An Enzymatic Method for Harvesting Functional Melanosomes after Keratin Extraction: Maximizing Resource Recovery from Human Hair

Journal of Polymers and the Environment - Hair contains about 80% keratins and 1–3% melanin packaged in melanosomes. Both of these are high-value and functional raw materials that have...     

Preparation of Lignin Sulfonate Based/Organo-Montmorillonite Composite Hydrogel for Adsorbing Methylene Blue from Aqueous Solution

Journal of Polymers and the Environment - In this study, an environmentally friendly lignin-based hybrid hydrogel (LS/OMMT) was prepared by grafting of acrylamide (AM) and acrylic acid (AA) onto...     

从水溶液中分离回收醋酸方法的评述

评述了从水溶液中分离回收醋酸的普通精馏法、共沸精馏法、酯化法和溶剂萃取法，具体分析了各种方法 特点及适用范围。建议在工业上对较高浓度的醋酸用低沸点溶剂萃取－共沸精馏联合法，对低浓度醋酸溶液采用有机胺溶剂萃取法进行分离。     

Facile Preparation of Chitosan Films for High Performance Removal of Reactive Blue 19 Dye from Aqueous Solution

This study aimed at finding effective strategies for high-performance removal of reactive blue 19 (RB19) dye from aqueous solution. Chitosan (CS) films had been prepared by using solvent casting with mild drying for this purpose. The CS films were characterized by X-ray diffraction, field-emission scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The performance of RB19 removal using CS were evaluated by varying contact time, solution pH, initial dye concentration, and adsorbent dosage. Adsorption isotherms, kinetics, and desorption were investigated by batch experiments. Results showed that CS films exhibited the optimal adsorption performance for RB19 removal and high maximum adsorption capacities of RB19, which were 799 and 822.4 mg g^?1 at 20 and 40 °C, respectively. Adsorption kinetic data were well described by the pseudo-second-order kinetic model. FTIR analyses further indicated that interactions between RB19 and the CS film occurred during adsorption. The CS films also exhibited satisfactory desorption of RB19 at about 80 % after 30 min of desorption at pH 11. Our study demonstrated that the CS films can be easily prepared and applied for effective removal of RB19 in treatment of wastewater.     

污泥活性炭的制备及其对溶液中Cr6+的吸附

以城市污水厂剩余污泥为原料,采用ZnCl2作活化剂,热解制备污泥活性炭。实验结果表明,制备污泥活性炭的最佳条件热解温度为550℃,ZnCl2溶液浓度为3mol／L,ZnCl2溶液体积与污泥质量比（mL／g）为2．5：1,热解时间为25min。用所制备的污泥活性炭吸附溶液中的Cr6＋最佳吸附条件为：吸附时间90min,Cr6＋初始质量浓度50mg／L,污泥活性炭加入量0．2g,溶液pH2,在此条件下,Cr6＋去除率达99．9％。污泥活性炭对溶液中Cr6＋的吸附等温线属于I型,等温吸附方程可用Langmuir模型和Freundlich模型来拟合。     

Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by Combined Use of melB Tyrosinase and Chitosan Beads

In this study, melB tyrosinase was applied for enzymatic removal of linear and branched p-alkylphenols from aqueous solutions. First, systematic studies were carried out to estimate the effects of the process parameters such as the temperature, pH value, and enzyme dose on quinone conversion of p-cresol as a model phenol compound. A variety of p-alkylphenols were removed from aqueous solutions through the tyrosinase-catalyzed quinone conversion and subsequent nonenzymatic adsorption of quinone derivatives on chitosan beads at pH 6.0 and 30 °C under the optimum conditions determined for p-cresol. The % removal values of 98–100 were obtained for p-n-alkylphenols. Branched p-alkylphenols with a weak estrogenic activity containing 4-tert-butylphenol and 4-tert-pentylphenol, which underwent no quinone conversion by commercially available mushroom tyrosinase in the absence of H₂O₂, were also effectively removed by further increasing either the melB tyrosinase concentration or the amount of added chitosan beads. The present technique is much effective in the fact that a series of reactions rapidly progress under mild conditions and the chitosan beads can be readily separated from the reaction medium after the enzymatic treatment.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution

In this study, a novel magnetic Cr(VI) ion imprinted polymer (Cr(VI)-MIIP) was successfully synthesized and used as a selective sorbent for the adsorption of Cr(VI) ions from aqueous solution. It can be synthesized through the combination of an imprinting polymer and magnetic nanoparticles. The high selectivity achieved using MIIP is due to the specific recognition cavities for Cr(VI) ions created in Cr(VI)-MIIP. Also, the magnetic properties that could be obtained using magnetic nanoparticles, helps to separate adsorbent with an external magnetic field without either additional centrifugation or filtration procedures. The magnetic Fe₃O₄ nanoparticles (MNPs) were synthesized using an improved co-precipitation method and modified with tetraethylorthosilicate (TEOS) before imprinting. The magnetic Cr(VI) ion imprinted polymer was prepared through precipitation copolymerization of 4-vinylpyridine as the complexing monomer, 2-hydroxyethyl methacrylate as a co-monomer, the Cr⁶⁺ anion as a template, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the presence of modified magnetite nanoparticles. This novel synthesized sorbent was characterized using different techniques. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity, and reusability. The results showed that the maximum adsorption capacity was 39.3 mg g^?1, which was observed at pH 3 and at 25?°C. The equilibrium time was 20 min, and the amount of adsorbent which gave the maximum adsorption capacity was 1.7 g L^?1. Isotherm studies showed that the adsorption equilibrium data were fitted well with the Langmuir adsorption isotherm model and the theoretical maximum adsorption capacity was 44.86 mg g^?1. The selectivity studies indicated that the synthesized sorbent had a high single selectivity sorption for the Cr(VI) ions in the presence of competing ions. Thermodynamic studies revealed that the adsorption process was exothermic (\(\Delta H\)?<?0) and spontaneous (\(\Delta G\)?<?0). In addition, the spent MIIP can be regenerated up to five cycles without a significant decrease in adsorption capacity.     

Dense Polyacrylic Acid-Immobilized Polypropylene Non-woven Fabrics Prepared Via UV-Induced Photograft Technique for the Recovery of Rare Earth Ions from Aqueous Solution

Journal of Polymers and the Environment - In this work, a novel and easy-separating rare earth adsorbent (PAA/PPNWF) was successfully synthesized by generating dense polyacrylic acid (PAA) on the...     

Converting Waste Polystyrene into Adsorbent: Potential Use in the Removal of Lead and Cadmium Ions from Aqueous Solution

Waste of polystyrene was converted into a cation exchange resin and was used for the removal of lead and cadmium metals from aqueous solution. Wastes consisting of coffee cups were crushed into small pieces and immersed into a solution of sulfuric acid in order to attach sulfonic group to polymer chain, these groups are responsible for the exchange properties of the modified plastic. The cation exchange capacity (CEC) was determined and was comparable to commercial exchangers. The adsorption isotherms of resin with synthetic wastewater containing lead and cadmium ions were tested. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Langmuir isotherms.     

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na⁺-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na⁺-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na⁺-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.     

Biosorption of Hg(II) Ions From Aqueous Solution Using the Aquatic Weed Water Hyacinth With Equilibrium and Kinetic Modeling

The potential for biosorption of Hg(II) ions from aqueous solutions using water hyacinth was studied. The effect of the retention period (0, 1, 3, 7, and 15 days), pH (3, 5, 7, and 9), initial concentration of Hg(II) ions (5, 10, and 15 mg/L), and organic loading rate (25, 50, and 75 percent) on biosorption were investigated. The physicochemical parameters were also analyzed at various concentrations of Hg(II) ions before and after treatment. The maximum biosorption rate was obtained at 15 days with the initial concentration of 10 mg/L at a pH of 7 and organic loading rate of 50 percent. The maximum biosorption capacity of both water hyacinth roots and shoots were 5.5 mg/L and 3.8 mg/L, respectively. The Hg(II) biosorption data were analyzed using the first‐ and second‐order kinetic models. Pseudo second‐order kinetics was considered the most appropriate model for predicting the biosorption capacity of both water hyacinth roots and shoots, and the modeled results were compared to the experimental results. Langmuir and Freundlich isotherms were used to evaluate the experimental data, and their constants were derived. Biosorption equilibrium data were best described by the Langmuir isotherm model followed by the Freundlich model. © 2013 Wiley Periodicals, Inc.     

Facile Fabrication of Silver Nanoparticles Grafted with Fe3O4-Chitosan for Efficient Removal of Amoxicillin from Aqueous Solution: Application of Central Composite Design

Journal of Polymers and the Environment - In this study, Fe3O4 nanoparticles and chitosan along with silver nanoparticles was synthesized to apply for the rapid and simple removal of amoxicillin...     

Evaluation of the Biosorption Characteristics of <Emphasis Type="Italic">Tremella fuciformis</Emphasis> for the Decolorization of Cationic Dye from Aqueous Solution

The present work reported on the evaluation of the methylene blue dye biosorption property of Tremella fuciformis under different experimental conditions. Batch mode experiments were carried out using different experimental parameters such as initial pH, dye concentration, biosorbent amount, contact time and temperature. Four widely used kinetic models were used to elucidate the biosorption kinetics. And the kinetic analysis illustrated that the experimental data best followed the pseudo-second-order kinetic model. Biosorption equilibrium was also investigated using four widely used isotherm models. The results indicated that the experimental equilibrium data fitted very well with Langmuir isotherm models. Thermodynamic analysis of biosorption processes was found to be feasibility, spontaneous and exothermic nature of MB biosorption. These results indicated that T. fuciformis would be a high effective and environmental friendly biosorbent for MB removal from aqueous solution.     

干式还原法处理铬渣的机理及应用

采用干式还原法处理铬渣。在多级还原焙烧炉中于高温条件下,将过量的煤粉和铬渣混合后与O₂反应,经冷却、擦磨、磁分离后可得到铁精砂和处理后铬渣。介绍了干式还原法处理铬渣的机理和工艺参数。以3种铬渣试样进行应用试验,经多级还原焙烧—磁分离后,铬渣中的Cr（Ⅵ）质量浓度为0.05~0.18 mg/L,低于HJ/T301—2007标准中的要求（0.50 mg/L）,可作为建材原料加以利用。磁分离得到的铁精砂产品中铁的质量分数大于50%,铁回收率大于70%。目前设计的多级还原焙烧炉单炉处理铬渣能力为150 kt/a,标煤消耗为35 kg/t,处理成本约为60元/t。     

Epichlorohydrin Crosslinked 2,4-Dihydroxybenzaldehyde Schiff Base Chitosan@SrFe12O19 (EP-DBSB-CS@SrFe12O19) Magnetic Nanocomposite for Efficient Removal of Pb(II) and Cd(II) from Aqueous Solution

Journal of Polymers and the Environment - In this paper, new epichlorohydrin crosslinked 2,4-dihydroxybenzaldehyde Schiff base chitosan@SrFe12O19 magnetic nanocomposite (EP-DBSB-CS@SrFe12O19) was...     

Ggum-poly(Itaconic Acid) Based Superabsorbents Via Two-Step Free-Radical Aqueous Polymerization for Environmental and Antibacterial Applications

Ggum-based conducting hydrogels possessing dye removal and antibacterial property were developed by two-step free-radical aqueous polymerization method. Conductivity was introduced with polyaniline (PANI) chains incorporated within the crosslinked network of Ggum-poly(itaconic acid) superabsorbent. The material properties of the synthesized samples were characterized using FTIR spectroscopy, thermal analysis and scanning electron microscopy techniques. Results showed that synthesized samples exhibited the best antibacterial activity against Gram-positive bacteria. Synthesized samples were found to be effective in removal of toxic methylene blue (MB) dye from the waste water. The adsorption kinetics of superabsorbents has been described by using pseudo first and pseudo second order kinetics models. Furthermore, application of hydrogels to improve the water retention properties of different soils was also studied for agricultural purpose.     

炼化企业SO2减排潜力分析

介绍了炼化企业的SO2排放源,建立了自备电厂SO2减排量数学模型,研究了SO2减排量对各影响因素的敏感度,分析了炼化企业SO2减排潜力.自备电厂燃煤锅炉SO2减排措施包括:增设脱硫设施,改进现有脱硫工艺,提高脱硫效率;关停小机组;降低燃料中硫含量.生产过程中催化裂化催化剂再生烟气的脱硫减排措施包括:降低原料硫含量;使用...