自来水厂不同净水工艺对持久性有机物的去除效果试验研究

以多环芳烃和有机氯农药作为有机物评价指标,对某自来水厂常规处理加深度处理工艺,即混凝-沉淀-过滤-炭吸附处理工艺的去除效果评价,并对几种深度处理技术展望.结果表明,检出多环芳烃和有机氯农药均未超出生活饮用水标准(2006)的限值.在研究的净水工艺中,深度处理工艺炭滤对多环芳烃和有机氯农药的去除效果较为理想.强化混凝、臭氧 活性炭和纳滤膜技术是水厂未来经济可行的处理工艺.     

应用表面活性剂-生物柴油微乳液去除污染土壤中多环芳烃

针对修复焦化厂高浓度多环芳烃污染土壤高成本的现实,采用以非食用性植物油、生物柴油、表面活性剂及其乳化合成的微乳液为淋洗剂,比较不同淋洗剂的淋洗效果。结果表明乳化合成的微乳液对焦化厂土壤中多环芳烃的总去除率高于单独使用表面活性剂为淋洗剂对土壤中多环芳烃的总去除率,说明生物柴油及植物油与表面活性剂乳化形成的微乳液对原污染土壤中的多环芳烃具有显著的增溶作用。1%TW-80和2.5%TW-80对土壤中多环芳烃总去除率分别为11%和14%;以2.5%TW-80为原料乳化合成的微乳液的淋洗去除率较以1%TW-80为原料乳化合成的微乳液高,总去除率分别为15%～30%和11%～18%;以生物柴油为原料乳化合成的微乳液的淋洗去除率较以植物油为原料乳化合成的微乳液高,分别为17%～30%和15%～23%,且对多环芳烃的去除率与其辛醇水分配系数(logKow)呈线性相关关系。     

微波辐射回用活性炭对水中亚甲基蓝和Cd2＋去除效果的研究

考察了微波-活性炭联合处理技术对模拟染料废水中亚甲基蓝和Cd2＋的去除效果。对于100 mL浓度为1 000 mg/L的亚甲基蓝溶液、活性炭用量为10 g时,新活性炭对亚甲基蓝的去除率为99.99%;采用700 W微波对吸附亚甲基蓝的活性炭辐射10 min进行再生并回用,经微波辐射再生10次后活性炭对亚甲基蓝的去除率为99.68%,未经微波作用反复使用10次的活性炭对亚甲基蓝的去除率为85.41%。结果表明：微波处理有效地减缓了活性炭吸附能力的下降速率,实现了活性炭再生和反复使用。在吸附过程中,Cd2＋使活性炭对亚甲基蓝的吸附能力略有下降,而共存的亚甲基蓝则促进了活性炭对Cd2＋的吸附,对新炭和再生后活性炭物理化学特性的表征证明了活性炭对亚甲基蓝的吸附为物理吸附,对Cd2＋的吸附为化学吸附。     

微波辐射回用活性炭对水中亚甲基蓝和Cd~(2+)去除效果的研究

考察了微波-活性炭联合处理技术对模拟染料废水中亚甲基蓝和Cd2+的去除效果。对于100 mL浓度为1 000 mg/L的亚甲基蓝溶液、活性炭用量为10 g时,新活性炭对亚甲基蓝的去除率为99.99%;采用700 W微波对吸附亚甲基蓝的活性炭辐射10 min进行再生并回用,经微波辐射再生10次后活性炭对亚甲基蓝的去除率为99.68%,未经微波作用反复使用10次的活性炭对亚甲基蓝的去除率为85.41%。结果表明:微波处理有效地减缓了活性炭吸附能力的下降速率,实现了活性炭再生和反复使用。在吸附过程中,Cd2+使活性炭对亚甲基蓝的吸附能力略有下降,而共存的亚甲基蓝则促进了活性炭对Cd2+的吸附,对新炭和再生后活性炭物理化学特性的表征证明了活性炭对亚甲基蓝的吸附为物理吸附,对Cd2+的吸附为化学吸附。     

载钛活性炭电吸附去除Cr(Ⅵ)的研究

采用sol-gel法制备了载钛活性炭,并用于电吸附处理含铬废水.当Cr(Ⅵ)初始浓度为20 mg/L时,载钛活性炭上施加1.2 V的正向电压,电吸附3 h后的处理水水质满足国家排放标准.研究了载钛活性炭电吸附去除Cr(Ⅵ)的影响因素及TiAC的电脱附再生.     

生物活性炭法深度处理印染废水及其生物毒性的表征

采用负载经驯化后微生物的活性炭深度处理实际印染废水,研究生物活性炭系统中存在的生物相及其降解有机污染物的作用,并表征了处理后印染废水的生物毒性。结果表明,生物相中含有草履虫、轮虫及钟虫等原生动物。随着运行次数的增加,活性炭反应器在运行5次后出水的COD、NH3-N及色度去除率骤降,但是生物活性炭处理后出水的COD、NH3-N及色度去除率缓慢下降。生物活性炭能很好地降解印染废水中的苯酚类和稠环芳烃污染物。本研究中生物活性炭反应器对氨氮和COD的去除符合一级动力学方程,去除动力学常数分别为1.02和0.96。经过生物活性炭的处理可以将印染废水的生物毒性降到适于小球藻生长的水平。     

吸附法净化低浓度废气实验研究

本文探讨了用活性炭吸附低浓度苯类废气时,空塔气速和气流在吸附层的接触时间对吸附过程的影响;研究了活性炭在已经吸附若干质量的苯类物质以后的吸附性能.据此绘制了空塔气建-吸附效率和活性炭含苯率-吸附效率等关系曲线,并进行了活性炭再生的研究.研究表明:使用活性炭可以有效地净化低浓度苯类废气.     

微波辅助-活性炭法处理电厂EDTA锅炉清洗废水可行性研究

采用微波辅助-活性炭法处理电厂EDTA锅炉清洗废水,研究了微波辐射时间、微波功率以及再生次数对活性炭吸附能力的影响,并根据实验结果设计了工艺流程,分析了微波辅助-活性炭法处理电厂EDTA锅炉清洗废水的可行性.研究表明,微波辅助-活性炭法处理EDTA清洗废水的最佳微波辐射时间和微波功率分别为5 min和680 W,微波辐...     

生物柴油基微乳液的制备及其对钢铁厂多环芳烃污染土壤的修复性能

针对场地土壤中高浓度多环芳烃较难去除的问题,利用微乳液具有界面张力低、增溶能力强和体系稳定的特点,制备了污染土壤淋洗修复剂。采用表面活性剂、助表面活性剂、生物柴油为主要组分制备微乳液,优化微乳液最佳组分配比及制备条件,并比较表面活性剂、复配表面活性剂、生物柴油和微乳液等不同类型淋洗剂对钢铁厂污染土壤中多环芳烃的去除效果。结果表明,最佳微乳液组分及pH条件为：7.7% Tween-80、7.7% TX-100、15.4%正丁醇、20.5%生物柴油、pH=7。在不同类型的淋洗剂中,微乳液淋洗剂对多环芳烃的去除率最高(89.7%),显著高于其他类型淋洗剂的效果。多环芳烃的去除率与淋洗剂和土壤的液固比、洗脱振荡时间等有关,确定的微乳液最佳修复条件为：液固比为4∶1、洗脱振荡时间为8 h。按混合表面活性剂与生物柴油比为6∶4制备的微乳液洗脱效果最佳。本研究结果可为高效去除污染土壤中多环芳烃打下基础。     

人工湿地处理系统中多环芳烃的行为

采用Oasis HLB柱固相萃取的前处理技术,以气相色谱质谱联用仪(GC/MS)的分析方法,对我国北方永定河上游黑土洼人工湿地中多环芳烃污染的特征以及分布规律进行了研究.结果表明,该湿地系统以低环数多环芳烃污染为主,其中浓度最高的是菲和蒽,未检出高环数(5环、6环)多环芳烃.通过比较进水和出水的浓度,湿地系统总体上不能有效去除进水中的多环芳烃.但是比较不同工艺单元进出水浓度,复氧、植物根系及微生物等均影响到多环芳烃的去除效果,去除率在28%～65%之间.     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

实验室质量管理体系内部审核的策划

在实施ISO／IEC 17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核策划阶段的关键环节，提出审核范围确定、审核计划和抽样方案制订的质量控制要求，为有序高效地实施内部审核提供了技术方法。     

Characterization of products of ozonolysis of acrylonitrile in liquid phase

In order to elucidate the reaction mechanism of the ozonolysis of acrylonitrile in the liquid phase, characterization of reaction products has been attempted. One of the products, which was volatile, has been found to be formaldehyde by derivatizing with dimedone. The infrared and mass spectra of the derivative corresponded with that of alkylidene dimedone. Three other reaction products were isolated by TLC using silica gel, CHCl₃:MeOH (80:20). These have been tentatively identified as glyoxal, epoxide of acrylonitrile and acetamide from their mass spectra. Based on these findings a reaction pathway for the formation of formaldehyde is proposed to be that described by Criegee.