The influence of geographic location on population exposure to emissions from power plants throughout China

This analysis seeks to evaluate the influence of emission source location on population exposure in China to fine particles and sulfur dioxide. We use the concept of intake fraction, defined as the fraction of material or its precursor released from a source that is eventually inhaled or ingested by a population. We select 29 power-plant sites throughout China and estimate annual average intake fractions at each site, using identical source characteristics to isolate the influence of geographic location. In addition, we develop regression models to interpret the intake fraction values and allow for extrapolation to other sites. To model the concentration increase due to emissions from selected power plants, we used a detailed long-range atmospheric dispersion model, CALPUFF. Primary fine particles have the highest average intake fraction (1 x 0(-5)), followed by sulfur dioxide (5 x 10(-6)), sulfate from sulfur dioxide (4 x 10(-6)), and nitrate from nitrogen oxides (4 x 10(-6)). For all pollutants, the intake fractions span approximately an order of magnitude across sites. In the regression analysis, the independent variables are meteorological proxies (such as climate region and precipitation) and population at various distances from the source. We find that population terms can explain a substantial percentage of variability in the intake fraction for all pollutants (R(2) between 0.86 and 0.95 across pollutants), with a significant modifying influence of meteorological regime. Near-source population is more important for primary coarse particles while population at medium to long distance is more important for primary fine particles and secondary particles. A significant portion of intake fraction (especially for secondary particles and primary fine particles) occurs beyond 500 km of the source, emphasizing the need for detailed long-range dispersion modeling. These findings demonstrate that intake fractions for power plants in China can be estimated with reasonable precision and summarized using simple regression models. The results should be useful for informing future decisions about power-plant locations and controls.     

Radioactivity from coal-fired power plants: A review

The radioactivity contents of coal and of the different types of ash formed during its combustion are reviewed. Also, the radiological impact of coal-fired plants and the plant features causing this impact are discussed. The depletion or enrichment of radionuclides in the different types of ash is interpreted in terms of the combustion temperature, the size of ash particles and the chemical forms of the radionuclides. The volatilization-condensation process as the postulated mechanism of radionuclide enrichment is also discussed.Past studies of the release of radionuclides from coal-fired plants are compared and the environmental pathways of the radionuclides are highlighted. Individual and collective radiation doses calculated for various coal-fired plants are evaluated and the importance of the different pathways to man is outlined.     

Escaping radioactivity from coal-fired power plants (CPPs) due to coal burning and the associated hazards: a review

Coal, like most materials found in nature, contains trace quantities of the naturally occurring primordial radionuclides, i.e. of ⁴⁰K and of ²³⁸U, ²³²Th and their decay products. Therefore, the combustion of coal results in the released into the environment of some natural radioactivity (1.48 TBq y⁻¹), the major part of which (99 %) escapes as very fine particles, while the rest in fly ash. The activity concentrations of natural radionuclides measured in coals originated from coal mines in Greece varied from 117 to 435 Bq kg⁻¹ for ²³⁸U, from 44 to 255 Bq kg⁻¹ for ²²⁶Ra, from 59 to 205 Bq kg⁻¹ for ²¹⁰Pb, from 9 to 41 Bq kg⁻¹ for ²²⁸Ra (²³²Th) and from 59 to 227 Bq kg⁻¹ for ⁴⁰K. Fly ash escapes from the stacks of coal-fired power plants in a percentage of 3-1% of the total fly ash, in the better case. The natural radionuclide concentrations measured in fly ash produced and retained or escaped from coal-fired power plants in Greece varied from 263 to 950 Bq kg⁻¹ for ²³⁸U, from 142 to 605 Bq kg⁻¹ for ²²⁶Ra, from 133 to 428 Bq kg⁻¹ for ²¹⁰Pb, from 27 to 68 Bq kg⁻¹ for ²²⁸Ra (²³²Th) and from 204 to 382 Bq kg⁻¹ for ⁴⁰K. About 5% of the total ash produced in the coal-fired power plants is used as substitute of cement in concrete for the construction of dwellings, and may affect indoor radiation doses from external irradiation and the inhalation of radon decay products (internal irradiation) is the most significant. The resulting normalized collective effective doses were 6 and 0.5 man-Sv (GW a)⁻¹ for typical old and modern coal-fired power plants, respectively.     

Possible underestimations of risks for the environment due to unregulated emissions of biocides from households to wastewater

The aim of this study was to investigate the role of household products as possible sources of biocidal active substances in municipal wastewater and their regulation under the Biocidal Products Regulation (EU) 528/2012. In 131 households, we investigated the prevalence of products used to control pests, washing and cleaning agents and select personal care products with high release to wastewater. Inventories of these products were established with the help of barcode scanning. All uses of biocidal active substances were evaluated regarding their assessment under the Biocidal Products Regulation.2963 products were scanned in total, with 48% being washing and cleaning agents, 43% personal care products and 9% products used to control pests. Biocidal active substances were found in each household. These were observed primarily in washing and cleaning agents and personal care products (90%), while only a small percentage of the observations of biocidal active substances was in biocidal products. 64% of the observations of biocidal active substances were in applications that do not fall under the Biocidal Products Regulation and are thus not subject to its environmental risk assessment.This study shows clearly that risks for the environment are underestimated because unregulated emissions to wastewater occur. It demonstrates that there are gaps in the current chemical legislation that lead to a release of substances into wastewater that were not subject to environmental risk assessment under the Biocidal Products Regulation. This is one example of the limitations of scientific risk assessment of chemicals – its complexity is immense. From our point of view, the results underline the importance of a sustainable use of the substances as this is the only way to decrease yet unidentified risks.     

Atmospheric releases from fossil fuel power plants in the United States

This paper contains detailed data on atmospheric emissions from power plants with a capacity of more than 25 MW electric in the United States. The data are gathered from utility files as presented to the U.S. Environmental Protection Agency. Pollutants covered are CO, NO_x, SO_x3, particulates, and total hydrocarbons. The data indicate that in 1977 about 420×10⁹ kg coal, 84×10⁶ m³ oil, and 65×10⁶ m³ of natural gas were used to generate electricity. Pollutants generated were 2×10⁹kg particulates, 17×10⁹ kg SO₂, 6×10⁹ kg NO_x, 78×10⁶ kg hydrocarbons and 0.3×10⁶ kg of CO.     

Assessment, validation and intercomparison of operational models for predicting tritium migration from routine discharges of nuclear power plants: the case of Loire River

During last decades, a number of projects have been launched to validate models for predicting the behaviour of radioactive substances in the environment. The project of the "Aquatic" working group of the project EMRAS (Environmental Modelling for Radiation Safety) organised by the International Atomic Energy Agency (IAEA) was based on the validation and assessment of models for predicting the behaviour of radionuclides in the aquatic ecosystems. The present paper describes a blind test of models aimed at assessing the dispersion of tritium releases in the Loire River (France), on a large domain ( approximately 350km) and on a period of six months, by comparing the results obtained by operational-to-experimental values of tritium concentration at Angers, a city along the Loire River. The common conclusion is that the models used by the different participants namely 1D models and models based on a schematic hydraulic (box models) are reliable tools for tritium transport modelling. Nevertheless, the importance of proper and detailed hydrological data for the appropriate prediction of pollutant migration in water is demonstrated by the example provided during this study.     

Strategies of heavy metal uptake by plants growing under industrial emissions

Total concentrations of Al, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Pb and Zn have been estimated in soil (A-horizon) and in leaves and stem samples of two Mediterranean species (Nerium oleander L. and Pinus pinea L.) growing in an industrial area in Spain (Huelva). Both species showed a different behaviour for the elements studied. Bark and leaves of both species acted as excluders of Al, Ba, Cr, Fe and Pb, N. oleander acted as indicator of Cu and Zn and, needles and bark of P. pinea behaved as accumulators of Cu. The enrichment ratio data indicated that Cu in soil and plant was enhanced with anthropogenic activities, with industrial activities being the primary contributor for Cu. All the other elements studied were controlled by natural source variations, but Pb could also be anthropogenically enhanced. Wood did not accumulate pollutants, with the translocation from bark being rather reduced. Uptake patterns of metals into foliage and bark tissues were more or less the same in both species for almost all the studied elements, which indicates that both plant parts could be indifferently used as biomonitors.     

Assessment of ecotoxicological risks related to depositing dredged materials from canals in northern France on soil

The implementation of an ecological risk assessment framework is presented for dredged material deposits on soil close to a canal and groundwater, and tested with sediment samples from canals in northern France. This framework includes two steps: a simplified risk assessment based on contaminant concentrations and a detailed risk assessment based on toxicity bioassays and column leaching tests. The tested framework includes three related assumptions: (a) effects on plants (Lolium perenne L.), (b) effects on aquatic organisms (Escherichia coli, Pseudokirchneriella subcapitata, Ceriodaphnia dubia, and Xenopus laevis) and (c) effects on groundwater contamination. Several exposure conditions were tested using standardised bioassays. According to the specific dredged material tested, the three assumptions were more or less discriminatory, soil and groundwater pollution being the most sensitive. Several aspects of the assessment procedure must now be improved, in particular assessment endpoint design for risks to ecosystems (e.g., integration of pollutant bioaccumulation), bioassay protocols and column leaching test design.     

Dispersion of 222Rn from two New Zealand geothermal power plants

The dispersion of ²²²Rn from emitted waste gases at Wairakei geothermal power station, New Zealand, is modelled. It is concluded that resulting concentrations in the nearby township of Taupo will never exceed the maximum permissible in any meteorological situation. The greatest possible accumulation is calculated to be less than one eighth of the normal background radon concentration. A more realistic set of assumptions predicts long-term mean concentrations about 4% of background levels. A new geothermal power station, Ohaaki, a factor of three times more distant, is calculated to produce ten times lower concentrations than Wairakei. Measurements using a few passive solid-state radon detectors show that the natural variation of radon concentrations greatly exceeds any calculated contribution from either geothermal station; hence, much of the radon is probably due to more local minor sources. Local sources have increased due to draw-off of ground water by the Wairakei station. Thus, there could be some indirect contribution to radon concentrations by its operation. The measured six-month integrated mean radon concentration at Taupo is a significant fraction of the maximum permissible concentration. It seems likely that natural sources alone may lead to levels in air which are above the maximum when temperature inversion exists. It is concluded that these two geothermal power plants are unlikely to produce concentrations of radon hazardous to the population or to plant workers.     

An industrial hygiene characterization of exposure to diesel emissions in an underground coal mine

Problems exist in the United States' effort to achieve energy self-sufficiency. Increasing coal production to assure energy self-sufficiency is a prime problem for the rest of the century and beyond. The use of diesels in underground coal mines has been suggested as a mining method to aid in this needed, increased production. Many questions exist about the effects on humans in such environments. NIOSH Division of Respiratory Disease Studies has undertaken a research effort to characterize the environments of existing diesel coal mines. The results of one of the studies will be presented. Preliminary assessments of carbon monoxide, nitrogen dioxide, C₁-C₅ aldehydes and organic acids, aliphatic hydrocarbons, sulfates, total and respirable dust, and polycyclic aromatic hydrocarbons (PAH) are presented. Nitrogen dioxide and total aldehydes are suggested as possible species to quantify diesel exposure.     

Assessment of groundwater quality impacts due to use of coal combustion byproducts to control subsidence from underground mines

Coal combustion byproducts are to be placed in an underground coal mine to control subsidence. The materials were characterized to determine potential groundwater impacts. No problems were found with respect to heavy or toxic metals. Coal combustion byproduct leachates are high in dissolved solids and sulfates. Chloride and boron from fly ash may also leach in initially high concentrations. Because the demonstration site is located beneath deep tight brine-bearing aquifers, no problems are anticipated at the demonstration site.     

Rare earth elements in fly ashes created during the coal burning process in certain coal-fired power plants operating in Poland - Upper Silesian Industrial Region

The subject of the study covered volatile ashes created during hard coal burning process in ash furnaces, in power plants operating in the Upper Silesian Industrial Region, Southern Poland. Coal-fired power plants are furnished with dust extracting devices, electro precipitators, with 99-99.6% combustion gas extracting efficiency. Activity concentrations ofTh-232, Ra-226, K-40, Ac-228, U-235 and U-238 were measured with gamma-ray spectrometer. Concentrations of selected rare soil elements (La, Ce, Nd, Sm, Y, Gd, Th, U) were analysed by means of instrumental neutron activation analysis (INAA). Mineral phases of individual ash particles were identified with the use of scanning electron microscope equipped with EDS attachment. Laser granulometric analyses were executed with the use of Analyssette analyser. The activity of the investigated fly-ash samples is several times higher than that of the bituminous coal samples; in the coal, the activities are: 226Ra - 85.4 Bq kg⁻¹, 40 K-689 Bq kg⁻¹, 232Th - 100.8 Bq kg⁻¹, 235U-13.5 Bq kg⁻¹, 238U-50 Bq kg⁻¹ and 228Ac - 82.4 Bq kg⁻¹.     

Continuous and semi continuous measurements of dust emissions in a power plant burning fuel-oil

Some aspects of the suitability of continuously and semi continuously measuring dust emissions with a transmissometer and a beta dust meter were studied at a power plant burning fuel oil. Extinction values were automatically calibrated with the weight of the dust.Data based on gas velocity were selected in six groups and regression analyses were taken between the extinction values and the emissions of dust. A significant regression curve was found in only three of the six groups.These experiments showed that a given mass concentration of dust may correspond with a great variety of extinction values when the particle size changes, so that a correlation between the emitted dust and extinction is valid only when particle size is constant.     

Condenser cooling technologies for concentrating solar power plants: a review

Environment, Development and Sustainability - Selection of condenser cooling technology can affect the financial as well as technical viability of concentrating solar power (CSP) plants. Detailed...     

Microbial ecology of soils surrounding nuclear and thermal power plants in Taiwan

This paper reports a study of the effect of three nuclear and one thermal power plants on the microbial ecology of soils. Populations of bacteria, actinomycetes, fungi, cellulolytic microbes, phosphate-solubilizing microbes and nitrogen-fixing microbes in the soil in the vicinity of each plant were studied. Soils were acidic at three sites, and moisture contents of the power plant soils were lower than those of the surrounding areas. Microbial populations of the topsoils (0-20 cm deep) were higher than the subsoils (21-40 cm deep), and only 10-15% of them showed significant difference (P < .05). Thirty-three percent of the samples from the surrounding areas had higher microbial population than those from the power plant areas, but 19% was the reverse. Populations of cellulolytic, phosphate-solubilizing and nitrogen-fixing microbes varied with sampling locations, season and environmental conditions. Ratios of cellulolytic, phosphate-solubilizing and nitrogen-fixing microbes to total viable counts in some samples of the surrounding areas were significantly higher than in the power plant areas. Although the microbial populations of power plant soil and its surrounding area were somewhat different, it cannot be attributed as an effect of power plant operation, as the differences were not consistent.     

The use of the event tree in the design of nuclear power plants

This paper describes a system of computer codes used for the generation and the analysis of event trees. These codes can be used to analyze event trees of 1,000 to 10,000 events and allow individualization of all the event sequences that lead to each accidental condition, within given probability intervals. They also provide a check for the correctness of the model, and assure the exhaustivity of the analysis and of its logical implications. Moreover, the methods assist in the solution of the fault tree that is developed, taking each plant's accidental condition as a top event and individualizing all the event sequences that lead to it. These codes also show, in the performance (capability and reliability) definition phase, the conditions of success for a system or a component, both in operation or on call. Some results of these methods as they apply to the safety risk analysis of a research program in the nuclear field (supersara program) are described.     

Search for long-term radiation trends in the environs of Swiss nuclear power plants

Annually since 1989, biannually since 1994 the sites of the Swiss nuclear facilities are surveyed flying the same survey lines by airborne gamma ray spectrometry. The equipment and the data processing software used for those surveys were built and developed at the Institute of Geophysics, ETH Zurich. For mapping the ground radiation around the nuclear facilities, a pixel representation and a modified spectrum dose index (SDI) method are used. In the search for long-term trends, the local dose rates are calculated first and in turn the net dose rates. So far, no change in the radiation levels was detected over the last 13 years outside of the fenced sites of the nuclear facilities and, especially, no artificial radioactivity was present that could not be explained by nuclear weapon tests or by the Chernobyl event.     

REDD+项目中不确定性对森林碳减排量的影响研究

减少砍伐和退化所致排放(REDD+)项目旨在通过采取各种政策方法和积极的激励措施,以帮助发展中国家减少砍伐和森林退化,同时还包括森林保护、森林可持续经营以及增加森林碳信用。在REDD+项目实施过程中,对于碳减排量的准确监测与度量是一个非常重要的步骤,而不确定性问题的普遍存在将可能对碳减排量产生影响。本文通过建立一个包含REDD+项目开发商和代理人两个博弈者的动态博弈模型,通过对动态博弈模型的仿真研究,分析了不确定性对利益相关者收益以及森林碳减排量的影响。研究结果表明,不确定性会使得森林碳减排量增加,以弥补因不确定性所导致的低估量。同时,不确定性的增加也会导致碳排放量的补偿支付价格增长。由于不确定性只会对代理人补贴产生影响,而不会影响开发商补贴,因而向开发商提高补贴更能促进利益相关者的利润增加。并且不确定性越大效果越明显,因此在未来向开发商而非代理人提供补贴才是政策制定者的最佳选择。由于REDD+项目中除了能给开发商和代理人带来收益之外,还以可以增进全社会环境和生态福利水平,而这种外部收益在"森林碳信用"的市场价格中并未得到完全体现,因此需要政策制定者为REDD+项目提供经济激励以弥补这种外部收益。政策制定者选用补贴模式时应优先考虑基于开发商补贴建立公平有效的激励机制。同时,为保证资金被完全用于REDD+的项目之中,并被负责任地按照预期目标使用,因此需要建立能满足国际标准的良好财政治理机制以预防腐败和欺诈,促进REDD+项目的成功实施。     

Investigations of methane emissions from rice cultivation in Indian context

The increasing demand of the growing population requires enhancement in the production of rice. This has a direct bearing on the global environment since the rice cultivation is one of the major contributors to the methane emissions. As the rice cultivation is intensified with the current practices and technologies, the methane fluxes from paddy fields will substantially rise. Improved high yielding rice varieties together with efficient cultivation techniques will certainly contribute to the curtailment of the methane emission fluxes. In this paper, the system dynamic approach is used for estimating the methane emissions from rice fields in India till the year 2020. Mitigation options studied for curtailing the methane emissions include rice production management, use of low methane emitting varieties of rice, water management and fertilizer amendment. The model is validated quantitatively and sensitivity tests are carried out to examine the robustness of the model.