Heavy metals in agricultural soils of the Pearl River Delta,South China

There is a growing public concern over the potential accumulation of heavy metals in agricultural soils in China owing to rapid urban and industrial development and increasing reliance on agrochemicals in the last several decades. Excessive accumulation of heavy metals in agricultural soils may not only result in environmental contamination, but elevated heavy metal uptake by crops may also affect food quality and safety. The present study is aimed at studying heavy metal concentrations of crop, paddy and natural soils in the Pearl River Delta, one of the most developed regions in China. In addition, some selected soil samples were analyzed for chemical partitioning of Co, Cu, Pb and Zn. The Pb isotopic composition of the extracted solutions was also determined. The analytical results indicated that the crop, paddy and natural soils in many sampling sites were enriched with Cd and Pb. Furthermore, heavy metal enrichment was most significant in the crop soils, which might be attributed to the use of agrochemicals. Flooding of the paddy soils and subsequent dissolution of Mn oxides may cause the loss of Cd and Co through leaching and percolation, resulting in low Cd and Co concentrations of the paddy soils. The chemical partitioning patterns of Pb, Zn and Cu indicated that Pb was largely associated with the Fe-Mn oxide and residual fractions, while Zn was predominantly found in the residual phase. A significant percent fraction of Cu was bound in the organic/sulphide and residual phases. Based on the 206Pb/207Pb ratios of the five fractions, it was evident that some of the soils were enriched with anthropogenic Pb, such as industrial and automobile Pb. The strong associations between anthropogenic Pb and the Fe-Mn oxide and organic/sulphide phases suggested that anthropogenic Pb was relatively stable after deposition in soils.     

Elemental composition of Tibetan Plateau top soils and its effect on evaluating atmospheric pollution transport

The Tibetan Plateau (TP) is an ideal place for monitoring the atmospheric environment of low to mid latitudes. In total 54 soil samples from the western TP were analyzed for major and trace elements. Results indicate that concentrations of some typical “pollution” elements (such as As) are naturally high here, which may cause incorrect evaluation for the source region of these elements, especially when upper continental crust values are used to calculate enrichment factors. Because only particles <20 μm are transportable as long distances, elemental concentrations of this fraction of the TP soils are more reliable for the future aerosol related studies over the TP. In addition, REE compositions of the TP soils are unusual, highly characteristic and can be used as an effective index for identifying dust aerosol from the TP.     

Heavy and toxic metals in staple foodstuffs and agriproduct from contaminated soils

This article presents basic data on the content of Cr, Fe, Ni, Cu, Zn, As, Cd, Sb, Hg, and Pb in staple foodstuffs and agriproduct grown in Russia (Astrakhan region and the town of Belovo) and Egypt (Helwan region). The dependence of the concentration of metals in agriproducts on the content and chemical form of existence in irrigation water and soils is indicated.     

Heavy metals in urban soils of East St. Louis, IL, Part I: Total concentration of heavy metals in soils

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produce organic and inorganic chemicals, and petroleum refineries. A protocol for soil analysis was developed to produce sufficient information on the extent of heavy metal contamination in East St. Louis soils. Soil cores representing every borough of East St. Louis were analyzed for heavy metals--As, Cd, Cu, Cr, Hg, Ni, Pb, Sb, Sn, and Zn. The topsoil contained heavy metal concentrations as high as 12.5 ppm Cd, 14,400 ppm Cu, ppm quantities of Hg, 1860 ppm Pb, 40 ppm Sb, 1130 ppm Sn, and 10,360 ppm Zn. Concentrations of Sb, Cu, and Cd were well correlated with Zn concentrations, suggesting a similar primary industrial source. In a sandy loam soil from a vacated rail depot near the bank of the Mississippi River, the metals were evenly distributed down to a 38-cm depth. The clay soils within a half-mile downwind of the Zn smelter and Cu products company contained elevated Cd (81 ppm), Cu (340 ppm), Pb (700 ppm), and Zn (6000 ppm) and displayed a systematic drop in concentration of these metals with depth. This study demonstrates the often high concentration of heavy metals heterogeneously distributed in the soil and provides baseline data for continuing studies of heavy metal soil leachability.     

Heavy metals incidence in the application of inorganic fertilizers and pesticides to rice farming soils

The concentrations of Cd, Co, Cu, Ni, Pb, Zn, Fe and Mn in different inorganic fertilizers (urea, calcium superphosphate, iron sulphate and copper sulphate) and in pesticides (two herbicides and one fungicide) are evaluated together with the contribution of these metals in soils from their use. The study was made in rice farming areas to the north of Albufera Natural Park (Valencia, Spain). The results obtained show that superphosphate is the fertilizer that contains the highest concentrations of Cd, Co, Cu and Zn as impurities. Copper sulphate and iron sulphate have the most significant concentrations of Pb, and are the only fertilizers in which Ni was detected. The three pesticides analysed show similar Cd contents and the highest levels of Fe, Mn, Zn, Pb and Ni are found in the herbicides. The most significant additions of heavy metals as impurities that soil receives from agricultural practices, are Mn, Zn, Co and Pb. Three contamination indexes have been applied to provide a basis for comparison of potential heavy metal toxicity. These results denote the potential toxicity of heavy metals in the studied soils.     

Heavy metals in agricultural soils from Piedmont,Italy. Distribution,speciation and chemometric data treatment

The distribution and speciation of heavy metals in five agricultural soils of Piedmont Region (north-western Italy) were investigated. Ten metals, namely Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Ti and Zn were considered. Analytical determinations were performed by atomic emission or atomic absorption spectroscopy after microwave sample dissolution in acid solution. Total metal concentrations fit in the typical concentration ranges for unpolluted soils, with the exception of cadmium and lead content in some horizons. The effect of sampling depth on concentrations was discussed. Speciation studies were carried out by applying Tessier's procedure, which allows to subdivide the total metal content into five fractions, representing portions bound to different components of the soil. Moreover, the element labilities in two soils were evaluated by extraction with EDTA. Correlations among the variables and/or similarities among the sampling points were identified by principal component analysis and hierarchical cluster analysis.     

Heavy metals in soils along unpaved roads in south west Cameroon: Contamination levels and health risks

Soils enriched with heavy metals from vehicular emission present a significant exposure route of heavy metals to individuals using unpaved roads. This study assessed the extent of Cd, Cr, Co, Cu, Ni, Pb and Zn contamination of soils along unpaved roads in Cameroon, and the health risks presented by incidental ingestion and dermal contact with the soils using metal contamination factor (CF) pollution load index, hazard quotients (HQ) and chronic hazard index (CHI). CF values obtained (0.9–12.2) indicate moderate to high contamination levels. HQ values for Cr, Cd and Pb exceeded the reference doses. Moderate health hazard exists for road users in the areas with intense anthropogenic activities and high average daily traffic (ADT) volume according to CHI values (1–4) obtained. The economy and quality of life in cities with unpaved roads could be threatened by health challenges resulting from long-term exposure to heavy metal derived from high ADT volumes.     

Heavy metals in zooplankton from the Southern Baltic

Samples of zooplankton and suspended matter were collected using a Bongo net (0.33/0.50 mm mesh net), and Nucleopore filters, respectively, from the Southern Baltic off Poland. Major classes of zooplankton, and selected heavy metals (Fe, Co, Ni, Mn, Pb, Cd, Cu, Zn, Cr) were determined in the collected samples. Concentrations of heavy metals in zooplankton were corrected for metals contributed by particulate matter adhering to zooplankton organisms. Heavy metals levels measured in nearshore samples (Bay of Gdańsk, Pomeranian Bay) were higher than those in the samples from the open sea. The only exception was cadmium exhibiting larger concentrations in the offshore as compared to the nearshore samples (0.8 vs. 1.3 microg/g d.w.). This was attributed to decreased concentrations, of both dissolved and particulate cadmium, caused by algal bloom. Larger concentrations of heavy metals in the Bay of Gdańsk in comparison with the Pomeranian Bay (e.g. Cd-1.3 vs. 0.8 microg/g, Cu-20.5 vs. 8.3 microg/g, Pb-12.9 vs. 1.2 microg/g, Cr-12.4 vs. 1.4 microg/g) were attributed to the direct discharge of the Vistula river to the Bay of Gdańsk, while the Pomeranian Bay receives the Odra river runoff indirectly, via the Szczecin Lagoon. The nonlinear estimation of the data set was used to evaluate concentrations of heavy metals in Copepoda and Cladocera. Copepoda proved to be enriched with heavy metals in comparison with Cladocera.     

Heavy metals in plants and phytoremediation

GOAL, SCOPE AND BACKGROUND: In some cases, soil, water and food are heavily polluted by heavy metals in China. To use plants to remediate heavy metal pollution would be an effective technique in pollution control. The accumulation of heavy metals in plants and the role of plants in removing pollutants should be understood in order to implement phytoremediation, which makes use of plants to extract, transfer and stabilize heavy metals from soil and water. METHODS: The information has been compiled from Chinese publications stemming mostly from the last decade, to show the research results on heavy metals in plants and the role of plants in controlling heavy metal pollution, and to provide a general outlook of phytoremediation in China. Related references from scientific journals and university journals are searched and summarized in sections concerning the accumulation of heavy metals in plants, plants for heavy metal purification and phytoremediation techniques. RESULTS AND DISCUSSION: Plants can take up heavy metals by their roots, or even via their stems and leaves, and accumulate them in their organs. Plants take up elements selectively. Accumulation and distribution of heavy metals in the plant depends on the plant species, element species, chemical and bioavailiability, redox, pH, cation exchange capacity, dissolved oxygen, temperature and secretion of roots. Plants are employed in the decontamination of heavy metals from polluted water and have demonstrated high performances in treating mineral tailing water and industrial effluents. The purification capacity of heavy metals by plants are affected by several factors, such as the concentration of the heavy metals, species of elements, plant species, exposure duration, temperature and pH. CONCLUSIONS: Phytoremediation, which makes use of vegetation to remove, detoxify, or stabilize persistent pollutants, is a green and environmentally-friendly tool for cleaning polluted soil and water. The advantage of high biomass productive and easy disposal makes plants most useful to remediate heavy metals on site. RECOMMENDATIONS AND OUTLOOK: Based on knowledge of the heavy metal accumulation in plants, it is possible to select those species of crops and pasturage herbs, which accumulate fewer heavy metals, for food cultivation and fodder for animals; and to select those hyperaccumulation species for extracting heavy metals from soil and water. Studies on the mechanisms and application of hyperaccumulation are necessary in China for developing phytoremediation.     

Heavy metals in soils: distribution, relationship with soil characteristics and radionuclides and multivariate assessment of contamination sources

The study is dealing with the distribution and the origin of heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) in soils from a priori non-polluted areas. Positive correlations with organic matter and clay content but not with pH have been observed for most of elements analyzed in this study. Correlations of some metals (Cr, Pb and Zn) and radionuclides (238U and 137Cs) observed for analyzed soils could be explained by their common affinity for clay minerals. Enrichment factor (EF) analysis and cluster analysis (CA) highlighted the lithogenic origin of Cr, Cu, Mn, Ni, Pb and Zn and pointed out the primary input of Cd from anthropogenic sources. It also revealed the need for detailed geochemical surveys in the future in order to decrease the uncertainty of discrimination between lithogenic and anthropogenic origin of metals of interest.     

Heavy metals in sediments,soils, and aquatic plants from a secondary anabranch of the three gorges reservoir region,China

We investigated the occurrence of cadmium (Cd), copper (Cu), chromium (Cr), nickel (Ni), lead (Pb), Znic (Zn), iron (Fe), manganese (Mn), and magnesium (Mg) in sediments, as well as in related soils and aquatic plants in the Liangtan River, a typical secondary anabranch of the Yangtze River in the Three Gorges Reservoir Region (TGRR) of China. We found that sediments accumulated more metals than soils and aquatic plants. Concentrations of the nine metals in sediments and soils followed the same sequence, while their concentrations in aquatic plants followed a different sequence. Potential adverse effects of contaminated sediments on benthic fauna were evaluated, and the results showed that the toxic effect on benthic organisms followed the sequence Zn?>?Ni?>?Cr?>?Cu?>?Cd?>?Pb. The potential ecological risk index analysis indicated that Cd in sediments had considerable ecological risk, whereas Cr, Cu, Zn, Ni, and Pb had low ecological risk. The potential ecological risk index (RI) of the heavy metals in sediments of the Liangtan River was 174.9, indicating moderate ecological risk. The transfer factor trend of metals for aquatic plants showed that Cd and Ni had the most and least accumulation, respectively. For Cu, Cd, Mg, Pb, and Cr, a significant positive correlation of the metal concentrations was observed between sediments and soils, but no correlations (excluding Cr) were detected between sediments and aquatic plants. Our study indicated that anthropogenic input may be the primary source of metal contamination in the Liangtan River, and that Zn and Cd pollution in the Liangtan River should be further explored.     

Heavy metals and couple fecundity, the LIFE Study

The effect of heavy metals at environmentally relevant concentrations on couple fecundity has received limited study despite ubiquitous exposure. In 2005-2009, couples (n = 501) desiring pregnancy and discontinuing contraception were recruited and asked to complete interviews and to provide blood specimens for the quantification of cadmium (μg L⁻¹), lead (μg dL⁻¹) and mercury (μg L⁻¹) using inductively coupled plasma-mass spectrometry. Couples completed daily journals on lifestyle and intercourse along with menstruation and pregnancy testing for women. Couples were followed for 12 months or until pregnant. Fecundability odds ratios (FORs) and 95% confidence intervals (CIs) were estimated adjusting for age, body mass index, cotinine, and serum lipids in relation to female then male exposures. FORs <1 denote a longer time to pregnancy. In adjusted models, reduced FORs were observed for both female cadmium (0.78; 95% CI 0.63-0.97) and male lead (0.85; 95% CI 0.73-0.98) concentrations. When jointly modeling couples’ exposures, only male lead concentration significantly reduced the FOR (0.82; 95% CI 0.68, 0.97), though the FOR remained <1 for female cadmium (0.80; 95% CI 0.64, 1.00). This prospective couple based cohort with longitudinal capture of time to pregnancy is suggestive of cadmium and lead’s reproductive toxicity at environmentally relevant concentrations.     

Heavy metals in urban soils of East St. Louis, IL. Part II: Leaching characteristics and modeling

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produced organic and inorganic chemicals, and petroleum refineries. Following a gross assessment of heavy metals in the community soils (see Part I of this two-part series), leaching tests were performed on specific soils to elucidate heavy metal-associated mineral fractions and general leachability. Leaching experiments, including the Toxicity Characteristic Leaching Procedure (TLCP) and column tests, and sequential extractions, illustrated the low leachability of metals in East St. Louis soils. The column leachate results were modeled using a formulation developed for fly ash leaching. The importance of instantaneous dissolution was evident from the model. By incorporating desorption/adsorption terms into the source term, the model was adapted very well to the time-dependent heavy metal leachate concentrations. The results demonstrate the utility of a simple model to describe heavy metal leaching from contaminated soils.     

Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

Fenton氧化技术处理稠油污染土壤

利用Fenton氧化技术对稠油污染土壤进行氧化处理,分析对后续微生物修复的促进作用。向1 000 g石油类含量为8%的稠油污染土壤中加入10.0 mL 18 mmol/L Fe2+溶液与10.0 mL 30%H2O2,反应时间为2 h。氧化处理后土壤中石油烃的总去除率可达到31.38%,胶质去除率为45.22%,沥青质去除率为51.26%,胶质的分子量由1 841下降到1 472,沥青质的分子量由5 831下降到5 073。Fenton氧化可使土壤酶活、各类微生物的数量及呼吸强度有不同程度的下降,但在氧化后30 d内,土壤各类微生物数量都超过了原有水平,其中细菌数量最高达到9.84×105CFU/g,是氧化前的数量的1.57倍。以上实验结果表明,Fenton氧化可以有效去除土壤中胶质和沥青质,并且使土壤中微生物的生长速率加快。因此,Fenton氧化能够促进后续的微生物修复。     

Relationship between the extractable metals from soils and metals taken up by maize roots and shoots

Two extraction procedures, i.e. a single extraction procedure using low-molecular-weight-organic-acids (LMWOAs) as extractant and a sequential extraction procedure recommended by the European Community Bureau of Reference (BCR), were performed to extract metal fractions from wet rhizosphere soil. And the extracted soil solutions were further fractionated as colloidal and truly dissolved fractions. Heavy metals in maize roots were experimentally defined as metals adsorbed on cell wall and metals taken up by cross-membrane by washing with CaCl(2). The correlation coefficients between extractable metals from soil and taken up by maize roots and shoots were compared between two extraction methods, and a good correlation was obtained if LMWOAs were used. In contrast, the correlation coefficients were poor when the BCR method was used.     

Remediation of heavy metals contaminated soils by ball milling

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.