Modelling of time-varying dispersion for elevated pressurised releases without rainout

Many commonly used atmospheric dispersion models are limited to continuous or instantaneous releases only, and cannot accurately simulate time-varying releases. The current paper discusses a new enhanced dispersion formulation accounting for time-varying effects resulting from a pressure drop in a vessel or pipe, and presuming no rainout. This new formulation is implemented in the Unified Dispersion Model (UDM), and is planned to be included in a future version of Phast.First existing methods are summarised for modelling finite-duration and time-varying releases, and limitations of these methods are identified.Secondly the new mathematical model is summarised. The new formulation presumes a number of ‘observers’ to be released at successive times from the point of discharge. The UDM carries out pseudo steady-state calculations for each observer, where the release data correspond to the time at which the observer is released. Subsequently the model applies a correction to the observer concentrations to ensure mass conservation when observers move with different velocities. Finally effects of along-wind diffusion (due to ambient turbulence) are included by means of Gaussian integration over the downwind distance. This results in reduced concentrations while the cloud travels in the downwind direction.The benefits of the new UDM methodology are illustrated for the case of a H₂S toxic release from a long pipeline representative of some extremely sour fields in the Middle East that are now being developed. Using corrected observer concentrations and along-wind diffusion significantly reduces toxic effect distances when compared to the current Phast 7.1 approach.     

Are dispersion models suitable for simulating small gaseous chlorine releases?

Dispersion models are mostly validated on the basis of historical dispersion experiments. The latter imply large quantities of hazardous products (flammable or toxic gases), and are dedicated to study the dispersion of the resulting clouds on great distances from the source to reach a better knowledge of the different phases of gas dispersion (slumping, creeping, passive dispersion…).However, dispersion models have hardly been validated on small releases and therefore require more validation on small plumes of dangerous gases. Indeed, what is their reliability in case of accidents involving small amounts (e.g., chlorine leakages at swimming pools’ installations), and for small distances downwind the gas source? This information is of prime interest in so far as small releases are more likely to occur than larger ones.This paper reports on chlorine small-scale dispersion experiments and deals with the comparison between experimental data of ground level concentrations in the plume and predicted concentrations obtained from several dispersion models.     

Assessing the influence of real releases on explosions: Selected results from large-scale experiments

The research activities in the project Assessing the Influence of Real Releases on Explosions (AIRRE) included a unique series of large-scale explosion experiments with high-momentum jet releases directed into congested geometries with subsequent ignition. The primary objective for the AIRRE project was to gain improved understanding of the effect that realistic releases and turbulent flow conditions have on the consequences of accidental gas explosions in the petroleum industry. A secondary objective was to develop a methodology that can facilitate safe and optimal design of process facilities. This paper presents selected results from experiments involving ignition of a highly turbulent gas cloud, generated by a large-scale, pressurised release of natural gas. The paper gives an overview of the effect on maximum explosion overpressures of varying the ignition position relative to the release point of the jet and a congested region placed inside the flammable cloud, with either a high or a medium level of congestion. For two of the tests, involving a jet release and the medium congestion rig, the maximum overpressures significantly exceeded those obtained in a quiescent reference test. The paper presents detailed results for selected tests and discusses the effect of the initial flow field generated by realistic releases – including turbulence, net flow and concentration gradients – on relevant explosion phenomena.     

The use of water sprays for mitigating chlorine gaseous releases escaping from a storage shed

Accidental releases of toxic gases in partially confined spaces, like a storage shed, can sometimes be controlled by water sprays. This paper presents the results of experimental field tests during which various water sprays were used to mitigate chlorine gaseous releases. The releases (source strength: 1–4 kg/min) simulated a loss of containment occurring at an industrial chlorine storage installation (5 m³). The mitigation performances of different water sprays were investigated for diverse configurations, and under various atmospheric conditions. The best chlorine concentration reduction was achieved close to the source by a mobile upward water spray, with a maximum concentration reduction of a factor 10 at a distance of 5 m downstream from the source, and for a release flow rate of about 2 kg/min. The good performances of a fixed downward flat fan water spray were also pointed out (mean concentration reduction of a factor 2–5 for the whole series of experiments carried out), with an optimum of effectiveness at a distance of 10 m downstream from the source. In low wind speed conditions (U₁₀<1 m/s), the downward flat fan water spray was more effective for weak release flow rates. The mitigation effectiveness by absorption remained slight (<3%).     

Validation of discharge and atmospheric dispersion for unpressurised and pressurised carbon dioxide releases

This paper discusses the validation of discharge and subsequent atmospheric dispersion for both unpressurised and pressurised carbon dioxide releases using the consequence modelling package Phast.The paper first summarises the validation of the Phast dispersion model (UDM) for unpressurised releases. This includes heavy gas dispersion from either a ground-level line source (McQuaid wind-tunnel experiments) or an area source (Kit-Fox field experiments). For the McQuaid experiments minor modifications of the UDM were made to support line sources. For the Kit Fox experiments steady-state and 20-s finite-duration releases were simulated for both neutral and stable conditions. Most accurate predictions of the concentrations for finite duration releases were obtained using the UDM Finite Duration Correction method.Using experiments funded by BP and Shell and made available via DNV's CO2PIPETRANS JIP, the paper secondly summarises the validation of the Phast discharge and dispersion models for pressurised CO₂ releases. This modelling accounted for the possible presence of the solid CO₂ phase following expansion to atmospheric pressure. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases. Both the flow rate and the concentrations were found to be predicted accurately.The above validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Trends in causes of offshore releases by severity classification

The Hydrocarbon Release Database (HCRD) contains data on loss of containment events in the UK sector of the North Sea. The data shows a decrease in the annual number of releases. A study was carried out to determine whether statistically significant trends are apparent when categorizing releases by severity and specific cause. It was investigated whether the relative contribution of some causes as compared to all releases, had changed over time.The main conclusion is that over the analysed period (1993–2014), the relative contribution of “Procedures” as a cause for release has decreased with statistical significance. “Design” improvements seem to lead to a reduction in releases too. Finally, “Equipment” was improving at the slowest rate, if at all, until 2005. Since then, it appears to improve as well. These findings are robust, at least for the total set of data, and the releases of Significant severity. For releases of Major severity, the number of incidents is too small to justify any conclusion on trends.The conclusions suggest that over the analysed period improvements in offshore safety have been mainly driven by improvements in management, covering elements like procedures, competence and compliance.     

Inverse calculation approaches for source determination in hazardous chemical releases

Source determination is vital in decision making and emergency planning involving hazardous chemical releases. This work was concentrated on inverse calculation approaches for source determination as well as current trends and future perspectives. In this paper, these different approaches are reviewed by dividing them into two categories: probability modeling methods and optimization modeling methods. The traits of these approaches are comparatively analyzed. Then it is shown how these approaches behave when applied to practical cases, and their feasibility, applicability, stability, and limitation in determining the location and strength are presented. It is argued that when experimenting with potential terrorist attacks involving hazardous chemical releases, observation points should be around the main line of the downwind direction when the source is known; while the uniform distribution of observation points is an efficient solution for unknown incidents. Probability modeling methods are demonstrated to be insufficient during emergency responses due to their lacking of enough prior information of unknown parameters, while optimization modeling methods are efficient and become a new trend in source determination. Findings reflect an urgent need for the development of high-accuracy detectors and further research of data transmission techniques in order to ensure the validity of these approaches.     

Two-phase jet releases,droplet dispersion and rainout I. Overview and model validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of the fourth phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of Phase IV of the JIP was to generate experimental rainout data for non-flashing experiments, and to develop recommendations for the best methodology to predict rainout [total rainout mass and its spatial distribution (‘distributed’ rainout)].Phase IV of the JIP first included rainout experiments by the UK Health and Safety Laboratory (HSL) for sub-cooled releases of water and xylene with a range of orifice sizes and stagnation pressures. See the companion paper II for further details. Secondly model validation was carried out by DNV Software for these experiments using different correlations for the initial droplet size (Sauter Mean Diameter, SMD), i.e. the CCPS SMD correlation and the Phase III JIP SMD correlation. The validation includes flow rates, droplet size, distributed rainout and cloud temperature drop. Subsequently validation was considered for a wider range of experiments from the literature (sub-cooled and superheated releases) for both SMD and total rainout. Adopted rainout methods comprised both methods including explicit modelling of the droplets (using an extended version of Phast dispersion model UDM), as well as more simple methods based on rainout correlations without droplet modelling. Recommendations are made for the most accurate droplet size and rainout modelling. A modified CCPS UDM droplet size correlation has been shown to agree best against experimental rainout data.     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Development of a theoretical framework for the evaluation of risk connected to accidental oxygen releases

A short-cut methodology for a fast estimation of hazards from oxygen releases and the evaluation of safety distances is presented. Starting from a historical survey on accidents involving oxygen releases and consequent scenarios, the approach includes analytical models for the quantification of incremental hazards due to oxygen releases, in non-obstructed areas, both for continuous and nearly instantaneous scenarios, adopting a simple Gaussian dispersion model. An example of the application of the model in a real case-study and relevant quantitative results are presented.     

Modelling of discharge and atmospheric dispersion for carbon dioxide releases

This paper discusses the modelling of the discharge and subsequent atmospheric dispersion for carbon dioxide releases using extensions of models in the consequence modelling package Phast. Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released chemical to occur only in the vapour and liquid phases. As part of the current work these models have been extended to also allow for the occurrence of liquid to solid transition or vapour to solid transition. This applies both for the post-expansion state in the discharge model, as well as for the thermodynamic calculations by the dispersion model. Solid property calculations have been added where necessary. The above extensions are generally valid for fluid releases including CO₂. Using the extended dispersion formulation, a sensitivity study has been carried out for mixing of solid CO₂ with air, and it is demonstrated that solid effects may significantly affect the predicted concentrations.     

Risk assessment methodology for high-pressure CO2 pipelines incorporating topography

This paper presents a risk assessment methodology for high-pressure CO₂ pipelines developed at the Health and Safety Laboratory as part of the EU FP7 project CO2Pipehaz.Traditionally, consequence modelling of dense gas releases from pipelines at major hazard impact levels is performed using integral models with limited or no consideration being given to weather bias or topographical features of the surrounding terrain. Whilst dispersion modelling of CO₂ releases from pipelines using three-dimensional CFD models may provide higher levels of confidence in the predicted behaviour of the cloud, the use of such models is resource-intensive and usually impracticable. An alternative is to use more computationally efficient shallow layer or Lagrangian dispersion models that are able to account for the effects of topography whilst generating results within a reasonably short time frame.In the present work, the proposed risk assessment methodology for CO₂ pipelines is demonstrated using a shallow-layer dispersion model to generate contours from a sequence of release points along the pipeline. The simulations use realistic terrain taken from UK topographical data. Individual and societal risk levels in the vicinity of the pipeline are calculated using the Health and Safety Laboratory's risk assessment tool QuickRisk.Currently, the source term for a CO₂ release is not well understood because of its complex thermodynamic properties and its tendency to form solid particles under specific pressure and temperature conditions. This is a key knowledge gap and any subsequent dispersion modelling, particularly when including topography, may be affected by the accuracy of the source term.     

Modelling three-phase releases of carbon dioxide from high-pressure pipelines

This paper describes the development and experimental validation of a three-phase flow model for predicting the transient outflow following the failure of pressurised CO₂ pipelines and vessels. The choked flow parameters at the rupture plane, spanning the dense-phase and saturated conditions to below the triple point, are modelled by maximisation of the mass flowrate with respect to pressure and solids mass fraction at the triple point. The pertinent solid/vapour/liquid phase equilibrium data are predicted using an extended Peng–Robinson equation of state.The proposed outflow model is successfully validated against experimental data obtained from high-pressure CO₂ releases performed as part of the FP7 CO2PipeHaz project (www.co2pipehaz.eu).The formation of solid phase CO₂ at the triple point is marked by a stabilisation in pressure as confirmed by both theory and experimental observation. For a fixed diameter hypothetical pipeline at 100 bar and 20 °C, the flow model is used to determine the impact of the pipeline length on the time taken to commence solid CO₂ discharge following its rupture.     

From laboratory simulation to scale-up and design of spray barriers mitigating toxic gaseous releases

Simulation of a process by means of physical models at a reduced scale is an essential tool in many application, allowing to perform a large number of experimental runs, so as to obtain a quantitative representation of the involved phenomena, at relatively low cost. Some difficulties can arise when the mathematical model derived from the simulation is applied to a real scale problem, in that the scaling of some empirical coefficients with the system size is not obvious at all. As fluid barrier scaling is a difficult task, still not deeply investigated in the scientific literature, the focus of this study is to translate knowledge from research on this topic into practice for industrial application. Following an extensive and accurate experimental work in wind tunnel, the main parameters determining the effectiveness of containment, absorption and dilution of chlorine releases were determined and a mathematical model is developed. In order to frame proper scale-up strategies, the most important result of this study rests on the explicit formulae giving, as a function of the aforesaid parameters, the single pass efficiency, the global absorption efficiency, and the toxic gas concentration downwind the barrier. In the far field, the gas concentration is practically determined only by the rate of atmospheric dispersion of the mass flow-rate of gas escaping the abatement. The absorption efficiencies are related to the drop size and to the mass transfer coefficients in the gas and liquid phases. The mean drop diameter plays an essential role in the absorption efficiency, since it simultaneously acts on air entrainment, interfacial surface and mass transfer coefficient in the gas phase. The evaluation of the mitigation effect for an industrial installation requires the scaling of the entrainment coefficient experimentally determined from wind tunnel testing. All the scaling criteria needed for adapting the proposed model to the design of a spray curtain suitable for the protection from a chlorine release, are amply discussed presenting some carefully designed simulations. Owing to its rather general structure, the model can be applied to different gaseous releases and/or absorbing solutions, provided that proper values of the parameters related with the chemical and physical absorption of the involved substances be theoretically or experimentally obtained in advance.     

Modelling accidental releases of dangerous gases into the lower troposphere from mobile sources

The article reports the results of different methods of modelling releases and dispersion of dangerous gases or vapours in cases of major accidents from road and rail transportation in urban zones. Transport accidents of dangerous substances are increasingly frequent and can cause serious injuries in densely inhabited areas or pollution of the environment. For quantitative risk assessment and mitigation planning, consequence modelling is necessary.

The modelling of dangerous substance dispersion by standard methods does not fully represent the behaviour of toxic or flammable clouds in obstructed areas such as street canyons. Therefore the predictions from common software packages as ALOHA, EFFECTS, TerEx should be augmented with computational fluid dynamics (CFD) models or physical modelling in aerodynamic tunnels, and further studies are planned to do this.

The goal of this article is to present the results of the first approach of modelling using these standard methods and to demonstrate the importance of the next development stage in the area of transport accident modelling of releases and dispersions of dangerous substances in urban zones in cases of major accident or terrorist attacks.     

Low rate releases of hazardous light gases under semi-confined geometry: A consequence based approach and case-study application

As evidenced by accident statistics, an important factor when considering the safe operation of process plants is the effective mitigation of the effects of gaseous flammable releases, either by a prevention, or a protection approach. A detailed historical analysis was performed considering accidental scenarios associated with the use and management of light gases, starting from raw data selected from FACTS database and analysed by a causal multi-layer method. Results revealed that the major part of the accidental releases involving methane, hydrogen, ethene, ammonia can be attributed to organizational or process/plant immediate causes. As expected, the most frequent scenarios following the release are fire and explosion. We focus our attention on the development of a short-cut method allowing preliminary evaluation of the maximum gaseous build-up under semi-confined conditions, limiting the effects of the fire/explosion scenario to a tolerable level. The limitations of the model that is applied to selected case-studies and require further experimental validation are critically discussed. The results of the application of the model, which can boast of being safe but not disproportionately conservative, can be set as a maximum threshold in proper designing technical measures aiming at limiting the effects to a tolerable level by protection methods, e.g. isolation, venting, suppression and containment.     

Computational fluid dynamics simulations of hydrogen releases and vented deflagrations in large enclosures

This paper presents model predictions obtained with the CFD tool FLACS for hydrogen releases and vented deflagrations in containers and larger enclosures. The paper consists of two parts. The first part compares experimental results and model predictions for two test cases: experiments performed by Gexcon in 20-foot ISO containers (volume 33 m³) as part of the HySEA project and experiments conducted by SRI International and Sandia National Laboratories in a scaled warehouse geometry (volume 45.4 m³). The second part explores the use of the model system validated in the first part to accidental releases of hydrogen from forklift trucks inside a full-scale warehouse geometry (32 400 m³). The results demonstrate the importance of using realistic and reasonably accurate geometry models of the systems under consideration when performing CFD-based risk assessment studies. The discussion highlights the significant inherent uncertainty associated with quantitative risk assessments for vented hydrogen deflagrations in complex geometries. The suggestions for further work include a pragmatic approach for developing empirical correlations for pressure loads from vented hydrogen deflagrations in industrial warehouses with hydrogen-powered forklift trucks.     

Hydrocarbon releases on oil and gas production platforms: Release scenarios and safety barriers

The main objective of this paper is to present and discuss a set of scenarios that may lead to hydrocarbon releases on offshore oil and gas production platforms. Each release scenario is described by an initiating event (i.e., a deviation), the barrier functions introduced to prevent the initiating event from developing into a release, and how the barrier functions are implemented in terms of barrier systems. Both technical and human/operational safety barriers are considered. The initiating events are divided into five main categories: (1) human and operational errors, (2) technical failures, (3) process upsets, (4) external events or loads, and (5) latent failures from design. The release scenarios may be used as basis for analyses of: (a) the performance of safety barriers introduced to prevent hydrocarbon releases on specific platforms, (b) the platform specific hydrocarbon release frequencies in future quantitative risk analyses, (c) the effect on the total hydrocarbon release frequency of the safety barriers and risk reducing measures (or risk increasing changes).     

3-D dispersion model for simulation of accidental toxic gas releases in a metropolitan area

Computational fluid dynamic (CFD) simulations were performed to assess the potential chlorine leak scenario in the super-urban area of South Korea, where the human population density is very high and numerous buildings exist near operational water treatment facilities. Flame acceleration simulator (FLACS) was used to predict the consequence from accidental chlorine releases out of one of the water treatment facilities for the nearby area having a size of 5 km × 3 km approximately. The ability to precisely implement 3-D geometries is crucial for a successful 3-D simulation. Thus, a method was proposed to rapidly and accurately implement geometry by importing computer aided-design (CAD) files provided by a government agency, and processing them using Auto CAD and MicroStation software programs. An accidental release from an 18-ton tank was simulated with three different wind directions to determine the expected evacuation distances. Results from the study showed that the endpoint distances varied depending on the density and arrangement of the buildings. Moreover, we employed physical barriers with varying heights for mitigating the effects of toxic gas releases and simulated how effectively they decreased the concentration of released chlorine.