidar study of the aerosol structure in the planetary boundary layer in the case of radiation fog and haze. A conceptual model of the dynamics of the depolarization coefficient profile during the mixing layer development, taking into account the presence of a multilayered inversions and radiation fogs, is proposed. Various techniques are employed in the processing of the lidar signal in order to determine the mixing layer height as well as more details of the aerosol structure in the low atmosphere, namely, finding the maximum of the signal returned from the lowest temperature inversion, the crossing point of the S function's first derivative with the x axis, and profiles of the depolarization ratio. After the complete destruction of the stable stratification, a low constant value of the depolarization ratio within the newly formed mixing layer is being observed. The study of stable boundary layer disintegration and convective boundary layer formation in the presence of fogs and/or clouds is of both scientific and practical significance in what concerns the protection of the environment and the aviation meteorology.     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Influence of aerosol spectrum and air pollutants on fog formation in urban environment of megacity Delhi, India

Urban areas are facing increasing fog frequencies that may result due to increased air pollution emanating from variety of sources. The increased pollution levels may lead to the atmospheric reactions resulting into the formation of secondary pollutants that may also lead to increased aerosol number concentrations (ANC) in the atmosphere. This could cause enhanced water aerosols in the presence of favourable meteorological conditions and high relative humidity. This study deals with the atmospheric pollution and visibility during winter season of megacity Delhi in order to assess the relationship between the two specifically during fog episodes. Thus, this study analyses the levels of air pollutants, aerosol spectrum and meteorological conditions during one week each in the winter season of the years 2004 and 2006 in order to have an improved understanding of their role in fog formation in mega-city Delhi. More than 300 h of measurements which included episodes of dense, thick and moderate fogs of about 25 h, were studied. The measurements cover most of the accumulation mode and greater size spectrum of aerosols. Thus, the analysis is performed for the entire period, specifically, before the fog sets up, during and afterwards. In general, the relatively small variations in number concentration show larger variations in visibility prior and post dense fog formation than during dense fog episodes. Preliminary analysis of monthly averaged RSPM (Respirable Suspended particulate Matter or PM(10)) concentration values for four winter months for a period of 6 years (1996-2001) and visibility did not show a good correlation with total occurrences of fog. However, daily averaged RSPM concentration showed a good correlation with the occurrences of thick fog. Diurnal variation of Sulfur-dioxide and Nitrogen dioxide were found to have inverse relationship with visibility during fog which may be due to formation of secondary pollutants such as sulfate and to a lesser extent nitrates. Amongst, the daily averaged concentrations of all the criteria pollutants, RSPM was found to be best correlated with the fog in comparison to other pollutants.     

Air pollutants and the characterization of the organic content of aerosol particles in a mixed industrial/semi-rural area in central Italy

Both regulated and unregulated air pollutants were detected during an intensive seasonal sampling campaign in a mixed industrial/semi-rural area on the outskirts of Rome, Italy, at two sites located opposite a hospital waste incinerator, downwind according to the direction of the prevailing local winds. Concentrations of pollutants were significantly lower than in urban atmospheres. The composition of particulate organic material indicated a heavy biogenic impact, accompanied by a lower contribution from petroleum-related processes. Both PAH and nitro-PAH group compositions of particulates were used to assess the nature and relative importance of sources. Both sites showed that different and diffuse sources contributed to local pollution with a significant contribution from traffic, proving that the hospital waste incinerator was not the main pollution source in this area. Among unregulated compounds, a series of positional isomers of nitro-PAHs and other organic compounds associated with particulate matter were investigated. In particular, 1- and 3-nitrophenanthrene identification was carried out, and they proved to be the most abundant nitro-PAHs.     

Characteristics of malodor pollutants and aromatic VOCs around an urban valley in Korea

In this study, the environmental behavior of malodor pollutants (MPs) [including reduced sulfur compounds (RSCs)] and aromatic volatile organic compounds (AVOCs) were investigated around urban valley areas during several field campaigns (February through December 2006). The MPs measured in the study area include the RSCs (H(2)S, CH(3)SH, DMS, and DMDS), ammonia (NH(3)), and styrene (STY); the AVOCs include benzene (BEN), toluene (TOL), ethylbenzene (EB), m,p-xylene (MPX), and o-xylene (OX). The variation of most MP concentrations (except for DMDS) was found to be larger than that of AVOCs. It was found that STY (2,346 +/- 4,867 ppbv) was the most dominant MP followed by NH(3) (447 +/- 285), CH(3)SH (16 +/- 41), and the others (<8). The magnitude of AVOCs was found in the following descending order: TOL (1.4 +/- 2.2 ppbv), EB (1.0 +/- 2.1), MPX (0.9 +/- 2.0), and the others (<0.8). The concentration levels of most MPs on industrial (I) and downwind (D) sites were up to an order of magnitude higher than those at non-industrial (N) and upwind (U) sites. For most AVOCs, the former was ~3 times higher than the latter. For malodor intensity in RSCs, CH(3)SH was the dominant contributor. The concentration difference in target compounds between the sites/periods is likely to be caused by the combined effects such as emission sources, geographical features (e.g., semi-closed topography), and meteorological conditions (e.g., wind directions) in and outside the urban valley.     

区域环境噪声标准适用区域划分的定量化

根据国家环保局关于区域环境噪声环境划分的规定，提出了区域环境噪声标准定量化划分的模型，该模型综合了自然因素和噪声污染因素，模型在南通市区域环境噪声标准划分中得到了验证。     

Migration of pollutants in groundwater. II. adsorbable pollutants and numerical dispersion reduction

We discuss here the partial differential equations governing the migration of a decomposing pollutant adsorbing according to a Langmuir isotherm and undergoing 2-dimensional flow in a saturated aquifer. The equation governing the mass transfer of the pollutant to the surfaces within the aquifer are solved in closed form, permitting the use of larger values of the time increment t in the numerical integration of the dispersion-advection equation governing the behavior of the dissolved pollutant. In this numerical integration transverse numerical dispersion is eliminated by using conformal coordinates (velocity potential and stream function), and longitudinal numerical dispersion is very substantially reduced by use of an asymmetrical 4-point formula to represent the advection term. Some representative results are given as contour maps. The mass transfer rate coefficient is estimated as the least positive eigenvalue of a diffusion problem.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Polycyclic aromatic hydrocarbons in bulk PM2.5 and size-segregated aerosol particle samples measured in an urban environment

To analyze polycyclic aromatic hydrocarbons (PAHs) at an urban site in Seoul, South Korea, 24-hr ambient air PM_2.5 samples were collected during five intensive sampling periods between November 1998 and December 1999. To determine the PAH size distribution, 3-day size-segregated aerosol samples were also collected in December 1999. Concentrations of the 16 PAHs in the PM_2.5 particles ranged from 3.9 to 119.9 ng m⁻³ with a mean of 24.3 ng m⁻³.An exceptionally high concentration of PAHs(∼120 ng m⁻³) observed during a haze event in December 1999 was likely influenced more by diesel vehicle exhaust than by gasoline exhaust, as well as air stagnation, as evidenced by the low carbon monoxide/elemental carbon (CO/EC) ratio of 205 found in this study and results reported by previous studies. The total PAHs associated with the size-segregated particles showed unimodal distributions. Compared to the unimodal size distributions of PAHs with modal peaks at < 0.12 μm measured in highway tunnels in Los Angeles (Venkataraman and Friedlander, 1994), four- to six-ring PAHs in our study had unimodal size distributions, peaking at the larger size range of 0.28–0.53 μm, suggesting the coagulation of freshly emitted ultrafine particles during transport to the sampling site. Further, the fraction of PAHs associated with coarse particles(> 1.8 μm) increased as the molecular weight of the PAHs decreased due to volatilization of fine particles followed by condensation onto coarse particles.     

曲线拟合在环境空气污染物浓度预测中的应用

从分析环境空气污染物月均值的时间变化规律入手 ,找出与污染物变化特征相对应的数学函数 ,应用曲线拟合的方法 ,结合统计回归分析 ,建立曲线拟合方程。该方程可应用于污染物浓度的中长期预测     

Particle-bound polycyclic aromatic hydrocarbons in an urban, industrial and rural area in the western Mediterranean

Particle-bound PAHs were measured at three sites in southeastern Spain (an urban background location, a suburban-industrial site in the vicinity of two cement plants and a rural area) in order to investigate the influence of the type of location on PAH concentrations. A clear influence of cement production on particulate PAH levels could not be established since for the urban background and suburban-industrial sites the average concentrations of total PAHs in the PM2.5 fraction were very similar (1.085 and 1.151 ng m(-3), respectively), with benzo[b+k]fluoranthene and chrysene as the predominant compounds. Diagnostic ratios, used to identify PAH emission sources, pointed to traffic as the main source of particulate PAH at both locations. As expected, PAH levels at the rural site were significantly lower (0.408 ng m(-3) in the PM10 fraction) due to increasing distance from the emission sources. PAH seasonal variations at the urban background and suburban-industrial sites were the same as reported in many previous studies. Average winter to summer ratios for total PAHs were 4.4 and 4.9 for the urban background and industrial sites, in that order. This seasonal cycle could be partially explained by the higher temperature and solar radiation during summer enhancing PAH evaporation from the particulate phase and PAH photochemical degradation, respectively. The study of PAH distribution between the fine and coarse fraction at the urban site revealed that on average around 80% of total PAHs were associated with fine particles.     

Biogeochemical assessment of the urban area in Moscow

The biogeochemical and ecological assessment of the industrial city territory including urban soils and trees was carried out. Chemical (macroelement and microelement) composition of the city soils, morphological and biochemical properties of the linden leaves, possible impact of de-icing salts on soil and tree state, the correlation between the content of trace elements, and the S-containing plant compounds (phytochelatins) were included in the assessment. It was found that concentrations of trace elements in the soils near road with intensive traffic are changed from the soils, located at a distance of 40–50 m from the road. They have higher concentrations of As, Fe, Mn, Se, and Sr and lower concentration of Zn. The linden leaves from the roadside were characterized by the increase in As, Cu, Fe, Zn, and Cr and sharp decrease in the Mn and Sr concentrations. The analysis of soil water extracts showed a slight decrease of pH and low content of Ca, Mg, K, and Na for the distant sites. The phytochelatin test of linden leaves was weakly effective as well as asymmetry degree study of leaf lamina. The main differences were observed in the damage symptoms of leaves (chlorosis and necrosis) and the content of pigments (chlorophyll and carotenoids). The biochemical and ecological assessment of soils and trees showed relatively satisfactory ecological state of the investigated area in Moscow. The data obtained shows the weak local impact of the application of de-icing salts and automobile emissions.     

Acidic and basic properties and buffer capacity of airborne particulate matter in an urban area of Beijing

Particles with aerodynamic diameters <10  $\upmu $ m (PM₁₀) and particles with aerodynamic diameters <2.5  $\upmu $ m (PM_2.5) were sampled during summer 2006 in Beijing and mass concentrations, water-soluble ionic compounds concentrations, and acidic buffer capacity were analyzed. Results show that the mass concentration ranges of PM₁₀ and PM_2.5 were from 56.4 to 226.6  $\upmu $ g/m³ and from 31.3 to 200.7  $\upmu $ g/m³ during sampling days, respectively. Concentrations of F^???, Cl^???, NO $_{3}^{\,\,-}$ , NO $_{2}^{\,\,-}$ , SO $_{4}^{\,\,2-}$ , Ac^???, Ca^2?+?, Na^?+?, K^?+?, Mg^2?+?, and NH $_{4}^{\,\,+}$ in particles were analyzed by ion chromatography. Microtitration was adapted to determine the acidic?Cbasic property and the change of the buffering systems in different pH of the aqueous solution in which the PM is suspended. The major alkalinity and buffer capacity of particles were analyzed and calculated. The average carbonate buffer capacity was 0.3 mmol/g in PM_2.5 and 0.7 mmol/g in PM₁₀. The average acetic acid buffer capacity was 0.1 mmol/g in PM_2.5 and 0.3 mmol/g in PM₁₀. Carbonate and acetic acid are the main species for the buffer capacity in the particle phase. The average mass of carbonate was 71.0 mg/g in PM₁₀ and 46.7 mg/g in PM_2.5. The average mass of acetic acid was 11.2 mg/g in PM_2.5 and 20.0 mg/g in PM₁₀.     

Bioavailability of iodine in the UK-Peak District environment and its human bioaccessibility: an assessment of the causes of historical goitre in this area

Iodine is an essential micronutrient for human health. Its deficiency causes a number of functional and developmental abnormalities such as goitre. The limestone region of Derbyshire, UK was goitre-endemic until it declined from the 1930s and the reason for this has escaped a conclusive explanation. The present study investigates the cause(s) of goitre in the UK-Peak District area through an assessment of iodine in terms of its environmental mobility, bioavailability, uptake into the food chain and human bioaccessibility. The goitre-endemic limestone area is compared with the background millstone grit area of the UK-Peak District. The findings of this study show that ‘total’ environmental iodine is not linked to goitre in the limestone area, but the governing factors include iodine mobility, bioavailability and bioaccessibility. Compared with the millstone grit area, higher soil pH and calcium content of the limestone area restrict iodine mobility in this area, also soil organic carbon in the limestone area is influential in binding the iodine to the soil. Higher calcium content in the limestone area is an important factor in terms of strongly fixing the iodine to the soil. Higher iodine bioaccessibility in the millstone grit than the limestone area suggests that its oral bioaccessibility is restricted in the limestone area. Iodine taken up by plant roots is transported freely into the aerial plant parts in the millstone grit area unlike the limestone area, thus providing higher iodine into the human food chain in the millstone grit area through grazing animals unlike the goitre-prevalent limestone area.     

区域环境影响评价中有关污染物本底值的研究与确定

阐述了环境影响评价中大气污染物本底值对评价结果的影响 ,提出了现有污染源对各控制点的浓度贡献值应该包括污染源对各控制点的浓度值和控制点大气环境因子本底值等内容 ;并对大气污染物本底值及其计算方法提出独到见解     

Application of flow cytometry and cell sorting to the bacterial analysis of environmental aerosol samples

Flow cytometry (FCM) combined with viability staining is a useful tool in discerning viable bacteria in environmental samples where traditional culture methods may fail. Contamination of aerosol samples with dust and other non-biological particles can interfere with accurate sample analysis and therefore there is a desire to exclude those particles from analysis. Particles were sorted according to their light scattering properties, cultured and isolates obtained. Isolates were cultured in suspension and reanalyzed by flow cytometry. The isolates were also analyzed and identified by DNA sequence analysis. Isolates with statistically similar light scattering properties shared common sequence identification. Isolates exhibited distinct light scattering profiles that roughly correlated with their originating gate, but often the peak of the profile was outside that gate.     

苏州城区河道水质现状分析

跟踪了苏州城区内27个重点河流断面半年的监测数据,重点监测了溶解氧、氨氮、总磷、高锰酸盐指数4个富营养化指标。计算了各种污染物单因子污染指数、主要污染物分担率和平均污染指数,并对水质污染程度进行综合评价。结果表明,在苏州城区河道的27个重点监测断面中,大部分属于中度污染,水体的主要污染物为溶解氧、氨氮和总磷。分析了可能导致城区河道水体污染的主要原因,并提出治理建议。     

关于县级地区工业废水污染物排放总量监测的几点建议

对县级地区工业废水污染物排放总量监测存在的问题进行了分析,并提出了相应的对策和建议。     

北京城区春季空气污染物垂直分布与气象条件观测分析

分析了北京城区春季污染物 (SO2 、NOX)垂直分布与相应的气象条件之间的关系 ,结果表明 ,不同高度的 SO2 浓度差异不显著 ,而不同高度的 NOX 浓度有明显的差异 ,知春路低层浓度高于中、高层 ,潘家园则是低层低于中、高层。一日中 ,特别是当无大的天气系统影响 ,地面呈典型的山谷风日变化时不同高度的 SO2 和 NOX浓度均呈明显的峰谷变化。工作日污染物浓度比休息日浓度高 50 %。