高低温条件下碳纤维增强尼龙复合材料的老化特征分析

目的分析不同试验条件下碳纤维增强尼龙复合材料的性能变化规律,获得该种材料在高温和低温条件下的老化特征。方法对制备的碳纤维增强尼龙复合材料拉伸样和缺口冲击样,开展高温和低温试验,定期测试其拉伸、冲击性能,分析各试验条件下力学性能的变化趋势,总结该材料的老化特征。结果几种试验条件下均未造成该材料外观损伤,冲击强度出现了前期升高后期降低的变化趋势,而拉伸强度前期略微降低,随着试验进行逐渐升高。结论碳纤维增强尼龙复合材料在高温和低温条件下无明显的外观老化特征,而力学性能在高温16天后材料会呈现出较缓慢的热老化趋势。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。     

航空用碳纤维增强树脂基复合材料低温环境下弯曲性能变化研究

目的研究航空用碳纤维增强中温固化环氧脂基复合材料单向层压板在低温环境下不同试验方式弯曲性能的变化规律。方法通过改变压头半径、跨厚比、以及压头与试样之间有无塑料薄膜衬垫等试验方式,研究-50℃低温环境下不同试验方法弯曲性能的变化规律。结果低温环境下,不同的试验方式对碳纤维增强树脂基复合材料弯曲性能测试数据的影响有所不同。当使用塑料薄膜衬垫时,会显著降低试样上表面压头部位的应力集中,在低温环境下试样弯曲性能变化最低;当压头半径减小时,低温环境对试样弯曲性能影响最显著。结论如需测量温度对试样弯曲性能的影响,建议选择压头半径较小,无塑料薄膜衬垫,跨厚比L/h为32:1的试验方案。     

ABS塑料低压低温气候环境适应性快速评价方法

目的 研究采用新型低气压环境综合加速试验技术开展ABS塑料低气压低温环境适应性试验的模拟性和加速性.方法 对比开展新型低气压环境综合加速试验与低气压低温自然环境试验,分析ABS塑料在两种环境试验中的老化机理、拉伸强度和简支梁缺口冲击强度变化规律的相似性,进一步采用加速转换因子(ASF)法处理试验数据,分析新型低气压环境...     

碳纤维环氧复合材料盐雾老化试验研究

采用中性盐雾条件模拟海洋大气环境进行了加速老化试验,研究了碳纤维环氧复合材料在海洋气候中的耐久性.分析了该复合材料经盐雾老化试验后的质量、层间剪切强度和弯曲强度的变化,结合湿热老化机理,研究了其老化规律.结果表明,随着试验时间的增加,复合材料的吸湿量增加,力学强度下降,表现出塑性特征.在吸湿最初阶段对力学性能影响最大,...     

温度对编织复合材料层合厚板冲击性能的影响研究

目的 研究室温和低温下编织复合材料层合厚板的冲击性能。方法 通过开展低速冲击试验和冲击后的压缩试验,对冲击响应曲线、冲击损伤容貌、压缩失效模式和剩余压缩强度进行分析,探讨冲击时的环境温度对编织复合材料层合厚板冲击性能的影响。结果 冲击后的编织复合材料层合厚板存在凹坑、分层、基体裂纹和纤维断裂等多种失效模式,压缩失效模式主要表现为横贯冲击损伤区域截断式破坏失效。结论 低温环境增强基体强度,降低了复合材料的冲击损伤程度,从而提高编织复合材料结构的剩余压缩强度。     

聚甲醛耐候性研究

研究了自然老化和人工加速老化试验中聚甲醛力学性能的变化规律,考察了人工加速老化与自然老化试验的相关性。结果表明：光、热、水的综合作用是造成聚甲醛力学性能显著下降的主要原因;聚甲醛的断裂伸长率和缺口冲击强度对材料老化十分敏感,老化初期就显著下降;热老化无法模拟自然老化中聚甲醛力学性能变化规律,而试验中紫外灯光老化所采用的试验条件可模拟海拉尔、苍山等自然环境条件下聚甲醛力学性能变化规律,但对海南、广州等具有强日照、高温、高湿、多雨的自然环境模拟效果不好。     

碳纤维环氧复合材料的加速腐蚀老化试验方法

碳纤维环氧复合材料是目前飞机制造中主要使用的结构材料,其在使用过程中可能会遇到各种环境,如雨雪、阳光、盐雾等,这些都能引起碳纤维环氧复合材料的腐蚀老化。主要介绍了海洋环境下碳纤维环氧复合材料的3种加速腐蚀老化的试验方法,即湿热老化试验、盐雾试验、人工气候老化试验。     

燃气轮机用YS10-021聚酰亚胺三防试验验证分析

目的 研究湿热、盐雾、霉菌环境对YS10-021聚酰亚胺材料性能的影响,为燃气轮机选材设计和定寿、延寿提供数据支撑。方法 设计开展YS10-021聚酰亚胺三防试验,定期测试试样老化后的物理性能,并对试验数据进行统计分析。结果 经3552h湿热试验后,高温拉伸强度和高温弯曲强度下降24%,仍然符合出厂指标要求;常温弯曲强度下降34%,简支梁冲击强度下降62%,超出指标要求;其他各项性能未见明显老化。经3 552 h盐雾试验后,弯曲强度下降30%,其余性能均在出厂指标要求范围以内。经84 d霉菌试验后,YS10-021聚酰亚胺各项性能均有轻微下降趋势,但老化不明显。结论 YS10-021聚酰亚胺在湿热、盐雾、霉菌环境中的耐受性良好。总体来看,湿热和盐雾环境对YS10-021聚酰亚胺力学性能的影响更大。     

严酷海洋大气环境下玻璃纤维复合材料腐蚀老化规律研究

目的 研究严酷海洋大气环境下,玻璃纤维增强树脂基复合材料的腐蚀老化规律.方法 通过实海大气环境试验,分析了南海岛礁大气环境下,复合材料暴露不同周期后的腐蚀形貌特征以及力学性能变化规律,建立了腐蚀老化性能预测灰色模型GM(1,1),并与青岛、厦门和三亚等典型海洋大气环境进行对比研究.结果 随暴露时间的增长,南海岛礁大气环境下的复合材料发生严重的纤维裸露,其弯曲强度呈下降趋势,基于弯曲强度建立的灰色模型GM(1,1)精度达到1级;与其他典型海洋大气环境相比,随着纬度的降低,复合材料的弯曲强度呈下降趋势.结论 灰色模型GM(1,1)对复合材料在岛礁等严酷海洋大气环境下的腐蚀老化性能预测精度较高.影响复合材料性能的最主要环境因素为辐照,其次为相对湿度和温度.     

Toxic effects of acetochlor, methamidophos and their combination on nifH gene in soil

Toxic effects of two agrochemicals on nifH gene in agricultural black soil were investigated using denaturing gradient gel electrophoresis （DGGE） and sequencing approaches in a microcosm experiment. Changes of soil nifH gene diversity and composition were examined following the application of acetochlor, methamidophos and their combination. Acetochlor reduced the nifH gene diversity （both in gene richness and diversity index values） and caused changes in the nifH gene composition. The effects of acetochlor on nifH gene were strengthened as the concentration of acetochlor increased. Cluster analysis of DGGE banding patterns showed that nifH gene composition which had been affected by low concentration of acetochlor （50 mg/kg） recovered firstly. Methamidophos reduced nifH gene richness that except at 4 weeks. The medium concentration of methamidophos （150 mg/kg） caused the most apparent changes in nifH gene diversity at the first week while the high concentration of methamidophos （250 mg/kg） produced prominent effects on nifH gene diversity in the following weeks. Cluster analysis showed that minimal changes of nifH gene composition were found at 1 week and maximal changes at 4 weeks. Toxic effects of acetochlor and methamidophos combination on nifH gene were also apparent. Different nifH genes （bands） responded differently to the impact of agrochemicals： four individual bands were eliminated by the application of the agrochemicals, five bands became predominant by the stimulation of the agrochemicals, and four bands showed strong resistance to the influence of the agrochemicals. Fifteen prominent bands were partially sequenced, yielding 15 different nifH sequences, which were used for phylogenetic reconstructions. All sequences were affiliated with the alpha- and beta-proteobacteria, showing higher similarity to eight different diazotrophic genera.     

Arsenic uptake by arbuscular mycorrhizal maize （Zea mays L.） grown in an arsenic-contaminated soil with added phosphorus

The effects of arbuscular mycorrhizal (AM) fungus (Glomus mosseae) and phosphorus (P) addition (100 mg/kg soil) on arsenic (As) uptake by maize plants (Zea mays L.) from an As-contaminated soil were examined in a glasshouse experiment.Non-mycorrhizal and zero-P addition controls were included.Plant biomass and concentrations and uptake of As,P,and other nutrients,AM colonization,root lengths,and hyphal length densities were determined.The results indicated that addition of P significantly inhibited root colonization and development of extraradical mycelium.Root length and dry weight both increased markedly with mycorrhizal colonization under the zero-P treatments,but shoot and root biomass of AM plants was depressed by P application.AM fungal inoculation decreased shoot As concentrations when no P was added,and shoot and root As concentrations of AM plants increased 2.6 and 1.4 times with P addition,respectively.Shoot and root uptake of P,Mn,Cu,and Zn increased,but shoot Fe uptake decreased by 44.6%,with inoculation, when P was added.P addition reduced shoot P,Fe,Mn,Cu,and Zn uptake of AM plants,but increased root Fe and Mn uptake of the nonmycorrhizal ones.AM colonization therefore appeared to enhance plant tolerance to As in low P soil,and have some potential for the phytostabilization of As-contaminated soil,however,P application may introduce additional environmental risk by increasing soil As mobility.     

Degradation of metabolites accumulated of benzo[a]pyrene by coupling Penicillium Chrysogenum with KMnO4

Several main metabolites of benzo[a]pyrene （BaP） formed by Penicillium chrysogenum, Benzo[a]pyrene-1,6-quinone （BP 1,6- quinone）, trans-7,8-dihydroxy-7,8-dihydrobenzo[a]pyrene （BP 7,8-diol）, 3-hydroxybenzo[a]pyrene （3-OHBP）, were identified by high-performance liquid chromatography （HPLC）. The three metabolites were liable to be accumulated and were hardly further metabolized because of their toxicity to microorganisms. However, their further degradation was essential for the complete degradation of BaP. To enhance their degradation, two methods, degradation by coupling Penicillium chrysogenum with KMnO4 and degradation only by Penicillium chrysogenum, were compared; Meanwhile, the parameters of degradation in the superior method were optimized. The results showed that （1） the method of coupling Penicillium chrysogenum with KMnO4 was better and was the first method to be used in the degradation of BaP and its metabolites; （2） the metabolite, BP 1,6-quinone was the most liable to be accumulated in pure cultures; （3） the effect of degradation was the best when the concentration of KMnO4 in the cultures was 0.01% （w/v）, concentration of the three compounds was 5 mg/L and pH was 6.2. Based on the experimental results, a novel concept with regard to the bioremediation of BaP-contaminated environment was discussed, considering the influence on environmental toxicity of the accumulated metabolites.     

Impact of atrazine and nitrogen fertilizers on the sorption of chlorotoluron in soil and model sorbents

Sorption of chlorotoluron in ammonium sulfate, urea and atrazine multi-solutes system was investigated by batch experiments. The results showed application of nitrogen fertilizers to the soil could affect the behavior of chlorotoluron. At the same concentration of N, sorption of chlorotoluron decreased as the concentration of atrazine increased on the day 0 and 6 in soil, respectively. The sorption of chlorotoluron increased from 0 to 6 d when soils were preincubated with deionized water, ammonium sulfate and urea solution for 6 d. That indicated incubation time was one of the most important factors for the sorption of chlorotoluron in nitrogen fertilizers treatments. The individual sorption isotherms of chlorotoluron in rubbery polymer and silica were strictly linear in single solute system, but there were competition sorption between pesticides or between pesticides and nitrogen fertilizers. That indicated the sorption taken place by concurrent solid-phase dissolution mechanism and sorption on the interface of water-organic matter or water-mineral matter.     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

Effects of two sludge application on fractionation and phytotoxicity of zinc and copper in the soil

The potential harm of heavy metals is a primary concern in application of sludge to the agricultural land. A pot experiment was conducted to evaluate the effect of two sludges on fractionation of Zn and Cu in soil and their phytotoxicity to pakchoi. The loamy soil was mixed with 0%, 20%, 40%, 60% and 80% (by weight) of digested sewage sludge (SS) and composted sludge (SC). The additions of both sludges caused a significant raise in all fractions, resulting in that exchangeable (EXCH) and organic bound (OM) became predominance of Zn and organic bound Cu occupied the largest portion. There was more available amount of Zn and Cu in SS treatments than SC treatments. During the pot experiment, the concentration of Zn in EXCH, carbonate (CAR) and OM and Cu in EXCH and OM fractions decreased in all treatments, so their bioavailability reduced. Germination rate and plant biomass decreased when the addition rate was high and the best yield appeared in 20% mixtures at the harvest of pakchoi. The two sludges increased tissue contents of Zn and Cu especially in the SS treatments. Zn in pakchoi was not only in relationship to ΔEXCH and ΔCAR forms but also in ΔOM forms in the sludge-soil mixtures. Tissue content of Cu in pakchoi grown on SC-soils could not be predicted by ΔEXCH. These correlation rates between Zn and Cu accumulation in pakchoi and variation of different fractions increased with time, which might indicate that sludges represented stronger impacts on the plant in long-term land application.     

Intraspecific differences in effects of co-contamination of cadmium and

A hydroponic experiment was carried out to study intraspecific differences in the effects of different concentrations of cadmium (Cd)(0-10 mg/L) and arsenate (As(V)) (0-8 mg/L) on the growth parameters and accumulation of Cd and As in six wheat varieties Jing-9428, Duokang-1, Jingdong-11, Jing-411, Jingdong-8 and Zhongmai-8. The endpoints of wheat seedlings, including seed germination,biomass, root length and shoot height, decreased with increasing the Cd and As concentrations. Significant differences in seed germination, biomass, root length, shoot height and the accumulation of Cd and As were observed between the treatments and among the varieties (p ＜ 0.05). The lethal dosage 50% were about 20, 80, 60, 60, 80 and 20 mg As/L for Jing-9428, Duokang-1, Jingdong-11,Jing-411, Jingdong-8 and Zhongmai-8, respectively, and the corresponding values for Cd were about 30, 80, 20, 40, 60 and 10 mg Cd/L, respectively. Among the six varieties, Duokang-1 was found to be the most resistant to Cd and As toxicity, and Zhongmai-8 was the most sensitive to Cd and As co-contamination. The resistance of the six varieties was found dependant on the seedling uptake of Cd and As. Duokang-1 was the most suitable for cultivation in Cd and As co-contaminated soils.     

Removal of heavy metals from sewage sludge by low costing chemical method and recycling in agriculture

ＲｅｍｏｖａｌｏｆｈｅａｖｙｍｅｔａｌｓｆｒｏｍｓｅｗａｇｅｓｌｕｄｇｅｂｙｌｏｗｃｏｓｔｉｎｇｃｈｅｍｉｃａｌｍｅｔｈｏｄａｎｄｒｅｃｙｃｌｉｎｇｉｎａｇｒｉｃｕｌｔｕｒｅＷｕＱｉｔａｎｇ，ＮｙｉｒａｎｄｅｇｅＰａｓｃａｓｉｅ，ＭｏＣｅｈｕｉＦ...     

Isolation and preliminary characterization of a 3-chlorobenzoate degrading bacteria

A study was conducted to compare the diversity of 2-, 3-, and 4-chlorobenzoate degraders in two pristine soils and one contaminated sewage sludge. These samples contained strikingly different populations of mono-chlorobenzoate degraders. Although fewer cultures were isolated in the uncontaminated soils than contaminated one, the ability of microbial populations to mineralize chlorobenzoate was widespread. The 3- and 4-chlorobenzoate degraders were more diverse than the 2-chlorobenzoate degraders. One of the strains isolated from the sewage sludge was obtained. Based on its phenotype, chemotaxonomic properties and 16S rRNA gene, the organism S-7 was classified as Rhodococcus erythropolis. The strain can grow at temperature from 4 to 37℃. It can utilize several （halo）aromatic compounds. Moreover, strain S-7 can grow and use 3-chlorobenzoate as sole carbon source in a temperatures range of 10-30℃ with stoichiometric release of chloride ions. The psychrotolerant ability was significant for bioremediation in low temperature regions. Catechol and chlorocatechol 1,2-dioxygenase activities were present in cell free extracts of the strain, but no （chloro）catechol 2,3- dioxygenase activities was detected. Spectral conversion assays with extracts from R. erythropolis S-7 showed accumulation of a compound with a similar UV spectrum as chloro-cis,cis-muconate from 3-chlorobenzoate. On the basis of these results, we proposed that S-7 degraded 3-chlorobenzoate through the modified ortho-cleave pathway.     

Single and joint effects of pesticides and mercury on soil urease

The influence of two pesticides including chlorimuron-ethyl and furadan and mercury （Hg） on urease activity in 4 soils （meadow burozem and phaeozem） was investigated. The soils were exposed to various concentrations of the two pesticides and Hg individually and simultaneously. Results showed that there was a close relationship between urease activity and organic matter content in soil. Chlorimuron-ethyl and furadan could both activate urease in the 4 soils. The maximum increment of urease activity by chlorimuronethyl was up to 14%-18%. There was almost an equal increase （up to 13%-21%） in the urease activity by furadan. On the contrary, Hg markedly inhibited soil urease activity. A logarithmic equation was used to describe the relationship （P〈0.05） between the concentration of Hg and the activity of soil urease in the 4 tested soils. Semi-effect dose （ED50） values by the stress of Hg based on the inhibition of soil urease in the 4 soils were 88, 5.5, 24 and 20 mg/kg, respectively, according to the calculation of the corresponding equations. The interactive effect of chlorimuron-ethyl or furadan with metal Hg on soil urease was mainly synergic at the highest tested concentrations.